Problem in EBS with rtf in Word Model Builder model

Similar Questions

• Old problem with Spotlight and Word .docx files

  There is an old problem with Spotlight not finding the Word .docx files.  You can find old discussions about it since 2008.  But despite this problem being old has never been resolved.

  The essence of the issue is that Spotlight relies on a variety of software modules for the index files.  Projector selects the module suitable for each type of different file of the index.  These indexing modules all have the suffix of file .mdimporter.  Name of the module for indexing Microsoft office files is "Microsoft Office.mdimporter" and it can be found with a few other modules of .mdimporter in/library/Spotlight /.  The "Microsoft Office.mdimporter" module has rights author of Microsoft inside its packaging info so we know who wrote it.  But this module is included with all new Macs from Apple.  This is perhaps why this problem has never been corrected - the software is written by Microsoft, but delivered by Apple.

  The symptoms of the problem are that Spotlight will find no content in some .docx files.  It is unclear why it fails on some .docx files, but not others.  This problem does not affect other Microsoft formats such as .doc, .xls, .xlsx, etc..

  Because Apple wants to sell Macs to business, and companies make heavy use of MS Office in general, we could think that it would be a priority to fix.  But given that this problem is 7 years old and still not resolved I do not.

  Any suggestions on possible alternatives would be welcome.

  After further investigation, I discovered that the problem is not with "Microsoft Office.mdimporter" as I had thought.  If we run the mdimport(1)-d1 you can see what importer is used. It turns out that for the .docx files, the importer is called 'RichText.mdimporter' which has a copyright by Apple.  And if you use mdimport(1), the file will then be found by Spotlight.  If the issue is not the importer, but rather everything that is triggering the importer to run the .docx files updated.  Here's to blame Microsoft for this one...

  As a workaround, I force indexing my files .docx with a Bash script, which is started by cron.  The script indexes all the .docx that have been modified in the last 24 hours and runs every hour via cron.  If someone is interested in the details just post here and I'll include the script in another post.

• Problem of saturation with 741 models

  Whenever I saturate a 741 op-amp by exceeding the limit of his positive supply voltage, the output saturates at the negative supply voltage.

  For example, if I build a voltage follower with +/-15 V supplies and an entry of + 20 V, the output is (approximately) - 15 V, not + 15 V.

  This product with a variety of 741 op-amp models, such as LM741 *, UA741 *, 741 and Op-Amp_741.

  I've seen similar problems with some other families of op-amp I've tried.

  Is this a limit known of these models in Multisim, or I do something wrong?

  For an example, see the attachment.

  Thank you

  Bob

  yyao wrote:

  Hello

  This problem may be due to the inversion of JFET. Some operational amplifiers, especially JFET operational amplifiers, exhibit this behavior. When production is expected to exceed some threshold of positivity, the exit opposite to the negative rail. If you plugged a JFET op in a real circuit amp, you will see this behavior. So, this may have to do with the op amp model you use. If this is not the behavior you expect (i.e. not what you observe in a benchtop configuration), my best advice is to substitute your op amp of simulation for a similar performance, but do not present the same reversal of output.

  Take a look at this page by Analog Devices. This phenomenon is described in the section titled "what other op amps features users need to know about?

  Hope that helps.

  I don't think that it is the problem of "phase inversion" described in paragraph 1 of the above-mentioned article.  I don't think that the 741 is a JFET or common mode entry is too negative.

  However, there don't seem to be compatible with the "more serious form of short" described in paragraph 2.  This problem occurs when the input exceeds the rail by ~0.6 V voltage, which could backfire on some internal diodes.  The page suggests that it would destroy a real op-amp.  In the simulation, operational amplifier would not be destroyed, but it could show behave erratically when wine > Vrail.

  Does make sense for someone else?  I'll try to remember to test this with a real operational amplifier next week.

• Newer model generator RTF for Word

  Hello
  
  Can someone post a link for newer model generator RTF to Word?
  
  Kind regards
  
  Kelly

  Link is here: [http://www.oracle.com/technology/software/products/publishing/index.html], take a look at, stock {labeled BI Publisher Desktop 10.1.3.4.1 for Windows (123 MB)}

  Thank you

  Tony Miller
  Webster, TX

• Simultaneous program with RTF/EXCEL output

  Hi all

  
  I updated java version 7. When I go to the simultaneous program with HTML/PDF output, is the opening.

