problem connecting to the database (master repository)

Similar Questions

• Problem connecting to the database

  I installed 10.2 of the database under vista.
  
  I can connect to the database using the DBconsole.
  
  I can connect when I say, sqlplus "virtue sysdba".
  
  But I have the problem when I say, sqlplus sys@ecentric as sysdba
  He lifts the ORA-12514 error message: TNS:listener is not currently of service requested in connect
  descriptor of
  
  Kindly tell me where I'm wrong.
  
  Listener:
  
  ECENTRIC =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.x.xxx) (PORT = 1521))
  )
  )
  
  SID_LIST_ECENTRIC =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  TNSnames.ora
  
  ECENTRIC =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.x.xxx) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ecentric)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  SQLNET.ora
  
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias ECENTRIC
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Production
  Start date 26 - AUG - 2008 12:12:20
  Uptime 0 days 1 hour 0 minutes 56 seconds
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\ecentric.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xxx.x.xxx) (PORT = 1521)))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'ecentric.rnhub.com' has 1 instance (s).
  Instance "ecentric" READY State, has 1 operation for this service...
  Service 'ecentricXDB.rnhub.com' has 1 instance (s).
  Instance "ecentric" READY State, has 1 operation for this service...
  Service 'ecentric_XPT.rnhub.com' has 1 instance (s).
  Instance "ecentric" READY State, has 1 operation for this service...
  The command completed successfully

  TNSnames.ora
  (SERVICE_NAME = ecentric)

  Use the fully qualified name

  ecentric.rnhub.com

• problem connecting to the database using dbclient

  Can someone help to solve the following question
  
  The following error occurred when connecting to the database when connecting dbclient to the database on linux from windows
  . TNS dbclient names has been configured with the SID and IP address of the machine from database
  
  ERROR:
  ORA-12560: TNS:protocol adapter error

  Could you share your tnsnames.ora file

  And refer to this topic

  http://forums.Oracle.com/forums/thread.jspa?MessageID=9142058�

• Problems connecting to the database msaccess 32 bit on 64 bit 11G

  Here's the question:

  I have a database to 9i (32-bit windows) with a connection hsodbc to an old one to an Access database so once the schema can see and copy data from an access database has said, everything works fine.

  I'm about to move the 64 bit 11.2.0.3 on windows 2008 server 64-bit database, database is migrated and tested ok.

  The problem comes from the connection dg4odbc, I created the AS400 database connections and they are ok, but I set up an ODBC for the access database, using the 32-bit ODBC interface as MS recommends, but I always get this error message:

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  ORA-02063: preceding 2 lines of RADERDB

  According to MS technet, it is do not use the c:\Windows\SysWOW64\odbcad32.exe to set up the ODBC connection, but I used only executable, when I use the ordinary 64-bit ODBC admin I can't even see msaccess drivers first.

  The funny thing is, when I point the tnsnames.ora on the old server 9i entry, it uses the ODBC connection and then the dblink 11G and then works fine. However, it is a band-aid solution and I want to get everything works from the new production database server.

  Any suggestions?

  Thanks in advance...

  The message means you are using a 32-bit with a 64-bit program ODBC driver. It does not work. If you want to connect with the 64-bit DG4ODBC, you must use a 64-bit ODBC driver. A package is available on the Microsoft Technet site (AccessDatabaseEngine_x64 - http://www.microsoft.com/en-gb/download/details.aspx?id=13255 ) that ships the drivers ODBC 64-bit for their Excel/Access programs.

  Please note that product installation gateway 32-bit on Windows 64-bit is NOT supported.

  -Klaus

• SGC does not start - unable to connect to the database

  Hi all

  My development/test environment is unbootable SGD. This has really we stopped in our tracks...

  He'll start the WebTier, but CMS will not come to the top:

  [Journal of the oracle@ora-emcc] $ $OMS_HOME/bin/emctl status SGD

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  WebTier is in place

  Oracle Management Server does not work for the following reason:

  Unable to connect to the repository database. SGD will be automatically restarted once he identifies database and the listener are on the rise.

  Try to check the details SGD results in an error as well:

  [config oracle@ora-emcc] $ $OMS_HOME/bin/emctl status who-details - sysman_pwd $SYSMAN_PWD

  Oracle Enterprise Manager Cloud control 12 c Release 2

  Copyright (c) 1996, 2012 Oracle Corporation.  All rights reserved.

