Problem creating a recovery on HP Ultrbook

Similar Questions

• Problem creating drive recovery for Satellite L550-10N

  Hello.

  I just bought a L550-10N and the first thing I tried to do is to create recovery discs using the Toshiba recovery disc creator.

  Everything went well on the first creation of disc (4 must be created).
  The problem starts with the second disk: about when it's half burned, decisions of the gauge, the DVD drive continues to function for hours and never stops.

  I tried the process again, but it was exactly the same.

  Anyone an idea how to solve this problem?

  Thank you!

  According to my experience, the best thing you can do is to create a recovery media using DVD-R virgins.
  I have created for several different models of laptops using TDK or Verbatim DVD-R media, and every time everything was fine.

• Satellite U500-17F - problem of calibration by trying to create the recovery disk

  I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
  The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

  Hello

  I had a problem with a different disc from different manufacturers.
  Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

  Test other brands!

• Satellite A300-15 has failed to create the recovery disk

  I'm trying to create the recovery for the first time disk (portable purchased before 5 days) and stop just before the end, the creator:

  Cannot read the file.
  F:\06343XSP5. STORMWATER MANAGEMENT
  (Error code: 020150-20-00000000)

  What's not?

  I posted this already in another thread, but I can repeat it;

  I noticed that not all DVDs are compatible and sometimes it of not possible to burn the recovery due to the problem of DVD DVDs.
  I put t know what DVD discs you use, but I had a good experience with TDK DVD-R.

  So my advice is simple; Try different DVD from different manufacturers

• Cannot create a recovery for my Satellite A300-1BZ CD

  I tried to use the Toshiba Recovery Disc Creator repeatedly and with many different brands of discs to create the recovery disk.
  However each time as the laptop is about to finish burning the disc, there is an error and the operation not can be completed.

  I don't think there is a problem with the drive as I have used for many other things including watching movies without problem.
  Could Toshiba please send me a recovery disk instead?
  Thank you

  > Could Toshiba please send me a recovery disk instead?
  A mail recovery disk? Very interesting. Mailed 4 GB image is not so easy.

  I don't know what you're doing, but if you want good tip then use Verbatim or TDK DVD-R blank media. For the DVD-R.
  I have too many Satellite A300 and recovery DVD, I created successfully.
  Do you use DVD-R virgins too?

• Problem creating recover DVD - Equium L350

  Please help, I just bought a L350 laptop and cannot create a recovery DVD.
  The writing of the DVD begins, and after 10-15 minutes the fails and I get the following message:

  The following question ccured while recoding data on the disk. A power calibration area error.
  Please, check if the disc is scratched or dirty, if so, please try again with a new disc. (error code: 0e01b5-26-00037304)

  Hello

  You get the power calibration error?
  Well, this error appears if the disk s lens may not calibrate properly in place.
  Above all, it occurs due to a mechanical problem s drive and in most cases, the CD/DVD drive must be replaced.

  On the other hand, the goal could not calibrate correctly using not compatible and not support CDs or DVDs.

  Have you tried burning different media from different manufacturers?
  If this is not the case, try this!

  Good luck

• USB keys - problem with the Recovery Manager

  I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

  Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

  Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

  Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

  The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

  I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

  I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives

• Cannot create a recovery on my Satellite C660D-1CU media

  Hello

  I have a big problem with my laptop, Satellite C660D-1CU.
  When I initially and then all the programs and Toshiba, and Toshiba recovery media creator this message is on display:

  It is impossible to create the recovery media.
  Can't find file recovery HARD drive on the second disc of the first hard drive. This computer has no valid environmental restoration of the hard drive.

  Can someone help me because I really need my pc back to factory settings because I have too many bugs.

  Concerning
  Nicolas

  Message was edited: assignment has been translated

  This problem occurs if the Toshiba Recovery creator tool cannot find the recovery image on the HARD drive. There are several reasons for this. Recovery image can be removed, deleted or structure of disk partitions HARD maybe changed. Just with the original settings and their State of origin HDD it will work.

  Unfortunately now you will be able to create a recovery media or the installation of HARD drive recovery.
  What you can do is a new and original for your model of laptop recovery DVDs and it is possible on https://backupmedia.toshiba.eu/landing.aspx

• Satellite L750 - 1 ML-creates false recovery DVDs?

  I posted it somewhere else, butI think that this category is more relevant.

