Problem HTML link on the edge

Similar Questions

• Cannot paste the html link in the edit box of html for ebay using 24.0 FF on Kubuntu 12.04 - the destination of the link is displayed instead.

  In chrome and rekonq under Kubuntu 12.04, in all browsers including FF 24.0 under Windows 7 64 bit, ebay html editor (accessible by clicking on the 'HTML' tab next to the 'Standard' tab in the "Add a description" section of the "Edit registration" page) works as expected. For example paste a HTML from photobucket link to an image fits the link text in the editor. With FF 24.0 under Kubuntu 12.04 image is displayed, i.e. the link is followed.

  However, nothing is really stuck, the image is displayed, but nothing is changed in the HTML itself. Closure of the area of editing html and return to it details unchanged content.

  Paste the link into the Standard editor works as expected: the image appears in the wysiwg editor and go to the shows html editor html link was added.

  Editing in the html editor works as it should, pasted from an external source links are followed instead of being stuck in.

  Correction: this is not a problem with FF. Links pasted from another tab in the same instance of FF behave correctly. The problem is caused by pasting links from an external source. I don't see why links from external sources stick properly in other browsers, but of a life too short to investigate that.

• Problems re - linking of the DPX sequences

  I have a project that I'm trying to open. The DPX sequences in them are have cranked out because they were transferred on another hard drive. When I repeat in the timeline panel, each rhythm, there was a cut/edit, the DPX sequence starts at the beginning of the clip again. I noticed this problem on CS6 as well. How to connect DPX sequences in a project and have them work on a timeline where they already had changes?

  I fought this issue every day through CS5 and CS6, apparently it has been solved in CC.

  I've literally been replacement clips by manually, one at a time in the timeline panel.

  at the bottom of this thread is the CC solution.

  http://forums.Adobe.com/message/5516797#5516797

• Paragraph of hot text at the edge 3.0

  Edge 3.0 solves most of my sensitive questions, with one exception:

  I have a reactive animation (center stage: both; sensitive scaling: both).  This animation contains text; single line and multiline, animations of symbol text paragraphs, etc.  Everything works reactivates when I discover the native file html created by the Edge animation on its own, but when I integrate animation in one of my website div containers, the lines of text in the paragraphs of text multiline jumble together - on the other.

  No idea as to what is wrong?

  Thank you.

  Agnes:

  I tracked down the problem.  For some reason, a height adjustment of line in my typography CSS file created this problem:

  line height: 1.5em

  I don't understand how this could impact the animate however file.  Like some I deleted this setting, the animation worked well.

  Thank you

  Steve

• Problem with links in Dreamweaver CS3 site root

  I have problems with the links from the root of the site when I'm working on my localhost with Dreamweaver CS3.
  
  I'm building a site with PHP, MySQL using the WAMP server. I have a page (www.site.com/index.php) I want to copy in the subdirectories (e.g. www.site.com/about/index.php) then I want to do the copy as painless as possible by using the links from the site root (e.g. /about/index.php). It works on the internet but NOT on localhost.
  
  Why is this? What can we do? Is there a fix if it is a bug? This seems like a simple thing, but it's such a problem.

  > Why is it?

  Because when your (local) server see is you run to the
  ROOT, he goes to ITS root, and rather than the Web site root (for example, htdocs or Inetpub).
  You can work around this by using virtual hosts (google it).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "KBwebpro" wrote in message
  News:fr6g48$GS4$1@forums. Macromedia.com...
  > I have a problem with links from the root of the site when I'm working on my
  > localhost with Dreamweaver CS3.
  >
  > I am building a site with PHP, MySQL by using the WAMP server. I have a page
  > (
  (> www.site.com/index.php) I want to copy in the subdirectories (for example
  (> www.site.com/about/index.php) if I want to make as painless print
  > as
  > possible using links from the site root (e.g. /about/index.php). He
  > works
  > on the internet but NOT on localhost.
  >
  > Why is it? What can we do? Is there a fix if it is a bug? This
  > seems
  > like a simple thing but it's such a problem.
  >

• My links in the html page do not work in Firefox.

