Problem gambling: shorten length display width

Similar Questions

• How to adjust the display width of fields?

  work in jdev 11.1.2.3.
  the form looks like DESIGNER Visual, all fields of the same length, and there is no width attribute to adjust. When run, some too long display fields.
  How to adjust the display width of fields in the design?
  Thank you.

  Hello

  You don't need to repeat once again, unless you have changed the properties after initial drag and drop.

  If you have changed, use the value #{bindings.yourAttribute.hints.displayWidth} to the columns property.

  
  label = "#{Bindings.Name.hints.label} '"
  required = "#{Bindings.Name.hints.Mandatory} '"
  * Columns = "#{Bindings.Name.hints.DisplayWidth}" *.
  maximumLength = "#{bindings.name.hints.precision} '"
  shortDesc = "#{bindings.name.hints.tooltip}" id = "it38" > "
  
  

  Thank you
  NGO

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Get the length and width of a rectangle

  I use sdo_sam.tiiled_bins in rectangles of bursting into different sections. I need to divide the rectangle along the x axis depending on if there is longer or wider. I checked the documentation and I couldn't find a way to get the length and width of a rectangle encompassing minimum. Is there any built-in feature to get the length and width of a rectangle or do I have to create my own? Database is 11 GR 2.
  
  Thank you
  Rob

  Rob,

  You can use SDO_GEOM. SDO_MIN_MBR_ORDINATE and SDO_GEOM. SDO_MAX_MBR_ORDINATE to calculate the length and width of a mbr.

  References:

  [SDO_GEOM. SDO_MIN_MBR_ORDINATE | http://docs.Oracle.com/CD/E11882_01/AppDev.112/e11830/sdo_objgeom.htm#i866250]

  [SDO_GEOM. SDO_MAX_MBR_ORDINATE | http://docs.Oracle.com/CD/E11882_01/AppDev.112/e11830/sdo_objgeom.htm#i866249]

  Kind regards
  Noel

• I have problems with the resizing of text box. I can only display width or height not both

  I'm new to Flash, I was able to create the text box and adjust the width and height, but now can only set the width. The box height is unusable. Did turn something off? I use the horizontal mode.

  Steve

  If you have the textfield value "Static Text", then the text space extends vertically so that it contains the text that you type in. You can adjust the width and height will change to accommodate the text content.

  If you change the "Input" or "Dynamic" textfield, then you will be able to resize the textfield that you want.

• Problem: Characteristics of Trace display no graphics

  I had downloaded a file of remote monitoring, Analyzer io notified me a successful, but characteristic trace result display no graphics:
  

  Name of work: exchange_loaddfdf

  Duration of the trace is 0 seconds

  Trace of contains 0 queries

  Logical block available in ranges of trace numbers from to

  Minimum disk size required to replay the trace with precision: 0 GB

  Trace of contains 0% reads and writes of 100%.

  
  

  But using vscsiStats EI trace_file command argument, I can get the contents of trace:
  

  write, 2147483713, 4096, 1, 215738104, 627935733713, 8207

  write 393216, 96, 23931272, 627936635248, 2147483662, 16392

  read, 49152, 12, 227885808, 627937646320, 2147483675, 12178

  write, 2147483723, 4096, 1, 224847424, 627940438783, 13619

  Can someone tell me what is the problem? Thank you.

  I just tried and was unable to reproduce your problem. One thing that I noticed that is on p.20 of the IOAnalyzer (a record of collection vSCSI) User Guide, the command in step #7 lack of output redirection symbol (">"). The correct command should be

  vscsiStats EI >

  After the order, please use the text editor to review the contents of the CSV output, which should begin with the following line:

  #Vscsi track of cmd. (Trace Format Version 2)

  followed by definitions for each column:

  #Command type, number series, length of the IO, Num SG inputs, NBA, timestamp (microseconds), command latency (microseconds)

  Excerpts from 4 lines you posted seem to be in the correct format. So please, just ensure that the redirection of output symbol is added to your order of "vscsiStats EI" and it should work.

  Thank you

  Dog-clerbois

• Problem with the length of the text fields of form in Firefox on OSX

  I just spotted a problem with this in a page on a site, with two forms side by side. (limited space has highlighted it.)

