Problem in the use of html in ADF

Similar Questions

• I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  Hi Shubham,

  You receive an error message when you try to use the Apps in Windows 8?

  Exactly how have you connected to the computer (Microsoft Account or Local account)?

  follow these steps to solve the app suggested you nuisance.

  Method 1:

  Run applications troubleshooting

  I suggest you to download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 3:

  I suggest that you check the proxy settings because if you use the Proxy Server, then the Apps in Windows 8 will not work.

   

  a. click on thegear box in the upper right corner in Internet Explorer.

  b. click onTools and then click Internet Options.

  c. click on theConnections tab, and then click LAN settings.

  d. Uncheckuse a proxy server for your LAN .

  e. clickOk.

  Hope the helps of information provided.

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Problem with the use of MID/LEFT functions

  I have a problem, see the point of these functions if (as seems to be the case) they will not allow another cell to be referenced.

  I want to do a SUMIFS with match being the first four characters of another cell data. I can't find any way to do it without manually copying the first four characters in another cell.

  If I use only LEFT like this:

  LEFT ('ABCD', 3) to derive 'ABC '.

  so why would just enter ABC in the first place? But that's what show examples and any attempt to do what I really want

  that is LEFT (F19: 3)

  causes a syntax error.

  I believe that I'm missing something really stupid, but I'm darn if I can see it.

  Hi jon,

  LEFT (F19: 3)

  causes a syntax error.

  Try a comma in place of the colon

  

  = LEFT(B2,3)

  It's your area used for the decimal point. If you use the comma for decimals, use a semicolon in the formula, = LEFT(B2;3)

  Kind regards

  Ian.

• I have a problem in the use of 'DAQassistant '.

  Hello world. I am a new learner to labview and China. When I use labview 2014 and DAQassistant with advantech USB4750, it will display ´error-536805376· "¢ Euou ToErrorCluster.vi ' and 'Get a unique temporary file name.' I reinstalled times serval labview and win7, but it still has the same problem (initially, I work well., but finally it did not work sorry for my english.and happy Chinese new year to all.

  a version of this tool also have problem then try using a different version of the

• Help, please! Problem in the use of http to call the url?

  Hello

  I develop application for Blackberry 8830, which is the cdma device. I want to develop the application that uses the http protocol to call url and gets the response. To use http everything I read there about 5-6 ways. But the only one that fits my needs is direct TCP. But my service provider in India i.e. Auntie Indidcom says that there can be no adjustments to the AFN for CDMA phones. What should I do now. I don't really know if that's the only problem.  I have this thread

  Different ways to connect with Http.

  There are six ways mentioned below: -.

  1 blackberry Enterprise Server with Blackberry MDS - I have Blackberry Enterprise server, so this is not possible.

  2. blackberry Internet Service - for this, the Alliance with the RIM so still no thuought on this subject.

  3 order TCP - do not get the APN settings

  4 WiFi network - I'm not network Wi - Fi is also to the equation.

  5. WAP Gateway - not looked into this yet.

  The only way I thought direct TCP, but it requires settings APN, but the message that I received from the people of Auntie, it's that the APN settings is supported for GSM based phones and not for CDMA phones. So is it possible, if yes, then please let me know, its urgency.

  Here is the code that I use for the connection.

  HttpConnection httpConnection = null;
              DataInputStream dis = null;
              DataOutputStream dos = null;
              url = "http://mailonphone.com:8180/automaticlicensing/LicensingServlet?" +
                    "UserName=ilesh&Password=ilesh123&SiteCode=012345678901234567890&" +
                    "ScratchCard=05533978;deviceside=true";
              System.out.println("URL=>" + url);
              try
              {
                  httpConnection = (HttpConnection)Connector.open(url, Connector.READ_WRITE);
                  httpConnection.setRequestMethod(HttpConnection.POST);
                  InputStream istrm = httpConnection.openInputStream();
                  String resMsg = httpConnection.getResponseMessage();
                  System.out.println("REsponse Message=" + resMsg);
                  int length = (int)httpConnection.getLength();
                  String str;
                  if (length != -1)
                  {
                      byte servletData[] = new byte[length];
                      istrm.read(servletData);
                      str = new String(servletData);
                  }
                  else  // Length not available...
                  {
                      ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
                      int ch;
                      while ((ch = istrm.read()) != -1)
                          bStrm.write(ch);
                      str = new String(bStrm.toByteArray());
                      bStrm.close();
                  }
                  System.out.println("Registeration Key=>"+str);
                  int in=str.indexOf("");
                  int en=str.indexOf("");
                  key=str.substring(in+6,en);
                  key=key.trim();
                  System.out.println("KEy="+key);
              }
              catch(Exception ex)
              {
                  System.out.println("Error while calling url");
                  key = "In catch while calling url";
                  //sendMenuItem.setText("Message not send");
              }
          }
  

