Problem display Dynadock V10 ethernet and mobile

Similar Questions

• Problems display high definition video and and GPS information to my new camera Panasonic DMC - ZS7 on Windows Photo Gallery

  I like to use the photo gallery Windows to display my photos because I use the tags to organize my photos. With my camera older Canon, photos, and videos have been without problem. I've upgraded to a new Panasonic with a GPS. On my camera screen, I see the count, information city and point of reference, but not when I watch it on WPG. Also there is no recognition of my videos HD avchd lite. If I switch to Windows 7 will be this corrected? or how to work around these issues?

  Thank you

  Hello
   
  As you are able to view the GPS informationin on camera.
   
  To view them, you must use PHOTOfunSTUDIO HD Edition Ver.5.1.
   
  The software mentioned above comes along to the camera.
  You need to install the software and check if you are able to watch the video.
   
  You can try with PHOTOfunSTUDIO HD Edition Ver.5.1 and work with this software for a few days, and later you can upgrade to Windows 7.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Problems with the new Toshiba Dynadock V10

  Hello

  First of all, sorry for my bad English :)

  I buy the toshiba dynadock v10 to connect all my external devices to my laptop DELL inspiron, via a single USB cable.

  All devices (mouse, keyboard, ethernet, external hard drive) work well, except the samsung TFT (connected via DVI - I to VGA), which after some time of work, to freeze and I have to use the laptop monitor instead.

  This TFT works OK when disconected from the dynadock, and I try all the USB ports on my laptop, but the problem continued.

  I ve instaled the new version 5.3 of the DisplayLink software, but the problem is still in force.

  I ve position in the DisplayLink Forum on this issue, with a debugging log file, and the answer was:
  + Thanks for the newspapers. They show: +.

  + 01:04:22.440 DeviceWindow:USB_0117_002780 DeviceRaw USB_0117_002780 WARN DeviceRaw.cpp:133 Connect USB_0117-002780 failed: failed USB transmission +.

  + Means that there is a problem of communication on the USB and software is loss of connection with the dock. My guess is that there is somewhere a hardware fault in the connection of the USB cradle to the computer. I'm sure that this is not a software problem. +

  You have reported similar problems? Is there something I m doing wrong?

  Thank´s

  Hello

  I'm not very well what's going wrong here, but this might not be a problem of dynadock m
  It seems that your Dynadock loses the connection with you laptop.
  Have you tested this Dynadock with other computers if it would happen too?

  However, on the European driver Toshiba page, you will find the latest software for Dynadock V10.

  You choose in the form download this:
  Options-> connectivity-> Docs & ports-> Dynadock V10 replicators

  Right now, I could find the v2.5.0.4 software

  Welcome them

• Tecra R840 - Ethernet and driver sound Dynadock question

  Hey,.

  Tecra R840, model PT429A-007004, does not work with the Toshiba dyna docking station.

  Specifically, the Ethernet and the audio driver for the dock dyna is not installed after running or installing the driver on the cd of the dock dyna or the latest driver on the site.

  Does anyone know a fix for this?

  Note: nothing in Device Manager to say that these pilots to dock a missing, only when you install the driver mentioned the wizard that Ethernet and audio drivers might not be installed.

  He also mentions that the dynadock has a problem with the graphics card edge, but we have not had problems with graphics, for example screens.

  > where to install the driver only mention Assistant that Ethernet and audio drivers might not be installed.

  _Regarding the driver LAN and Audio missing. _
  This theme has been discussed already in this thread
  http://forums.computers.Toshiba-euro...ThreadId=70771

  _The possible solution: _
  Navigate to the folder * C:\Program Files\DisplayLink Core Software *
  And here you should find the drivers for the network and its

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Ethernet and power to stop work on the Thunderbolt display

  I have my MBP connected to a thunderbolt, power of the connection screen and using the ethernet on love at first sight port to connect to my router.

  These two functions has stopped working. The USB ports still work and the works of the display, but stopped power and ethernet. Is there a way to re - configure or troubleshoot this?

  You can unplug the TBD from the wall, wait 3 minutes and reconnect.  Who can help.

• Display driver stopped responding and has recovered the problem

  I got a Dell Inspiron M5040 with Windows 7 for Christmas 2011 and I started to use Windows Live Movie Maker, but whenever I get in the middle of editing a video, the screen went black for about a second and says "display driver stopped responding and recovered." The first time this error message has occurred, the laptop computer itself restarted and is went to a blue screen with the text, telling me to go into some sort of 'safe mode' (I couldn't read the text in time). I have all the latest drivers, my laptop is new, only yesterday lit.

  What can I do about it? I really want to use Movie Maker. I'm new to the Forum, so I hope someone help me. Thank you very much. Any help is appreciated.

  Hi James

  What you see is called the action process.in TDR (Timeout, recovery of the display).

  In earlier versions of windows when the display device ran out of resources throughout the system would stop responding which would require a reboot to recover.