  FF on Mac is essentially longer text fields that any other browser:

  http://www.goodsafariguide.com/trade/loginfail2.php

  If someone knows a solution to do this, it would be great.

  If this isn't the case, I'll just reduce their length so that at least they are not crushed in any browser (even if they are going to be a little short in all browsers other than FF Mac).

  http://www.goodsafariguide.com/trade/loginfail2.php

  Thank you.

  Just use some css to specify width:

  {entry
  Width: 190px;
  }

• Problem with FLOAT and DIV widths

  I create a HTML page, and I would like to have three "modules" (for lack of a better word) along the bottom, each 180 pixels wide, containing textual information. I created my document like this:
  
  < div class = "module" >
  <!-here...-> content
  < / div >
  < div class = "module" >
  <!-here...-> content
  < / div >
  < div class = "module" >
  <!-here...-> content
  < / div >
  
  My CSS looks like this:
  
  Unit {}
  float: left;
  Width: 180px;
  margin: 15px;
  }
  
  .. Yet when I do this, the modules are stacked on each other rather than inline. After some research, it seems as if the "width" attribute that causes the problem. (If you look at This example- a similar situation - it works very well for them. They do not use a width attribute, but when I add a width attribute in their code, it breaks.)
  
  The confusion of mixture is that Dreamweaver 8 displays the page exactly as I want it in its internal browser, but Firefox and IE exhibit the problematic behavior, I have just described.
  
  Any ideas?
  
  Thank you.

  Thanks to everyone here who took some time to answer my question. Turns out I had a 'div tag "on the inside of each of my modules that launched off the coast of the layout, even if no style has been defined for this tag.

  I know it's something that could have been found easier had I simply posted the source code here... but the site I'm trying is confidential for my business, and I couldn't. Believe me, my first reaction was to do. However, your ideas certainly led me to the right solution. Thank you!

• Problems of mouse with display port 1.2 in MST (display 4K)

  With macOS Sierra, there is a strange thing with 4K display connected via DisplayPort DP 1.2 STD mode (required for the 60 Hz refresh rate).

  As the screen is divided into two screens sub in this mode - mouse behaved differently on each half of the screen. It seems that the right side of the screen has offset of mouse close to 50 pixels.

  With mode DP 1.1 standard there not such a phenomenon.

  My hardware is: MacBook Pro 15 "end 2013, display: DELL UP2414Q

  BR,

  Pawel.

  Hi Emmanuelle RLAP Guraj,

  I understand that your mouse works differently when you use it on the right side of your external display Dell. You can try to adjust the display settings of your system preferences and also check your display Accessibility settings.

  macOS Sierra: show the pane of the system preferences of monitors

  macOS Sierra: show the pane of system accessibility preferences

  I also reset the NVRAM.  How to reset the NVRAM on your Mac.
  
  

  What is NVRAM?

  A small amount of memory on your computer called "non-volatile random - access memory" or NVRAM, stores certain settings in a location that OS X can access quickly. Settings that are stored in NVRAM are dependent on the type of Mac you use and the types of devices on it.

  If none of the above resolves the problem, try to start the Mac upward in Mode safe mode to see if the problem exists. Try safe mode if your Mac does not start-up
  
  

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:
  Check your startup disk and attempts to fix problems if necessary directory
  Loads needed kernel extensions only
  Prevents elements start and the login items open automatically
  Disables the user installed fonts
  Delete font caches, hiding the kernel and other files of the system cache
  Together, these changes can help resolve or isolate issues related to your startup disk.

  These measures should have your mouse works as it should show everything using your external Mac OS Sierra. Please use the Apple Support communities to post your question.

  Good day.

• Can I change default display width in the integrated PDF Viewer?

  I almost always want to view a PDF in "page width" but the zoom default 'auto' setting always displays them to fill the height rather than the width of the window and I have to modify manually every time I find a PDF file. Can I change this setting somewhere?

