Problem exporting in CS6

Similar Questions

• Problem exporting to tiara

  Hello

  I use a data acquisition card 6070E read the output of a sensor. I have a problem, export the data from the labview to tiara program.

  When my vi stops running, it displays the information on a waveform graph. I right click on the waveform graph and select "Export data to DIAdem", it opens the tiara, but randomly sets some values to zero, the duration and the actual values... It is sometimes only one or two data points, but sometimes (as pictured), it completely distorts the data. I have attached the vi and also an image of how it exports to tiara... The diagram should be with 10 cycles of a sinusoid of 10 Hz.

  Is there something I can do?

  Thanks in advance.

  Hi Sadegh,

  It of about a year since I looked into it, but I think all you need to do is to completely stop LabVIEW, use the attachment VI to replace the existing file on your hard disk, and then restart LabVIEW.

  ...\LabVIEW 2010\vi.lib\ExportToExcel\exportToDIAdem.vi

  Let me know if this doesn't

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Audio problems (Flash Professional CS6)

  I have 2 problems:

  I have a problem with the audio. The problem is that if I play audio lets say in the middle of the audio editing and press play, it will not play the song. But if I play of

  the beginning, the sound will play.

  My second problem is that

  Even if I play the audio from the beginning, and then press ENTER again to stop the music, it's just going to keep playing the audio.

  If you have encountered this problem on Flash CS6 professional or animate the CC (which I think has the same options as Flash Professional CS6)

  Please answer me.

  

• Wacom Cintiq 27HD Touch and problem of Photoshop CS6

  I have problems with Photoshop CS6 and my Cintiq. I have off contact. When I use a tool such as the brush in photoshop and then change after you have entered the text or cancel, or another tool or feature, my wacom pen does not respond. Anyone else have a problem with Photoshop CS6 and Cintiq 27hd touch? I'm on a Mac under OS X11.5.

  Restore default preference files

  Here's how to do it.

  Photoshop preferences

  Let us know if that helps.

• Problem exporting Lightroom cc

  I'm having a problem exporting photos in Lightroom CC after the last update.  I get a message "the file could not be written.  Any ideas?

  This occurs because of a permissions problem. The folder that you want to export towards not permissions writable by your user name.

  Change the folder to which it exports or check the permissions on the folder that you want to use, and give your user name of the permissions to read & write.

  You use a Mac, right?

• If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  Better is to import the cs5 project in the new project of CC.

  And Yes this could have problems, he could not.

  I would have ended up in CS5. Export to the lossless format and encode with SOUL CC until the final destination.

• LR5 won't export to CS6

  I just installed LR5 and extended CS6 (bought in2013) in 10 new computer window.  First installed CS6 then LR5.  LR5 would not export to CS6. Then times uninstalled and reinstalled LR5 first and then CS6.  LR will send the file over to the CS6, but nothing happens.  What I am doing wrong?  I'm not the person the most computer on Earth.  Thank you for your help

  Hi MrBrooklyn11219

  Please reset the preferences of Lightroom and Photoshop.

  For Photoshop. FAQ: how to reset my preferences?

  For Lightroom (save the catalog) Adobe Photoshop Lightroom Help | Set preferences for working in Lightroom

  Let us know if this helps

  ~ Assani

• I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation.

  I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. I'm on a Surface Pro Windows 3.

  Solution posted in duplicate message I'm having various problems installation CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. -This message of locking... MOD

  To contact our support staff, you must click on the following link: https://helpx.adobe.com/contact.html

  In at top right, sign in to adobe.com with your Adobe ID

  Select the category of assistance you need and once completed, you will see the blue band that still says "need help, contact us.

  A click on that and you should see options to chat/phone.

• Problem exporting from Lightroom to Photoshop CS6 4

  When you use the hotkey ctr E to edit in PS6 frpm LR4, several raw files are generated in PS CS6 and one stop creation when the PS is forced to closed.  Using the drop down in LR PS6 transfer smoothly done. I'm doing something wrong?

  Go to control panel > keyboard and check times "repeat." Try putting more time. You can test the repeat rate by entering key strokes using the area below the keyboard settings.

  If this does not work there is a problem with your keyboard. Try another.

• Problem exporting with multitrack - unplug files are silencers and 189kb size

  I use CS6 and I have a problem with multi-track export: I have six tracks and that you want to export all to separate files.  So I used the multitrack export option and selected the main track both individual tracks, however only the masters and the first two ways to export properly, the other four are all silent and 189 KB in size.

  I was assured all the outputs of the track are set to the master in the mixer.  I tried to export using the time selection or the whole track.  I adjusted my location of the temp files, tried to export the tracks one at a time, and again, it won't work.

