Problem installing SP3 in Windows XP

Similar Questions

• Error 0x8007054F code: could not install SP3 for Windows XP

  original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."

  I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...

  Your loyal customer

  Hello

  
  To work on the issue, refer these methods
  
  Method 1:
  
  Read the following article.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Method 2:
  
  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384
  
  Registry warning:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
   
  See also,
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   
  Hope the information is useful.

• DVD player doesn't work after installing SP3 for Windows XP.

  DVD player doesn't work after installing SP3 for Windows XP. That it disappeared from "MY COMPUTER". Device Manager sees it, but there's a yellow exclamation mark over it. See the BIOS of the motherboard and it still works in the BACK. I know SP3 is a collection of updates, but I'm not sure that is my problem. I suspect it's one of the more recent cause I have Windows automatic updates is turned on. Thank you.

  Hello Superhornet142,

  Thank you for your message.  Click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• CANNOT install sp3 in windows xp HELP.

  I can't install the sp3 for windows xp, when I try to install and reboot a black screen appears with, various messages to, starting in the last known configuration starting in the last known good configuration, start with network etc etc, I have to use the keyboard to select the choice 1 and then I have to do a system restore to get back into my computer. I ran my anti virus which is coming back clear, NO spyware or viruses. My computer is also very slow, I have NO music on the computer programs or anything that could make it go slowly. I don't really know what to do, I'm not very tech at all, make me more and more confused as to what to do appaert to throw our the window lol lol. Thank you VERY MUCH in advance for any help given11 Karen x

  Nanna leighlas,
  Please post with the information requested here: what to post in the Windows Update forum

  I would say you can try a different virus scanner (such as a scanner online) just to check that you don't have a problem with virus\malware.  Here are some links that can help with this:
  Get rid of malware 
  Can I clean an already infected computer?    
  Windows Live OneCare Safety Scanner Windows XP

  Then, you must perform a clean boot on your system and then try to install SP3.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems installing the three windows updates KB2698035, KB2761226, KB2727528, error Code: 0x8007F0DA

  I ran Windows repair , but the problem persists.

  some high priority updates do not install automactically or manually in detail below.

  Update for Windows XP (KB2761226) security Error Code: 0x8007F0DA 

  Security Update for Microsoft .NET Framework 1.0 SP3 on Windows XP Tablet PC and Media Center (KB2698035) Error Code: 0x8007F0DA

  Update for Windows XP (KB2727528) security Error Code: 0x8007F0DA

  Hello

  Did you follow the methods to solve the problem?

  If you have not tried the troubleshooting methods, I suggest you try these methods and see if the problem still occurs. Answer us about the State of the question whether or not it is resolved.

• Problem installing iTunes on Windows 10

  I get an error message on the installation in the installation of iTunes to Apple Application Support. Specifically, the text reads:

  ""Microsoft.VC80.CRT, type = "win32", version = "8.0.50727.6195", publicKeyToken = "1fc8b 3b9a1e18e3b", processorArchitecture = "amd64" '. '. See Help and Support for more information. ' HRESULT: 0 X 80073715.

  In addition once iTunes is installed and I try to open it it wont let me.

  The message "an error occurred during the installation of assembly ' Microsoft.VC80.CRT, type ="win32", version ="8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture is...» "may occur because a particular library file is not included in the supplied with iTunes distribution package or will not be installed because some unspecified reason. Install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update before you attempt to reinstall iTunes can help.

  When to reinstall iTunes, right-click on the Setup and run as administrator.

  See troubleshoot problems with iTunes for Windows updates for more information if necessary.

  TT2

• Problems installing iTunes on Windows 10 12.3.1.23

  Hello

  I had this problem for two weeks, I don't know how to solve, and it would be good to have help.

  Two weeks ago, I noticed that after I had plugged my iPhone into my PC 5, only Windows Explorer recognized iTunes didn't.

  So I tried to see if there were updates for iTunes, but no update has been published.

  I used Windows 10 tools to uninstall it and then tried to install it again.

  Before that, I used CCleaner to make sure that no left, files or old registry key remained in Windows.