  So, my recently bought L750 - 1 ML seems to have difficulties to produce a work recovery DVDs. Be a performance geek, just after I created the recovery DVD set (no problem was reported during the procedure) I tried to change the HARD disk of 640 GB for an 80 GB SSD. The recovery DVDs I have previously inserted in the DVD player started normally but after a while, he threw the following error:

  Copying F:\ZZImg\15157XSP2.swm to V:\HDDRecovery...
  There is not enough space on the disk.
  0 file (s) copied.
  ERROR: Failed to copy of splitpart or Canadian Red Cross!
  Press a key to continue...

  My first attempt to overcome the problem was to create another Recovery DVD #1, but after repeating the process with the new, I got the same error.

  So I have serious questions here: I paid for my Windows7 (included in the price of the laptop) and yet, it will last only to the point when my HARD drive fails?

  It would be nice to get answer on this.

  I searched the web for jurisprudence apparently and found these:
  http://www.axoloth.com/index.php/astuces/7-Toshiba-CRCS-error-lors-DUN-recovery
  http://www.forumschoixpc.com/viewtopic.php?topic=115983&Forum=6

  Thank you
  IVL

  The error that says: there is not enough space on the disk.

  Because you have turned on the 640 GB to 80 GB SSD HARD drive, I think that the question has something to do with the amount of available space on the SSD drive.

  It would be interesting to know if you can perform Toshiba Recovery with the previous test of 640 GB HARD drive that I think that the recovery procedure will end well.

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• Satellite U840T - cannot create USB recovery media

  Can someone advise please - I have a new U840T Satellite with SDDS and try to create a recovery media using a USB key.

  The Toshiba 'Recovery Media Creator' inviotes I plug a USB key at least 10.4 G. So, I inserted a new USB 16G. The app clearly did not see this, even if it is recognized by the PC itself, no problem.

  When I press 'create' to load the stick, the app just says: "the process of creation for all media was cancelled" is not only wrong spelling, but completely useless.

  I do something wrong, ir is just a very poor app?

  Thank you very much...

  Hello

  Format you the USB drive before you start the Toshiba recovery media creator tool?
  Please format the USB key, then run the Toshiba Recovery Media Creator.

  Here are some details how to use the TOSHIBA Recovery Media Creator
  http://APS2.toshiba-tro.de/KB0/HTD16036F0000R01.htm

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Failed to create the recovery on my Satellite A300-29N using Sony DVD disc

  Hello

  Tried to do the recovery disk for Toshiba A300-29N using Sony DVD new, always make a mistake. Toshiba service center confirmed that Sony DVD is not compatible with this DVD player.
  The one facing this problem and any updates. Tried with DVD Imation, it worked fine
  Concerning
  Samir

  I do not use a Sony DVD but TDK or Verbatim DVD-R support. Whenever I used it I was able to create a recovery media. No problem at all.
  I recommend you do the same thing. Believe me, it will not work correctly.

• Create a recovery partition. How? I lost my hard drive

  Hello.. I am a new user, so please be patient... The drive in my computer hp pavilion dv5-1199ew laptop has been damaged. How to create a recovery on the new disk partition? Maybe I have to buy a new operating system? greetings. Thank you!

  Hello

  Unless you created your set of recovery DVDs you will need to order a replacement set of recovery disks using the link below - the use of these will reinstall the operating system on your new hard drive, install all of the original software your laptop came with and will re-create the Partition D of recovery on the new drive...

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  

  Kind regards

  DP - K

• Missing file when creating a recovery disk CD

  Hello

  At first my English isn't the best.

  And now my problem:
  When I try to create a new HARD drive recovery CD an error telling me there is a missing file

  This is the error message:

  The following file could not be opened,
  F:\08011XSP5.swm
  (Error 020123-F1-00000000 code)

  I just translated the error message then maybe there are a few mistakes in there.
  I got a Satellite A300-1QD. Obtained on 20 March.

  I put t know what to do. Can someone help me?

  > I don't know what to do. Can someone help me?
  In my opinion, you should follow:
  Make screenshots of all the errors as evidence. Try to create a recovery media using DVD-R media and use high quality as TDK or Verbatim media.

  If the same thing happen again try to contact nearest authorized maintainer and explain the situation. I hope that you will get a new original Toshiba recovery media.
  The missing file is a serious problem for me and if you are unable to create recovery media, I fear that you can not install Vista using F6 option and the HDD recovery procedure. If this is true, you can stay without an operating system. Please don't make any experiences with F6.

  Contact ASP and try to get a free recovery media. Use screenshots as evidence.

  By the way: I Satellite A300, but I got lucky and creation of recovery worked correctly.