  If there is a problem in the code then let me know also. I could not test this even on the MDS do not work on simulator emulator. Look into that, but if its related to another question please let me know.

  Thank you & best regards

  Sunil

  The exception it throws in wrestling, will give you an idea about the problem.  I suspect something is wrong with your data, for example, you have specified HttpConnection.POST, but you provide no post data, so I think that you really wanted to say HttpConnection.GET.

  WAP 2.0 does not work on the Simulator.

  I recommend that you get your code work using the Simulator (i.e. ";) deviceside = true') until you are exposed to problems trying to connect on a real device.

• Question about the use of SortableModel with ADF Table

  12.1.3 jdev

  I create a SortableModel containing a list of my QueryRetrieverResultRow object.

  QueryRetrieverResultRow object has a map of QueryRetrieverResultColumn object with the key of the QueryRetrieverColumnMetaData object.

  I am capable of sortablemodel is displayed correctly.

  My problem is the sort by column. I don't know if my sortable model is sortable. I don't know what I should use for sortProperty for my column.

  When I click on the up/down arrow on my column, I get this error. "Shipping ID" corresponds to the column label, I clicked.

  < 9 October 2014 12:37:12 PM PDT > < WARNING > < oracle.adfinternal.view.faces.context.RichExceptionHandler > < BEA-000000 > < ADF_FACES - 60098:Faces life cycle receives exceptions that are unhandled in phase 5 of INVOKE_APPLICATION

  javax.el.PropertyNotFoundException: the class 'glog.fusion.common.model.QueryRetrieverResultRow' has no property 'ID expedition ".

  at javax.el.BeanELResolver.getBeanProperty(BeanELResolver.java:723)

  at javax.el.BeanELResolver.getValue(BeanELResolver.java:351)

  at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)

  at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)

  at org.apache.myfaces.trinidad.model.SortableModel.evaluateProperty(SortableModel.java:262)

  in org.apache.myfaces.trinidad.model.SortableModel.access$ 100 (SortableModel.java:50)

  to org.apache.myfaces.trinidad.model.SortableModel$ Comp.compare (SortableModel.java:558)

  to org.apache.myfaces.trinidad.model.SortableModel$ Comp.compare (SortableModel.java:516)

  to org.apache.myfaces.trinidad.model.SortableModel$ Inverter.compare (SortableModel.java:630)

  at java.util.TimSort.countRunAndMakeAscending(TimSort.java:324)

  at java.util.TimSort.sort(TimSort.java:189)

  at java.util.TimSort.sort(TimSort.java:173)

  at java.util.Arrays.sort(Arrays.java:659)

  at java.util.Collections.sort(Collections.java:217)

  at org.apache.myfaces.trinidad.model.SortableModel._sort(SortableModel.java:439)

  at org.apache.myfaces.trinidad.model.SortableModel.setSortCriteria(SortableModel.java:299)

  My jsf code is like that. viewScope.FinderBean.resultModel is a SortableModel.

