Problem event name: StartUp Repair V2

Please, please can someone be kind enough to help me to solve the problem of failure to start following with a vista running acer 5720 32 which took place after the installation of new updates. the machine does not start upnormally and there is no restore points available - even if a restore point created before the updates installed. Acer laptop - so no recovery disk or available installation floppies! managed to get in SafeMode (f8) run start up repair and last good known, but still no will start normally. continues to give this event log:

Signature of the problem

Problem event name: StartUp Repair V2

Signature of the problem 01: Auto failover

Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000

03:6 problem signature

Signature of the 04:262147 problem

Signature of the problem 05: no startup failure

Signature of the 06 problem: no Cause root

Signature of the problem 07:0

Signature problem 08:2

Signature of the problem 09: Wrp repair

Issue 10:2 signature

OS version: 6.0.6000.2.0.0.256.1

Local ID: 1033

Thank you very much guys for any suggestion - I need help please.

Hello

Is there an error message or error code then start you the computer normally?

Try the following and see if it helps.

Method 1:

Try to boot to the last good known Configuration.

Using the last good known Configuration:

http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

Note: Also make sure that you have disconnected all external devices except the keyboard and mouse.

Method 2:

Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem: http://support.microsoft.com/kb/934540

Tags: Windows

Similar Questions

  • Windows Vista is not the right start, error message "problem event name: Startup repairV2.

    I recently got a game on Steam (GTAIV), but after that the match was my computer download was in place. I would have allowed a program through, thinking it was steam or game. I had a problem since then, now it is stuck on the beginning of initialization, it says I have errors:

    Problem event name: Startup repairV2

    Signature of the problem 01: AutoFailure

    Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

    Prob Sig 03:6

    Prob GIS 04:786444

    Prob Sig 05: Corruptvolume

    Prob Sig 06: NoRootCause

    Prob GIS 07:0

    Prob GIS 08:2

    Prob Sig 09: WrpRepair

    Prob GIS 10:87

    OS version: 6.0.6001.2.1.0.256.1
    Local ID: D

    Same prob here is Looks like something is damaged

  • Problem event name: ServiceHang name of the Service: Image name MEANING: sens.dll Image Version: 6.0.6001.18000 Type of Service: 20 Startup Type: 2 OS Version: 6.0.6002.2.2.0.768.3 locale ID: 1033

    Hello

    I am writing to find out if I've broken hardware or software corruption...?
    In the end, after I transfer files via a cable, I'm blocking this computer to do a clean install of Windows 7.
    ___________________________________________
    Windows NT Version 6.0 Build: 6002 SP2
    Product (0x3): Vista (TM) Home Premium Windows
    Edition: HomePremium
    BuildString: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
    Flavor: Multiprocessor Free
    Architecture: X 86
    LCID: 1033mama
    ___________________________________________
    Description
    Service System Event Notification Service hung on starting.

    Signature of the problem
    Problem event name: ServiceHang
    Service name: SENSE
    Image name: sens.dll
    Image Version: 6.0.6001.18000
    Type of service: 20
    Startup type: 2
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Files helping to describe the problem
    Version.txt
    minidump.mdmp
    ___________________________________________

    Plain talk:
    The computer works well except there anyway any internet connection.
    As in not even one toe in the door more.

    Recovery is off, so no chance to try this.
    No virus is embedded.

    What I was doing?
    I was streaming a lot of Netflix for the last two weeks...

    I like to think that I run a pretty tight ship with this machine as in its 'own' (except recovery being off)...

    Toshiba Satellite A205 - S4607

    Device Manager shows everything is working normally. It would show if the equipment was broken?

    A month ago I noticed a bulge just above F7 to F11. The highest part being F9. It is just the plastic,
    but, obviously something had warm, yet, the machine worked very. When I discovered that it was the other
    morning after and streaming aircraft are asleep... computer had been just sitting there with remnants of
    'Dead' in the browser since ignored Netflix...

    So, back at the beginning of this email:
    "broken hardware or software corruption...?
    In the end, after I transfer files via a cable, I'm crashing this computer to do a clean install of Windows 7. »
    (or am I?)

    Thank you for any constructive comments,
    Tim

    Hi T9mothy,

    Method 1
    Device Manager would show if the driver for the hardware is corrupted or damaged which can be resolved by updating or reinstalling the driver. Try the steps from the following link to resolve the problem of the internet.