  Hi cfcentaurea, you can define a view by default as follows: enter Subject: config in the bar firefox address (confirm the message information where it appears) & search for the preference named pdfjs.defaultZoomValue. Double-click it and change its value to the width of the page (this should affect all new documents you open).

  https://github.com/Mozilla/PDF.js/pull/3850

• Signs of Satellite L500-1DT - problem at boot - is displayed automatically

  When I start my laptop instead the usual Toshiba logo projection I get a black screen with white writing detailing the installed components & the usual instructions of pressing F button at the bottom.

  I had to disable my password box because it was automatically filling in the box with a load of points which was the wrong password.

  Loading subsequently I have Yahoo as my homepage, it fills the area of research with a line of commas without me touching anything.

  My comma key does not stick & also if I click on the windows logo below to display the start menu it whitens frequently fill the area search by commas.

  Any ideas would be welcome.

  Hello

  It looks a bit like the keyboard would be defective.
  I don t know why but it seems that the keys are pressed and will automatically appear without touching the keyboard.

  You may need to replace the keyboard to solve this problem.

• Problems in the strange display on my Satellite A205 driver

  My laptop came with 2 GB RAM and Geforce Go 7300 with a total memory of 399 MB. I bought this laptop about 4 months ago and had no problem with it until 2-3 weeks ago.

  I play World of Warcraft online game, and I know that this game requires no high performance to work properly. However, it is not the actual gameplay which is lagging for me is when I 'window' the game and then try to expand the window. What happens is the screen becomes black and 3-4 seconds later it turns with the maximized window.

  Then an error message your stay "your nvdlmm (sp) of display driver stopped responding but has been recovered." comes out in the lower right.

  Now the question: how worried I would be on this issue? Should I call Toshiba and ask them if they could solve this problem or is not something to worry about?

  Thank you.

  Hey Buddy,

  Don t you have to worry, but I suggest you to update your your machine display drivers, because it s is still better to have installed the latest drivers.

  Check these sites for the latest display drivers:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  This driver is the latest communicated to manufacturers ATI & Nvidia, but they have been modified to run on mobile systems as mobile graphics cards have different timings (GPU, memory, etc...)

  Welcome them

• Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

  Original title: windows cannot display HELP fire wall settings

  I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.

  I want to check that it is on.  Any suggestions?

  I can't also on the wall of fire to the security settings in the control panel.

  Help

  Hi TomFlow,

  1. which edition of Windows XP you are using?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  You can try to start the Fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  We can refer to the article and try the steps.

  You cannot start the Windows Firewall service in Windows XP SP2

  Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Method 3:

  You can also try the steps in the following article:

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

• problems connecting monitor to display windows xp

  I'm having a hard time getting my computer to connect to a monitor or projector.  When connected to a monitor, audio works fine, but the video shows that the static image of my desktop wallpaper.  I hear that I am currently running programs, but I can't see on the screen of the monitor.  The computer is running Windows XP.  I fiddled with color, screen resolution, refresh rate, and nothing changes.  I know the monitor works because my other computer that is running Windows Vista, works fine with it.  Suggestions?  The computer has an Intel Graphics Media Accelerator reader for mobile.

  Hello

  Check if the computer matches that of material for multiple monitors, you can check the link below: hardware configuration required for the display Support in Windows XP: http://support.microsoft.com/kb/296538

  You can also access the links below: how to configure and use multiple monitors in Windows XP: http://support.microsoft.com/kb/307873

  Resources for troubleshooting problems in Windows XP: http://support.microsoft.com/kb/307960

• Multiple monitors in the problem. External monitor display full desktop but no video in windows media player.

  I plugged a LCD TV to my laptop using a VGA cable. LCD TV display the full desktop.

  When I play a video in Windows Media Player video area is not displayed on the LCD screen, the rest all is shown.

  When I ran the player VLC video did not show, but when I changed the video option "overlay video output" i.e disabled this option, the video was shown on the LCD.

  But there is no option in WMP. How in WMP?

  What is the problem?

  Maryse Agarwal

  not a driver problem

  found the solution, I used both the computer laptop lcd and the external monitor

  When I went just outside, he played

  This is because the graphics card offers support for playback of the video when you play the video on the internal monitor

  Maryse Agarwal