Missing elements of user interface after ui.dll "upgrade".

Similar Questions

• Failure of logon user interface after windows update

  After a recent windows update I get the following error.

  Winlogon.exe: The application or DLL c:\WINDOWS\system32\OBDC32.dll is not a valid windows image. Please check this against your installation diskette.

  After this window I get:

  User interface failure: could not load the DLL msgina.dll of logon user interface. Contact your system administrator to replace the DLL or restore the original DLL.

  The only option at this point is to restart that puts me in a vicious circle of the same mistake.

  I tried to login in safe mode by following the instructions in this article , but the same error messages.

  I use VMWare Fusion 2.0.8 and on OS X 10.5.8.

  Someone at - he had this problem and found a fix?

  Thank you!

  You will probably need to run a repair of Windows, the installation looks beat some key Windows components.

  KB.VMware.com/kb/1013846

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Problem in Flex Builder user interface after installation of Flex 3

  So, here's an interesting question. And my apologies in advance if it has been reported before. But I spent the greater part of two days, installation / uninstallation / cleaning / resettlement. However, still having the problem with Flex Builder 3:
  
  After the launch of Flex Builder 3, I create a new project and "right click" on the name of the project in the browser in Flex in order to launch the 'Properties' dialog box. " Tab property page resource, various fields are truncated and drop-down list boxes are all jacked. In fact, under the Flex Build Path tab, it is completely empty. Basically, throughout the Flex Builder IDE, I have various missing fields or bizarre behavior.
  
  Then... at this point, I've pretty much uninstalled, uninstalled the JRE (think this is related to java), cleaned the system registry, uninstalled flash players, edited the flexbuilder.ini with one "-clean", installed updates for Vista (so now this system is on SP1) essentially... I have everything humanly possible short of formatting the system again.
  
  Running Windows Vista x 64; 8 GB of RAM; NVidia 8800 video card.
  
  To make sure that I wasn't completely lose my mind... I installed on a portable system and everything ran like a charm. Thus, after traveling through these forums and Google the issue to death... I can't find the answer.
  
  If anyone can help me it would be much appreciated!

  You're probably also using the logitech SetPoint on Vista x 64 drivers, who have a known conflict with Eclipse 3.3.

  (The 'solution' is one) to get rid of the drivers (but I love my DiNovo Edge keyboard!) or Eclipse use b) 3.4M4 and the plugin. However, it is not entirely taken in charge, so they sometimes issues, especially with design mode, so generally I use FB3 and switch and then run away when I need to change a setting (not optimal, I know, but not as frequent as that, once a day on average for me). Or just edit the parameters with a text editor.

  Or (c) perform virtualization VMWARE etc. and do it all in x 86.

  (Mise en garde, je n'ai jamais essayé un) personally, but have read that it works.)

• Use QObject as a property in the user interface element

  I want to store an instance of QObject in an element of user interface for later use. My attempt to use a type of QtObject failed as follows:

  model var = retrieveModel() / / get instance of method C++ Q_INVOKABLE QObject

  containerInstance.model = modΦle

  ...

  {Of container

  ID: containerInstance

  model QtObject properties.<-- attempt="" to="" store="" the="" qobject="">

  {Label

  text: model.name

  onXYZ: {}

  Model of QObject here use

  }

  }
  }

  But apparently QtObject differs from QObject:

  Asset: / / / test. QML:51: error: could not assign QObject * to bb::cascades:QmlQObject *.

  Does anyone have an idea to store a QObject as a property of a UI element? My other option is to store the model instance of QObject as a global variable in "pints", but this isn't a nice solution.

  You must expose the object that you want to use in C++ and QML.

  Read this to understand how it's done...

  http://developer.BlackBerry.com/native/documentation/Cascades/dev/integrating_cpp_qml/

• Download NDK for Linux without user interface?

  I was looking to install the NDK on a linux server.

  However, the only download link that I find is the Momentics and the documentation told me to update the Momentics NDKs.

  The server has all of the user interface, if I have only my SSH interface.