  < af:table var = 'row' varStatus = "rowInd" rowBandingInterval = "0" id = "t3".

  value = "#{viewScope.FinderBean.resultModel} '"

  rowSelection Binding = "#{viewScope.FinderBean.dynamicSearchResultTable}" = "multiple" "

  partialTriggers =': b2 ">"

  < af:forEach items = "#{viewScope.FinderBean.searchResultColumnMetaDataList}" = "colMetaData" var "

  varStatus = "ind" >

  < af:column sortable = "true" sortProperty = "#{colMetaData.label}" = "no style" rowHeader "

  "headerText =" #{colMetaData.label} "id =" c# {ind.index} "width =" #{colMetaData.width} "rendering =" #{not colMetaData.adfHidden} ">" "

  < af:activeOutputText value = "#{row.searchResultColumns [colMetaData]}" id = "aot1" / > "

  < / af:column >

  < / af:forEach >

  < / af:table >

  Thank you.

  Michelle

  I end up creating my own SortableModel the same class by changing org.apache.myfaces.trinidad.model.SorableModel to implement comparator code to meet my needs.

  And in my jsff ManagedBean code, build my own SortableModel and page jsff, sortProperty attribute to use to pass sorting information.

  Now, I can click on the arrow to sort the columns up and down.

• problem with the use of the model

  Hello

  I use Photoshop CC and all the time I have a problem with the help of veneer of reason. In fact, I can't use any template, because when I opened the window of boss, there is always this same situation-> window does not open properly /It is the visible part of the window and when I pressed on it do not bosses see / so I can't use any model - printscreen below :

  

  How can I solve this problem?

  Try resetting your preferences.

• Problem with the use of the lightbox in combination with buttons on the Master slide

  I want to use one have a Walker of popup layer (with content), the user clicks a button on the slide.  The user can close with a button which also appears Walker that the lightbox appears.

  The lightbox layer covers the complete breech the user should click the button close before the next slide can be visited. Everything works fine

  Problem:

  Then I used and prevoious buttons on the slide master and although the layer seems to be on the top of the next and previous buttons, they stil working.

  How can I prevent the buttons on the master slide to work Walker watch the light table?

  Vico

  Each interactive object remains active even if it is covered by a non-interactive object.

  More information on the use of the shape of the buttons, either model of slides or time during the rest of the project: http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6

  ATTENTION: during time during the rest of the project, to make visible everywhere normally you put on top. But in this case, which means they'll be on top of the viewers. I did pass on the viewers once, maybe I should write in a blog.

  Lilybiri

• Problem in the use of JSONDATAACCESS for parsing json getting as the server Http response.

  Hey Hi,

  I was tired this solution but get a problem. The problem is when I am trying to build my project it gives an error stating that ' expected ';' before ' ja ' when I declare JsonDataAccess.

  Here is my code snippet:

  JsonDataAccess ja;
  QString response;
  If (response-> error() == QNetworkReply::NoError) {}
  const int available = response-> bytesAvailable();
  If (available > 0) {}
  answer = QString::fromUtf8 (response-> readAll());
  qDebug()< "tag="" name="" is="" ::=""><>
  QVariant jsonva = ja.loadFromBuffer (response);

  }

  even after the addition of the LIBS +=-lbbdata in the .pro file I get no success here.

  Help, please

  Concerning

  Don't forget to:

• problem on the flow of tasks of adf and dynamic region

  JDeveloper 11.1.1.5
  
  I created a page jspx for making fun of the home page.
  
  In the facet of the beginning, there are 2 Ref order link in the region (for the 2 workflow)
  In the facet of the Center, there is a dynamic region. Once you click on the order link, the region will be changed.
  
  The problem is:
  
  the workflow has 3 displays (View1-> 2-> the View3), if I run mode 2, when I click on the link even in the facet of the beginning, it does not refer to the View1.
  
  I want the page back to View1 when I click the link, how can I apply?

  Hello

  You must reload the region to start again. To do this, you can assign to the refreshCondition for connection of the region, in such a way that when it is resolved to true, the region will be reset. No doubt, you can add a parameter to the region and set its value through setActionListener for the click on the link.

  Check this: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/taskflows_regions.htm#CHDEIFBB

  Arun-

• Problem with the use of the ADF libraries

  JHeadstart version: version 11.1.1.5.27

  JDeveloper version: Studio Edition Version 11.1.1.7.0

  Scenario of

  I'm trying to build an application using ADF libraries like below:

  Common code - extension of framework classes

  CommonUI - LOV hides, etc...