  But when I display the output of the simultaneous program with RTF/EXCEL, it does not open. I think we have to put something in the Solution Explorer.

  I was able to open before the upgrade and java 6.

  Version of the EBS - 12.1.3

  DB 11.2.0.3

  OS - RHEL5 64 bit

  JRE - 7u25

  Please help me solve the problem.

  Thank you

  SAL

  Hi Sal.

  How do you set Internet Options ask confirmation for file downloads and download file?

  Octavio

• Problem of style with printed documentation

  I'm generating printed material in my project, RoboHelp HTML Word. Using some of the tips on the website of Peter Grange, I created my first night out by choosing the option '[none] - use styles CSS for the project' in the printed Documentation Wizard.
  
  The result was very good and I just had to make some changes to the styles in the Word document to get the styles to look as I wanted. Then, I saved the Word file as a template and import the model into my project.
  
  The next time that I generated the printed output, I had a problem of formatting with numbered lists. The indentation is not what I had in the model. I tried formatting in a paragraph and update the style of attachment, but not changes to all instances of the style numbered list. In the Word template, I used the same numbered list style that was in my aid project rather than a standard numbered list styles in Word by one of the suggestions in this forum.
  
  Any suggestions on getting the indentation for numbered lists correspond to what is in my template, without having to set each item in a list me? The main problem I find is that the indentation of each numbered list item gets changed to 0.04 (it is 0 in my model) and an additional tab is added. Also, while in my model the indent and the tab are both set to 0.22, when I generate printed documentation, there are two legs to 0.22 and 0.25, and the hanging indent is set to 0.25. In some cases, a tab gets the value 0.29!
  
  Thank you
  Alan

  Peter,

  Yes, you were right. Before the regeneration of the printed output, I left all of the Word styles the value '[no - style to use in project] ". RoboHelp then created new styles in the Word document with the prefixes "rh_. The list of the bullet and numbered list styles were in retreat and that I wanted them to be. I then took the path of least resistance, so to speak and adjusted other paragraph styles to align properly with the list styles.

  Thank you.

• How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

  How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

  This just started happening the last two days.  I tried to add the url to my list to activate in Internet Options, also to accept the list for windows firewall. I rebooted and restored.

  It is annoying when I can't access Web sites on my PC.  There is no control parenting, nor is it a reason to be since I'm 57 years old, single, live alone and have no children, and not to mention that this isn't a single adult site. This is an auction site.  The same thing happens on a site of sports too.

  Hello

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. what operating system is installed on the computer?

  2. what version of Internet Explore do you use?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Start Internet explorer with the mode without modules and check.

  Click Start, all programs, accessories, System Tools, and click Internet Explorer (No Add-ons).

  If the problem does not persist in Internet Explorer (No Add-ons), then it is one of the Add-ons at the origin of this problem. Please follow the steps below to locate the problem the weak module:

  a. restart IE normally.

  b. click on tools.

  c. click on Manage Add-ons.

  d. disable add-ons by clicking on them one at a time to highlight and then click Disable.

  e. reactivate modules one by one and check with what add-on, you get this error message.

  f. turn off the add-on at the origin of the problem.

  For your reference: http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  (For Windows Vista)

  Method 2: How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  Follow these recommended steps and after if you still experience the problem.

• vRealize 7 - NSX Automation deployments fail due to problems of certificate with vRealize Orchestrator

  Hello community,

  After you have installed the latest version of vRA, vRO, and NSX I run questions when you apply components that use components of the NSX. First of all: details of the version:

  -vRA: 7.0.0 (build 3292778)

  -vRO: 7.0.0.16989 (build 331003)

  -NSX: 6.2.1 (build 3300239)

  vRO plugin versions are delivered with the vRO version listed above with the exception of the plugin NSX, which has been updated to the latest version (1.0.3 published on 17.12.15).

  In the configured tenant vRO is configured as endpoint. I can check the data collection is running and working. I can see the plugin NSX for vRO runs the workflow 'create endpoint NSX' from time to time using the configured user of vRA VRO.

  In the configured tenant vRO is thus configured as server default for ASD vRO. Connection test is successful. When you save the config I'm prompted to approve the vRO certificate, which I confirm. Note that the thumbprint specified matches the footprint of the vRO certificate that I get during the visit of the vRO system on https://vro:8281. I am able to navigate the vRO vRA designer workflows, therefore: connection seems established.

  Within vRO the vRA COFFEE and plug-ins IAAS have been saved successfully. I am able to browse the inventory of plugin for both plugins.