  Where can I find the files I need to compile from the command line?

  seems I need user interface after all.
  I downloaded xming and implemented x 11 forwarding in putty, the SDK is now downloading from the server.

• Panel/container for the user interface components?

  Forgive my ignorance, I'm sure this is a stupid question with a simple answer, but I am new to both Adobe dev and QNX.

  Is there anything for an Air application on the Playbook that acts as a container for the elements of user interface - similar to, say, the StackPanel in Silverlight? My preliminary research on Actionscript itself says not, but so far, the QNX components have been the saving grace of this platform, so I hope that there is a component of QNX UI that I don't know

  Thank you.

  Hey deeko,.

  Yes, there is a class called (ironically) container that can help you with what you want. Here is the Doc of the API and information with examples for this:

  http://www.BlackBerry.com/developers/docs/airapi/1.0.0/QNX/UI/core/container.html

  im going to assume that you have not yet watched on the COMPRESSED AIR SDK library yet, so here is the link in case you were curious about other things you need in the future:

  http://www.BlackBerry.com/developers/docs/airapi/1.0.0/index.html

  hope that helps. Good luck!

• Commissioning user of failing AD after AD Connector upgrade

  Hello
  
  I am facing problem while AD User Configuration after that I upgraded the connector 9.1.1.5 to 9.1.1.7 AD, upgradtion successful message was shown and when I tried to configure a user to AD it shows CreateUser task is rejected and after the indicated response is
  
  Answer: com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks.createADorADAMUser (java.lang.String, bool
  Description of the response: received unknown response.
  
  Error details
  Implementation status of the task... 'com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks.createADorADAMUser (java.lang.String, bool' does not match a known response Code. With the help of 'UNKNOWN '.
  
  Above response means that its unable to find CreateAD which creates the user in the AD?
  
  Thank you
  Rahul
  
  Published by: Rahul Shah on June 12, 2012 21:52

  Rahul,
  It seems that IOM always points on old pots.
  You have restarted the server with cache purge.

  If it still does not work, delete the old pot and replace by new ones.
  purge the cache, and then restart the server.

  -Kuldeep

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• The logon User Interface DLL Masgina.dll failed to load?

  Hello

  My name is Shelley, I really honestly do nothing about computers and my computer at home, which is a dell with windows xp pro.   was working fine, then 1 morning I rose and ithad a blue screen with the message about it.

  The logon User Interface DLL msgina.dll failed to load.  Contact your system administrator to replace the DLL or restore the original DLL.         then she had a reset button to push.  When I pressed the button, the display cover Dell and then he showed the sreen of coverage of Microsoft Windows XP, then he can go right the message telling me that. The User Interface DLL failed.

  Now, my computer has been sitting there for 2 weeks, and no one can use it.  Now, I'm on my cell phone the school for 17 years.

  What should I take my computer in a store or is - something simple, maybe, I can do myself?

  OH and if you know, the computer is at my daughters school, they have gave to her, because she had really great classes and she's in schools IB program, so they gave him a computer to have at home, it is set up for academic use, I know not whether that counts or not.  She got a new laptop for Christmas. Other people in the House are now using the computer to play games and watch videos from YouTube.

  Can someone help me?   Thank you, Shelley

  Hello

  ·        You're able to boot in safe mode?

  ·        Remember to make changes to the system?

  Method 1:

  If you are able to boot into safe mode then I suggest to do a system restore to a previous point when the system worked very well and check.

  Step 1:

  I suggest to start in safe mode and check if the problem persists.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2:

  I suggest you do a system restore and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  I suggest you to consult the article below.

  "Logon user DLL Msgina.dll failed to load Interface" error after you have installed the MS04-003 security update

  http://support.Microsoft.com/kb/836683

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• User interface failure after MS windows update

  Just downloaded a new MS update 12/01/2011. He propted me to reboot, so I did and it seemed to be boot normally, but as soon as she was about to the login screen it came with an error message.

