Problem creating type on a path

Similar Questions

• Problem creating type ready repair. (repair)

  Hello
  
  I'm trying to create logistics for type of repair ready here I get a message like "Element Instance is not registered to this charge.".
  
  Please guide me to solve this.
  If possible, please send the docs on Depot Repair Setups.
  
  
  Thanks in advance,
  
  Prasanna.A
  
  Published by: Prasanna January 28, 2009 02:41

  OK, when line you logistics OM to the interface, you must enter the details of base install (source select reference number or serial number) if the item you use is traceable installbase. This is based on the configuration of the service activity. If you don't want to go into the details of installation, you must change the configuration of the Service activity and UN check the required indicator of source reference. Open repair type setup form and see the service activity, you use for boat loan line article and then go to the Setup screen 'Installbase types of transaction' and request for this service activity and UN check the source of reference required information checkbox. You should not get this error if you do this.

• Type on a path which increases progressively from left to right size

  I need to create type on a path where the characters gradually increase in size from left to right. I know I can manually change the size of each character, but anyone know of an easier way to do it-possibly with a script?

  This previous discussion may be useful:

  http://forums.Adobe.com/message/1275493#1275493

  The link to the script mentioned in the thread above is broken, but it should work:

  http://forums.Adobe.com/message/1258988#1258988

• circle continues to change color when I use the type on the path tool

  I made two circles and I want to have written them, where is the black. but when I click and use the type on a path tool, it transforms the inner circle in black. I want the Red inner circle to stay, while the outer circle remains black. I had problems with this. I tried to adjust the background/outline, but nothing seems to work. Help, please.

  Here are two images - the first is what it looks like at first, while the second is what happens when I use the type on the paths tool:

  

  

  The use of this circle of text on a path makes a text path, which may not have a fill. Add a third circle and use it for the path of your text.

• is that what we put statement anchor inside a create type statement?

  Hi all
  is it possible to put an anchor statement inside the create type statement? Suppose I want to declare the following type at the level of the schema:

  SQL> create or replace type f_name_list_type is table of employees.first_name%ty
  pe;
    2  /
  
  Warning: Type created with compilation errors.
  
  SQL> SHO ERR
  Errors for TYPE F_NAME_LIST_TYPE:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  0/0      PL/SQL: Compilation unit analysis terminated
  1/35     PLS-00201: identifier 'EMPLOYEES.FIRST_NAME' must be declared
  SQL> desc employees
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
  
   EMPLOYEE_ID                                        NUMBER(6)
   FIRST_NAME                                         VARCHAR2(20)
   LAST_NAME                                 NOT NULL VARCHAR2(25)
   EMAIL                                     NOT NULL VARCHAR2(25)
   PHONE_NUMBER                                       VARCHAR2(20)
   HIRE_DATE                                 NOT NULL DATE
   JOB_ID                                    NOT NULL VARCHAR2(10)
   SALARY                                             NUMBER(8,2)
   COMMISSION_PCT                                     NUMBER(2,2)
   MANAGER_ID                                         NUMBER(6)
   DEPARTMENT_ID                                      NUMBER(4)

  What is the problem with the code above? The error complains employees.first_name does not exist, but, clearly, this is show in the figure.
  
  Kind regards
  TA.

  The anchor type declaration is a construction of PL/SQL, you cannot use it in a SQL type declaration. You must explicitly declare the data type llike:

  create or replace type f_name_list_type is table of varchar2(20);
  

  PL/SQL types are effectively recreated when the codd is called, Oracle can do research to see the data type at that time here. SQL objects are created once when you run the create statement, so there is no opportunitty to Oracle to search for the correct type when it is used.

  Also, think about what would happen if you used the SQL type as a column in another table. What should happen to the existing lines when someone changes name to a varcahr2 (30)?

  John

• Problem creating hierarchy based on 2 physical dimension tables

  I'm having a problem create 1 dimension logic with a hierarchy of exploration, based on two separate physical dimension tables. The errors I get when navigating in the exploring hierarchy is:
  "Cannot find coverage source logical table to the columns of the logical" &
  "Missing join between the logical tables.
  
  I use OBIEE 10.1.3.4
  Here are the details of what I have set up as:
  
  Physical layer:
  Table DIM_ORG with the dimension columns:
  -dimension_key
  -org_total_code
  -org_total_description
  -org_detail_code
  -org_detail_description
  
  Dimension table DIM_DEPT with columns:
  -dimension_key
  -dept_total_code
  -dept_total_description
  -dept_detail_code
  -dept_detail_description
  
  FACT_SALES table with columns of facts:
  -fk_org
  -fk_dept
  -sum_sales
  
  Physical joins:
  FACT_SALES.fk_org = DIM_ORG_dimension_key
  FACT_SALES.fl_dept = DIM_DEPT.dimension_key
  
  Business model and the mapping of layer:
  I created a logical dimension ORG_DEPT. It contains two sources of logic table (DIM_ORG & DIM_DEPT) and the following logical columns:
  -All departments (mapped to dept_total_code)
  -Organization (mapped to org_detail_description)
  -Organisation number (mapped to org_detail_code)
  -Department (mapped to dept_detail_description)
  -Department Code (mapped to dept_detail_code)
  The logical key of the company is based on the combination of number of organization & Department Code
  
  The hierarchy, I need is: all departments-> organization-> Department so I created the following hierarchy for ORG_DEPT:
  -Total level containing: all departments
  -Organization level containing: company (defined as logical level key) number & Organisation (als defined the key level drill)
  / Department detail level containing: Department (defined as logical level key) Code and the Department (defined as key level drill).
  