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2
    SFC scanner. SFC will correct if you have corrupted system files.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    If you have problems with the hardware, then you need to contact the manufacturer of the computer.

  • Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.2 locale ID: 1033

    I have a problem in my laptop,

    This is the detail of the problem.
    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.768.2
    Locale ID: 1033
    More information about the problem:
    BCCode: c000021a
    BCP1: FFFFF8A000099840
    BCP2: 0000000000000000
    BCP3: FFFFFFFFC0000001
    BCP4: 0000000000100620
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    Hello

    STOP: 0XC000021A

    Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
    (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

    Cause

    This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

    Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.


    Solve the problem

    Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

    Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

    If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

    Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

    Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

    STOP: 0XC000021A<-- read="" this="">
    * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

    -----------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
    above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
    repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
    discs of the machine system good cheap that you already own windows (you will need to reinstall
    If necessary). You can also repair disks on another computer.

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • problem signature: problem event name: bluescreen: stop 0xA

    Problem event name: bluescreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 2057
    Additional information on the problem:
    BCCode: a
    BCP1: 000000F0
    BCP2: 0000001 B
    BCP3: 00000001
    BCP4: 836E75AE
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Hello

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 methods (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------------

    BCCode: 0a 0x0000000A

    Check these KB

    Error message on a blue screen on a computer that is running Windows 7 or Windows Server
    2008 R2: "STOP: 0X0000000A"
    http://support.Microsoft.com/kb/979444

    Stop error message on a computer that is running Windows 7 or Windows Server 2008 R2 and
    who has the iSCSI storage: "0x0000000A"
    http://support.Microsoft.com/kb/979711

    Those and 5 other KB Articles are available
    http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000000A&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

    -----------------------------------

    BCCode: 0a 0x0000000A

    Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
    just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
    The video driver or something affecting it would be questionable.

    Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
    system manufacturer and device manufacturers sites.

    Below I'll post a generic bluescreen convenience store and in the next message how to upgrade
    drivers and BIOS as well as controls memory.

    -----------------------------------

    BCCode: 0a 0x0000000A

    Cause

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

    The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    Solve the problem

    If a kernel debugger is available, get a stack trace.

    To resolve an error caused by the faulty device driver or service system, BIOS

    1. Restart your computer.
    2. Press F8 to character-based menu that displays the choice of operating system.
    3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

    To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

    1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
    2. Try disabling the cache in memory of the BIOS.
    3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
    4. Make sure that the latest Service Pack is installed.
    5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
    6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

    If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

    Comments

    Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

    BCCode: 0a 0x0000000A<-- read="" this="">
    * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

    ==================================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen
    of death "crashes and displays the information about all crashes in one
    Table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista (also Windows 7) Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

  • Windows 7 problem Event Name: BlueScreen__ OS Version: 6.1.7600.2.0.0.768.11__

    I get this error when you use the internet, the blue screen and it restarts. I checked and recontroler drivers please help.

    Thank you

    > Signing of the problem:
    > Problem event name: BlueScreen
    > OS Version: 6.1.7600.2.0.0.768.11
    > Locale ID: 1033
    >
    > More information about the problem:
    > BCCode: 19
    > BCP1: 00000020
    > BCP2: FDE42558
    > BCP3: FDE42588
    > BCP4: 4A0600AB
    > OS Version: 6_1_7600
    > Service Pack: 0_0
    > Product: 768_1
    >
    > Files helping to describe the problem:
    > C:\Windows\Minidump\090610-26566-01.dmp
    > C:\Windows\Temp\WER-33384-0.sysdata.xml
    >
    > Read our online privacy statement:
    > http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    >
    > If the online privacy statement is not available, please read our privacy
    > Statement offline:
    > C:\windows\system32\en-US\erofflps.txt
    >

    The minidump files show constantly the csrss.exe process break with a BAD_POOL_HEADER stop error (19) referencing the win32k.sys.

    It's probably another pilot, a third-party driver that is causing the problem.

    I would say, at this stage, to enable verifier against any non-Microsoft drivers to stress test them and try to eliminate a problematic driver:

    Start > type check in the search programs and files, then press 'Enter' > create standard settings > next > select the names of the drivers in the list > select all non-Microsoft drivers > finish

    Restart the computer.