  Common model - ADFBC all entity objects

  Several subsystems (view controller 'helper' projects)

  Main view controller project

  I have created libraries according to the guide of FMW and have imported correctly into the relevant model projects and view controller.  In JDeveloper, I can see the libraries OK and able to build my screens without any problem using JHeadstart.  All of the subsystems are managed independently, i.e. I used JAG to create my application and can run the autonomous subsystems.  The problem comes from the main view controller project.  I have imported successfully all libraries in the project of main view controller and you can see all the controls data from libraries in the navigation Application in JDeveloper.  According to the JHeadstart user guide, I imported the NLS library by beams and have modified the JHeadstartApplicationDefinition.xml file to include my libraries (all names and paths are 100% correct).  Now when I run the JAG, it removes all the ServiceDefinitionRef I added to my library.  When I run the application crashes and JDeveloper reports the following error:

  "oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.ConfigException, msg = Houston-33005: Configuration DgmUC003ServiceLocal cannot be found."

  "Caused by: oracle.jbo.ConfigException: ADFContext Houston-29114 is not configured to process this exception messages." Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-33005. Error messages settings are {0 = DgmUC003ServiceLocal} ".

  DgmUC003ServiceLocal is one of my libraries.

  Can anyone help.

  I tried many things to fix this, but cannot find an answer.

  Interestingly, I once managed to recognize a library (I removed all but one subsystem libraries) and it worked.  When you use the JAG, it not to overwrite my amendment to the JHeadstartApplicationDefinition.xml of the file but when I added a library more he still replaced my amendment and gave the above error for the new library.

  It was the JHeadstartApplicationDefinition.xml file before execution of JAG:

  < ServiceDefinitionRef location = "MasterServiceServiceDefinition.xml" name = "MasterService" / > "

  "< Any ServiceDefinitionRef ="true"name ="UC003Service"location ="... /... /.. /DgmUC003/UC003View/properties/DgmUC003ServiceServiceDefinition.xml"/ >

  "< Any ServiceDefinitionRef ="true"name ="sdService"location ="... /... /.. /SD/sdView/properties/sdServiceServiceDefinition.xml"/ >

  That's what it was after completing JAG:

  < ServiceDefinitionRef location = "MasterServiceServiceDefinition.xml" name = "MasterService" / > "

  "< Any ServiceDefinitionRef ="true"name ="UC003Service"location ="... /... /.. /DgmUC003/UC003View/properties/DgmUC003ServiceServiceDefinition.xml"/ >

  He removed the 2nd entry of library?, wouldn't not and gives the following error:

  "oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.ConfigException, msg = Houston-33005: Configuration sdServiceLocal cannot be found."

  It's very frustrating, I followed all the instructions to the letter.  I would not expect a very simple thing like that does not work.  Any help, greatly appreciated pointers.

  Thank you Trevor.

  Hi Paul,.

  My apologies for not updating this thread earlier.

  The good news is that it has been resolved, the issue seems to be with JDeveloper and not JHeadstart (or maybe just a combination of the two).  That's what I do:

  1. Edit the file JHeadstartApplicationDefinition.xml
  2. Reconstruction/compile the project (in JDeveloper which is Alt - F9)
  3. Do a "save everything" (belt and suspenders, probably not necessary as reconstruction not save)
  4. Output JDeveloper (close, file-> exit)
  5. Restart JDeveloper
  6. Run the JAG (the new library names entered in step 1 are NOT replaced)

  This workflow has worked 100% flawless, I don't know what closure JDeveloper is but it works.

  I also now always close JDeveloper after importation of new libraries in my main view controller project because I think it's also a question, perhaps all related.

  I hope it works for you.