  To solve the problem, I created a new unified plan within the design section of vRA with the following configuration:

  -Transport box: my area of transport configured NSX (checked: manual creation on this area using NSX works very well)

  -Routed res pol. Bridge: my reference for the dash cluster to use Pol

  -The only component dragged to canvas is a 'network and safety'-> 'On-Demand NAT Network' that uses a profile preset 1-to-many network as is "Parent network profile" without manual modification.

  -Note that, although there is a plan very simple example to illustrate the problem, it happens with any model that I have set up if any component is confgured requiring the NSX plugin for vRO.

  "Whenever I ask this plan, the request fails with the error message:" ","application [fa1e0689-0d06-4308-a914-e498c0d1fd99]: 404 not found "

  Looking in vCenter, NSX and vRO I can check that nothing is really trigged when you ask for the action plan.

  Consider the vRA /storage/log/vmware/vcac/catalina.log becomes very visible:

  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.isEndpointAlive:88 -
  vRealize Orchestrator endpoint with url [https://s00-vro.my.domain:8281/vco] is not alive. 
  Exception message:> [Host name 's00-vro.my.domain' does not match the certificate subject provided by the peer (CN=s00-vro.my.domain, OU=VMware, O=My Company, C=DE)]
  
  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.getFirstAliveEndpointByPriority:200
  - vRealize Orchestrator endpoint [https://s00-vro.my.domain:8281/vco] with priority 1 is not alive. Skipping.
  
  org.springframework.web.servlet.mvc.method.annotation.ExceptionHandlerExceptionResolv
  er.logException:189 - Handler execution resulted in exception: Endpoint not found. There are no vRealize Orchestrator endpoints that are alive.
  
  com.vmware.vcac.platform.service.rest.resolver.ApplicationExceptionHandler.handleHttpStatusCodeException:673 - 404 Not Found
  org.springframework.web.client.HttpClientErrorException: 404 Not Found
  ...
  ...
  ...
  
  

  Please note that I double checked the certificate. This is a self-signed certificate created using the 7.0 vRO new control panel, the one I get when you go to https://vro:8281. It is valid and the object (issed to CN) matches perfectly the hostname entered the ASD and endpoint configuration in the vRA. It is separable and time on all components of the server is in sync with the use NTP.

  Now, I even re-generated certificate and re-registered and rebooted all the components, but while I can see that the certificate has been updated all components I always get the same question.

  Never had this problem with the previous version of the NSX / vRA / vRO. I checked the documentation if nothing has changed here, but did not find what I'm doing wrong. Anythimg I'm missing here? Any bug?

  OK, this seems to be the issue. So put atleast to previous day since version ofvRO (cannot check if it's true for charges vRO 7 installs as well but it is probably) vRO 'control center' will generate certificates based SHA1 vRA love not for actions that use the endpoint in the vRA vRO. ASD seems to work without these problems.

  Sidenote: VRO upgraded installs will also come with SHA1 based CERT if they use a self-signed cert created by vRO. However: you would think that it is sufficient to recreate the cert using the control center. But it turns out it isn't, because it will generate a (new) based SHA1 cert.

  What I did to solve the problem:

  1. create a vRO SSH2 based certificate without the cert extensions, similar to the one that ships with built-in vRA vRO. I tend to use xCA for these jobs, but openSSL will do as well. The exact format required for the certificate of vRO is not documented, but I can make sure you need it like this: PEM certificate in key private and public including format PKCS #1, formatted as follows:

  -----BEGIN RSA PRIVATE KEY-----
  (Your private Key: your_vro_server.key)
  -----END RSA PRIVATE KEY-----
  -----BEGIN CERTIFICATE-----
  (Your primary certificate: your_vro_server.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your intermediate certificate: intermed.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your root certificate: root.crt)
  -----END CERTIFICATE-----
  

  I had problems when I used the key extensions so I would say you don't use and don't create a very basic cert without extensions V3, as indicated on the right of the image to my last post (ideally, you want to have a cert with the same properties as the cert is used by the device of integrated vRO vRA unless of course different CN) etc.).

  2. use the vRO control center located at https://your-externa-vro:8283 / vco-controlcenter / #/ and move to--> Orchestrator Server SSL certificate certificates. Use the action to import to import your PEM cert. It should tell you that you need to restart your device vRO. Then RESTART the device (for not just restart the service, this seems not be sufficient).