    Continue to use the computer normally but if you have any available BSOD brand minidump files.

    If after the activation of the Verifier and restart the computer, you receive a BSOD on startup and cannot start Windows, restart the computer in "safe" mode, and follow these steps:

    Start > type check in the search programs and files, then press 'Enter' > delete existing settings > finish

    Restart the computer, log in Normal Mode and make available any resulting minidump file

    I would also say, before you enable Driver Verifier, to download, install, update and run (quick scan should be sufficient) Malwarebytes' Anti-Malware (free version), in the case of McAfee missing something:

    http://www.Malwarebytes.org/MBAM.php

  • Problem event name: BlueScreen, System Version: 6.0.6002.2.2.0.768.3 locale ID: 1033, BCCode: f7, BCP1: 8039989, BCP2: 8EA75AEB...

    I use Windows Vista. Recently Im facing problem when PC startup. PC will not boot from iteration 4/5 of the time and the boots, then blue screen... once properly boots he invites ivem error.

    Someone knows this problem and the solution for it.

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: f7
    BCP1: 8039989A
    BCP2: 8EA75AEB
    BCP3: 7158A 514
    BCP4: 00000000
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini110211-01.dmp
    C:\Users\Manoj\AppData\Local\Temp\WER-79513-0.SysData.XML
    C:\Users\Manoj\AppData\Local\Temp\WERC0ED.tmp.version.txt

    Read our privacy statement:
      http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    0xF7 bug check code
    http://msdn.Microsoft.com/en-us/library/ff560389 (v = VS. 85) .aspx

    Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  • Problem event name: screen, blue ID:1033 locale

    Hi all

    I just got a problem in my system (Windows 7). When I looked on the net, suddenly the hanging system and automatically turns off. After 30 seconds, it is still once restarted. I have the login in safe mode and check the reason for the question. It displays an error message as below.

    When the system hanged I was using Google crome, then I tried Internet explorer, I suspect not all restart, but sometimes system changes and going to normal after 30-40 seconds. I use Kaspersky antivirus update.

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.1.7600.2.0.0.256.1

    Locale ID: 1033

    More information about the problem:

    BCCode: 116

    BCP1: FFFFFA80019574E0

    BCP2: FFFFF88004627CB0

    BCP3: 000000000000000

    BCP4: 000000000000002

    OS version: 6_1_7600

    Service Pack: 0_0

    Product: 256_1

    Files helping to describe the problem:

    C:\Windows\Minidump\081313-15475-01.dmp

    C:\Users\Name\AppData\Local\Temp\WER-51745-0.SysData.XML

    Can someone help me to identify and correct the error.

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
    The procedure:
    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy (compress)
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
    Link to find out how to download below.
    To ensure the minidumps are enabled:
    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
    Please also run MSinfo32 and download the output as well.
    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    System specs are extremely useful then please include everything you know.

    Blue screen view and that crashed are often wrong and should only be used in case of emergency...

    You can learn more about BSOD here
    You will learn how to test your memory here 

  • Repeat question - problem event name: Bluescreen

    My PC has been blocking maybe once a week. The PC had VISTA on it before and had no problem. I've recently switched to Windows 7. That's when the problem started. Windows is up to date will all updates. The right computer screen turns white and static blue which is distorted. The question that popped up last was:

    Signature of the problem:

     

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.256.48

    Locale ID: 1033

    More information about the problem

     

    BCCode: 19

    BCP1: 00000020

    BCP2: 8540 000

    BCP3: 8540 300

    BCP4: 08600000

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 256_1

    The computer is:

    Toshiba Satellite L305D-S5900

    AMD Athlon (TM) 64 X 2 Dual - Core TK-57 1.90 GHz processor

    3.00 GB RAM (2.87 GB usable)

    32-bit operating system

    Windows 7 Professional with Service Pack 1

    The events that occur when blockages of the system is:

    Error 16/04/2013 09:48:29 EventLog 6008 none

    Error 16/04/2013 09:48:32 BugCheck 1001 none

    Critical kernel 16/04/2013 09:48:15-41 (63) power

    Error 16/04/2013 core 09:48:17 - EventTracing 3 Session

    I tried to watch the mini dump but I don't know which application to open it in without being random characters.

    I ran a test of memory but don't know which.

