problem in using Flash Builder 4.5 action script component...

Similar Questions

• Problem installing Adobe Flash Builder 4.7 (Windows 64)

  I have a problem installing the 64-bit version of Adobe Flash Builder 4.7. I have not had any problems with the 32-bit version.

  First of all, I couldn't download the installer by Akamai Download Manager. When the download is complete, about two-thirds, I get the error "failed to check content (content invalid). I tried several times with several different browsers but no luck.

  I am able to get the installation program by using the other method to download but when I go to use the extraction of the file progress gets to 100% and then I get then I get the error, "this is a problem when extracting the files. Check the amount of space available on your computer and write on the desitnation folder rights. »

  I have 72 GB available and the installer extracted the files in my office that I have full read and write. I am logged on as a user with administrator privileges and have tried to launch the file as administrator.

  All ideas are appeciated!

  Thank you!

  Jill

  Jill from your description, it seems you are facing problems of stability with your current Internet connection.  It seems initially the corrupted download based on the errors that you have posted.

  I advise to use another connection to see if you encounter the same difficulties.  If you are connected wireless, for example, please try a wired connection.

  You can also download the installation files on a USB stick on another computer, and then install from the USB drive.

• I need help in creating one (Table / Grid) using Flash Builder (not a datagrid)

  I'm looking for a way to create a dynamic table / grid somewhat like a sheet or spread html table. but I want to create all the cells via a loop.

  The following diagram was created using php to execute a loop and writing on the cells and the duration for each cell in the grid/table. But I have no idea where to start in flash builder to build something like this.

  Some cells will last 2 to 4 columns as shown in the following diagram.

  

  Any suggestions on how to create this type of table or grid in Flash Builder?

  I looked through most of the components, but I'm not sure which component to use.

  Help in this would be greatly appreciated.

  Thank you to

  Maurice

  It's ok, I thought about it.

  just by using containers grid Flash builder 4.5

  

• Support useful Flash builder 4.5 on Win7 installation error

  Hello

  I browsed several forums and tried all possible means to get rid of the errors, always I get the following error log is beyond my permutations and combination efforts.

  Any help will be much appreciated.

  Thank you

  Miral

  ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ -----------------------

  LOG---------------

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 1 WARNING (s)

  WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the load of the session {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 has no connection to upgrade/conflict with it.

  ERROR: DS013: check the integrity of the payload: failed with code 1

  -Payload: {650C9D09-D5BD-4532-8BEE-01DBC1DF5537} Adobe Flash Builder 4.5 4.5.0.0 -.

  ERROR: DW030: a Custom Action for payload {650C9D09-D5BD-4532-8BEE-01DBC1DF5537} Adobe Flash Builder 4.5 4.5.0.0 returned the error. Failure to comply with this payload.

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Flash Builder 4.5: installation failed

  -------------------------------------------------------------------------------------

  Nothing wrong at all with these characters in the installation path, but it is possible that the characters that it chokes are in the path to your user profile (home) folder. What is the full path to your folder user, such as c:\Users\yourUserName\?

  The best way to know with certainty where it's a failure, however, is looking into the above setup logs. Have you tried yet?

  -Chris

• What version of ColdFusion do I use Flash Builder 4?

  I spent reviewing all the wonderful things that can be done with Flash Builder 4. I currently have ColdFusion (CF) MX 7 and Adobe Web Premium CS5 (which includes Flash Builder 4). I will be able to use FlashBuilder 4 (FB4) with CF MX 7 or FB4 only works with CF 8 or 9? None of the tutorials/articles-how-to resources I've read clearly indicate what version of CF is necessary.

  Although I asked him, I see not my dept COMPUTER upgrading to CF 8 or 9 anytime soon. So if I can't use FlashBuilder 4 with CF MX 7, what are the alternatives any recommend development of a RIA - data editable web app (very probably with a SQL Server DB)?

  FB4 is a text editor.  He might have a few bells and whistles to expedite the process, but at the end of the day, it is an application for the registration of text in files.

