Problem in Flex Builder user interface after installation of Flex 3

Similar Questions

• Failure of logon user interface after windows update

  After a recent windows update I get the following error.

  Winlogon.exe: The application or DLL c:\WINDOWS\system32\OBDC32.dll is not a valid windows image. Please check this against your installation diskette.

  After this window I get:

  User interface failure: could not load the DLL msgina.dll of logon user interface. Contact your system administrator to replace the DLL or restore the original DLL.

  The only option at this point is to restart that puts me in a vicious circle of the same mistake.

  I tried to login in safe mode by following the instructions in this article , but the same error messages.

  I use VMWare Fusion 2.0.8 and on OS X 10.5.8.

  Someone at - he had this problem and found a fix?

  Thank you!

  You will probably need to run a repair of Windows, the installation looks beat some key Windows components.

  KB.VMware.com/kb/1013846

• Missing elements of user interface after ui.dll "upgrade".

  I have a strange problem with installation on 64-bit Windows 8 LR5. After following the instructions on this page http://helpx.adobe.com/lightroom/kb/lightroom-5-crashes-editing-images.html missing elements of the user interface, the most obvious is the display of the grid, the film and the module selector.

  

  The photos are actually in the catalogue and can be seen in the Loupe, and then in the develop module.

  In the develop module, there are also a few missing pieces, as the histogram, the curve in the curve tool and the type of curve selector. The histogram shows on the library module.

  

  Returned ui.dll originally solves all problems.

  If someone has encountered this?

  'Hi,

  From the looks of it, you have a confrontation with the DLL, I can repeat what you see by renaming the old DLL to "ui.old.dll".

  From my experience with the DLL, make sure that you rename the old user interface. DLL for an extension that is NOT. DLL or. EXE, for example follow the instruction:

  10 rename ui.dll file in this folder to ui.dll.old, for a return upwards.

  Do not rename it as "old.ui.dll" or "ui.old.dll" as it will be loaded at startup.

  Don.

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• problems with disappearing/reappearing user interface components

  We are developing a Flex application for web environment in our society and have stumbled on a rather strange problem. Me and a college of mine have been scratching our heads for several days for this.

  We use navigator tab to switch between different custom components. Custom components all work as they should, but the problem sometimes occurs when you switch from one tab to another. The content of the tab disappears and so does the other tabs, apartment of one selected and the two buttons we are having above the tab navigator. Then the interesting part, all buttons and tabs reappear when I get my mouse on them, not all at once, but when I get my mouse on them. The text that is contained in the tab appears at the time where I change the tab in my browser and come back to enforcement tab setting tab browsers creationPolicy = "all" only sort of fixes the problem the buttons no longer disappear. This does not create a new kind of difficult problem, some of the features other tabs fires a little too early in a sense that they are not necessary at this time to fire, in fact they are not ment to be fired before selecting this particular tab in fact.

  I hope I wasn't too little clear explaining the problem. Does anyone have an idea what would cause the problem? Any help would be greatly appreciated. Thank you in advance.

  Maybe an invalidateDisplayList() call the browser to tab after a click will set the whiteness.

  Custom components, particularly those written in AS3 which draw and discount isn't like the rest of the Flex Framework seems to cause random white boxes in my experience.

• Problem with the redirection email Yahoo after installation of nine updates

  Original title: problem with transfer of emails after having installed new updates

  I installed the windows updates nine but a few days ago since then have had a problem with the redirection of emails coming into my inbox on my BT Yahoo mail account. When I get the Outbox until you find at least half of the time the "add recipients" does not work despite all the efforts, which means that I would put in manually email addresses (long and painful). My windows mail forwarding system seems to work OK. -Wood Marcus * address email is removed from the privacy *

  Hello

  1. What were the updates that have been installed on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  2. don't you configure e-mail account Yahoo BT in any e-mail client? Example: Outlook, Windows Mail.

  3. you use Internet Explorer to access BT Yahoo mail account?

  If you have configured the account BT Yahoo mail on the mail client, post of additional information to help you more away or well you could contact Yahoo Mail Support forums to help you best. Check out the following link.

  http://answers.Yahoo.com/dir/index?link=list&SID=396546091

• Problems with Hal.dll recognizing multicores after installation of the motherboard

  I'm new to these forums, so I don't know exactly where this issue will...

  So here's the problem: I just replaced my jacked up Intel motherboard with a new ASUS P5G41-M LX2/GB. Before, in my device manager, it looks like "ACPI Multiprocessor" or something along that line, but now, under computer, it just says: "Standard PC". In addition, the "processor" tab does not exist, disappeared somewhere in limbo to replace the motherboard. My taskmanager would simply say that there is a kernel, and not both (and don't ask me to click on the ' show one graph per CPU ", it does not work). When I check my Hal.dll file, instead of saying that Halmacpi.dll was original, I would say it was "hal.dll", the Standard PC. Same thing for the other knrl.exe files. I really don't want to wipe my HD with a system reinstall, because 1. I don't want to lose one of the gigantic piles of stuff, that I worked on the computer and 2. I lost my XP Professional (but has the home edition for some reason any) CD. If you guys need my characteristics:

  ASUS P5G41-M LX2/GB motherboard

  Intel Core 2 Duo E4300 1.8 GHZ

  Windows XP Professional

  NVIDIA GeForce G210 1 GB

  2.0 GB DDR2 RAM

  You have loaded all of the drivers that came with the new MB? Windows should be the CPU as being a multi-core, as soon as it recognizes the new chipset drivers.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• No TWAIN interface after installation of Epson Stylus CX3810

  OS: Windows 7 Professional 64-bit OEM

  Symptoms: no applet to the Panel, no source TWAIN TWAIN

  Hi rachid,.