  In the LTS of the ORG_DEPT dimension, I've set levels of content for sources:
  DIM_ORG: Level of organization
  DIM_DEPT: Level of detail Department
  The LTS non - joins inner - came against the associated physical tables.
  
  I created a logical fact table (based on the physical fact table) SALES and joined him on the ORG_DEPT logical dimension table.
  In the LTS, level of content for ORG_DEPT is part of the level of retail service. Non - joins inner were aded against related physical tables.
  
  When I create a report in response to test the hierarchy and select only "all departments' I get the value of the returned correct size. When I try to break through to the next level, I get the following ODBC error:
  "Could not find coverage source logical table for logical columns: [all of them]." "Please check more detailed level keys are correctly mapped.
  
  When I create a report in responses and select "Every department" and "Sales", I get the correct result. When I try to break through to the next level, I get a different ODBC error:
  "Lack of join between the logical tables DIM_DEPT and DIM_DEPT: there must be at least a physical link to join between the underlying physical tables.
  
  All suggestions are welcome!
  
  Thank you!

  You have no relationship defined between the Department and org.

  You can either:
  a. create a table of physical dimension with a composite key of org_id & dept_id if there is a relationship defined somewhere, then to obiee model as you have already done, but in the physical layer on the composite key join
  b. model your exisitng as two-dimensional and two hierarchies tables and set up a path of forest favorite between them according to your needs.

  Kind regards

  Robert

• Type on a path error msg

  I am typing on a trajectory that began as a letter and I've now converted to outlines, and yet it tells me "you must click a non compound path, non-masquage to create text on a path" when I try.

  Why is this happening? What can I do to solve the problem? Thank you.

  Hello

  Try this:

  Make a copy of your letter-shape to the Clipboard (you need later)

  Ungroup (shift-cmd-G/shift-ctrl-G)

  Right click and select "release a compound path.

  Add your text in the path (which should disappear)

  Paste in front the original letter form

• CREATE TYPE subscription_type AS OBJECT - ERROR

  I'm not able to create objects of type also tried with different versions of oracle.
  I am currently using Oracle 11 g enterprise edition (2.9 GB).
  The problem is when I create an object TYPE and when I finish the command with a semicolon ';', oracle sql does not stop only (the query does not run) the loop goes on and on.
  I did like this and found that the SYNTAX is also perfect.
  
  SQL > CREATE TYPE subscription_type AS OBJECT
  2 (street varchar2 (30),)
  3 city varchar2 (30),
  4 PIN number code (10));
  5
  6
  7
  8...
  It turns on and it never ends. Command runs.
  Help, please!

  You must end with a slash: /

  create type address_type as object
         (street varchar2 (30), city varchar2 (30), pincode number (10));
  /
  

• 12.4.3.1 update volume problems created?

  12.4.3.1 update volume problems created?

  Hello

  I had no problem with the Volume in the latest version of iTunes. Can you give more details about the problem you are having?

  Jim

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.

• Problem creating the destination for Lightroom 6 folder

  Just upgraded to Lightroon 6. Now I have a problem creating the destination folder. Already checked the folder permissions. Even tried a new folder nothing helps. A lot of space on the computer.

  Don't know who to turn to next. Is this a problem of individual computer?

  You must use a computer with permissions of administrator account

  Also, do a right click on the installer and select RUN AS ADMINISTRATOR from the popup option window to see if that helps

• Reverse type on a path

  Often, I accidentally click on the edge of a text box with the type on a path tool. How can I reverse that and delete the lines of position and things that appear?

  with your selected area of text, go to Type > type on a path > delete Type from path

• create type

  Hi all
  for me, what follows is really strange:
  

  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> set serveroutput on;
  SQL>
  SQL> create type job_type is varray(3) of jobs.job_id%type;
    2  /
  
  Avvertimento: tipo creato con errori di compilazione.
  
  SQL> show err
  Errori in TYPE JOB_TYPE:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  0/0      PL/SQL: Compilation unit analysis terminated
  1/31     PLS-00201: identifier 'JOBS.JOB_ID' must be declared
  SQL>

  the string:
  Interim: tipo creato con if di registration.
  means
  WARNING: Tyube created with compilation error.
  
  I checked that the jobs table exists and this job_id also exist.
  Could help me, thank you very much
  Francesco

  You create type SQL, while % TYPE is PL/SQL attribute and cannot be used in SQL. You MUST explicitly specify the type of data and/length/precision/scale.

  SY.

• How to set type on a path looks like a circle?

  How to set type on a path looks like a circle?

  Hi Mike,.

  In Photoshop, select the Ellipse tool.

  

  With the Ellipse tool selected, look in the main menu and choose the path.

  

  Now draw the circle on your canvas. It should appear as a thin, gray line.

  

  Choose the text tool.

  

  Place the cursor on the edge of the circle you drew, and you should see the Type Exchange tool cursor. (It will have a little curved line added to it). Click on the edge of the circle path when you see the cursor change, and it will allow you to start typing on the circumference of the circle.

  

  See you soon!

  Michael