  CF (any version from 1.0 to version 9.0.1) is an application server.  The 'short' version of how this works, it's that it receives a request to a web server, bed CFML in a series of text files, each one compiles, executes the compiled code that will generate probably more text (say: some HTML) and passes the result to the web server.

  FB4 and CF have no interconnection whatsoever, apart from the fact that both work in text files: FB4 to create; SEE to read.

  You can use FB4 to write source files for all versions of the CF.

  I'm guessing a difference (which could be confusing the issue here) between CF and Flash as the author, is that I assume that FB comes with a Flash compiler to convert your source files from a SWF file.  CF, CF server does this automatically.

  --

  Adam

• CC - Flash don't support action script 2

  I have some programs that use action script 2, but when I try and open them in the new version of the CC for flash it says that it does not support AS2

  I have to keep the program on an older computer with a previous version of flash

  It is not cost-effective to update *-any suggestions on what I can do in the new version of CC?

  or CC have access to previous versions of flash?

  Wayne

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

• A problem when using Flash files with a browser

  Hello

  I have this weird problem when it comes to the use of flash in dreamweaver, whenever I use a flash file & after I test it on Both Firefox & IE browser), I get this weird border whenever I click on it, and here's a photo shows u what I mean...

  If all goes well. I'll take a few answers:

  Thanks in advance.

  Try adding the following (in red) to the style of the web page and see if it helps...

• Is a subscription to creative cloud had to use Flash Builder Premium 4.7?

  Hello

  I FB 4.7 Premium (bought an upgrade) and a subscription to creative cloud. I do not need CC now, I'll still be able to use FB when I cancelled? I have searched all over the Adobe sites and not found a clear answer to this...

  Thank you

  Dave

  Hey, I spent a little time to sort this out so I can answer my own question, maybe you will help someone else in the same situation.

  Short answer is Yes you can.

  But if you have installed FB 4.7 under the creative cloud want to then cancel CC and using standalone FB 4.7 keep reading...

  Buy Creative Suite 5.5 and got FB 4.5

  Free upgrade to FB 4.6

  Started creative installed cloud 4.7 FB using that.

  Decided that I don't want creative cloud subscription, just FB 4.7.

  Bought an upgrade to FB Premium 4.7 as a standalone application.

  But... no installer for FB 4.7 Premium from my account downloads page. Adobe assumes that you get from CC

  Find a download, installed it and it would not accept the serial number of FB 4.7 level or serial number CS 5.5.

  Solution

  Call Adobe Support, they will guide you through the installation of the stand alone version w/o CC and give you a temporary key to complete the installation. Who has only had a few hours on the phone!

  Downside is that you must call whenever you install FB 4.7, is not good.

  It would be great if Adobe would put this information in a FAQ.

  Dave

• Can I use Flash Builder 4.7 to develop the 2.1 OS applications?

  It seems that a minimum AIR SDK version with which he is working is 3.4. I get a warning that the AIR should be 3.1 when trying to launch my application on playbook. I tried AIR forcing to version 3.1 of this Manual , but it does not help, she complains that incorrect namespace.

  Hello

  That right now the workaround is to delete or rename the adt.jar file

  Directory of \blackberry-Tablet-SDK-2.1.0\lib

  Please note that this file is hidden by default.

  We are updating the documentation.

• Packaging and signing in Flash Builder Burrito using 0.9.4 SDK

  Hey guys. I know frankly, there are 1 million post on the forums about this, but I wanted to be sure and had a few questions myself. Good so I used Flash Builder Burrito to sign and package my request. My app is a Mobile Flex Application and I use 0.9.4 SDK. I used the MANY post on this forum through signature and methods of packaging and it worked perfectly, no errors at all. The two files that I got after conditioning and signature was my apps .bar and bar.sign files. I saw in other post to extract the .bar file to see if its signed and if the icon is there. How do you do this will WinRAR or PowerISO to extract this file type. I fear only because all Iv seen post are all saying theres tons of bugs with the packaging and signing using burrito, but all I could see was that they were using the SDK 0.9.3. Should I have a problem with my .bar file? I don't know how to extract my .bar file to view the contents, so I can at least check to make sure that it is signed and packaged properly. Can someone me another message or an article on how to extract the .bar file and check to make sure that its all good to present, RIMM. My previous version was rejected of RIMM is not signed and sent the Bug of version. I have just re-climbed the .bar I got to use the new SDK and had no errors, so I hope this is right. Anyway thanks in advance and any help would be great.