  In Windows 7, if the display device is not responding, the system will try to stop and restart the device to recover.

  More information on this feature can be found here (Advanced): http://msdn.microsoft.com/en-us/windows/hardware/gg487368.aspx

  The most common reason for this problem is that the display device is overloaded or used beyond its capabilities.

  This happens more often when reading graphic intensive games, but can occur with any process that uses a large amount of graphic resources, such as you see when you edit or create videos.

  What you can do to avoid these problems:

  1. only this type of procedure when the laptop is connected to a source ca.

  2. in prior to starting video editing, restart the computer.

  3. close all other running programs to ensure that all graphics resources are available for video editing.

  Windows Live Movie Maker Help Center - what is the system requirements? :
  http://explore.live.com/Windows-Live-Movie-Maker-system-requirements-UI

  Concerning

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• Get driver Ethernet and Bluetooth problems

  Hello

  Trust you are fine and doing great. I installed Windows8.1 64-bit. I am logged in as administrator with all installation rights.

  I get two error types

  (1) access denied

  (2) when I run pilot as an administrator it gives error "device not start correctly.

  Here's my hardware IDz

  PCI\VEN_10EC & DEV_8168 & SUBSYS_167C103C & REV_06
  PCI\VEN_10EC & DEV_8168 & SUBSYS_167C103C
  PCI\VEN_10EC & DEV_8168 & CC_020000
  PCI\VEN_10EC & DEV_8168 & CC_0200

  You are the very welcome.

  I need to know what model of laptop you have.

  On professional laptops, there is a parameter called LAN/WLAN switching of the BIOS.

  The default setting is enabled.  When the setting is enabled and you have an ethernet cable connected to the laptop, the WIRELESS network is automatically disabled and visa versa.

  So, if you want to have the ethernet and wireless active at any time you change the LAN/WLAN setting in the BIOS to disabled.

  I don't know if HP consumer notebooks also have this feature or not.

  I can only suggest that you check the BIOS of your laptop computer settings to see if this option exists.

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• a problem with the display of window margins and columns

  Hey there,

  I have a problem with my window margins and columns. Whenever I open it, it stuck in the upper right of my screen and I can't press OK.

  I tried to switch between workspaces, notice to update my program, restart the program, restart my computer, unplugged my second screen, rest again... nothing helps. Does anyone have an idea? It drives me crazy.

  

  Reset preferences also probably won't help, but worth to try: replace your preferences

  I'm a Windows user, but is there any command on Mac that allows you to move dialog boxes by using the arrow keys on the keyboard, as Windows users do?

• Can I make my Tablet and Mobile view of landscape to display my Desktop site?

  but keep the Tablet and mobile portrait discovers that tablet and mobile sites.

  Sorry, it is not possible at this time to Muse.

• Portege M700 - problem with Dynadock

  I can not change the resolution on a screen connected Dynadock and cannot save the display settings of all - how to fix this?

  I have a Portege M700 running Vista Professional SP1 - mainly the machine is used as a desktop replacement, connected to a screen Viewsonic 19 "wide through the Dynadock DVI - when it is connected so I have the laptop screen is off and use only the Viewsonic at a resolution of 1440 x 900. I had been bothered by the fact that whenever the resumption of the screensaver, the resolution would drop down to some lower State (I was not able to identify the dimensions he thought he was using but probably 1280 x 800, the default resolution of the internal display).

  I tried to solve this problem with the technical support level 3 without success. I thought I was smart and try to install the Intel Graphics Media Accelerator Driver update that is located on the Intel Web site (if you're just trying to install this software, Vista won't let you, but if you unzip it and manually update the drivers it works). This resulted in the connected screen Dynadock is off completely - no signal! So I uninstalled the drivers, reinstalled the drivers Intel original, but now, I have no the ability to adjust the resolution on the Dynadock login screen - and it is defaulting to something that's not going to (too broad and not high enough)!

  I lived several cycles to uninstall and reinstall the drivers for the graphics card (Mobile Intel 965 chipset) and the Dynadock; I updated the drivers Dynadock with the latest download from the website of DisplayLink, tried all sorts of drivers for the monitors associated with DisplayLink, tried several restorations system (which have all failed, which was also quite disturbing but less than an immediate concern), etc. Through all this, there is absolutely no way to choose the correct resolution of the screen through the display properties (my choices are 800 x 600, 1024 x 768 and 1280 x 800), and even simply activate an additional screen translates to nothing happens - the new settings do not stay after hitting "Accept" or "OK". I thought that I had licked when I realized that I had to uncheck "Extend to this monitor box office" to screen internal laptop - indeed I was then able to choose 1440 x 900 for the Viewsonic and everything was good, but everything came back after reboot. Of course, now when I try to repeat, I am unable to uncheck this box not more for the internal screen (well, actually, I can uncheck, but when I hit "apply" or "OK" it simply gets selected again).