    Any ideas how to fix and links to patches would be appreciated.

    Thank you.

    Hello

    Thanks for the detailed description of issue.

    I suggest to consult the following suggestions and check if it helps.

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    WARNING CHKDSK:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

     

    System Restore Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

     

    Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

    I hope this helps. If the problem persists, or if you have questions related to Windows please get back to us. We are happy to help you.

  • Well, it seems we could never be rid of errors, this time, the signature of the formidable problem: event name: BlueScreen

     

    Just replaced main hd, reloaded win7 and spent the last days of torque tuning system and now the 2nd today a system crash: blue screen.  thought with a new disk and memory, which was bad, new W7 and meticulously careful re - build I have no breaks down for awhile.  Any thoughts on this, and of course, all the solutions?

     

    Signature of the problem:

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.256.4

    Locale ID: 1033

    More information about the problem:

    BCCode: 19

    BCP1: 00000003

    BCP2: 8579FDE8

    BCP3: 8551FDE8

    BCP4: 8579FDE8

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 256_1

    Files helping to describe the problem:

    C:\Windows\Minidump\022313-22125-01.dmp

    C:\Users\INTL1\AppData\Local\Temp\WER-34265-0.SysData.XML

    Read our privacy statement online:

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:

    C:\Windows\system32\en-US\erofflps.txt

    Hi Al Adams,.

    Welcome to Microsoft Community where you can find the answers related to Windows.

    As a pet the description provided, looks like you are facing a hard time with the Windows 7 operating system.

    BCCode: 0 x 19 00000019: this could be drivers programs antivirus/antispyware/security and other materials are also likely causes. Update of the great drivers and BIOS would be the best plan of attack. If we must also try to uninstall your antivirus/security as a test.

    Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I suggest you to use Driver Verifier to identify issues with Windows drivers for advanced users:

    http://support.Microsoft.com/kb/244617

    Using Driver Verifier: http://msdn.microsoft.com/en-us/library/ff554113(v=VS.85).aspx

    See the steps in the following Microsoft article and check.

    Resolve stop (blue screen) error in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Notes:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

    Keep us informed on the status of the issue.

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • I need help for the problem event name: BlueScreen. Help, please...

    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.2
    Locale ID: 1033

    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA8007D53010
    BCP2: FFFFF88006CEAC48
    BCP3: 0000000000000000
    BCP4: 0000000000000002
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Hi Vikram,

     

    Thanks for posting the question in the Microsoft Community!

    You get the blue screen error in the computer.

    To work with the issue, I suggest you to visit:

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

    Note: When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

    Note: When you format a disk, all data will be lost.

     

    It would be useful for us to identify the problem, if you could upload the dump file.

    You can use the Sky-drive to download the dump file. Check the link for the steps on how to download Sky-Drive.

    http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65.

    The location of the dump file is C:\Windows\Minidump\.

  • Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033

    Signature of the problem:

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.768.3

    Locale ID: 1033

    More information about the problem:

    BCCode:                                               f4

    BCP1: 0000000000000003

    BCP2: FFFFFA8005726B30

    BCP3: FFFFFA8005726E10

    BCP4: FFFFF800031E0460

    OS version: 6_1_7601

    Service Pack: 1_0

    Product:                                               768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\111812-128154-01.dmp

    C:\Users\Roberto Martinez\AppData\Local\Temp\WER-181694-0.sysdata.xml

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

    The procedure:
    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy.
    * Join ZIP archive to your message by using the button (attachments) "trombone".
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

    To ensure the minidumps are enabled:
    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    Please also run MSinfo32 and download the output as well.
    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    (Instructions for XP, Vista, Win 7, Win 8)

  • Problem event name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 locale ID: 1033

    It happens almost every day and idk what to do, please help!

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    More information about the problem:
    BCCode: 119
    BCP1: 0000000000000001
    BCP2: 000000000000003D
    BCP3: 0000000000000006
    BCP4: 0000000000000006
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1
    Files helping to describe the problem:
    C:\Windows\Minidump\081112-18486-01.dmp
    C:\Users\Richard\AppData\Local\Temp\WER-34975-0.SysData.XML

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    If you are overclocking STOP

    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

    Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

    http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

    http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

    The procedure:

    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the contents of this folder
    Please, upload to skydrive or a file sharing service and put a link to them in your next post.