  Then I tried to install iTunes 12.3.1.23 by downloading from the Apple Web site and by opening the Setup program.

  Since then, every time, when I try to install iTunes, installation work until it says "Restore action", and a new mask appears, where it is written that there is a problem and that Setup could not install the software.

  After trying this for 3 - 4 times, I went to C:\Users\MYUSER\AppData\Local\Apple\Apple Software Update and tried to run all executable files in this folder, which contains installers for each program, Apple needs to install iTunes on PC separatelly, distinguished by the installation program downloaded by the Apple because one website you can download contains all the facilities of programs in a single installer.

  I managed to install all the software, with the exception of the Apple Mobile Device Support (version 9.1.0.6), who, as program controls when a unit Apple is plugged to the PC, and it has not worked since the beginning and is the one who made me do all this, in my view, is the same as the one send me problems during the installation of iTunes when I run the installation program downloaded by the Apple Web site.

  Anyone have the same problem and/or know how to fix this problem?

  I have 10 Home Windows (64-bit) version 1511.

  Thank you

  A

  SPECIFICATIONS OF THE PC:

  Name: HP Pavilion 15-P258NL

  OS: Windows Home (64-bit) version 1511 10

  CPU: Intel Core i7-5500U @ 2.40 GHz

  RAM: 16 GB DDR3

  GPU: NVIDIA GeForce 840 M with 4 GB of dedicated DDR3 memory

  FEATURES of the iPhone:

  Model: iPhone 5 s, black

  Capacity: 16 GB

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Your library must be affected by these measures but there are also links to the backup and recovery advice it should be necessary.

  In some cases with 64-bit systems, you may need to install the version of iTunes for Windows (64-bit-for older video cards) and QuickTime to enable iTunes work with some videos. 32-bit users must install QuickTime.

  TT2

• problem installing SP3 on xp

  The installation of service pack 3 (KB936929) on xp home edition, I get the error message that it cannot find a file. It initializes, starts to install and then a window opens stating he needs to a different path to the folder containing the installation package 'PROPLUS. MSI ". He was looking in a folder called C:\WINDOWS\SYSTEM32\DRVSTORE located in SYSTEM32 in my WINDOWS folder. If I continue, I get to the install window, and he warns me backup... I know that it will not install. I don't know how to do this... or simply forget about service pack 3.

  Well, it's weird, Windows XP SP3 request proplus.msi located on the Microsoft Office XP Professional with FrontPage editing disc.

  Put you to update Office XP with SP3, or Windows XP with SP3?

  Please advise us as to what level of Windows XP, you're currently at.

  1. click on Startand then click run.
  2. in the run dialog box, type winver
  3. click on OK.

  A dialog box displays the version you are using.

  You have MS Office XP Professional installed and if so, what level of SP is MS Office currently.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update does not install SP3 on Windows XP Pro computers

  I have about 400 computers running Windows XP SP2 withIE 6.  It is set to automatic updates on installed every day at 03:00.  For some reason, SP3 is installed automatically never.  If I run the windows update manaully, it offers me to install SP3.  Is it normal?

  SP3 does not install automatically. It's like IE8.

  Perhaps this may also be of interest:

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  TaurArian [MVP] 2005-2010 - Update Services

• Get [error number: 0 x 80070424] when you try to install SP3 with Windows Update

  I got [error number: 0 x 80070424] when I was trying to do the updates window to install sp3, whatever that means? And how to fix it?

  http://support.Microsoft.com/kb/968002

  or

  http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

  should fix

• Satellite click 10 - problem installing drivers after Windows Installer 10 costs

  Model: LX0W-C-104

  So, I installed a new copy of Windows 10 on my 10 click that I came to regret.

  I could not install the sound drivers and wireless

  I have download the drivers from the Toshiba driver site, put on the laptop and running the installation. First the driver extracted, then a windows message appears, asking if I want to launch the program, I click on Yes, then nothing happens.

  CAN ANYONE HELP?

  Even if someone could use Double Driver (a program that allows the backup of the drivers) to back up the drivers and their email to me, I would be you owe a huge favor.

  I also tried to install Windows 8.1, but exactly the same thing happens

  Appreciate any help you can provide.

