Problem installing SP1

Similar Questions

• Problems installing SP1 and SP2

  My update watch folder I installed SP1, but I continue to receive update messages telling me to install SP1. When I try, I get a message that the installation has failed. When I try to install SP2 I get the message that I need to install SP1 first. Yet that said SP1 is shown as not being unhooked. Running Fix - it, but nothing does not change. My OS is Vista home premium and I HAV e recently re - install the operating system.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  I'm sorry to hear that you are not able to install the SP1 and SP2 on the computer.

  Try these steps and see if it helps.

  Step 1:

  Hide the SP1 update to the folder updates offered.

  Consult the following link:

  http://TechNet.Microsoft.com/en-us/magazine/ff382716.aspx

  Note: Also applies to Windows Vista.

  Step 2:

  Try to download the SP1 standalone package and install it.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  Once SP1 is installed, try to download and install SP2 from the following link and check if that helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  Hope this information helps. If you have any other questions feel free to answer in the next forum, and we would be happy to help.

• I can't install windows vista SP2 and problem with SP1

  So I installed SP1 with windows update and each update, it says service pack 1 in the list of installation. Second problem, I downloaded the file for SP2 and when I open it it just comes up with the error message "these data are incorrect."

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Monitor problems after installing SP1

  After installing SP1, on reboot, the screen works nto correctly.... I see the cursor and screensaver.  .. everything else is black

  WTH?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem installing XP Mode in Windows 7 Pro (64) SP1

  XP mode has been successfully installed, but does not have Virtual PC. I downloaded the correct file - Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu - and when I try to install it I get this update is already installed on my computer - but Virtual PC does not. What now?

  Thanks for any advice that can be offered.
  SoC

  [Original installing KB958559] proved to be corrupt, while Virtual PC installed not [so I uninstalled then reinstalled KB958559] it.

  
  Source: https://social.technet.microsoft.com/Forums/windows/en-US/7275b2b5-29ef-4680-9f61-56b9a7457153/problem-installing-virtual-pc-for-xp-mode-in-win-7-pro64-sp1?forum=w7itprovirt

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Vista - Error Code: 80070005 (cannot install SP1 KB936330)

  I get an error code 80070005 whenever I try to install Windows Vista Pack 1 (KB936330) why that I get this message and how do I solve the problem?

  I get an error code 80070005 whenever I try to install Windows Vista Pack 1 (KB936330) why that I get this message and how do I solve the problem?

  80070005 means "access denied", you do not have the right to not want you wanted.

  So were you connected to your administrator account when you try to install SP1? You must.

  Here is an answer from another forum of Microsoft:
  Response of NeilBooth has been marked as answer.
  Fold another suggested dsiabling the anti-virus program

  Title: Vista SP1 installation fails with error code 0x80070005
  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/cf2c57e8-AED5-4C71-b58d-499cc901d796 For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Vista - Error Code: 80070002 (cannot install SP1)

  Hello

  I was wondering if someone could help me please?

  I tried to update my Vista Edition Windows Home Premium,

  Processor: AMD Turion (TM) 64 x 2 Mobile Technology TL-50 1.60 GHz

  Memory (RAM): 958 MB

  System type: 32-bit operating system

  and keep facing the same problem over and over again! I followed all the instructions, help and support, and blogs on the internet and nothing!

  Can someone please please help me? I'm desperate!

  Kind regards

  Ed

  - How to obtain the latest Windows Vista service pack

  Please read this first -
  Method 3: Get the latest Windows Vista service pack from Microsoft Download Center

  Download link for Windows Vista Service Pack 1 five language standalone (KB936330) 32-bit

  Once the download is complete, create a folder on the root drive (the drive where Windows is installed on, usually C:\) and name SP1.
  Now move the downloaded, saved, on this file standalone installation package.

  Configure the system to boot
  Now, install SP1 by the right by clicking on the file. Windows6 0-KB936330 - X 86 - wave0.exe (Vista SP1 - 32-bit) and choosing "run as administrator".
  Accept the UAC prompt.
  After the required reboot and installation of SP, Cancel the Clean boot steps and restart in normal Windows mode.

  If you still need assistance in obtaining of Vista SP1 installed - free support for Windows Vista service pack problems

  MowGreen
  Expert in Windows IT Pro - consumer safety

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• Impossible to update Vista - cannot install SP1 or other updates

  After trying to download, I get this:

  Some updates were not installed:

  Code 64 c

  4 results for "WindowsUpdate_0000064C" "WindowsUpdate_dt000"

  	1 problems with installing updates
  	2 Windows Update, error 8024402C
  	3 error code Windows Update 80070422, 80244019, or 8DDD0018
  	4 Windows Update error 80070643

  I am running Vista Home Premium and it used to install SP 1 not to mention all the others.  The short time the system even gave me a notice a few times that I was not running genuine Windows software even if it is enabled and varified authentic by Microsoft support. I had to install today and it restarts after installing 3 3 parts of the CIP of service. After the restart, he says that the update was not installed and there we reversed to where we started. Ouch, I'm a damsel in distress here!
  Thanks in advance for your help.
  Amber

  Amber,
  I suggest that you run the following tools and then try to install SP1.

  First to perform a clean boot on your PC.
  Run the disk error checking.
  Run System File Checker.
  Run the System Update tool.
  So if these tools did not report any errors, then install the SP1.

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• problems installing SP2 and code 80070490

  I am trying to install SP2 manually because my updates do not work.  Once I download it, it tells me that I have to install SP1 first.  According to my system, I'm already running with SP1.  Don't know what to try before you take it into the store.  Any suggestions?  I tried to uninstall SP1, and then reinstall it, but it is not in the list of updates to uninstall.  I don't know what is happening.

  I also get the error code 80070490 when I try to check the updates.  The Help Center tells me to do something with the disc, but as usual, I do not have a.  It came not with my computer, even if the program doesn't, do not know why they do not give you the drive.  I was wondering if there was a way to get one if my computer is under the age of one year, or what I have to do.  I want to try to solve this problem on mine before you take it to the store.  I absolutely don't want to pay $ 300 to $ 400 for a disk when I already have the product.

  Hi DDJohnson,

  Thanks for the response on the Microsoft answers Community Forums.

  Just outside chances run SFC and see if any corruption appears.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program

  Generates in Windows Vista cbs.log

  http://support.Microsoft.com/kb/928228

  Try new preparation tool running system update.

  Once after correcting these errors try to download the standalone package and then try to install

  Download the stand-alone update: x 64 | x 86

  Hope the above information helps.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• When I try to install SP1 I get error "an internal error has occurred in the installation of the service pack".

  Original title: Windows Vista SP1

  Hello

  I brought an old computer home from work, and it is in Vista, but he needs service packs 1 and 2.

  When I try to install SP1 I get the following message: -.

  An internal error occurred during the installation of the service pack

  Error 0x800B0100

  http://go.Microsoft.com/fwlink/LinkId=101139

  Can anyone help?

  Thank you

  Bob

  Hello

  You don't say how you try to install SP1

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  ______________________________________________

  And please read this too.

  http://www.Vistax64.com/Vista-General/187922-Vista-SP1-0x800b0100-error-fix.html

  See you soon.

• I can't seem to install SP1 with Vista Home Basic and receive the error code 80073712.

  I can't install SP1 with Vista Home Basic.  I get an error code 80073712.  I tried to install the system update readiness tool and it tells me that my system does not apply to it.  I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?

  Moved from Vista to install, upgrade and activate Forum.

  Original title: installation of SP1

  I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?

  Donald,

  The computer belongs to you or your employer?

  (When was the last time you checked your system for malicious programs?)

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://www.SUPERAntiSpyware.com/onlinescan.html>

  `~`

  Click Start type cmd (you should see the command prompt fill up) right click and select run as administrator.

  Inside the command prompt, type sfc/scannow

  * Information about the System File Checker

  http://support.Microsoft.com/kb/929833>

  Reset

  `~`

  Run the link Fix It, you will find on this http://support.microsoft.com/mats/system_maintenance_for_windows/en-us>>

  `~`

  If no malware has been detected, then please download and Save the tool update system (or CheckSUR).
  http://support.Microsoft.com/kb/947821>

  Be sure to download the version of the tool that fits the computer architecture. If you don't know what it is, then click on the link under

  http://support.Microsoft.com/kb/827218/en-us>

  When the download is complete, please read this before you run CheckSUR.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135>

  Once you have configured and rebooted the system to clean boot state, run CheckSUR (. Windows6 0-KB947821-v10-x 86.msu or)
  Windows6.0 - KB947821-v10 - x64.MSU) with the system connected to the internet. It will download and try to fix the incompatible component store.

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled.

  Open Control Panel > firewall Windows to check the native Vista Firewall now on.

  When CheckSUR finishes running, restart the computer.
  See if it can be updated now by opening Windows Update in Control Panel and clicking on the link to check for updates in the left frame.

  FYI

  If the tool (Checksur.exe) system update solves the problem, you will need repair Windows.

  `~`

  The time and date of this moment in British Colombia, Canada is 01:05

  Friday, February 14, 2014
  Pacific (PST) - 0800 UTC standard time

  UTC/GMT is 09:05 on Friday, February 14, 2014

  Current weather conditions in Vancouver

  Cloudy43 ° F / 6 ° C

• Cannot install Sp1 getting error as "0x8e5e03fa".

  Hello

  This is hady I use pre-installed Windows vista Home premium and I'm unable to install sp1, whenever I want to install SP1, I get the error message like "0x8e5e03fa".

  Please help me with this.

  With respect,

  Hussain Mohammed Habeeb

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Vista - after installing SP1 computer does not.

  Have a laptop with Vista.  After several months of trying to download & install SP1 and failing repeatedly (connection problems - too many wireless phones, etc. in the area) I finally took the computer to my home, got ' weak ' neighbor, successfully downloaded the MS, began installing and I'm not clear if it was completely installed or not.  I guess that this is a not restart (not stopped?) when installing as I was warned.  I came back to a blank black screen and it will not shut off/down and it will not also power upward.  Help!

  Hello

  Thanks for the reply.

  The error message is not clear. What is the exact full error message?

  Try these methods.

  Method 1

  Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration

  http://Windows.Microsoft.com/is-is/Windows7/using-last-known-good-configuration

  Method 2

  If the problem persists, I suggest you perform a startup repair and check if it makes a difference.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  In addition, you can do a System Restore the Windows Recovery Console.

  Kind regards

  Anil