  "The application or DLL C:\Windows\system32\ODBC32.dll is not a valid windows image. Please check against your installation diskette. »

  With my only option is to click ok and get stuck in the same loop: "reboot, the error message, click ok, restart again at the beginning."

  I have a Linksys wireless device I've been using since I first got the computer 6 years ago and never had a problem before with it go to this special login screen instead of the usual login screen for Windows XP Professional.

  When I try to boot into 'safe mode', the same message appears, but if I close the message instead of click ok, another message appears: "the GT Gina.dll failed to load user interface dll. Please contact your adminastrator system (I'm admin) to replace the dll or the original dll... »

  Can someone help me with this problem, what can I do? I have inportant information on my 'C' drive then a complete reinstall of my OS is not an option, and I dare to talk about the irony that I was going to make a backup of that same information today, as I do once or twice a month.

  PLEASE HELP ME, SOMEONE, HELP!

  Since most of the people do not have a genuine XP bootable installation CD, think they might have a genuine XP bootable installation CD, not sure what type of CD that they have, or have only recovery type CD that came with their system.  To remove all doubt, I have instructions to make a CD bootable Recovery Console.

  If you have a SATA drive, sometimes the CD Recovery Console will not recognize your hard drive without some settings in the BIOS, but I would start with the bootable XP Recovery Console CD do you and see how it goes.  With SATA drives, sometimes it's beautiful, it is sometimes annoying.

  I also have in the next post will give you the instructions to create a bootable Hiren CD.  There a windowsy Office look and feel which is less intimidating than the Recovery Console command line interface.  Hiren does not seem that this issue be SATA (at least not for me) and you can always make your file replacement.

  I recommend yo do the CD and try them in a system that works just to see if they start very well, you know.  You do not have to 'do' anything, make sure that it starts, and you can navigate and see some files, then exit.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Anyway is to clear all the elements of native user interface of BB?

  Hello

  As far as I know, we can get the android user interface elements by sending a "DUMP" command to port 4399 (http://blog.csdn.net/roger_ge/archive/2010/04/28/5538266.aspx), is it possible to similor to BB?

  Thank you!

  None

• User interface changes after an upgrade of the DBMS/Apex

  My Organization recently migrated to Oracle 11 g 12 c and Apex 3.1.2 to 4.2.5.00.08 when we moved to a new server.  There is an old Apex application of 6 years who now has the following when open to 42.0 Firefox:

  1. the page appears with the right pair of blue no white background.

  2. the tabs also have a background white, but taken sandwiched between 2 small images at the beginning and the end of the tab.

  3. the same white background is in all regions; That is to say, none of the regions have the correct background color that is there on the old server.  And the bottom of buttions is also white, so they all appear as text with a small image at the beginning and at the end, just like the tabs.

  This application uses the blue and Tan - theme 2, which contains a custom page template that is based on 'a level Tabs '.   Header section of this model makes reference to theme_3_1_GNT.css, which is a modification to a built-in css css this body tag contains a reference to the required blue background color: background-color: #003399 and I've confirmed that this css is in the correct path on the new server.   The models used for the regions of the page are: region between square brackets, forms area, Navigation area and region reports.

  The pages also contain a jpg image at the top containing the name of the application, which displays correctly.  This image was imported into the application itself.

  The application seems to work OK except for these user interface problems.

  So if the model is the same as on the old server and the css is the same, what is causing this problem?

  I suspect that the solution is simple and some of the problems may have to do with how the game of the tab has been implemented, but I have not used this tool in so many years that I can not find the cause.

  If I missed some piece of information you need to resolve this, let me know.

  Thank you.

  The custom theme stylesheet is (obviously) not found at https://apex.oracle.com/i/themes/theme_2/theme_3_1_GNT.css

  Please download this as a static enforcement on apex.oracle.com file.

  As the appearance of the page with this lack of resources is exactly as you described initially, I suspect strongly that independently have "confirmed that this css is in the correct path on the new server" that it is not loaded. What browser do you use? Use its tools of web inspector to check on the status of the application of the style sheet.