  Exception in thread "main" java.util.MissingResourceException: can't find bundle for the base oracle.security.jps.internal.common.resources.keystore.KeyStoreResources, locale name

  at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1427)

  at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1250)

  at java.util.ResourceBundle.getBundle(ResourceBundle.java:952)

  to oracle.security.jps.util.JpsBundle. < init > (JpsBundle.java:70)

  at oracle.security.jps.util.JpsBundle.getResourceBundle(JpsBundle.java:151)

  at oracle.security.jps.util.JpsBundle.getResourceBundle(JpsBundle.java:106)

  at oracle.security.jps.JpsLocalizableException.getResourceBundle(JpsLocalizableException.java:157)

  at oracle.security.jps.JpsLocalizableException.getLocalizedMessage(JpsLocalizableException.java:140)

  at oracle.security.jps.JpsLocalizableException.getLocalizedMessage(JpsLocalizableException.java:131)

  at java.lang.Throwable.toString(Throwable.java:343)

  at java.lang.String.valueOf(String.java:2826)

  at java.lang.StringBuilder.append(StringBuilder.java:115)

  at java.lang.Throwable.printStackTraceAsCause(Throwable.java:536)

  at java.lang.Throwable.printStackTraceAsCause(Throwable.java:545)

  at java.lang.Throwable.printStackTraceAsCause(Throwable.java:545)

  at java.lang.Throwable.printStackTrace(Throwable.java:516)

  at org.apache.log4j.spi.ThrowableInformation.getThrowableStrRep(ThrowableInformation.java:59)

  at org.apache.log4j.spi.LoggingEvent.getThrowableStrRep(LoggingEvent.java:342)

  at org.apache.log4j.WriterAppender.subAppend(WriterAppender.java:304)

  at org.apache.log4j.RollingFileAppender.subAppend(RollingFileAppender.java:234)

  at org.apache.log4j.WriterAppender.append(WriterAppender.java:159)

  at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:230)

  at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:65)

  at org.apache.log4j.Category.callAppenders(Category.java:203)

  at org.apache.log4j.Category.forcedLog(Category.java:388)

  at org.apache.log4j.Category.error(Category.java:319)

  at oracle.sysman.emctl.oms.PrintOMSSetupInfo.main(PrintOMSSetupInfo.java:240)

  In the WebLogic administration Console, I see the BEEP, EMGC_ADMINSERVER, and EMGC_OMS1 are all in the State Running and health Ok.

  Our servers SGD and OMR are (and have always been) 2 different machines. The database on OMR has always been (and is currently) high and available.

  Checking that I can connect to the database of repository on the SGD server OMR:

  [oracle@ora-emcc ~] $ sqlplus sysman / $SYSMAN_PWD@ora-emccdb:1521 / emccdb

  SQL * more: version 11.1.0.7.0 - Production on Thu Nov 10 23:34:53 2013

  Copyright (c) 1982, 2008, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL >

  Any suggestion will be highly appreciated.

  Ed

  Hi Mathieu,

  Thanks for the comments. I just got an update of Oracle on the SR with a few more instructions on different things to try/run.

  I met problems with Weblogic in step 1 and could not understand the multitude of possible causes. After some googling I found others who has ended up just restart that did the trick. It worked for me as well as far as I can see now. I'll do some tests to check, but well.

  Thank you

  Ed

• Having problems with SQL Developer connection to the database on a LINUX machine

  Having problems with SQL Developer connection to the database on a LINUX machine
  Hello
  I am trying to connect my machine to windows 7 Home premium to an oracle database 11 g on RedHat 5 machine using SQL Developer. I got this error on SQL Developer
  Status: Failed - Test has failed: the network adapter could not establish the connection
  
  
  on Linux
  

  LSNRCTL> status
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                03-APR-2013 16:13:13
  Uptime                    7 days 22 hr. 16 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
  Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "orc11g" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11gXDB" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11g_XPT" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  The command completed successfully
  LSNRCTL>

  and TNSPING
  

  tnsping 172.x.x.x
  
  TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  
  Used EZCONNECT adapter to resolve the alias
  Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
  OK (0 msec)
  [oracle@ltebilling ~]$

  Tnsnames.ora on Linux,
  

  ORC11G =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orc11g)
  )
  )

  Listner on Linux,
  

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
  (PROGRAM = extproc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  )
  )

  hosts/ect/Linux,
  

  # Do not remove the following line, or various programs
  # that require network functionality will fail.
  127.0.0.1               localhost.localdomain localhost
  172.x.x.x             LTEBilling

  and there is no problem to ping linux from windows
  
  Published by: user11309581 on April 11, 2013 15:16

  user11309581 wrote:
  as I have already desciped earlier, I can't connect to the server throw Linux my Windows SQL Server, with error message below.
  tatus: failed - Test has failed: the network adapter could not establish the connection

  It's too generic to mean anything. The application is hidden the real error message. You got when you did the tnsping and obtained "TNS-12535: TNS:operation has expired. Now THAT's an error.

