Problem/error resolution of Windows 7 after restart

Similar Questions

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Can't install windows update after restarting windows is to seek compensation

  Original tile: Cant install updates.

  Every time I have download updates & try to install when the computer restarts, there is a serious question & it asks me to insert the OS disc & fix my computer.

  How do we install updates without the problem mentioned above

  Hi HarshMehta,

  (1) how long have you been faced with this problem?

  (2) what is the complete error message you receive?

  (3) is Windows Update successful even after invites him to repair the operating system?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  You can see the steps mentioned in the link below

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• 0xC8000247 error, cannot install Windows Update after change of hard disk.

  Error code original title: 0xC8000247

  I just replaced the hard drive in two laptops.  Set to launch on the third.  After replacing the hard drive by using EZ gig cloning software iv install the new drive hitachi that I tried to run windows update and received this error message.

  Hello

  Method 1:

  I suggest you to perform a System File Checker scan.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Note: you may be prompted to insert the Windows Vista installation DVD, if all files are proven to be absent or corrupt.

  Try to install the update once the scan is complete.

  Method 2:

  I also suggest you to follow the steps mentioned in the link and check.

  Follow the steps listed in the article mentioned and check.

  Important:

  How to back up and restore the registry in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  If the steps do not contribute not to proceed to method 3:

  Method 3:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

  Try to install the updates once the installation is complete.

  Hope this helps and keep us posted.

• Problems of SBS 2011 Windows Update after you uninstall WSUS

  I have a Server SBS 2011 I uninstalled WSUS on.  Due to the usual problem of disk space on the server.  I uninstalled WSUS because I don't mind the jobs goes directly to Microsoft Update on the Internet.  But after uninstalling WSUS on the server, workstations stop download of updates completely.  It indicates that Windows updates are controlled by the administrator.  I can check the updates manually by selecting "Check for updates on the Internet".  How can I get the workstations to download updates normally by using the web site of Microsoft Updates?  Thank you!

  Hello

  I suggest you re-post your query on the TechNet forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Problems of resolution with windows 7

  Hey MS etc... I have a problem. I had my value native 1680.1050 resolution on my vx2235wm viewsonic for about a year. I run a geforce 8800GT 512 MB and I have never had a problem with it in the past.

  A few days ago when I tried to start windows, it would show the bios screen. loading screen of Windows, but as soon as he got to the Welcome screen my monitor showing no signal.

  I reinstalled all the drivers via the safe mode and still not received the same problem. I can run 1280 x 1024 resolution very well, but as soon as I change to 1680 x 1050 it displays no. signal. I posted on the forums of 100 and can't seem to find the solution. I even reinstalled my windows 7 and still had the problem with the standard microsoft drivers. I tried the beta also nvidia.com drivers who have been unsuccessfully.

  I'm literally begging now. PLEASE HELP ME

  Hi dansexy1,

  I went through a lot of forums and third-party sites, and it seems that Windows 7 is not compatible with resolution 1680.1050.

  The manufacturer has not released drivers for windows 7 so wait a few days more until they release the respective driver for windows 7, or you can download driver which supports vista and install the driver in vista compatibility mode.

  Hope this helps you.

  You can download the driver from this link: http://www.viewsonic.com/support/downloads/drivers/?prod_name=VX2235wm 
    
  Kind regards

  Bharath
  Microsoft technical support

• cannot open a Windows logon after restart, request admin password I've ever had

  After defragmentation, updates, virus scans, I restarted my computer and now I can not get connected.  He is Administrator and password.  It has never been set to my knowledge and I don't know how to get connected.

  See if you can type your normal user account name to change the name of the administrator account.

  If this is not the case, the built-in account named administrator does not have a password.  Just press the enter key.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I create the partition, bootcamp and error when the window installation, after that back to el capitan os, but it can not find the bootcamp partition and can't erase the master disk to re install mac os

  Can't see the deleted on el capitan bootcamp partition and can recover hard disk space

  making and removing the bootcamp partition should be always and only with BootcampAssitant!

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha

• Firefox unresponsive after restarting my computer after having made changes in the settings of the history and cookies

  I have some changes to cookies and erased my story for today... and then restarted my computer... now that firefox does not open... will not respond... should I uninstall firefox and then reinstall?

  If I uninstall firefox will be reversed the changes I made with cookies and my story?

  If I was to uninstall and reinstall firefox will lose my bookmarks if I do this? or firefox remembers them... so when I reinstall the previous bookmark is too reinstalled?

