Problem connecting to the database

Similar Questions

• problem connecting to the database using dbclient

  Can someone help to solve the following question
  
  The following error occurred when connecting to the database when connecting dbclient to the database on linux from windows
  . TNS dbclient names has been configured with the SID and IP address of the machine from database
  
  ERROR:
  ORA-12560: TNS:protocol adapter error

  Could you share your tnsnames.ora file

  And refer to this topic

  http://forums.Oracle.com/forums/thread.jspa?MessageID=9142058�

• Problems connecting to the database msaccess 32 bit on 64 bit 11G

  Here's the question:

  I have a database to 9i (32-bit windows) with a connection hsodbc to an old one to an Access database so once the schema can see and copy data from an access database has said, everything works fine.

  I'm about to move the 64 bit 11.2.0.3 on windows 2008 server 64-bit database, database is migrated and tested ok.

  The problem comes from the connection dg4odbc, I created the AS400 database connections and they are ok, but I set up an ODBC for the access database, using the 32-bit ODBC interface as MS recommends, but I always get this error message:

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  ORA-02063: preceding 2 lines of RADERDB

  According to MS technet, it is do not use the c:\Windows\SysWOW64\odbcad32.exe to set up the ODBC connection, but I used only executable, when I use the ordinary 64-bit ODBC admin I can't even see msaccess drivers first.

  The funny thing is, when I point the tnsnames.ora on the old server 9i entry, it uses the ODBC connection and then the dblink 11G and then works fine. However, it is a band-aid solution and I want to get everything works from the new production database server.

  Any suggestions?

  Thanks in advance...

  The message means you are using a 32-bit with a 64-bit program ODBC driver. It does not work. If you want to connect with the 64-bit DG4ODBC, you must use a 64-bit ODBC driver. A package is available on the Microsoft Technet site (AccessDatabaseEngine_x64 - http://www.microsoft.com/en-gb/download/details.aspx?id=13255 ) that ships the drivers ODBC 64-bit for their Excel/Access programs.

  Please note that product installation gateway 32-bit on Windows 64-bit is NOT supported.

  -Klaus

• problem connecting to the database (master repository)

  Hello

  I am a beginner ODI.

  J "tried to connect to oracle 11g pay do the test. But my connection is not always valid.

  Is there a driver to install for ODI 11.1.7 connection to in to the database?

  Hello

  1.) first create a schema of Master_repo and work_repo your oracle database (or you can create a single dev_odi_schema for the master repository and work)

  (2.) in ODI, create master repository using schema Master_repo

  File---> New---> master repository Wizard

  3.) of files in ODI---> New---> create a new ODI repository connection.

  4.) now connect with newly created connection of ODI

  5.) navigator in topology, there are referential tab where you can create the repository to work.

  6.) create connection to repository work. and you can work in it.

  ODI11g: Creating and connecting to ODI Master and repositories work

  Let us know

  Thank you

• Having problems with SQL Developer connection to the database on a LINUX machine

  Having problems with SQL Developer connection to the database on a LINUX machine
  Hello
  I am trying to connect my machine to windows 7 Home premium to an oracle database 11 g on RedHat 5 machine using SQL Developer. I got this error on SQL Developer
  Status: Failed - Test has failed: the network adapter could not establish the connection
  
  
  on Linux
  

  LSNRCTL> status
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                03-APR-2013 16:13:13
  Uptime                    7 days 22 hr. 16 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
  Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "orc11g" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11gXDB" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11g_XPT" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  The command completed successfully
  LSNRCTL>

  and TNSPING
  

  tnsping 172.x.x.x
  
  TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  
  Used EZCONNECT adapter to resolve the alias
  Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
  OK (0 msec)
  [oracle@ltebilling ~]$

  Tnsnames.ora on Linux,
  

  ORC11G =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orc11g)
  )
  )