  I made som links in the same page in HTML, and they do not work in Firefox, although they work fine in Internet Explorer. I tried everything on this page: https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a & s = links + don % 27T + work + in + firefox & r = 19 & as = s

  This has been a problem for years. Why not in page anchor links work? I'm just using html with Wordpad to create my pages, not CSS.

  Rules of the House at the top of the page.

  <a href="#PCgen">Character generation</a>

  <a name="#PCgen"><center>
  	<img src="KFR0 images/buts/bar swordcloth.gif" width=500 height=80>
  </a></center>

  It would be in the correct manner. Clear the # and close this tag a name immediately.

   <a name="PCgen"></a> <center>
  	<img src="KFR0 images/buts/bar swordcloth.gif" width=500 height=80>
  </center> 

• Yet created the animation flash with HTML link

  Having some problems with (in CS6) recently.

  Use it to create a flash with the link of file HTML file.

  Flash is installed and running, but when clicking on the index file I just get the black box and nothing else in the web browser.

  Tried Firefox, IE and Chrome, all with the same results.

  It worked well on 09/05/16 but the 15th, it had stopped working.

  The play flash file directly works without any problem.

  Any help or ideas would be appreciated.

  I took a few minutes. An old yet to Flash projects displays the player controls and does not work. A new export shows no control and does not work.

  Nothing has changed in still (it has not been updated for a long time). Flash (23.0.0.162) and I don't think that has changed. I don't remember when it worked last.

  So I headed to the forum Flash and discovered that it was a new version of flash (5 days ago) which has the default value no local file access. It's a security issue. See this link for the workaround:

  Flash Player 23 23 AIR release notes

  All good once again!

• Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team at the 800 448 custom

  Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team customer to 800 448 1642 for assistance. my credit card is already loaded, but not received numbers.please series suggest

  Hi Kunal,

  If the problem still persists, can you please contact the support for this issue through https://helpx.adobe.com/support.html#/top_products.

  Please do not hesitate to me message in person if assistance is needed.

  Concerning

  Stéphane

• How to make the link in the animation of edge?

  Hello

  I'm generating a link with php.

  I need the link to be introduced in my animations.

  I cannot hardcode the link into the animation through edge animate because the link is constantly evolving.

  Anyone have any ideas?

  Or if you know a way to encapsulate a tag embed html with an anchor tag, that would work too.

  Thank you

  Nexx

  Hi, first of all, if you use php to generate the dynamic link, then you will need wrap your project animated dashboard inside another php document, you can do this with the code below:

  <>

  include ("dynamicLink.php"); PHP file where your dynamic link is generated

  include ("edgeAnimateProject.html"); HTML EdgeAnimate file

  ?>

  This wrapper will then pull in your php file that generates the dynamic link. Inside of this php file you can activate the dynamic link php variable in a javascript variable by using the following code.

  http://www.Adobe.com ";? >

  If this dynamic link should then be used on a button you would then add the following code to a click action in your project EA code window:

  Window.Open (dynamicLink, "_blank");

• Link to the Gallery module problem

  I have a photo gallery module on http://grapeleafcafeandgrill.BusinessCatalyst.com/Gallery.html links low on the right do not run properly. Can someone please help me with this?

  I am answering my own post. Please do not take into account. I was in a bootstrap carousel to solve my problem.

• Link on the Web page does not work in published HTML project

  I use 8.01 Captivate and created a project with a link to a URL of page web (I did by the insertion of the text links).  It works perfectly when I publish as an executable.

  Customer has requested that we publish now in the form of HTML/SWF file.  The link URL (set to open in a new window) does not this version.

  I changed the link at a click box with the action to open the web page in a new window.  Again, it works when you publish an executable file, but not when I publish to HTML.

  The OUTPUT of course links also do not work in the HTML version.

  We use IE11 to launch the HTML file.

  Any help will be greatly appreciated!

  Thank you!

  Hi Betty,.

  It seems to be a problem with the Flash security settings.

  Please follow the steps (these steps are for Firefox and IE) below:

  1. Publish the project to a folder on the c drive.
  2. Open the html of the published output.
  3. Do the right click on the screen and go to global settings.
  4. Go to the advance tab.
  5. Scroll down and click on trusted location settings.
  6. Click Add > add folder and navigate to your published folder and add it. (You can also add full lecteurC so that you don't have to do it again for all projects)
  7. Click on confirm and then close it.
  8. Now, re - open the html file and try to view attachments.

  These parameters are only made when you view the content locally. If you place the output on any server, then you must not make these settings.

  Hope it works... !

  Kind regards

  MILIN

• Problem with drag layers on the edge

  Hello

  I have 2 layers on the edge.  The top layer is told to drag left and stop, revealing the layer underneath, which works fine in the preview of edge.  When I bring it in DPS, it does not, the two layers seem to stick in a single layer.  No idea why the two layers seem to be interpreted as a layer of DPS and can around it?

  Thank you.

  Hi Elaine,.

  I think I fixed it, the timeline has been the problem.  Initially, I got it to spend more than a second.  I extend it out of 2 seconds and with a bit of acceleration seems to have settled the problem.

  I have another problem, however, and is linking this animation to another article in an another folio in inDesign.  Any ideas?

  Thank you very much for getting back to me.

• Problem - links on the top and left side Nav Bar do not work.

  Operating system - Mac Lion, software: GoLive 5 and a Version of Dreamweaver 11 now

  My accessories page is the only one that works; However, 2 link colors are purple and white, not as they should be according to the browser you use. The purple link changes Word for word in the navigation bar according to the browser.

  I did a check page contains links, but not broken links?  I tried for days, but I can't find the problem. I create and transferred the site using GoLive 5. I downloaded the file on my computer by using the most recent version11 of Dreamweaver.

  Here are the links to the home page and the accessories page.

  «"" "AwardZone home page: http://tonydi.ipage.com/az_site/AwardZone/ »»»"

  Accessories Page: http://tonydi.ipage.com/az_site/AwardZone/accessories.html

  The links on the accessories page can take you to other pages that the links doesn't work.

  I am self-taught and I don't know that I have a lot of Code that can be eliminated. so any suggestions would be greatly appreciated. However, my first concern is to solve this problem of navigation on all my existion pages and new pages that I create.

  Thank you

  Keitodd29

  Here's the truth: these pages are a mess.  You'd be much better off to rebuild than to try to fix those you have.  They are full of GoLive proprietary code and if you are not familiar with HTML you will lose only your mind.

  Start over.  Please, I beg you.

• Styles of multiple links on the same Page - problems

  Thanks in advance for your help. With the help of CS5.5

  Problem:
  I'm designing a model that uses images by hovering in the top nav links. When the style
  other links in the main content and the footer, sections, the style becomes hereditary since the links at the top.

  Tried everything, including:
  -Spry
  -separate style sheet for the page footer
  -Renaming the div
  -using the class instead of div

  -renamed CSS
  -curse/pray/crossing my fingers

  Have not tried to reinstall the software.

  Here is the html and CSS (as attached):

  HTML

  <!-TemplateBeginEditable name = "doctitle"-->
  < title > Untitled Document < /title >
  <! - TemplateEndEditable - >
  "" < link href = "... / _css/pages.css" rel = "stylesheet" type = "text/css" / >
  <!-TemplateBeginEditable name = "head"->
  <! - TemplateEndEditable - >
  < / head >

  < body >
  < div id = "outerWrapper" >
  < div id = "headerPages" >
  < ul >
  < li > < a href = "#" > link 1 < /a > < /li >
  < li > < a href = "#" > Link 2 < /a > < /li >
  < li > < a href = "#" > link 3 < /a > < /li >
  < li > < a href = "#" > Link 4 < /a > < /li >
  < li > < a href = "#" > link 5 < /a > < /li >
  "< li > < a href ="... / index.htm "> link 6 < /a > < /li >"
  < /ul >
  < div id = "logo" > placeholder logo < / div >
  <!-TemplateBeginEditable name = "pageTitle"->
  < div id = "pageTitle" >
  "" < h1 > < img src = "... /_images/NAV-Icon-Big.jpg" width = "66" height = "66" / > Page title < / h1 >
  < / div >
  <! - TemplateEndEditable - >
  < / div >
  < div id = "contentWrapperPages" > <!-TemplateBeginEditable name = "mainContent"->
  < div id = "contentCol1Pages" >
  "< p > < a href ="... / web - design.htm "> 1 < /a > < /p > column"
  < / div >
  <! - TemplateEndEditable - > <!-TemplateBeginEditable name = "sidebarContent"->
  < div id = "contentCol2Pages" >
  < p > < a href = "#" > column 2 < /a > < /p >
  < / div >
  <! - TemplateEndEditable - >
  < / div >
  < / div >
  < div id = "footer" >
  < ul >
  < li > < a href = "#" > the footer elements go here < /a > < /li >
  < /ul >
  < / div >
  < div id = 'copyright' >
  < p > & copy; 2011 < /p >
  < / div >

  < / body >
  < / html >

  CSS

  {body
  background: #EEF4F7;
  }
  {#outerWrapper}
  Width: 960px;
  margin-right: auto;
  left margin: auto;
  Background: #FFF;
  }

  #logo {}
  Width: 200px;
  height: 75px;
  padding-top: 10px;
  }
  #logo img {}
  padding-left: 50px;
  text-align: center;
  vertical-align: middle;
  }
  {#pageTitle}
  height: 66px;
  Width: 525px;
  top of the margin: 30px;
  }
  #pageTitle img {}
  padding-right: 10px;
  text-align: center;
  vertical-align: middle;
  padding-left: 25px;
  }
  #pageTitle h1 {}
  do-size: 2em;
  make-style: italic;
  color: #039;
  do-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
  vertical-align: middle;
  margin: 0px;
  padding: 0px;
  }

  {#headerPages}
  Background: url (.. /_images/pages-Header.jpg) no-repeat;
  height: 200px;
  Width: 960px;
  }
  #headerPages ul {}
  list-style: none;
  float: right;
  / * width [disabled]: 680px. */
  }

  #headerPages ul li {}
  float: left;
  }
  #headerPages ul li a {}
  text-decoration: none;
  display: block;
  do-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
  }
  #headerPages ul li a: link, a: visited {}
  padding: 5px 15px of 35px.
  color: #039;
  }
  #headerPages ul li a: hover, a: active, a: {emphasis
  padding: 5px 15px of 35px.
  Background: url (.. top of /_images/NAV-ICON2.jpg) no-repeat center;
  color: #039;
  }

  {#contentWrapperPages}
  Background: #FFF url (none) horizontal;
  float: left;
  Width: 960px;
  padding-bottom: 15px;
  Police-family: 50;
  }
  #contentWrapperPages a: link, a: visited {}
  color: #039;
  text-decoration: none;
  }
  #contentWrapperPages a: hover, a: active, a: {emphasis
  color: #0 C 0;
  text-decoration: none;
  }
  #contentWrapperPages img {}
  float: left;
  height: 75px;
  Width: 75px;
  }
  {#contentCol1Pages}
  Background: #FFF;
  float: left;
  Width: 650px;
  padding-right: 10px;
  padding-left: 10px;
  margin left: 25px;
  margin-right: 10px;
  }

  {#contentCol2Pages}
  Background: #FFF;
  float: left;
  Width: 200px;
  padding-right: 10px;
  padding-left: 10px;
  Clear: right;
  }
  #footer {}
  Width: 960px;
  Background: #FFF;
  margin: 0px auto;
  Clear: both;
  height: 50px;
  }
  #footer ul {}
  list-style: none;
  text-align: center;
  / * Displays [disabled]: block; */
  }
  #footer ul li {}
  display: block;
  text-align: center;
  }
  #footer ul li a {}
  padding: 10px 5px;
  color: #039;
  text-decoration: none;
  }
  #footer ul li a: link, a: visited {}
  do-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
  color: #039;
  }
  #footer ul li a: hover, a: active, a: {emphasis
  color: #0 C 0;
  }

  #copyright {}
  Width: 960px;
  margin: 0px auto;
  }

  #copyright p {}
  do-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
  text-align: center;
  }
  

  Much better if you post your problem webpage and post a link here so we can see the direct page in our browsers.

  However, the first glance to the CSS, the syntax of selectors together needs to be amended.

  Each element separated by commas in a grouped list of selectors should be clearly explained in its entirety

  e, g,

  change

  #headerPages ul li a: link, a: visited {}

  padding: 5px 15px of 35px.

  color: #039;

  }

  #headerPages ul li a: hover, a: active, a: {emphasis

  padding: 5px 15px of 35px.

  Background: url (.. top of /_images/NAV-ICON2.jpg) no-repeat center;

  color: #039;

  }

  TO

  #headerPages ul li a: link, #headerPages ul li a: visited {}

  padding: 5px 15px of 35px.

  color: #039;

  }

  #headerPages ul li a: hover, #headerPages ul li a: active, #headerPages ul li a: {emphasis

  padding: 5px 15px of 35px.

  Background: url (.. top of /_images/NAV-ICON2.jpg) no-repeat center;

  color: #039;

  }

  It is for all other groups of rules separated by commas.

• Player fails to link to the HTML file with the relative file specification.

  I use a PC running Win XP and Adobe Reader 9.3.4

  Adobe Reader says that it cannot find a file even if it gives the correct path and spec in the error message?

  In LaTeX, I use the hyperref package to produce a pdf document called pratiques.pdf

  \usepackage[pdftex]{hyperref}

  
  This works...

  
  CASE 1) my pratiques.pdf contains the following statement.

  
  \mbox{\href{run:./answers.html}{\Huge\textcolor{magenta}{$\bigstar$}}}solutions

  
  The agreement of file and directory is...

  /foobar/questions.PDF
  /foobar/answers.html

  The user clicks on pratiques.pdf, then within this pdf document when the user clicks on the magenta Star (link), answers.html starts in the browser. Perfect!

  
  It does not work...

  
  CASE 2) my pratiques.pdf contains the following statement. This time answers.html is located in a subdirectory from questions.html

  \mbox{\href{run:./exercise1/answers.html}{\Huge\textcolor{magenta}{$\bigstar$}}}solutions

  
  The agreement of file and directory is...

  /foobar/questions.PDF
  /foobar/exercise1/answers.html

  
  The user clicks on pratiques.pdf, then in this pdf document, when the user clicks on the magenta Star (link), answers.html cannot be found.

  Frustrating is that Adobe Reader allows the specification of OK in the error message file when he says that it cannot find the file! ??

  I tried enclosing the specification of file within various quotes etc, but I just can't get this relative file specification to find the HTML file. I wish it works so I can apply a structure for the structures of files for this work.

  Any help much appreciated.

  Kind regards
  Brad

  Reader 9.3.4 cannot open files in sub directories (and all other directories), but if you move the files to the same directory where the pdf file is, they can be opened. Other people in the forums has encountered the same problem)

  ( http://forums.adobe.com/thread/714892?tstart=0). I guess everyone will meet the problem when they click links in a pdf document that point to files in other directories. 9.3.3 seems do not have the problem.