Problem error failed to set KB2345886. It's a real headache! help, advice appreciated.

Similar Questions

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• When I try to install the 'install Creative Cloud' I get this message "we encountered the following problems: Setup failed in a critical file.» Please try to reinstall. (Error code: 43)

  When I try to install the 'install Creative Cloud' I get this message "we encountered the following problems: Setup failed in a critical file.» Please try to reinstall. (Error code: 43). I tried so many times and repeat me the same mistake. Help, please!

  Please check the resolution:

  • Setup could not copy a critical file. Error code: 43
  • Error code install CC 43

  Concerning

  Stéphane

• When I open a program I get the error message "failed to set data for D3.

  When I opened this program, the first thing that happens is a message that says: failed to set data for 'D3 '.

  I click OK and the program opens and works BUT what does this mean message and how can I get rid of him?

  Thank you

  Finally resolved to get rid of my shopping list and bought a much better program called SPEEDY SHOPPER.  After a few minor bumps, he works and the creator is very good about helping so that I will meet a prob.

  Thank you all

• Install HA agent on ESXi 3.5u3 failed: ' year error occurred when setting up the HA agent on the host ".

  Hello!

  I of the improperly installed HA agent via vCenter to clean newly installed ESXi 3.5u3. It occurs in about 60% of the process 'Reconfigure for VMware HA': ' year error occurred when setting up the HA agent on the host ". Remote syslogI now have:

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.412 "TaskManager" 49156 info created task: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  Jan 14 14:19:56 80.251.112.51 spend: 2009-01-14 11:18:44.412 "NetworkProvider" 49156 info update the configuration of the entire network...

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "NetworkProvider" 49156 information updated configuration of the entire network.

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "TaskManager" 49156 info task completed: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  and no warnings or errors.

  In the list of features HA doesn't speak on the use of HA between the hosts, its all about the components within a single host HA capabilities.  You can cluster VMs on different hosts to VM HA, but not VMware ESXi HA

• Error code: 0x8024200D and KB2345886 will not install.

  Original title: KB2345886 will not install little matter what I do.  Can you tell me how to install?

  I tried almost every suggestion Fix - it that was given to me, and yet there is not way to this KB to install.  I have also received an error 0x8024200D #, but does not answer to what or how to get this error # fixed or any response to what it means.  I worked really hard for the last 4 days and get this a particular KB which will not be installed.  All the other six different KB installation failed, I was able to find solutions, but not this one and not this error # no more.  I could really use someone's help on this.  Thank you.

  Hi Rocky,

  Have what measures you tried to solve the problem?

  Method 1:

  You can read the following article to reset the Windows Update components and see if it helps.

  How to reset the Windows Update components?

  Method 2:

  You can perform the clean boot & try to download & install the update from this link.
  Update for Windows Vista (KB2345886)

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• Error occurred when setting up HA

  Hello

  IM problems to configure HA, the error is "year error occurred when setting up the HA Agent on the host."  I understand that this could be a DNS issue, I checked the/etc/hosts and everything seems fine.  Please see below:

  Do not remove the next line, or various programs

  1. who require network functionality will fail.

  127.0.0.1 localhost.localdomain localhost

  192.168.7.92 esx2.hazeware.net esx2

  192.168.7.91 esx1.hazeware.net esx1

  192.168.7.11 vc.hazeware.net vc

  I also checked the /etc/resolv.conf and who also seems very well.  Please see below:

  Search hazeware.net

  nameserver 192.168.7.10

  The two hosts and the VM (Virtual Center) can ping each other, Vmotion works very well, the DRS configuration is fine.  I have check the DNS Setup all that I can, I don't know what else to do, am I missing something?

  Also try stopping and restarting the virtual Center on your VC Server service... Working from time to time. Today, actually.

• I get a 'Secure connection' error failed with google stating "certificate contains the same serial number.

  When I click on a link to a google search, I get the "Secure connection" error failed in Firefox. He says, "please contact the administrator of the server or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority."

  I followed the instructions here:
  https://support.Mozilla.org/en-us/KB/certificate%20contains%20The%20Same%20serial%20number%20As%20another%20certificate
  and looked at this article:
  https://support.Mozilla.org/en-us/questions/1028103?ESAB=a & As = AAQ

  I uninstalled and reinstalled Firefox, deleted the entire folder profiles and reset Firefox. I see that the older (orphans) article points to my router. However, I have a new router and have updated their software. There is no button to add an exception (as stated in the article), so I can't just work around it. This problem does not occur with IE, so I have a hard time to believe that it is my router.

  How to solve this problem? I really want to change browser.

  Finally, I tracked the issue. The answer was found here:
  https://support.Mozilla.org/en-us/questions/1028985

  It turns out that Avast has a web shield that passes through its own verification of certificate https. Of course, this feature is not quite right and loses track of the certificates. Disable "https scanning" in the settings of Avast resolved the problem.

• Cannot download Fallensword Helper Scripts. Get ' Script cannot be installed error: failed @require json2.js.

  Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install the scripts said "Script cannot be installed error: failed @require json2.js. I did it for my computer every year since I started to use computers. I've never had this before. Please help me to get a fix for this, because I google it and cannot find an answer.

  I am the original author of FallenSwordHelper. It was due to some changes in GreaseMonkey 0.9.0, which made it impossible to have local scripts.

  I did an update (temporary?) so that extra all scripts (such as json2.js) now use absolute URLS.

  See also the official website of FSH

• ink cartridge error (failed electric pen)

  Deskjet D4360 printer; 32-bit Windows/vista; request entry/solution for/on "ink cartridge error (failed electric pen)."  new placement of ink cartridge were found. due research: have cleaned the contacts of cartridges (w / fluffy lin distilled water & reinstall cartridge. problem persists)

  What cartridge has been replaced? Make sure the printer is connected directly to the wall jack to make sure that the printer gets enough energy to function properly. Remove the cartridge and inspect the chute. Do you see differences between the two falls as a missing metal PIN or debris in one that is not in the chute on the other? Given that you have cleaned and inspected the cartridges already, I would then try reset the printer the following. No user settings are lost with this reset and they're trying to put the printer back into a known working state and clear the error message.
  
  To do this reset:
  1. take the cartridges from the printer and close the access door.
  2. If the printer is turned on, unplug the power cord at the back of the printer. Then disconnect the power cord from the wall outlet
  3. wait at least 30 seconds
  4. connect the power cord to the wall outlet, and then again in the printer
  5 wait for the machine to start. Once he recognizes that the cartridges are missing, place them in a moment.
  
  I hope this helps.

• "Reference to the error object not set to an instance of an object."

  Why after an automatic update of windows 7, I get this error "error object not set to an instance of an object reference"?

  Hi AHurst,

  1. When you receive the error message?

  2. the updates have been installed on the computer?

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the problem does not still in safe mode, and then perform the clean boot procedure to verify if a third party installed on the computer program is causing the error message.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.

  How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.   I have widows xp pro

  Hi Plumbbgp,

  1. what brand & model of the scanner?

  2. the scanner was working fine before?

  3. don't you make changes on your computer before this problem?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.