  Listner on Linux,
  

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
  (PROGRAM = extproc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  )
  )

  hosts/ect/Linux,
  

  # Do not remove the following line, or various programs
  # that require network functionality will fail.
  127.0.0.1               localhost.localdomain localhost
  172.x.x.x             LTEBilling

  and there is no problem to ping linux from windows
  
  Published by: user11309581 on April 11, 2013 15:16

  user11309581 wrote:
  as I have already desciped earlier, I can't connect to the server throw Linux my Windows SQL Server, with error message below.
  tatus: failed - Test has failed: the network adapter could not establish the connection

  It's too generic to mean anything. The application is hidden the real error message. You got when you did the tnsping and obtained "TNS-12535: TNS:operation has expired. Now THAT's an error.

  This indicates a problem firewall and routing. You said earlier you could ping the server, but now we see tnsping fails. Two different protocols of usage, so that both the successful ping turns out a valid physical path, it guarantees not that all traffic will pass. What happens with

  c:\ telnet 172.x.x.x 1521
  

• VAIO Messenger-unable to connect to the database

  I had this problem for months. When I connect to the internet... about 10-15 minutes later... a box opens "Vaio Messenger unable to connect to the database." I'd like to just turn off Vaio Messenger. I looked up how to disable Messenger but he always States go to the settings dialog box. For the life of me I can't find a dialog box. How can I disable Messenger? How do I repair Messenger so it CAN connect to the database? Help!

  I had this problem for months. I can't change the dialog box. I can't uninstall vaio Messenger. I have so much pain to find this site, if you have a cure please write me [email protected]

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• connect to the database

  Hi all...

  I am trying to connect to a database (mdb) mircosoft using the example provided with LV 8.5. The problem is that the database must be opened before you run the example. Is there a method to open the database using the vi?

  ThanksNAdvance

  FredFred

  Solved my problem...

  1. Open the database connection by using the connection information path and came out a reference of connection (see image)
  2. Subsequently, used db functions to do what I want to do

• Problem connecting to the server, error connection server and printer offline. I have a HP photosmart printer and Windows 7?

  My printer is not printing. It say problem connecting to the server, connection error server and printer offline. I have a HP photosmart printer and windows 7.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima

• How to connect to the database without sqlclient soa

  Hi all

  I have a very simple question.

  I need to write a shell script to get some stats for bpel instances of database as part of the daily health check.

  The problem is in our area of unix server, any customer database is not installed.

  Sql client is present as part of the installation of SOA that we can use to create the connection to the database? or by any mode of access to the shell database.

  Thanks in advance,

  Bob

  Hi Bob, there.

  most of the components in the FMW stack including SOA infrastructure rely on pure JDBC to talk to RDBMS and as I know there is no client Oracle installed in slot the FMW home (after installing SOA Suite).

  One possibility would be to use the Oracle Instant Client and use its tools from your shell scripts. It's a bit unzip and run Setup.

  HTH,

  A.

• Impdp not connect to the database without error returns

  Kind regards.

  Please ask your usual support, motivated, that I am facing a strange problem.

  I recently did an expdp of different actions, the database on which the export is carried out version 10.2.0.4 Now, I'm doing impdp on a database whose version is 10.2.0.5.

  The Datapump not return any errors, does not seem to connect to the database, the impdp log shows:

  ;;;

  Import: Version 10.2.0.5.0 - 64 bit Production on Friday, August 7, 2015 11:13:43

  Copyright (c) 2003, 2007, Oracle.  All rights reserved.

  ;;;

  Connected to: Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production

  With the partitioning, Data Mining and Real Application Testing options

  I wonder if this is a bug or compatibility of version of the problem.

  Thanks in advance.

  Best regards.

  The first thing I see is that you specify on the impdp command expdp.par.  This can work, but don't forget, there are expdp parameters that do not work in impdp. This should give an error, but not knowing what is in the file, it is difficult to see what might happen.

