Problem connecting to the domain profile

Similar Questions

• Windows 7 firewall does not not the domain profile

  Network configuration is the following:

  Server 2008 Standard with a nnn.nnn.nnn.2 fixed IP address

  DHCP is not enabled or in-use (have no idea why)

  Workstation is Windows 7 Pro with fixed IP of nnn.nnn.nnn.15 and was formerly joined to the domain successfully.

  Gateway/router is at nnn.nnn.nnn.1

  I start the machine Win 7 and can successfully connect to the field (using credentials put in cache maybe?) and I can ping the server. However, the firewall on the workstation uses the profile of private networks, when it should use the domain profile. Run gpupdate/force and get error tried it impossible to contact the domain controller. I checked the local policy on the workstation settings, and they are all set to not configured, as they should be, I hope. How can I get this workstation firewall to use the domain profile?

  -Carl

  Thanks Rohit,

  Got if fixed. Seems that DHCP is configured with the DNS setting about to workstation to Server DNS on the Internet. After changing to point to the DNS server on the domain server, which sets that problems and a few questions more than I didn't got to yet. This problem is solved. Now switch to my problems of Hyper-V. (sigh)

  -Carl

• How to network Vista workaround (the domain profile) location

  If Windows Vista is joined to a domain, the network connected to the field of authentication is marked as 'the domain profile.

  Unfortunately, if there is another NIC (Interfaces virtual VMWare), Vista doesn't know where they are. Whatever you choose for these NICs is 'public' or 'private '.

  The result is that a defined group policy Firewall profile 'Domain' the problem is never used, until additional network cards have been completely disabled.

  Anyone know a workaround to classify the VMWare NICs as "field located?

  Concerning

  Severin

  Try searching for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\" network {4D36E972-E325-11CE-BFC1-08002BE10318} cards (e.g. VMnet1, VMnet 8, etc.), and by adding a REG_DWORD value called ' * NdisDeviceType ' set to 1. Then disable and re-enable the network cards. This will make disappear from "Network and sharing Center" Vista.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Connect to the domain in question

  A single computer to the company have question connect you on white screen
  When I fix this problem work, I can't log on to this computer to the domain.
  the message appears when I connect to the domain:
  "the trust relationship between this workstation and the primary domain failed."
  This who should I fix this? This job connect cofigure admin to the domain server or simply set up on this machine?
  Can I open a session as localadmin without problem.
  Kind regards

  Try this.

  http://support.Microsoft.com/kb/2771040/en-us

  Search engine is your friend.

• USB MTP driver fail when the computer is connected to the domain

  Hello

  Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer= http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http: //social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/

  Please note that the cause of the problem is already, I don't want no information on reg-patches and such.

  After connect us any computer to our area, the PnP for cameras (eg. iPhone) does not work.

  Tested on several models with the same result, always work before the computer is connected to the domain.

  I can't find any setting in our group strategy which must affect installation.

  You can find the log files from the same computer, created during the installation of the MTP (with an iPhone)

  https://anonfiles.com/file/9bf2a47c44cdb2f589d544924c6ffd2b

  MTP_domain.log has been created on a clean Windows 7 64 bits connected to our domain

  MTP_no.domain.log was created on a Windows 7 64-bit clean

  Hello
   
  Unfortunately, the question you posted would be better suited in the TechNet Forums. I would recommend posting your request again in the TechNet Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   

• Unable to connect to the domain of Tuxedo

  Hello

  I sent a cloned cartridge of peoplesoft with the list of domains. These areas have created the PS_AppServer Agents that don't collect data because of this message "unable to connect to the domain of smoking: ELMPRD5 ' with message id:"PS_ASRV_212 ".

  I checked the path of smoking and also set the symbolic link, but still its not to collect the data.

  Could someone help me on this issue as soon as POSSIBLE.

  Kind regards

  Shiva G

  The most likely cause of this problem is discussed in the 45907 Knowledge Base article, which relates to additional measures to be taken if the start agents PS_AppServer Manager Agent is running as non-root.