  Hi iteek,

  If you solve this problem, I have the same problem and can't fix the sound card driver.

  Thanks in advance

• Satellite A200-1FL: problem installing Bluetooth on Windows 7

  Hello world

  I have a Toshiba Satellite A200 1FL (PSAE6E) with Windows Vista and I just installed Windows 7 32 bit (no update or upgrade).

  The problem is that when I try to install the bluetooth stack, it installs all ok, but the driver.
  I took the version 7.10.12 for Windows 7 32 bit from http://aps2.toshiba-tro.de/bluetooth/?page=download.

  The driver installation window presents itself and the progress bar does not move.
  I waited for a long time and nothing, no response, so I have to cancel.

  However, the software has been installed and when I try to start Bluetooth config or any other tool, the same phenomenon occurs: the driver installation window shows upward and nothing.

  Also, I tried to follow the installation instructions of command since the drivers toshiba download page guess what drivers are each options.

  Can someone knows why this phenomenon occurs?
  Am I missing something or is there a known issue with the Bluetooth in Windows 7 driver?

  Thanks in advance,

  Jorge

  Hello

  On my A500 during installation Bluetooth driver, he invites me to activate the Wlan switch. I don't know if A200 is equipped with WiFi switch. If this is the case, turn it on and try to install. I have more no other suggestion.

• Will not install SP3 for Windows XP.

  Download takes about 20 minutes or so, but the installation never ends.

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3

  • Windows XP SP3 - read all the prerequisites for a successful installation

  What offers Shenan Stanley is...

  1. Go to this web page: How to reset the Windows Update components? and use the Fix It utility in aggressive mode.

  2. Reset.

  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  4. Reset.

  5. Double-click the installation file downloaded in step 3 and follow the instructions.

  UTC/GMT is 00:25 on Friday 13 April 2012

• Problems installing drivers in windows

  Mr President, I bought a Toshiba laptop with Windows 7 HOme PRemium installed. Very recently, my hard drive crashed and I had to install the OS. I installed windows 7 ultimate. But it is not working properly. Some of the device drivers can not be activated. Especially wifi services.  How to fix it. It is a laptop computer for my personal research in the treatment of the image. Pls advice.

  Original title: problems with installation

  Hi Bama,

  Thanks for posting your query in Microsoft Community.

  I understand you have issues installing some drivers on the computer.

  I would need more information on this issue to help you better.

  (1) don't you perform a clean installation of Windows or it was a repair install or an upgrade of Windows?

  (2) what is the exact error you get all, installing the drivers?

  (3) do you still feel the drive hard breaks down in the computer?

  (4) what is the brand and model of the computer?

  In the meantime, please follow the following suggestions to solve the problem.

  If you have performed a clean install then, you will need to re - install the drivers for the hardware provided by the manufacturer. To reinstall the drivers, you can either use the drivers and Utilities disc if not, download the correct drivers from the website of the manufacturer of the computer.

  If this does not help then, try to refer to the below mentioned link to fix the problem.

  Automatically get recommended drivers and updates for your hardware

  Also refer to:

  Update drivers: recommended links .

  Updated a hardware driver that is not working properly

  I hope this helps. Otherwise, do not hesitate to write back the required information and we will be happy to help you.

  Thank you

• problems installing printers in windows 7

  Hi I am trying to install a brother MFC-J430W on a 32-bit windows 7 OS and I still get this error DIFxDriverPackageinstall = 10. I tried to download and install the new driver of brother support, but it doesn't seem to work. I rebooted. uninstalled then reinstalled... but nothing! a similar problem happened to me with an HP printer, it seems that the problem is with windows. What should I do?  Help, please!

  There are updates firmware for this printer. Check if you have the latwst.

  http://welcome.solutions.brother.com/BSC/public/NC/firmwarereleasenotes.aspx

  E the most recent driver is here:

  http://welcome.solutions.brother.com/BSC/public/us/ca/en/DLF/download_top.html?reg=us&c=CA&lang=en&prod=mfcj430w_all

  Update the firmware first.

  Then, remove any driver now installed, disconnect trhe printer, restart and install the driver according to the instructions.

  Tom Ferguson