  This indicates a problem firewall and routing. You said earlier you could ping the server, but now we see tnsping fails. Two different protocols of usage, so that both the successful ping turns out a valid physical path, it guarantees not that all traffic will pass. What happens with

  c:\ telnet 172.x.x.x 1521
  

• not able to connect to the database users

  Hello
  
  
  OS Oracle Solaris on SPARC (64-bit)
  database version 10.2.0.2
  
  
  
  There was a problem, one of the database, most of the applications were unable to connect, only 1 or 2 managed applications to connect, which totalled around 4 to 6 hours. Once the database has been recycle everything was ok, so what could be the reason? I have too many words from sr oracle, oracle specified as there was a sql with 13000 executions, also as 2 users have tried to update the same row in the table, so that users must commit frequently, just read the lines highlighted. My question is if there is a conflict of line, that would restrict other applications to connect to the database. And after reboot, everything was normal. I m wondering as is the resource_limit or max execeeded processes at this time this is why not able to sign in as user applications oracle unable to generate new processes.
  
  As I mentioned in the SR #, users could not establish connection to recycling of the database at all. So what is the root cause?
  
  
  
  
  Support of Oracle - December 06, 2010 16:01:13 GMT - 05:00 [Notes]
  
  Generic note
  ------------------------
  Report from the WORKING REPOSITORY for
  
  
  Snap Id Snap time Sessions sliders/Session
  BEGIN Snap: 14408 26 November 10 17:00:18 258 32.0
  End Snap: 14413 26 November 10 22:01:02 185 28.0
  Elapsed time: 300,74 (min.)
  DB time: 31,230.47 (min.)
  
  
  
  
  Top 5 timed events
  
  Event waits time Avg Wait (ms) % Total call time wait class
  enq: TX - 633 699 1 855 919 line lock conflict 99.0 2 929 Application < < < < # 1.8 million secondsdb file sequential read 2 434 765 11 577 5.6 user I/O
  Time CPU 7 758.4
  db file parallel write 269 025 1 012 4.1 system I/O
  db file scattered read 227 528 889 4.0 user I/O
  
  
  Time elapsed (s) hour (s) of the CPU executions Elap by Exec (s) % Total DB SQL SQL SQL text Module Id at the time of
  1 530 609 25 13 497 81,68 113.40 b3fzxpwsmj044 llserver@linkvprad1 (TNS V1 - V3) update KID set ID = ID + A1: where...
  
  
  single command which is close to 1.8 million seconds.
  
  update of b3fzxpwsmj044 KID set ID = ID + A1: where IDType = 0
  
  Segments of line lock waits
  Capture shows the line lock % % expected for each upper segment by report
  with the line total lock waits for all segments, captured by the snapshot
  Tablespace name object name subobject name owner Type obj. line lock waiting for Capture %
  TAB_ADM TAB_DATA KID TABLE 208 95,41 < < < < # object with line lock waits for even that above command
  
  
  UPDATE
  ========
  Hello
  
  It seems that many people have tried to run the same day order at the same time.
  (more than 13,000 executions)
  
  Update KID set ID = ID + A1: where IDType = 0
  
  and segment shows the same table.
  
  It is an application problem, two people can not update the same rows at the same time.
  OR
  After that the users update must initiate more timely work.

  sb92075 wrote:
  ..., but this has NOTHING to do with the connection problem & or not posted anything else.

  Not so sure. Is this connection to database, or application? The OP wrote "+ one of the basis of most of the applications were not able to connect, only 1 or 2 applications has managed to connect +", don't know what that means exactly, depends on how the application manage the connection. It can start with the search/update of this table where the problem may come from.

  Nicolas.

• Unable to connect to the database of the OBIEE 11g improved SPR

  Hello
  
  I am faced with questions about the RPD - 11 G upgrade. I used the batch ua (Upgrade Wizard) program to upgrade the RPD and catalogue. The upgrade was successful, and the new set of upgrade RPD and obtained catalog loaded in servers.
  
  When I try to view the physical layer data I get the error message "connection failed."
  
  I also noticed that the Type of data in the physical layer (right-click on the Database object) changed to Oracle 10 g 2. The RPD, before the upgrade was Oracle 10 g 2 / 11g. My main is on 11G.
  
  I advanced and changed the type of Oracle11g database in the RPD upgraded. Now when I click on "Show data", I get a different error
  
  "TNA 46028 failed to get the path of the DLL for the CLI 10 g / 11g comes from the NQSConfig.ini file."
  