  Kind regards

  Brian Wheeldon

• After going instant return, get Windows cannot connect to the domain

  I created a team with a domain controller, a box of SQL and a front-end server. I also took a few shots on the front-end and sql. The problem is when I go back to a snapshot and if I logout or restart the server on the sql or the frondend, do not touch the domain controller, when I try to log into the server, I get the follow-up:

  "Unable to connect ot the domain, either because the domain controller is down or otherwise, unavalible, your computer account was not found... »

  I can unjoint and join the server and the problem by far, but there is another difficulty.

  Thank you.

  Vincent

  llvc wrote:

  I have sever the domain server and join and it works, but it is a pain that have to do whenever I come back to a snapshot. Is there a way I can update the new secure channel password?

  When you join a system to a domain, a computer account is created in the domain of the system.  Your server automatically changes the password for this account of computer at set intervals.  What happens is that after you've taken your snapshot your guest has changed his password for the machine account.  Then when go back you to your snapshot your guest tent to use the old password.

  To work around this problem, before you take the mark of the snapshot next registry change that turns off the changes of automatic password for the computer account on the domain:

  http://support.Microsoft.com/kb/154501

• Problem connecting to the server

  Whenever I open the pictures, I get an alert that reads: 'there was a problem connecting to the server "my-server", which is another Mac on my network.

  If I close the dialogue box, Photos keeps trying to connect and it appears again a few seconds later.

  Does anyone have an idea as Photos is all this and how I can stop doing?

  No idea - don't forget we can not see you if you have details

  We do not yet have an idea what software you use or you use 'MyServer' for

  What are the versions of the operating system and Photos do you use? What is your server? How are you connected to it?

  LN

• Problem connecting to the server after moving

  Hi, I keep getting the message "there is a problem connecting to the server"192.168.0.19"etc. This happened after I moved. New ISP, new router. I have an Airport Express and a NAS connected to it. Time Machine and Icloud on the NAS. I think that the NAS has this IP address before moving. There are now 192.168.10.176. Everything works, but I get the pop up frequently.

  I look at the accounts and start but nothing. I reboot safe mode does not remove the problem. So, what can I do?

  I'm on Yosemite with MBR.

  Can you connect using the new IP address?

• There was a problem connecting to the server 'SERVER NAME' error guard appearing

  There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network.  I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server.  This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them.  No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success.  I would appreciate all the advice really.

  I hope that gives you an idea of what I got!

• Check error: there was a problem connecting to the server Apple ID

  When I try to connect to my iTunes on my Windows laptop account it is said there is a problem connecting to the Apple ID server. This problem did not begin until 2 days. I have the latest version of iTunes and Windows.

  What is the number of the version of iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Leave a post by: turingtest2

  On the PC, when connecting each device, it loads a separate driver. You can try this trick when you want to get iTunes recognizes the iPhone 6. Thanks to the user of the CSA turingtest2 for the tip.

  Try the following:

  Open Control Panel > Device Manager

  Plug in your device

  Locate Bus USB Controllers > Apple Mobile Device USB Driver.
  It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.

  Right-click and select software update of the driver...

  Click Browse my computer for driver software

  Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers

  Click on let me pick from a list of drivers for devices on my computer

  Click on Apple Mobile Device USB Driver

  Click Next, then close and exit the Device Manager

  Leave a post by: ChrisJ4203

• There was a problem connecting to the network

  It identifies the network properly even when I put the password - and that is the password - the comment poster 'there was a problem connecting to the network.  The WiFi network, you are trying to reach cannot be found. "Yet he already told me that the network is correct.  Frustrated!

  Is the network that you connect to your personal or public?  On my home network, I turned on an access control and when you are trying to connect with an unauthorized device, we get similar behavior.  It does not connect despite all the correct information.

• I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player

  Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.

  HI Maria,

  If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations.  Once done, do the same for LNK entry.  This should restore your programs and get the Internet icon to go to the internet rather than WMP.  If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.

  If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.

  I hope this helps.

  Good luck!

• Error when connecting to the domain controller

  In the logon window, the error message is "cannot connect to the domain either because the domain controller is down or unavailable your computer account has not been found."

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Change the wallpaper of customer connecting to the domain

  I want to change each client wallpaper in my field a cooperate photo when they connect to the domain. Pls tell me how to do it in the domain controller.

  Hi cindy,.

  Your question is outside the scope of these consumer forums. It is better suited for the IT Pro TechNet public. Please ask your question in theForum on Technet group policy. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.