  You can add trace = ff0b00 and then watch to see is it y * dw*.trc files were created.  If not, then it is failing in the treatment of your settings and you want to in the last * dm*.trc file can help out you.

  Dean

• Unable to connect to the database GGSCI

  Hi experts,

  Currently, I am trying to configure an installation of goldengate and have a problem with the connection to the database through GGSCI.

  In SQLPLUS and sql developer, I can connect to the database, but thanks to GGSCI is impossible to connect to the database.

  I am trying to connect this name ggate@service, I get an error ORA-12504. I am unable to connect using this method.

  ggate@ggsrc password username dblogin *.
  ERROR: Could not connect to the database using the user ggate@ggsrc. Please check privileges.
  ORA-12504: TNS:listener did not have the SERVICE_NAME in CONNECT_DATA.

  granted DBA privilege user GGATE but still cannot connect to the database, can any one help on this subject, it is very useful.

  Thanks in advance.

  AT

  Hi thanks,

  After the set up TNS_ADMIN environment its works very well

  Thank you

• Inability to connect to the database

  OS: 8.1 Pro 32-bit Windows

  Java: 7u45 (build 1.7.0_45 - b18)
  

  
  

  Install Oracle 11g.

  When you open localhost:1158 / em - the message:

  "The database is down. Please specify the credentials of the host to access the restart and database diagnostic tools. »

  After entering the command:

  emctl status dbconsole

  It is reported that Oracle Enterprise Manager 11 g is running.

  When you type:

  emctl status agent

  indicates that the agent works.

  
  

  
  

  All Oracle, except OracleJobScheduler, running services.

  
  

  SYSMAN, DBSNMP, SYSTEM and SYS are not blocked

  
  

  File Emoms.trc when connecting to the database:

  http://rghost.NET/50166676

  
  

  Folder with alter.log:

  http://rghost.net/50165784

  
  

  
  

  In listener.ora replaced

  
  

  SID_LIST_LISTENER =

  () = SID_LIST

  () SID_DESC =

  () SID_NAME = CLRExtProc( )

  () ORACLE_HOME = C:\app\TorchTT\product\11 2. . 0\dbhome_1( )

  () PROGRAM = extproc( )

  () ENVS = "EXTPROC_DLLS =ONLY:. C:\app\TorchTT\product\11. ("2. 0\dbhome_1\bin\oraclr11. dll" ()

  )

  )

  
  

  on

  SID_LIST_LISTENER =

  () = SID_LIST

  () SID_DESC =

  () SID_NAME = TorchTTDB( )

  () GLOBAL_DBNAME = TorchTTDB( )

  () ORACLE_HOME = C:\app\TorchTT\product\11 2. . 0\dbhome_1( )

  () PROGRAM = extproc( )

  () ENVS = "EXTPROC_DLLS =ONLY:. C:\app\TorchTT\product\11. ("2. 0\dbhome_1\bin\oraclr11. dll" ()

  )

  )

  
  

  did not help.

  
  

  
  

  Subsequently decided to not wait and reset the database.

  
  

  Immediately after the reinstallation of page https://localhost:1158 / em / successfully opened.

  
  

  Only when the request to add a table to the executed successfully, but Developer SQL database query in the list of tables is not displayed, update the list and restart the program did not help. However, when re - create the table with the same name appears on the error you have already created a table with a given name.

  
  

  After restarting the computer database is available again.

  Can you please how to fix?

  
  Translated by Google Translate.

  If I'm right, the problem is resolved.

  Each of the reinstall previous, of the database at the beginning of the message appeared on the system configuration is not in line with the minimum requirements. Earlier the same error is indicated as a result of the use of new versions of Java, as Oracle 11 g support officially more young and therefore do not attach importance to this post.

  In the end, I decided once more to reinstall the basis data, but in compatibility mode for Windows 7. So - when you run the error to install an incorrect configuration does not appear. And after that the installation of the base is available, restart the machine - the base is again available.