  All this comes after I spent weeks trying to get this machine to work with the port replicator, which also did not work - a problem that appears to be from an incompatibility with Vista display card drivers and the port replicator (would have been nice if it sales had told me that when I bought the thing, but I digress...)

  In any case, it seems, as it is a Vista problem, I've seen this question asked of other portable devices vista and displaylink other advice, but I know it's possible to have a working reasonably OK solution since I've had one before I went and it messed up trying to work perfectly. Serves me right for spend 3 k $ on a machine and expected that it works as described, I guess. If anyone has any ideas... my next step is probably a downgrade to XP Pro, and then if that does not work, I'm tempted to break into pieces. Or, if someone's figured out how to get the port replicator to work with a M700 Vista, which is actually a better option for me...

  -Tony

  Hello Tony

  It's a very long story, but I use Portege M700 with Dynadock DVI (PA3542Y1PRP) and have no problem at all. After reading your ad I tried changing all the display options and I didn t notice something strange. It works well.

  Read your ad I see you tried to install different things and I wonder not to have so many problems. The best solution for you is to install the new OS using recovery image. Do the clean install of OS and install later Dynadock Utility 2.3 c. be careful while installation is running and do not interrupt the procedure of facilities. Make sure that all software components are installed correctly.

  When you start installation Dynadock Utility Dynacock can not be connected. When you see the window where you will be asked to connect Audio device USB connect the Dynadock to the USB port of your favorite. I use the USB port on the back.

  I use the external display to monitor LCD 22 with a resolution of 1680 x 1050. In the settings screen is display number three and when I click on it I can set the resolution to the maximum level (native resolution). The image is perfect.

  I tried the same as you:
  -Set the external display as primary monitor (for computer laptop LCD was OFF)
  -J' have enabled screen saver and tested several times, but the resolution is always the same no changes at all the
  -With these settings, I rebooted the phone several times as well as the resolution was still the same no problem at all

  After reboot, I can see the image on the notebook LCD only, to the point where I have to write the password that I can see the same image on laptop LCD and external monitor. A few seconds later, the image is switched on external monitor only and it is the same thing you want to have. The resolution is the same again (native resolution). No change at all and all seems OK.

  At the end I've switched back to the LCD display only. It is also interesting to procedure. As a first step, you click on display number one and activate extended desktop. After that, you will be able to use the option to change the primary monitor. A little strange to me, but OK.

  So everything works well for me and for you I only see an option. Reinstall Vista, install new utility Dynadock (new installations) and test again.
  One last thing: do not connect Dynadock on different USB ports. Use always the same.

  Bye and good luck!

• JavaScript does not in FF, but works fine in IE, Chrome, Opera, and Mobile devices

  On this page, the menus javascript (two of them) often do not load. If I click on Ctrl + F5, they can load on the 2nd attempt. This Page works fine in IE, Chrome, Opera and mobile browsers, but not in FF. I cleared FF cache by going to options and have also worked with modules and plug-ins to 'ask to activate '. This problem persists...

  Javascript menu bars sometimes don't show at all, or sometimes will appear, but have empty menu items (menu options do not show).

  http://www.consultapedia.com/international/international_marketing/intl_mrktg_skill101.htm

  I've included a screenshot of how they (don't) appear in FF. Also another screenshot of how they appear in other browsers, or when I click Ctrl + F5 in FF.

  Hmm, there is a lot of content added by scripts on this page after a delay.

  Firefox has several optimizations to speed up the display of pages in the cache which may malfunction under certain circumstances. For example, display a page using the Back button will not necessarily trigger an "onload" event in the page. This article describes how to work around this problem for web developers: https://developer.mozilla.org/Firefox/Releases/1.5/Using_Firefox_1.5_caching

  For end users, it is a difficult problem to solve. A partial solution might be the following:

  (1) in a new tab, type or paste Subject: config in the address bar and press return / enter. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste sess and make a pause so that the list is filtered

  (3) double-click the preference browser.sessionhistory.max_total_viewers and change the value from-1 to 0 (that's a zero).

  (Please change not all other parameters similar to 0-sounding or you can disable the ability of Firefox to save/restore your tabs and windows open).

  Then reload the page problem and trying sail away and back to see if the inserted content is preserved.

  There may be a performance penalty slight for this change, but you probably won't notice it. Firefox will be used in the file cache, it will just go up the page in a slightly different way that often works around this issue.

  Does make a difference to you on this site?

• "Display driver stopped responding and recovered."

  It happens every time I try to play a video on YouTube. The audio, but the video does not appear. My laptop slow for a few seconds then screen goes black then back to normal and the notification "display driver stopped responding and has recovered" is displayed. Even after that, there is no game even if the sound is not still a Visual.

  This only happens in Firefox. Videos YouTube work perfectly well on Google Chrome.

  Hello want, please see if the problem is always present when you update the driver for your graphics hardware for the new version: http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages