Problem installing ffter updates KB2657424 - KB2656351 - Kb2656352 and KB2656353

Similar Questions

• Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

  Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
  The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

  Hi Ben Dean,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

  To run the System File Checker, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  For more information, see the following Microsoft article:

  This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• I just install an update of Adobe Reader and find now that I've lost all screen savers. Please can someone explain how I can get them all back!

  I just install an update of Adobe Reader and find now that I've lost all screen savers. Please can someone explain how I can get them all back!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Try to install the update for creative cloud and it gets to 43% and then says error code: 50

  Try to install the update for creative cloud and it gets to 43% and then says error code: 50

  N ° 1)

  Leaving Adobe Creative Cloud application and put an end to all the Adobe Task Manager process / Activity Monitor [mac].

  Step 2)

  Uninstall Adobe Creative Cloud using Creative Cloud uninstaller.

  https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  Step 3)

  Reinstall the Adobe Creative Cloud application:

  Windows: https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe

  Mac: https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg

• Windows Vista has problems to install the update for Office home and Student 2007

  I can't widow vista to install an update for Microsoft office home and Student 2007. I have to uninstall and reinstall the program from the cd that came with my pc and that has not worked. Can you tell me why I have a problem with it.

  I can't widow vista to install an update for Microsoft office home and Student 2007. I have to uninstall and reinstall the program from the cd that came with my pc and that has not worked. Can you tell me why I have a problem with it.

  Hey bluefeather1964

  It comes to the installation of vista operating system instance

  You'll have to repost in the windows update forum

  and tell them everything error codes and the KB numbers when repost you it

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  This is the normal error code 646, that you get with the office updates

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• Problem installing Windows Updates error code is 80070002 and also unable to update the driver Qualcomm Atheros DWA-552

  Original title: qualcomm-atheros driver for dwa-552

  Since last week, I have a problem to update my adapter pci wireless d-link dwa-552. Windows is unable to install the update. Since this problem, my internet connection drop and goes to the limit. Is there a way to complete the update? Or the Qualcomm-Atheros driver is completely *? Here is what windows mean when I try to update my pci card. WindowsUpdate_error Code 80070002. Update Windows encountered a problem no? Windows has encountered a problem? Your kidding me? God miss me windows 7

  Thanks for the reply. In fact, I changed my internet adapter since so I don't have the problem anymore.

• I'm having a problem installing windows updates - I'm trying to install the Client update Pkg - get error 80070643 AND also Synoptics Touchpad error getting 80246001 HELP

  These 2 updates failed repeatedly - don't know why. Help, please

  Hello

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  _______________________________________________________________

  for questions of touchpad, please repost in the Vista Hardware and the Forum pilots;

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

• Windows Update won't install platform update for Windows Vista, and I can't find it anywhere to download.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/971644

  How to get the platform for Windows Server 2008 and Windows Vista Windows Update updates

  Update for Windows Server 2008 platform and the platform for Windows Vista update can be downloaded from Windows Update. To obtain these updates, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     Click all programsand then click Windows Update.

  2. In the navigation pane, click check for updates.
  3. When updates are found, click view available updates.
  4. Select the package to update that you want, and then click install.

  For problems with Windows updates:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem installing Windows updates.

  After you install the updates for my windows 7 Home Basic, my system could not start. It keep saying. "prearing to configure windows... don't put your computer 'everytime." Please help how to solve the problem. I use 64-bit edition.
  so far I don't have any problem with the updates. It's a windows genuine with eDELL inspiron camw.

  I tried all means and did not find the solution.

  Instead I came up with some information after the Startup Repair.

  Please find the details.

  Details of the system startup reapir attempt.

  problem event mouhamadou: startuprepair offline

  signature of the problem 01: 0.0.0.0

  signature of the problem 02: 6.1.7600.16385

  problem signature 03:unknown

  problem signature 04:21200825

  signature of the problem 05: Autofailover

  problem signature 06:15

  signature of the problem 07: curropt volume

  OS version: 6.17600.2.00.256

  LocaleID: 1033

  I tried

  1 remove pending.xml

  2. all the options under the F8 key.