    Go to start > search/run > cmd > msinfo32 and include it in the upload

    To ensure the minidumps are enabled:

    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

    http://www.osronline.com/article.cfm?article=545

    Please also go to start > run > msinfo32 and record the results.  Send it with the DMP files, thank you.

  • I can't open firefox. Here are the details of the problem. Problem event name: APPCRASH application name: firefox.exe Application Version: 23.0.1.4974 app

    Problem event name: APPCRASH

     Application Name:	firefox.exe
 Application Version:	23.0.1.4974
 Application Timestamp:	520bc252
 Fault Module Name:	ntdll.dll
 Fault Module Version:	6.0.6002.18881
 Fault Module Timestamp:	51da3e27
 Exception Code:	c0000005
 Exception Offset:	00066448
 OS Version:	6.0.6002.2.2.0.768.3
 Locale ID:	2057
 Additional Information 1:	bfef
 Additional Information 2:	e8adce1c2b9e7be834b4063ac3c53863
 Additional Information 3:	bfef
 Additional Information 4:	e8adce1c2b9e7be834b4063ac3c53863

    Read our privacy statement:

     http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

    See if you can locate the program that belongs to the bitguard dll and uninstall this program.

    This could also be a problem with the report of Trusteer

    Try to update or uninstall and reinstall Trusteer report and if that does not help then disable/stop the program for now.

    • Start menu > programs > Trusteer report > stop report

  • Problem event name: BEX, error message

    Hello
    I'm working on a tool that is used mainly to replace the location of the batch of Crystal XI report data source, this tool works normally, but trying to change the location of the data source of some reports and mainly when a loop on the tables in the report to replace the source of data for each table, a Bex error is triggered

    In addition, DEP is disabled with the command ==> bcdedit.exe/set {current} nx AlwaysOff

    so

    I need to know what is BEX error?

    Why this error is generated when you work with some reports not all?

    How can I disable or circumvent this problem?

    Thank you very much.

    Hi m2.

    Thanks for giving this information. It is indeed useful.

    Done BEX reference except for buffer overflow. For more information on BEX, please visit http://technet.microsoft.com/en-us/library/cc738483 (WS.10) .aspx

    Could you please provide more information? I've included a snapshot of a BEX error for your reference. Please view the snapshot so that I can get you the resolution.

    Signature of the problem:

    Problem event name: BEX

    Application name: iexplore.exe

    Application version: 7.0.6001.18000

    Application timestamp: 47918f11

    Fault Module name: ntdll.dll

    Fault Module Version: 6.0.6001.18000

    Fault Module Timestamp: 4791a7a6

    Exception offset: 00087ba6

    Exception code: c000000d

    Exception data: 00000000

    The system version: 6.0.6001.2.1.0.768.3

    Locale ID: 1037

    Additional information 1: fd00

    More information 2: ea6f5fe8924aaa756324d57f87834160

    Additional information 3: fd00

    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    Take care.

    Kind regards

    Cedric M

    Microsoft Answers Support Engineer

Maybe you are looking for

  • set up my iPod touch 5

    should what username and password I enter when setting up my iPod 5 touch? After the screen location Service, the next screen asking to enter your credentials to authenticate your device by user name and password, what username and password?

  • Impossible to update on my Satellite Pro C660 display driver

    Hi, I have a Satellite Pro C660-2DN, and I'm trying to update my display on the site of Toshiba UK driver as Intel takes back me to Toshiba when I do their thing driver assessment. I downloaded the last three display driver updates that I can't in th

  • How can I make the FN keys work with your laptop more old?

    Hello I have laptop Satellite 5200-902. Unfortunately there is no support for such portable one 'old' as this on Windows Vista. Vista runs very well on it but the only thing I didn t do is to operate buttons FN in Vista. Can someone please give me an

  • Satellite P300: no sound via HDMI on HDTV

    Hi all I get video but no sound when I connect my laptop to my Toshiba HD TV.I looked at the settings, but they seem to be ok. Any help would be great.

  • 4071 DMM auto range

    Hello I am trying to develop resistance to 4-wire mode of auto range with a FlexDMM 4071 (5.5 digit) then change the range to the correct value to acquire a 7.5 figures measure. However I can't find a vi that sets the range of 4071 as AUTO? Thanks fo