Problem by setting the page_items value into session using javascript

Similar Questions

• How can I fix my Windows 7 file association problem and set the default values for the correct file?

  Files do not open the appropriate program

  The simplest is to restore your system settings for a time before the invalid associations have been set.

  1 type the word restore in your Start menu, then choose restore system files and settings...
  2 - Click Next, choose a date before the problem happens again, and then click Next
  3. about 2 minutes later, you're all set.

• How to set the minimum value of a graphic waveform window?

  I have a graphics property of waveform "minimum value", but the graph is not take the value that I gave him. He tends to zero, as well as the first two sliders that I put on the graph. The maximum value "will be" no problem, just like the second slider value. Everyone knows about this problem? Here's a screenshot...

  Is there a reason why my chart does not have what I have to say?

  Thank you

  Sometimes you may have problems if the new minimum is higher than the maximum of old.  Try to write at least again in another node in property after you set the maximum value

  Without seeing your VI and some parameters of the example, (old max and min) new max and min, it is otherwise difficult to say.

• < af:valueChangeListener > sets the new value back to the old value

  Hi people,

  I'm trying to implement a search bar with < af:inputText > and < af:selectOneListbox >.

  When the user selects an item in the listbox control, the inputText will be updated. After hitting the "ENTER" key, the search action will be taken.

  The valueChangeListener will be called when the selection of items in the listbox.

  The problem can be described by the following two cases:

  (1) the user types something in the inputText box and hitting 'ENTER' key for a search. The valueChangeListener is called and sets the value of the string user typed.

  (2) the user selects something in the list box, each time changes the selection in the listbox control, the valueChangeListener will be called. But when the user presses the "ENTER" key, the valueChangeListener is still called, and it sets the return value to the old value. For example, the list has 'a ', ' b', 'c '. The user selects 'a', then 'b '. After hitting the "ENTER" key, the value in the inputText is replaced with "a".

  The code is as follows:

  Code in .jspx:

  < af:inputText value = "#{pageFlowScope.word} '"

  autoSubmit = 'true' immediate = "true".

  valueChangeListener = "#{pageFlowScope.update}" / >

  < af:selectOneListbox valuePassThru = "true" >

  < f: selectItems value = "#{pageFlowScope.items}" / >

  < / af:selectOneListbox >

  Bean managed code:

  publicvoid update (ValueChangeEvent event) {}

  This.Word = event.getNewValue (m:System.NET.SocketAddress.ToString ());

  }

  I don't know how the valueChangeListener behaves like that.

  Could someone provide me with clues or tips?

  Thank you

  Carl

  Carl, tell us your version of jdev, please!

  There is something wrong in your implementation. I do not see an inputText field who's value stored in a variable pageflowscope "word". This field has an attached valuechangelistener which is obsolete, because the field already stores its value in the variable pageflowscope. The same that you are trying to do in the valuechangelistener. So I don't see a selectonelistbox which does not store the value selected anywhere because it doesn't have the value property for it. There isn't an attached valuechangelistener so I wonder how your valuechangelistener is called at all when you change the selectoneListBox.

  Timo

• How to set the default value of the component selectOneChoice in the table to the ADF

  Hi all

  I use jdev 11.1.1.6.0 version.

  I used an adf table in which an attribute is selectOnceChoice.

  To create the table and selectOneChoice I used the data control java bean.

  and drag and drop a table and after that I have drag and drop one of the attributes as selectonechoice and linked with the return of the method list as < key, value > pair.

  I want the default value to select only one option in each attribute rows.

  I checked with simillar issue on post next, but not yet resolved.

  My jspx code is

  
  <af:column id="c11"
                                           headerText="Invoice To" >
                                      <af:outputText value="#{row.invoiceTo}" id="ot19"/>
  <af:selectOneChoice value="#{bindings.invoiceTo.inputValue}"
                                                      label="#{bindings.invoiceTo.label}"
                                                      required="#{bindings.invoiceTo.hints.mandatory}"
                                                      shortDesc="#{bindings.invoiceTo.hints.tooltip}"
                                                      id="soc3"
                                                      autoSubmit="true"
                                                      valuePassThru="true">
                                    <f:selectItems value="#{bindings.invoiceTo.items}"
                                                   id="si4"/>
                                  </af:selectOneChoice>
  </af:column>
  
  
  

  where invoiceTo is the table attribute and the invoiceTo attribute is dragged and dropped as a SOC function list Source data mapped data value with the List attribute

  and the display attribute

  Data value = invoiceTo List = lovMasterKey attribute

  Display attribute = lovMasterValue

  that list is maintained at < lovMasterKey, lovMasterValue >

  According to the value of invoiceTo line, it should show as default value is selectOneChoice, but its showing no not as a default value.

  Please, help me how set the default value of selectOneChoice in the table according to each value line invoiceTo.

  Thank you all for the help on this issue.

  Problem has been resolved.

  Reason for this was used

  It is solved using code used for the list built for selectoneChoice more

    List lovMasterList = new ArrayList();
  
  SelectItem siItem = new SelectItem();                      
  
  siItem.setLabel(objAfCmnLovMasterListVO1.getLovMasterValue());
  
  siItem.setValue(objAfCmnLovMasterListVO1.getLovMasterKey());
  
    lovMasterList.add(siItem);
  

  Now, I used the code where the line below. InvoiceTo is the key and row.invoiceToItems are the list of articles for selectOneChoice.

  Thank you very much...

• Convert the column values into buckets

  Hello
  
  Please help me to convert the column values into buckets.
  I have the values of the columns in the following way.
  