  3. one thing my restore points have been deleted (so sad) yesterday. Previously, I was managed to restore, but yesterday they weree not available, saying that no restore point not existence.

  The only thing that I can open opened the command prompt.

  Please anyone suggest me.

  You're mowst welcome Mallik. Sorry to hear that Dell don't did not help you.
  Is the system under warranty? If so, according to the information that you have posted, the hard seems to have a problem-
  signature of the problem 07: corrupt volume

  I can't say for sure, but it seems that the hard drive itself either begins to miss or Windows 7 itself is corrupt according to that entry.
  IF you can start safe mode, you can at least save the data on the system for a thumb USB or external hard drive.

  It appears that your only recourse would be built in the recovery partition to restore the system with Dell.
  BUT, if the hard disk itself fails, you will lose your time.
  If the system is still under warranty I would contact Dell and run their diagnostics to verify the health of the hard drive.

  Expert MowGreen Windows IT Pro - consumer safety

• UPDATES SEVERAL TIMES KB2656352 AND KB2572073

  KB2656352 AND KB2572073 OFFERED SEVERAL TIMES EVEN THOUGH HISTORY SHOWS THAT THEY HAVE BEEN UPDATED CORRECTLY?

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• Problems installing VISTA updates

  Recently, whenever my PC downloads updates for VISTA, it fails to shut down properly, just says it's installing updates - that is never finished. On reboot, the computer allows me to connect and instructs the bureau, but crashes after about two minutes, no matter what program I use.

  Hi Sallybettymary,

  1. you receive messages or error codes?

  Method 1:

  Step 1:

  You can check the status in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are able to boot into safe mode without any problem, you can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  Step 1:

  You can also check in the history of update to see if updates failed to install.

  a. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it and check for errors.

  See the Windows updates are installed

  Step 2:

  If impossible to install updates, then you can try to download the stand-alone package of failure update from the Microsoft Download Center and see if it helps.

  Hope this information is useful.

• Users cannot install the update of my application and impossible to reinstall the application.

  I have an App World app, the first time, it's a free app (ver: 0.9), but later I changed it for a paid app. recently, I published a new version of this app (ver: 1.0) and free package upgrade.

  But users who have installed my app when it's free cannot install the update!

  I Can't download the update. I keep getting the following error "There was a problem installing...please try again." I've retried many times and reset my device but nothing works.
  

  software shows an update to Version 1.0 from .9 however,
  the update errors out and fails to download.
  

  They tried to delete the app first, but they can not reinstall it, even if they want to buy, but App World allow them to do!

  I tried uninstalling it and now I can't reinstall it. ???
  

  I can not even reinstall from appworld.
  Let alone purchase.
  

  but i try to paid for it and when i go to do it, it dont allow me
  

  It is really strange, what do I do?

  I feel your pain, but you can't do much. This is a known issue with AppWorld during the passage of the free paid, thats why this option is no longer available for providers.

  The only way to mitigate the damage, push a paid upgrade, say version 1.1. Make sure that the upgrade price paid matches the original price of app, otherwise it would be confusing to users.

  Advantages of such an approach:

  -Users who want to pay will be able to download the upgrade, you get the money

  Disadvantages:

  -You will get a lot of negative comments from users who have as free version

  -Those who have already purchased as paid app will have to pay to upgrade too

• Problem installing the update of blackBerry Smartphones BB App World

  I have a very old BlackBerry App World build my torch.  While I wait for a Z10/Q10, I try to update.  For some reason when I update to 2.1.1.2 to 4.3.0.26 I get a Setup error.  Any suggestions on how to do it?  I don't see a way to remove the BlackBerry App World and reinstall.  Thank you.

  -Eric

  Hi ericschiff

  Welcome to the Forums of the BlackBerry Support

  What model of torch you have! If you encounter a problem with the update you can try to re - install BlackBerry World. For which first of all, go to Options > device > application > locate and remove BlackBerry World of this list.

  KB10040 : How to view or delete an installed BlackBerry smartphone applications

  After deletion to perform a battery pull reboot by removing the battery in your device is on.  After you restart your BlackBerry browser go to www.blackberry.com/appworld and download the most recent version. Perform a restart after the installation.

  Try it and tell us if you feel any problem.