  Trevor

• problem in the use of Web service in my App ADF

  Hi, OTN
  
  I used this tutorial http://www.oracle.com/technetwork/testcontent/wsdc-085537.html to have a webservice in my ADF Application that returns as weather application.i used Jdeveloper 11 g 11.1.1.3.0. by following this tutorial that I could get the weather Info.but the first time I run my page or the first time I press the button getWeatherBy name after writing to the square there is an error message as follows
  
  System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Exception: error occurred when get webservices record---> System.Data.SqlClient.SqlException: procedure or function 'GetLatByPlace' expects the parameter '@ZipcodeName', which was not provided. at System.Data.SqlClient.SqlConnection.OnError (SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError (SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning () at System.Data.SqlClient.TdsParser.Run (RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData () at System.Data.SqlClient.SqlDataReader.get_MetaData () at System.Data.SqlClient.SqlCommand.FinishExecuteReader (SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds (CommandBehavior cmdBehavior, Boolean async, runBehavior RunBehavior, Boolean returnStream) to System.Data.SqlClient.SqlCommand.RunExecuteReader (cmdBehavior CommandBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader (RunBehavior runBehavior, CommandBehavior cmdBehavior, Boolean returnStream, method String) at System.Data.SqlClient.SqlCommand.ExecuteReader (CommandBehavior behavior, method String) at System.Data.SqlClient.SqlCommand.ExecuteReader (CommandBehavior behavior) at WeatherService.WeatherForecast.GetLatLonDataByPlaceName (String PlaceName) - end of the stack trace of inner exception - to WeatherService.WeatherForecast.GetLatLonDataByPlaceName (String PlaceName) at WeatherService.WeatherForecast.GetWeatherByPlaceName (String PlaceName) - end of inner exception stack trac
  
  When I press ok for this error Message.I can write the name of the place and had Info weather, so how can we stop this error messages that appear on each first time user call the weather page?
  
  Note: in the tutorial, I noticed that he has explained that there is an Error Message will appear (on the error window click OK.)
  
  Published by: Miar on 13 October 2010 06:03

  The scenario of the tutorial indeed translates this strange behavior.

  Note, however, that if you create a new page where you first drag the GetWeatherByZipCodeResults as a form, then drag the WeatherData in the form of a table and set the condition of all executables refresh to #{bindings. {ZipCode.inputValue not null}-page behaves as expected and only communicates with the Web service that there is a value in place.

• Qosmio G40 - problem with the use of 100% of the CPU

  In recent weeks I have problem like describbed here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126670𞻎

  Almost the same thing - my computer starts and works ok, but from time to time is frozen by Symantec Service Framwork and all other descriptions are the same.

  "After having been inactive during these seconds, the cooling fan will start to operate at maximum power, creating a huge noise, that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs." Force a reboot is all what I can do. »

  Almost all accidents that this question was by NIS2008, but also Vista explorer.exe and fingerprinttray service or the service of the Index process.

  I received a notice from the team of NIS that I get to use the new NIS09, and for sure that my machine is damaged - check it out here http://community.norton.com/norton/board/message?board.id=nis_feedback&message.id=6964&quer y.id = 22439 #M6964

  I called the Service, which has changed the ATV and CPU - I changed to NIS09 after, a few weeks was good, but now the problem back - in the last two weeks twice. (I observe that starts about 5 minutes after download of updates to NIS (I know cos NIS 09 indicator of that time).)

  One change - Vista is able to kill that process damaged (Admins have no right to do), starts the process of WeAreFault, which sends information on crash for MS - after about 15 min computer starts to work properly without reboot... so I think that a problem is somwhere on the line between Toshiba and Norton, cos repair also change in behaviour of the machine - is now using work not CPU around 20% - before was 50 to 70% and 100% of crash. Norton is also, but must for this.

  Does anyone have a conclusion?

  Generally, I don't like Norton because he needs as many resources and make the laptop lazy. On the net, you can find very good alternative applications.
  Have you tested how the laptop works after removing the NIS?

• Problems in the use of Ivi driver ke230y in 'IviDCPwr measure [MSR] .vi.

  Hi all

  I have a problem in using pilot IVI (ke230y) to control power electric keithley2303 with LABVIEW 2013.

  After I booted and config ke2303 well and executed for 'IviDCPwr .vi measure [MSR]', it multibordure errors. For the period of 15 seconds, and then reports errors that appear:

  The code (attached) when I test it with other food such as agilent66309d and keithley2306 (with ivi driver ke230x), it works well.

  I have no idea on this problem with power supply keithley2303, can you guys never encounter this problem and can answer for me to fix.

  Thank you for your reading and your help!

  Best wishes

  Phil