  Printer Epson Twain interface are you referring?

  You can check the link from Epson support and try to install the latest version of Epson drivers\Software and check if it helps.

  Epson Stylus CX3810 all-in-One Printer

  You can also get in touch with Epson support for assistance.

  Hope the helps of information.

• Problems to make CF Page administrator after installation of the Developer Edition

  Finished installing FC 11 Developer Edition and cannot connect to the CF and the preinstalled Apache web server administrator. I get this message:

  Firefox can't establish a connection to server 127.0.0.1

  Tried these URLS:

  http://127.0.0.1/CFIDE/administrator/index.cfm

  http://localhost/CFIDE/administrator/index.cfm

  http://localhost:8500/CFIDE/administrator/index.cfm

  Am able to get a web page that says: 'It works' when I try to access to http://localhost

  Does anyone have advice?

  Rob

  It worked! I will continue to go and let you know if I hit more

  questions.

  Rob

  Monday, December 29, 2014 at 15:04, pay Anit [email protected]>

• Download NDK for Linux without user interface?

  I was looking to install the NDK on a linux server.

  However, the only download link that I find is the Momentics and the documentation told me to update the Momentics NDKs.

  The server has all of the user interface, if I have only my SSH interface.

  Where can I find the files I need to compile from the command line?

  seems I need user interface after all.
  I downloaded xming and implemented x 11 forwarding in putty, the SDK is now downloading from the server.

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• User interface failure after MS windows update

  Just downloaded a new MS update 12/01/2011. He propted me to reboot, so I did and it seemed to be boot normally, but as soon as she was about to the login screen it came with an error message.

  "The application or DLL C:\Windows\system32\ODBC32.dll is not a valid windows image. Please check against your installation diskette. »

  With my only option is to click ok and get stuck in the same loop: "reboot, the error message, click ok, restart again at the beginning."

  I have a Linksys wireless device I've been using since I first got the computer 6 years ago and never had a problem before with it go to this special login screen instead of the usual login screen for Windows XP Professional.

  When I try to boot into 'safe mode', the same message appears, but if I close the message instead of click ok, another message appears: "the GT Gina.dll failed to load user interface dll. Please contact your adminastrator system (I'm admin) to replace the dll or the original dll... »

  Can someone help me with this problem, what can I do? I have inportant information on my 'C' drive then a complete reinstall of my OS is not an option, and I dare to talk about the irony that I was going to make a backup of that same information today, as I do once or twice a month.

  PLEASE HELP ME, SOMEONE, HELP!

  Since most of the people do not have a genuine XP bootable installation CD, think they might have a genuine XP bootable installation CD, not sure what type of CD that they have, or have only recovery type CD that came with their system.  To remove all doubt, I have instructions to make a CD bootable Recovery Console.

  If you have a SATA drive, sometimes the CD Recovery Console will not recognize your hard drive without some settings in the BIOS, but I would start with the bootable XP Recovery Console CD do you and see how it goes.  With SATA drives, sometimes it's beautiful, it is sometimes annoying.

  I also have in the next post will give you the instructions to create a bootable Hiren CD.  There a windowsy Office look and feel which is less intimidating than the Recovery Console command line interface.  Hiren does not seem that this issue be SATA (at least not for me) and you can always make your file replacement.

  I recommend yo do the CD and try them in a system that works just to see if they start very well, you know.  You do not have to 'do' anything, make sure that it starts, and you can navigate and see some files, then exit.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Speech recognition - recognition language is not language User Interface problem

  I want to get Windows 7 speech recognition to work with British English, but I get an error after the training, that the language of the speech recognition is does not match the language of the user interface. I got the thing defined in the locale UK and speech recognition in British English. Several people have suggested:

  • Change regional settings, restart, change back again, reboot. Does not...
  • Turning off the box that says look at my documents. Does not solve.
  • make a Windows 7 reinstall. Can't do like no Windows 7 no install disc came with the PC.

  Can someone help me solve this problem? Where is the language of the User Interface set? Would - this something to do with Office 2010?

  There is anecdotal evidence that the use of like CCleaner registry cleaners can cause this problem.

  Speech recognition Windows 7 CCleaner
  http://Forum.Piriform.com/index.php?showtopic=21936

  Speech recognition could not start because the configuration of the language is not supported. The recognizer language must match the language of the user interface.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5ba2cf1b-E97D-46d7-924D-b14007581786

  Have you contacted the manufacturer of your machine to see what the repair and the machine has recovery options?  Maybe he has a hidden recovery that is quite common nowadays for the OEM partition?  This should be mentioned in the manual or on their Web site.

• I did an update for LR6.  After installation, I can't open LR6.  A message indicates the user permissions issues.

  I did an update for LR6.  After installation, I can't open LR6.  A message indicates the user permissions issues.

  See answer #7 in this thread: Re: update on CC (for PS, LR and bridge) online and met a permissions problem with LR on three dossiers?