  Export the master works very well, as do the first two tracks, it's just the remaining titles that are the problem.

  Any ideas what the problem might be?

  Hmm, that didn't help as I had hoped.  If you want to send me an e-mail directly to [email protected] , we can help out a little further without posting on the public forum.  I'd be curious to see if it's something that I can reproduce on my side.

  Thank you

• Problem importing file (CS6 Codec missing or inaccessible QT of MPEG-4 on PC)

  I read through several of the other threads associated with this problem and still do not have yet to fully understand what it is I do.

  As mentioned in the 'question', I work in Adobe Premiere CS6 (pc) and try to import an MPEG-4 QT. The file has been edited and exported Final Cut on a Mac some time ago.

  I downloaded MediaInfo to determine the codec, and, as I understand it the program...

  Codec ID: Quick time (qt)

  Video codec: hdv2

  Audio codec: sowt

  Given this information, how can I get the correct codec for adobe first or convert my file? Or is there another solution that I don't know how to proceed?

  http://forums.Adobe.com/message/3028713?TSTART=0

• Problems with Agency CS6 dlink AE

  Computer: MacBook Pro retina, i7 clocked at 2.6 ghz, 16 GB ram, 256 GB HARD drive

  Software: Adobe CS6 (V6.0.2) Master Collection via subscription creative cloud

  Graphics card: NVidia Geforece GT 650 M 1 GB

  Driver CUDA: V5.0

  OK I have some weird problem with a dynamic CS6 body binding to CS6 AE;

  (1) AE when dynamically linked runs in CUDA V4.0 makes by CPU but when openned runs directly in CUDA V5.0 renders by GPU

  (2) link dymanic AE is originally tear in XDCAM files has been fixed in 6.0.2 CS6 which I am running. The screen tearing is exported

  How to solve this?

  "Headless" version of After Effects, called by Dynamic Link can not use acceleration CUDA; treatment is done on the CPU.

  The XDCAM EX of tearing in first fix Pro CS6 (6.0.2) did not in updates for After Effects yet.

• InDesign epub export bug CS6

  I use Indesign CS6 to export an epub book. Problems with the machines and balls numbers and spacing issues. However, I made a few adjustments and get a pretty decent epub. Here's the question: when I convert my epub into Mobi by using Calibre, I get double chips and double numbers in my lists. I used the same process to create a file to Mobi in Indesign 5.5 a few months with no problems. So I took one of my files CS6, it has exported to IDML, opened in CS5.5 and exported to ePub. Then, I took this epub and converted into Mobi by using Calibre. No double chips or numbers. If the problem comes from Indesign CS6.

  Anyone else had this problem. Any other ideas on how to get a clean Mobi file of CS6?

  lotuscott,

  You should get the 8.0.1 update for InDesign CS6. It fixes several bugs EPUB, including the problem of 'space before' and the 'epub-Ruby"(that is, I thought for the Japanese language.

• Problems uninstalling Adobe CS6 Design Standard

  Hello

  I recently had to backup and wipe my mac and then transfer everything on it, which has now caused problems trying to open one of my apps of adobe cs6.

  Whenever I try to open them it says that I have to uninstall and reinstall applications (error 16).

  However, when I tried to uninstall CS6 it says I have that alias cannot open the original alias is found, with the options to remove or fix the alias.
  I don't really know what is the alias or how to fix it?

  Thank you

  Beak

  Two possible problems:

  (1) you cannot install software CS6 by copying a backup or migrate it. It must be installed by an original installer. If you do not have your installer that you can download here:

  CS6

  (2) CS6 in incompatible with El Capitan if you don't have the latest version of the Mac OS X software. You will need to use an earlier operating system.

• Problem exporting? : objects in front or on the upper layers are not displayed when exporting to jpeg or png

  It's very strange. The image looks perfect on board art .ai. But, when I try to export the image (in jpeg or png format), one of the objects which is clearly backward masks in front of other objects. I tried transfer to different layers to ensure that it wasn't one thing front to back, and it's the same problem.  When I changed the color to the front (or on the top layer) object from white to a color, it resembles a kind of effect/appearance/transparency problem goes away, but there is no transparency applied to each of the objects. They are all natural and 100% opacity.

  This is the banner of solid color behind the type indicated (see below) which is the problem. I tried regular objects (instead of specified type and same problem.) I just upgraded to the latest version of Illustrator, no luck.

  Here's what it looks like on my screen:

  

  but here's what happens when I export (or save for web)

  

  It seems, when I save in PDF, incidentally.

  Check that you do not have these elements the value "overprint"?

  Look at the attributes Panel when an item is selected.

  White text should NOT be set to overprint.

  ?