  In the Config file I have sub sections:
  -----
  [DB_DYNAMIC_LIBRARY]
  
  ODBC200 = nqsdbgatewayodbc;
  ODBC350 = nqsdbgatewayodbc35;
  Oci8 = nqsdbgatewayoci8;
  OCI8i = nqsdbgatewayoci8i;
  OCI10g = nqsdbgatewayoci10g;
  DB2CLI = nqsdbgatewaydb2cli;
  DB2CLI35 = nqsdbgatewaydb2cli35;
  NQSXML = nqsdbgatewayxml;
  XMLA = nqsdbgatewayxmla;
  ESSBASE = nqsdbgatewayessbasecapi;
  OracleADF = nqsdbgatewayoracleadf;
  OracleADF_HTTP = nqsdbgatewayoracleadf;
  HyperionADM = nqsdbgatewayadm;
  -----
  All DLLs referenced above can be found under C:\Middleware\Oracle_BI1\bifoundation\server\bin
  
  I noticed that there is no OCI11g entry in the NQSConfig or in the C:\Middleware\Oracle_BI1\bifoundation\server\bin folder.
  
  Is this the question?. If so how can I get the DLL to 11G.
  
  Anyone of you faced a similar problem?
  
  Any help would be highly appreciated
  
  Thank you
  Joe

  This is a change in behavior when we have 10g and 11g. In BI EE 10 g, there was no Oracle Client delivered with BI EE. Thus, BI EE will use your Oracle DB client host to connect to the database. Usually not a problem in this case. But in BI EE 11 g, the software itself contains a client of 11.2 DB. Thus, when you try to connect to the database using the repository or the BI server, it will try to find the tnsnames entry in the customer Oracle of BI EE 11 g instead of your database. There are 2 options to work around this problem

  1. copy your tnsnames.ora {Oracle_BI1} \network\admin directory & {oracle_common} \network\admin directory (only the first is necessary because it is the ORACLE_HOME)

  2. or instead of the source tnsnames.ora entry, use the full expanded tnsnames as shown below

  (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 172.16.66.173)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl)))

  Both of the above will work.

  Thank you
  Vincent

• Unable to connect to the database when installing BI EE 11 g

  I want to install Oracle BI Enterprise Edition 11g Windows XP service pack 3.
  I used successfully of the repository creation tool to create the schema DEV_BIPLATFORM.
  
  Then I ran the main installation of Oracle BI program.
  "To halfway through the stage of" details of the database "requires the connection string, the user name and the password.
  I enter in these exactly as they should be, but still get the error:
  INST-08029: unable to connect to the database with the given credentials.
  
  The details that I use are:
  connection string: ltest2:1521:dwRialto
  username: DEV_BIPLATFORM
  password: DEV_BIPLATFORM
  where ltest2 is a Linux SS5 host running Oracle 11.1.0.6 EE. The service name is dwRialto.
  
  Physical connectivity is definitely ok, as evidenced by the fact that I get error 'INST-08035' if I change the name of the service for something not valid. Also, I get a different error, 'INST-08031' if I change the user name or password to something invalid. I have also granted SYSDBA and DBA DEV_BIPLATFORM, but still does not work.
  
  In addition, to be sure, I installed and executed on the same Windows PC SQLDeveloper - and that works very well, using the same credentials.
  
  Why the 11g BI Setup does not accept these credentials? I can't further with the installation until it does.

  Hello
  We had the same problem an hour ago
  What we did was drop the user through the official way to the rcu, re-create the user but this time with a different password (in our case, so DEV_BIPLATFORM/oracle)
  and then we continued without problem :)

  Good luck

  Published by: jopgenoo on August 23, 2010 07:05

• VAIO Messenger-unable to connect to the database

  I had this problem for months. When I connect to the internet... about 10-15 minutes later... a box opens "Vaio Messenger unable to connect to the database." I'd like to just turn off Vaio Messenger. I looked up how to disable Messenger but he always States go to the settings dialog box. For the life of me I can't find a dialog box. How can I disable Messenger? How do I repair Messenger so it CAN connect to the database? Help!

  I had this problem for months. I can't change the dialog box. I can't uninstall vaio Messenger. I have so much pain to find this site, if you have a cure please write me [email protected]

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• connect to the database

  Hi all...

  I am trying to connect to a database (mdb) mircosoft using the example provided with LV 8.5. The problem is that the database must be opened before you run the example. Is there a method to open the database using the vi?

  ThanksNAdvance

  FredFred

  Solved my problem...

  1. Open the database connection by using the connection information path and came out a reference of connection (see image)
  2. Subsequently, used db functions to do what I want to do

• Problem connecting to the server, error connection server and printer offline. I have a HP photosmart printer and Windows 7?

  My printer is not printing. It say problem connecting to the server, connection error server and printer offline. I have a HP photosmart printer and windows 7.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima