problem in access to LAN PC readers (xp 2) Server (2003), but the Server driver is accessible by these PC.

Similar Questions

• Problems connecting to internet - says network cable disconnected, not sure I have the correct driver installed.

  Had a big storm - got the new modem.  but they said that my drivers where missing or damaged.  Downloaded Marvell Yukon of gateway - to the GT5432 model. Always says cable unplugged network. However, Bishop says peripheral device works correctly. Don't save: no update-unable to connect to the internet.  I uninstalled and reinstalled; rebboted, etc. - still nothing. It has a problem with the PCI connection - no driver, but I don't see anywhere to down load or know what to download. Oh and another adapter on - think 1394 - when I turn that on and off the wonder; It shows the signal for the 1394---400 and does not say his unplugged, but still can not connect to internet.
  The "old" computer to try to find information; noticed that said, unplugged network cable but it allowed me to connect to the internet. When I disabled the 'extra' adapter message there went, speed signal only at 100 than at the 'old' calculation is not any other PCI devices connection listed.

  I'm not sure of what continues.

  The 1st computer was working fine - then picked it up to move it to where it belonged to my office and that's when he went out-made no sense to me!

  Because you seem comfortable opening your computer, have you tried re - a corner of the map (with power off, remove the card and reinsert it into the slot, be sure to exercise static precautions if you are in an environment of low-hu7midity).  If there is an empty slot, you can also move the map Marvell to another location.  See the comments below.

  It's a long shot, because even if you did not provide the complete ipconfig output, the data that you have provided appeared to be normal, but...

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your network adapter, and then select Properties
  You should see a screen like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Local_Area_Connection/Properties/General/Index.shtml
  Issues related to the:
  In the upper area, under 'Connect using' said 'Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller?  If this is not the case, what does say?

  In the second box, what are the items are listed under "this connection uses the following items"?

  The only other thing I can think is that the Marvell Ethernet card was damaged in the same storm that got your original modem/router.

  *******************************************

  According to Gateway, the GT5432 has 4 card slots:
  A PCI Express x 16 (GUI)
  A PCI Express x 1
  Two PCI Conventional

  Your motherboard should look like this:
  

  Orange, top, connector is the PCI Express x 16.  You probably have a video card in this slot.

  The short white connector is the PCI Express x 1 connector.

  Two more long white connectors are the standard PCI slots.

  If I understand your installation, you should have the Marvell Yukon map into the slots of two down and your Agere modem on the other.  As long as you have the SMC1244TX PCI card, why don't just remove you the Agere modem or the card Marvell and insert the card CMS in one of the two PCI slots?  You are not using the modem and the working hypothesis is that the Marvell card does not work, so there is not much to gain by leaving a card in your computer.

  Download the user guide and drivers for the SMC here--> http://www.smc.com/index.cfm?event=viewProduct&localeCode=EN_TUR&cid=9&scid=51&pid=238 map

  Moreover, assuming that your open slot is the short PCI Express x 1 slot, you can buy another Ethernet card that will work in this niche: see--> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010064%20600016290&IsNodeId=1&bop=And&Order=PRICE&PageSize=100

  If I were you, I blow up the cheaper models and get the Intel EXPI9301CT $ 36 10 / 100 / 1000 Mbps PCI Express Desktop Adapter Gigabit CT.  Note that this is the same card with a similar name (with close to 400 customers) which sells for $29,94.  The price difference is because the cheaper "BLK" letters in the description, which means that it is "sold in bulk" and has no drivers, user guide CD or anything else in the box.  There are several negative comments from people who do not understand this difference and then had trouble finding the driver for the card on the Internet.

• I'm adding several modules of memory, BUT I can't access the 4th slot. How can I move the disk drive?

  I bought two modules of memory to upgrade my HP s5250t model, but the disk drive is in the way. How can I move it so I can access that 4th slot?

  ohgioia2 wrote: I bought two modules of memory to upgrade my HP s5250t model, but the disk drive is in the way. How can I move it so I can access that 4th slot?

  Hello ohgioia2, here is a link that contains information. I don't know if that's enough to get the last memory module.

  I don't think you would need to completely remove the DVD disc, but just push forward enough to access the memory.

• Cannot install the printer driver - error of access denied

  I have two laptops Inspiron 1545 new running Windows 7 64-bit edition that expose that same question.  I'm trying to get an Epson color Stylus 760 working with them via a USB connection.

  When I join the starting the unit is correctly recognized, but the Epson driver does not install correctly.  If I run Windows Update, the Epson driver is listed as an optional update.  If I select and run the update, it fails with 80070005 error.

  If I go into Device Manager, the printer is listed as a printer USB that does not run as properly as there is no driver.  If I choose "put updated pilot" from the Device Manager, it downloads successfully the driver (even such as mentioned in Windows Update) and when you try to install the driver it comes back with an error "access denied."

  As mentioned previously in this case with two laptops.  In both cases I was logged under an administrator account, but not "the" administrator account.  I have enabled the administrator account and tried to install it through this, but it made no difference.  I tried also to remove and reinstall the device without success.

  The Windows 7 compatibility site said that the printer is compatible with Windows 7 64 - bit edition.

  Hi Shawn,

  In my view, that there is a driver 64 bit Windows 7 according to the guidelines of this site:
  http://www.Epson.com/cgi-bin/store/support/supAdvice.jsp?BV_UseBVCookie=Yes¬eoid=147071&type=highlights

  The Epson Stylus Color 760 is a 'built in the Windows 7 driver.

  Nevertheless, I will try your suggestion if Alan does not work.

  Kind regards

  Dan

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Internet access (W - Lan) but the symbol in the taskbar looks as if it was searcheing

  I have access to the internet (W - Lan), but shows the symbol in the taskbar on the right side of the bottom of the screen that I havn't. All beams of force field are grayed out and the little sun is visible, as the system does when it searches for a network connection. As said, I have access, but the symbol seems strange, as it is looking for a W - Lan net.

  Can anyone help?
  Thank you

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. use Windows Wireless Management or another Manager?
  2. don't you make changes to the computer before the show?
   
  Follow the steps and check if that helps:
  a. click on Start menu and enter regedit in the search bar and press ENTER.

  b. go to:

  Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify HKEY_CURRENT_USER

  c. remove the following key data in this folder:

  IconStreams

  LastAdvertisement

  PastIconsStream

  PromotedIconCache

  UserStartTime

  d. open the Task Manager.

  Switch to the processes tab.

  Kill all the process explorer.exe

  (This is necessary because the explorer.exe has a copy backup of this key in RAM and rewritten it in the registry during shutdown)

  Switch to the applications tab of Task Manager.

  Press "new task".

  Type "explorer.exe" and press [Enter].

  WARNING: Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

   

  See also:

  http://support.Microsoft.com/kb/937477

  I hope this helps.

• I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

  I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

  I think they mean JavaScript.

  In your Safari menu bar, click Safari > Preferences and then select the Security tab, and then select: Enable JavaScript

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• NB510-108 problem with wireless and lan controller

  Help, please!
  (answer in German would be nice, ill try English first tho)

  I installed ubuntu 12.04 on my toshiba NB510-108 (PLL72E-00R011GR) and then I was not able to go online via wlan or lan same kable.
  After some effort to install the drivers through ubuntu I have installed windows 7 starter edition back but now windows does not install the ethernet / wireless drivers realtek or atheros network device.
  so I tried to install all the drivers wireless by http://toshiba-asia.com/sg/support/drivers/ but now when I try to run these drivers after loading them down windows 7 cannot install correctly, it says that there is a compatibility issue. I tried to run these drivers in compatibility mode for win xp sp1 and win vista sp1 without success.

  Also, I installed all the drivers for my model of http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE here with some of them have been properly installed and even when I get my system to a point where I find the two network devices work as 'good' in my windows Device Manager, the following problem occurs again:

  I can't find any of my netbook WiFi network (wlan is enabled via fn + f8) no matter what type of router I try to connect. other laptops have about no problem connecting to routers so that can't be the issue. When I click on the windows just below the wlan troubleshooting info it only says no problem could be identified (the system is in German, so please excuse my translation)

  In the information system components and devices of problem the pnp for the ethernetcontroller said pci\ven_1969 & DEV_1090 & SUBSYS... and for the networkcontroller: PCI\VEN_10EC & DEV_8176 & SUBSYS...
  If it is useful. I also wanted to put my dxdiag online file, but this extends the limit to 3000 characters.

  Someone here could help me please? It would be really nice

  Hello

  I m wondering why you have the same problems of connection using WLan and LAN.
  I mean its not really necessary to configure anything to get a connection to the local network works.
  The router must support, and DHCP must be enabled in order to assign the IP address automatically.

  I recommend that you check the TCP/IP settings in your network WLan and LAN connections.
  In TCP/IPv4, you can view the properties. The INVESTIGATION period and all other options should be set to assign automatically. You should also disable/uninstall the TCP/IPv6 and must use TCP/IPv4

  By the way: you have an antivirus and firewall software installed? If so, remember that the two don't affect the WLan/LAN connection.

• Re: Problems with Satellite L755 LAN

  Until recently I bought a Toshiba laptop and after going through a lot of trouble finding the right drivers, I tried to connect to the internet via a modem (a switch in fact), but it says * currently connected to: unidentified network / internet access *.

  The wireless connection works fine, but the problem is that I can not connect via the switch. I ran ipconfig/all and he says state of the media: media disconnected.
  I have windows 7 / 32 bytes. I tried everything I found on the Forum, now I have more solutions.

  Help, please!

  >.. .a very difficult to find the right drivers
  You find all the drivers? If this isn't the case, you are missing?

  >... but the problem is that I can't connect via the switch
  Sorry, but I don't understand what do you mean with switch.

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Satellite U300 PSU30C - Toshiba flash cards and problem of accessibility tools

  Hello

  My toshiba Satellite U300 model is not. PSU30C-TP908C with windows vista installed

  I'm going into a big trouble for a reason, all keys of "F1 ~ F12" are due to a malfunction. When I press them, they do not work like what its supposed to do, instead they all became the functions that you would when you press on them while pressing the "Fn". So now if I press F1, I actually get a count locked instead of launching the Help window. By pressing 'U, I, O, J, K, L, M' would print a number of participants, but if you put 'ON' on the numeric keypad by pressing on "F11"(Notez que je pouvais le faire sans avoir à tenir le Fn), these keys will be back to normal. "» Space bar does not work little matter what you do. The numbers "1, 2" above 'Q, W' did not work either.

  Another thing, I discovered, is that when I try to open accessibility tools in the utility of toshiba. He said: "this system does not support this program.

  I tried to find updates of these utilities, but I couldn't find those suitable for my toshiba. I went to the toshiba support page, click Download, and he invites me to choose my cell phone number and the model of toshiba. However, in the list of toshiba satellite U300, there are only 3 models and none of them are PSU30C-TP908C. I didn't know that one is compatible with my model, so I gave up to find the updates.

  Another thing I tried is to go back to factory State with the system recovery disks provided by the futureshop that I got my toshiba of. I restart my laptop with the disc in the dvd player. But I realize that the BIOS is actaully set to boot from the hard drive. So I'm trying to get the startup list by pressing F2 or F12, but the F2 and F12 keys do not work because their functions are already outsourced functions you have with "Fn" would hold down.

  Could you please tell me if there is a known issue. Y at - it an update to fix this problem? How can I find updates for my toshiba utilities if my model is not listed on the support page? If none of the above is possible, could you please tell me how can I me to the startup list without pressing F2 or F12, so that I can use the recovery disk?

  See you soon,.
  Chi

  Hello

  Normally, you can find all the drivers on page Toshiba Canada for your laptop:
  http://www.Toshiba.ca-online Support => Mobile Computing

  Keys FN on Windows, you need the added value package. You can find it on the Toshiba site. Remove the old version and restart the laptop. Then use CCleaner to clean the registry, and then install the version.

  But be honest, if you can t get into BIOS because with F2 I think that it s a malfunction of the keyboard and it has nothing to do with the tools of Toshiba.
  In your case I would test an external keyboard and lets you determine if she s an internal keyboard problem or not.

  Good luck!

• DVD Super Multi Drive problem - cannot access any CD - Satellite A100

  Hi, 1st post:

  My Satellite A100 features a DVD Super Multi drive, which worked very well. However I cannot now access any CD - error message ' D: / is not accessible. The request could not be performed because of an i/o device error."is displayed.

  However I can still access DVDs without problem. Can anyone help?
  Thank you.

  can try this
  Right click on the drive w / the problem
  Properties
  Recording tab
  and then check the box "enable recording on this CD player.

  If this does not solve it you have Roxio Easy CD Creator is installed to check this
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

  or if you get an I/O device error message, this problem may occur when Windows tries to use a transfer mode that can not use your CD player
  RESOLUTION
  To resolve this problem, change the transfer mode for your CD drive in IDE channel properties. To do this, follow these steps:
  1. Click Start, right click my computer and then click on manage.
  2. under the (Local) computer management, click Device Manager.
  3. in the right pane, expand IDE ATA/ATAPI controllers.
  4 right-click the channel where your CD drive is connected, and then click Properties. In general, this channel is secondary IDE channel.
  5. in the Advanced Settings tab, in the zone transfer Mode for the device that represents your CD-ROM drive, click PIO only. As a general rule, this device is device 1. And then click OK.
  If the problem is not resolved after you change the transfer mode for the secondary IDE 1 channel device, your CD drive should not be located there. Use the same procedure to return to the DMA transfer mode if available. Then, repeat these steps to change the transfer mode for IDE devices in the following order until the problem is resolved:
  Primary IDE channel, device 1
  Secondary IDE channel, device 0
  Channel IDE primary note, device 1 is connected to your boot disk. It's the hard drive that contains your operating system.

  hope that fix you :)