  
  Age of Orderdate * 9 10 12 14 15 18 19 20 21 22 26 27 28 29 33 34 40 45 * and so on
  
  
  
  But the requirement is the column values should be displayed in form
  
  Age by order date * 15 1 2 3 4 5 6 7 8 9 10 11 - 16-20 21-25, 26-30 30 + *.
  
  
  Please someone give me the solution.
  
  Thanks in advance.
  
  Hervé Rama

  Hi Richard,

  Just to double check, you have Setup buckets for 1, 2, 3, 4, 5, 6, 7 and 8 individually (each with a fair value). The problem is that you simply do not have all data fall into buckets above, correct?

  If this is the case, it looks like has been answered your original question. If so, the label would assign 'Proper' points by clicking on the button label correct next to the appropriate response and open a new thread with your new question. The reason why I say this is it will help other people who have a similar bucket question to your solution, without complicating the issue with subsequent questions.

  If you can post a separate thread, I'd be more than happy to help you with your secondary problem.

  Best regards

  -Joe

• Set the first value after the select statement

  Hello
  
  I have a problem here.
  
  After you run the statement select, it'll come to me:
  
  COM
  DLY
  EXC
  NRD
  RDY
  
  
  
  My question: How can I set the first value instead of 'COM' in "EXC"?
  
  Thank you.

  Hello
  Where you use this instead:

  select *
  from
  (
  select col_name
  ,case when col_name='EXC' then 1 else 0 end as "id"
  from table_name
  )
  order by "id" desc
  

• Extension of EO or CO to set the default values?

  Hi all!

  I spread an EO, ExtBankAccountsEOImpl, which contains the bank details of a provider.

  When I create a new retail bank, I want to set the default value of some fields (for example the currency)

  According to the nationality of the supplier (all fields are null by default oracle). See below.

  

  Is this possible with EOs? Can the EO extended somehow get their hands on the party_id?

  Or do I have to extend the CO instead?

  Best regards

  Christian

  Christian,

  Thus, your EO extension works very well, no?

  You need to check the standard code (controller and methods of AM which is called by the CO) and see if the party_id is stored as part of the operation or not. If so, you should be able to get the values in extended OS.

  If this isn't the case, you must extend the CO.

  Note: Changes made by extension EO EO will affect all pages using the OS, if any other page exists.

  I hope this helps.

  See you soon

  AJ

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you

• How to set the initial value programmatically in af:selectOneChoice

  Hi all

  How to set the initial value programmatically in af:selectOneChoice

  filled with view object instance, but I want to show the value initial programmactically

  This can help you: Re: how to set the default value of the component selectOneChoice in ADF

  and the default af:selectOneChoice programmatically from backing bean

• How to set the return value of the method to the /outputText inputText field

  Hello

  How to set output return value method of a /outputText adf inputText field

  Concerning

  sevanan

  Well put method's return value to a managed bean variable.

  Create a variable in the bean and set the return value to this variable.

  the inputText and outputTextValue to this managedBean.variable value

  That's all...

  and add partial trigger for inputText programmaticly

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• Call a method before the following operation to set the selected values

  Use case: I display a VO as an ADF multiple checkbox select. This VO is the detail of a master/detail. I managed to store the selection state in a bean managed on autoSubmit. Then the user navigate to the record of the master, and then goes back to the previous record. The buttons next and previous were created using operations in data controls. I want to back up the State of the selection by clicking previous or next.

  There are a lot of tutorial on how to get the selected values, but none on how to set the selected values. How would you do it?

  11 GR 1 material JDev

  What I ended up doing:

  1 redefine listener action for the navigation buttons

  {} public void nextQuestion (ActionEvent event)

  saveSelectedState();

  navigateQuestion ("Next");

  restoreSelectedState();

  }

  {} private void navigateQuestion (string operation)

  OperationBinding operationBinding = ADFUtils.findOperation (operation);

  operationBinding.execute ();

  }

  2 Save and restore the selection state using bindings

  Guava Multimap

  Private ListMultimap selectedIndices.

  private void saveSelectedState() {}

  Get id question

  DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

  Question of rank = questionBinding.getCurrentRow ();

  Number questionId = (Number) question.getAttribute ("Id");

  JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

  int [] valueIndices = listBinding.getSelectedIndices ();

  selectedIndices.putAll (questionId, Ints.asList (valueIndices));

  }

  private void restoreSelectedState() {}

  Get id question

  DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

  Question of rank = questionBinding.getCurrentRow ();

  Number questionId = (Number) question.getAttribute ("Id");

  int [] valueIndices = Ints.toArray (selectedIndices.get (questionId));

  JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

  listBinding.setSelectedIndices (valueIndices);

  }

• ODI 11 g | How to set the default value in the Interface mapping?

  Hello
  I m interpreting data OID of Oracle DB load target FOR Hyperion Essbase.
  Its my requirement to set the default value for any size target source system it becomes same record for a specific column.
  I thought that it would be fixed in the Interface, but I was not able to do.
  
  Example:
  Target Essbae Dimension
  Size of account must have the value "FixAccount".
  Dimension of the year must have the value "FY13.
  Dimension of the view must have the value "ActiveView.
  
  looking for your
  
  Concerning
  Sher

  Yes

• How to set the threshold value for single tablespace in the 11g grid control

  Hello
  
  I want to set the threshold value for a single tablespace in the 11g grid control,
  Please give me a navigation path.

  Sandy wrote:
  Can you please give me the full navigation path?

  go to the target--> databases
  Select the database that you want to set this alert to
  Link select settings and policy settings