  The .bar file is just a zip file.  It will work any util that allows to read a zip file.  If you need to rename the .bar to a zip file, which is OK, but be sure to rename it before upload.

• Flash Builder 4.5.1 - compilation problem version release Flex Mobile

  I am building a mobile application from flex using Flash Builder 4.5.1. The application works very well on the device (Nexus S) and office in debug mode however, whenever I export the Release version of what the app is not automatically installed on the device. When I manually install .apk it fails also (get the message from the Application that is not installed with the green check mark). Any thoughts?

  The problem was with signing of certificate (.p12). As soon as I created a new certificate, everything worked took place.

• Create plugins in Indesign using Adobe flash builder 2.6

  Dear Sir.

  I would like to develop a plugin in In Design using flash builder 2.6, but I used before I download Adobe extension builder 2.1 to integrate flash Builder 2.6, but now I can't find a way to get Adobe extension 2.1 and version 2.0 of the Ewer can be integrated into flash builder 2.6

  So what can I please?

  and if InDesign have abandoned Flash in indesign-based panels, so what's the easiest way to build a powerful without the help of C++ plugins, I need to create the plugin to add to the menu with a specific, not in the script Panel name

  Thanks in advance

  See here for my response to the original thread.

  Note you do not need extension fancy or short-lived technology to create menus, going for a simple ExtendScript.

• Flash Builder - launch failed

  Hello

  I am new to Flash Builder and Action Script so this may be something obvious to others...

  Flash Builder is not re - generate swf and html files in the Bin-debug folder and therefore fails with the message "unable to launch. Here are the steps to reproduce the behavior:

  • Using Flash Builder 4 on Vista
    
  • create the folder NomMonProjet
  • File-> new-> ActionScriptProject (provide NomMonProjet)
  • Project-> build the project (creates html and swf files in bin-debug correctly)
  • Go to Flash Debug perspective and start the debugger; Browse the 'empty' OK code
  • Close project, close Flash Builder
  • Add the code AS
  • Open Flash Builder
  • Refresh (F5) file system
  • Project build
  • The debugger steps as if the FORMER Action Script code is in the file!
  • Project and build own workspace
  • All bin-debug files are deleted, but are NOT re-created.
  • Launching fails (they are a no files in the bin-debug folder)

  I made sure that the ActionScript compiler settings are "checked" to generate wrappers, system restarted, looked at the process in Windows Task Manager, searched the web, but all to no avail. I am convinced that there must be something simple I'm missing preventing a good compilation of my project (unless there is a serious bug on a part of the Adobe...)

  A big thank you to all those who care for help!

  Nick

  Hello

  Can you check the view of problems (below) to see if there are compilation errors?

  Or you can edit your hand LIKE file here and we can take a look.

  Thank you

  Rémy

• Flash Builder 4.7, Flex 4.9.1 and AIR 3.4 for Playbook?

  Hello

  IM, develop an application using Flash Builder 4.7, Flex 4.9.1 and AIR 3.4 for multiple platforms. My question is when I deploy to Playbook, is mentioned the configuration can cause problems or not?

  What should I do to ensure that my apps running on the playbook and other devices too! using Flash Builder 4.7

  Thank you

  PlayBook (and BB10) currently only supports AIR 3.1.

• How to improve the performance of Flash Builder 4.5

  Hello guys!

  I use Flash Builder 4.5 for my apps, but my apps have a lot of class and when will the compiler or anywhere, change that in my code the flash builder it takes a long time to build. How to improve it?

  I solved this problem, I change the FlashBuilder.ini with this line

  -vmargs

  -Xms256m

  -Xmx1024m

  -XX: MaxPermSize = 256 m

  -XX: PermSize = 64 m

  Thank you