  Is - this Firefox starts when you open first after the computer restarts, but crashes the next time that you try to start? If Yes, then there is a bug in Firefox 29 where Firefox crashes out when the parameter ' delete history closing Firefox "is selected, so that you get an error" running but not responding do not "next time you ttry to launch. In this case, end the firefox.exe process in Windows Task Manager (or restart the computer) and then reset your Firefox Privacy options and UNCHECK the option «Clear history of Firefox closing» See this article for more details:
  Privacy, historical settings of navigation and-no-track

  If this isn't the problem and Firefox still open even after restarting the computer, then try to boot mode safe of Firefox by holding down the SHIFT key when you start Firefox. If Firefox starts then read Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to narrow down the cause.

• APS after restarting Essbase

  Hove, I have a problem with the work in APS
  -After restarting Essbase - I need restart APS, because
  have error
  --------
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < SOAP - ENV:Envelope xmlns:SOAP - ENV = "http://schemas.xmlsoap.org/soap/envelope/" xmlns: xsi = "http://www.w3.org/1999/XMLSchema-instance" container = "http://www.w3.org/1999/XMLSchema" >
  < SOAP - ENV:Body >
  < SOAP - ENV:Fault >
  < Faultcode > XMLAnalysisError.1051007 < / faultcode >
  < faultstring > <! [CDATA [impossible to define active application/cube.]] [[Essbase Error (1051007): invalid login id - request failed [EssSetActive]]] > < / faultstring >
  < Faultactor > XML for Analysis Provider for Essbase < / faultactor >
  < detail >
  < error ErrorCode = "1051007."
  Description = "can't set active application/cube.» "Essbase Error (1051007): invalid login id - request [EssSetActive] failed.
  Source = "XML for Analysis Provider to Essbase.
  HelpFile =""
  / >
  < / details >
  < / SOAP - ENV:Fault >
  < / SOAP - ENV:Body >
  < / SOAP - ENV:Envelope >
  
  --------
  
  I think it's strange - APS becouse it is another application and did not have a hard link with essbase.

  Hello

  Run the below two statements Maxl on your Essbase server:

  change system session_idle_poll the value none;
  change system session_idle_limit the value none;

  It could be that useful...

  KosuruS

• After restarting windows and then no error in config/system is finally windows starts successfully with no problems quo. __

  "windows couldnot start because the following file is missing" c:/windows/system32/config/system.
  This message appears at the first start, but when I press ctrl + Alt + Delete, restart windows and then no error in config/system does finally come windows starts successfully without problem usually. I searched on the internet that all solutions are given if windows XP does not start. But in my case after restart only a single window loads successfully. I'm dubious before using the recovery console.
  Please help everyone,
  no case I found the solution to this particular problem.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else. If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  
  Never, never, never start with the support engineer technical 'expert' who are hired by Microsoft to implement the KB307545.  You are likely to be in for a frustrating waste of time and might just make things worse.

  Always, always, always start with a chkdsk with first error correction.

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Windows 8 stuck in reboot loop ' your pc encountered a problem and needs to restart. We collect only some error information, and then let's restart for you"

  My laptop was working fine last night, but I left it on and unplugged and he died. This morning, I'm an endless loop of ' your pc encountered a problem and needs to restart. We collect only some error information, and then let's restart for you"

  the message appears for a second and then the VAIO logo reappears before the pop blue screen for a second. This goes just forever with no additional info. I can see an additional line appear on the blue screen every time everything as it turns off so it is unreadable.
  Help please?
  more information: the percentage never bar going past 0% it pop right to the top and back immediately to the VAIO screen.

  Hi Wesley,

  This problem could be due to corruption of the system files, I suggest you try to perform auto repair using Windows 8 disc of Windows recovery environment (WinRE) and check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  a. Insert the media (USB or DVD) and restart your computer.

  b. press on the key F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.

  c. once the Windows Setup window appears, follow these steps:

  d. click Next and select repair your computer.

  e. you will see an option to choose and then a blue screen. Choose the troubleshooting option and select advanced options.

  f. you can choose automatic repair of the advanced boot option.

   

  Keep us updated on the status of the issue.

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• Ligtroom 6 best, I will describe my problem once the hour 1. After 4 weeks, I get the message "trial version Ligtroom 6 expired 2. You will be asked to fill out my license number 3. After completing the restart and get the message "error 16" 4. Never

  Ligtroom 6

  Better, I will describe my problem once right

  1. always after 4 weeks, I get the message "trial version expired Ligtroom 6a

  2. you will be asked to fill out my license number

  3. After completing the restart and get the message "error 16".

  4. all again manager install Adobe again and install this once again repeated problem Ligtroom each month can ensure that this stops my version is a purchased official version

  Now repeat the problem after only 4-5 days!

  Caveat! I'm not a computer specialist are not too complicated solution

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html