  3 al ' vRA remove the Endpoint vRO everywhere wherever it has been configured. Also, I removed the vRO to the ASD config just to make sure that nothings left.

  4 reboot the vRA power (IAAS can be left as what). I needed to do this because I have seen that the keystore at some point would keep beeing crushed by CERT vRA (?), I deleted it (AND I checked that they are deleted) reappears in the keystore after a while. After a reboot, the problem was gone, the keystore was clean.

  5. Add the configuration of endpoint and ASD vRO. Accept the certificate.

  6. the works.

  Therefore, while I have no more time to solve the problems more than I guess the problem is the SHA1 function certificate generated by the device of vRO. The internal unit is equipped with a SHA2 based cert that works and after that change the external device SHA1 cert in a basic cert SHA2 all works.

• Engineering problems the surrogate with Unique key primary key

  SDDM 3.3.0.747 with 2 problems (at least so far).  I hope that the problem comes from this recruit SDDM and I forgot a setting. PROBLEM 1 I don't want to start a religious debate on substitution vs natural keys but I'm having a problem correctly both the logic model of engineering.  I'm a rookie when it comes to SDDM but have many years of experience with the Designer. By default, only I wish I had a natural UID (UK) and a surrogate mother based on a primary key UID (PK) which is used for foreign keys.  The problem I have with engineering is I can successfully engineer the substitute PK, engineer of the FK with the PK, but cannot get the unique key to contain surrogate keys in the child table.  If I check the identification property in relationships, the PK columns and the UK are included in the child PK and the United Kingdom contains no columns. The installation program, I've defined two reference entities, PROBABILITY and GRAVITY with unique keys natural defined.  I also have a child entity RISK_ASSESMENT with links to entities of the PROBABILITY and SEVERITY and both have the "use surrogate keys:": check box selected.  The unique key of the entity RISK_ASSESMENT includes links to PROBILITY and GRAVITY.  None of the entities have a PK or replacement of the defined keys and they all have the checkbox "Create a surrogate key" checked.  In addition the following preferences are defined: Data Modeling/model/logic NO checked - use and the first Unique key as primary key value NOT checked - name - Keep under the name of the from attribute Checked - entity carrier to create controlled key - use surrogate PROBLEM 2 key relationship when the foreign key columns are engineered I want names have a prefix 'FK_"but they don't.  Models are defined as follows: Data Modeler/assignment of Standard/Templates Foreign Key name: FK_ {children} {parent} foreign key column: engineer FK_ {Ref column} relational model/General checked Options - translation name Marcus Bacon apply

  Once more, I designed without removing anything and still no FK to the United Kingdom of the child.

  There is a synchronization problem in DM 4.0 EA1. This will be fixed for the production version.

  Philippe

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• the site theme is problem with firefox, but not any problem of chrome with!

  the site theme is problem with firefox, but not any problem of chrome with!
  for ex: http://haftegy.ir
  How to fix?

  Wow sorry! IM update firefox to the latest version and my problem is solved.
  Thank you very much.

• I can not access to sites such as Youtube or truckcam.tv it seems that the problem may be with the most recent Adobe flash and firefox as browsers further

  Question
  I can't access to sites such as Youtube or truckcam.tv , seems, the problem may be with the last Adobe flash and firefox as other browsers work I reinstalled both, but without success, even on the two desktop using Vista and laptop on Windows 7

  See:

  • https://support.Mozilla.org/KB/Flash-113-crashes

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Problems of wireless with my Satellite A505

  Hello people,

  I have a Satellite A505 which uses a Realtek RTL8191SE wireless network card. Recently, I had connectivity problems with my home router. This configuration used to work perfectly, but recently, I had a problem where I won't be able to connect to my router wireless access point. Reset the adapter does not solve the problem, or don't restart.

  I found that my router reboot solves the problem, I am able to login after the reboot of the router. I have not had this problem on any of the other devices or laptops in my house and never had this problem until last month. I tried to do a factory reset on my router in order to ensure that some recent changes in our setup of the router were not to blame, but the problem persists even with a clean slate.

  Ideas for what to do?

  Thank you!

  Hello

  >... and never had this problem until the last month or more
  Do you use WLAN driver from Toshiba support page?
  I ask this question because I noticed that under Win7 driver for this wireless network card is offered as optional update. Maybe this update is installed, and now you have this problem.
  If possible, try to roll back OS a few weeks back and check if the problem persists.