Problem installing Windows 7: drivers needed

Similar Questions

• SATA Windows XP drivers needed for Satellite A205

  Not SATA drivers for windows XP THAT found on Web from Toshiba site work for all series of Satellite computers portable products?

  I have problem installing windows XP, XP cannot recognize a SATA hard drive.

  my model: Satellite A205-S5859.

  Hello

  The SATA driver are a part of the ATI graphic driver generally and are placed in the directory \SBDrv\SATA

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=132902𠜦

  And do not post twice!

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem installing Windows XP Mode in 7 Winjdows

  I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram.  This machine supports hardware virtualization, and it is enabled in the BIOS.

  Before downloading software in XP Mode, the MS download required Windows validation Web site.  Downloaded and reported validation validation and a successful installation.  Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko).  Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.
  According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."
  My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked.  There is, however, a new directory called
  c:\ProgramFiles\Windows XP Mode\
  but it contains no exe file.  It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it.  There is also a tutorial subdirectory.
  I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed.  Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.
  I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."
  If at this point, my question is simple, "what to try next?
  Thanks in advance.

  The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.

  You must install both files:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run

  Restart the system, and then install:

  2 WindowsXPMode_en-we

  ------------

  Uninstall Windows XP Mode:

  Click Start, type: programs and features

  Press enter on your keyboard

  Scroll down

  Select Windows XP Mode

  Click Change/uninstall in the command bar

  Uninstall Windows XP Mode

  -----------------

  Restart your computer

  Proceed with the installation of Windows XP Mode in the right order.

  --------------

  If it does not always show upward:

  Click Start, type: enable or disable windows features

  Scroll down

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• Satellite A200-1YO - problems installing Windows XP Home edition

  Hi guys,.

  First of all I'm new here so Hello to everyone here and I hope you can help me with my problems of software.

  I recently bought a laptop model Toshiba Satellite A200-1YO provided with windows vista (which must be frank, pants and IMO too demanding for the machine) and I have a problem with vista, because some of its features do not seem to work, for example, I'm having a lot of trouble getting some of the webpages to open now, they simply hang out.

  now, I didn't install windows xp but I don't have an external floppy drive. This is not a problem but because I can use Nlite to integrate the drivers in a new ISO of Windows XP.

  The problem is that I have 4 sets of drivers: ICH7M_32bit, ICH7M_64bit, ICH8M_32bit and ICH8M_64bit. As I install Windows XP 32-bit while I'm more or less some that I have not need 64-bit drivers but when I install Windows XP by using the modified version of windows xp slipstreamed, what I get at startup is a BSD error telling me that something has crashed on my hard drive , however I can't say which crashed as the screen disappears after 15 seconds if that so I guess there is something wrong with the drivers I use (though I must admit that I'm not sure the drivers 32-bit to use)

  advice and assistance regarding being able to install windows xp would be welcome, as I said above, however, I can only use Nlite since I do not have a usb floppy drive.

  Satellite A200-1YO has a chip with the ICH8M southbridge Intel GM965.

  So you need the driver for SATA ICH8M_32bit.

• install windows 7 drivers on HP Pavilion g6-2285sx Notebook PC

  Hello

  I was buy new hp laoptop and it came with windows 8 pro but I didn't like it so I remove it and I install windows 7 but when I'm looking for drivers for windows 7 on hp website I can't find support for the windows operating system 7 support for windows 8, so I want to download drivers windows 7 on HP laptop

  and he makes any mistake or problem when using or in the future on my pc? When I change to windows 7 or xp or any type of operating system

  my name is HP Pavilion g6-2285sx Notebook PC

  also please I need drivers for linux and windows xp

  Thank you

  Hello:

  The only other than W8/8.1 x 64 operating system that runs on your laptop is W7 x 64.

  You can use all the W7 x 64 drivers and this model on your software.

  Your model uses the AMD graphics driver. To install the AMD and Intel GPU.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278...

  If your laptop comes with the Ralink WiFi card, you need this driver bluetooth of Ralink and software, not one of the above model.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457&SP...

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I have Windows Vista Home Basic and I would like to install Windows 7 drivers vista with errors.

  I have Window Vista Home Basic and I would like to install Windows 7 then before as I do I have verify errors 4 of my drivers which are

  Microsoft ISATAP adapter #4 also #7 #12 #15 works not properly so I can update the drivers, then she come in saying.

  This device is not working properly because Windows cannot load the disks required for device error code 3.

  So if I can not fix it I can still install Windows 7. Please help because I need the urgency and I tried all week resolve the

  problems under Vista drives me crazy.

  Jean

  To begin troubleshooting, follow these steps:

  1. Make sure that Device Manager is open, and that the device that has the problem is selected. You can perform certain resolutions recommended by the Device Manager.
     1. Right-click my computerand then click Properties.
     2. Select the hardware tab, and then click Device Manager.
     3. Double-click the type of device that has the problem. For example, if you have problems with your modem, double-click Modems to see the devices in that category.

        A list of devices appears. If a device has problems, the unit has a red exclamation mark next to it. If a device is unknown (usually because of missing drivers), the device has a yellow question mark next to it.

     4. Right click on the device that has the problem, and then click Properties. This opens the device properties dialog box. You can see the error code in the State of the device of this dialog box.
  2. Use the Troubleshooting Wizard, if it is available, to help you diagnose and solve your problem.
     1. In the device properties dialog box, click the general tab.
     2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide. If the Troubleshooting Wizard is not available, go to step 3.
     3. Follow the resolution steps provided by the wizard to resolve the problem.
     4. Check the device status of the device properties dialog box to see if the error is resolved. If the error is resolved, you are finished. Otherwise, go to step 3.
  3. If the Troubleshooting Wizard does not have you helped to solve your problem or was not available, search for your error code in this article.

     Note If you cannot find your error code in this article, contact Support. To learn how, refer to the Microsoft Web site at the following address:

     http://support.Microsoft.com/contactus

     (http://support.microsoft.com/contactus)

  4. Follow the resolutions recommended for this error code.
     • Check the status of the device in the device properties dialog box area to see if the error is resolved. If the error is resolved, you are finished.
     • If the problem persists, unfortunately, this article did not resolve your problem. For your next steps, you can ask for help. Or, you can contact Microsoft Support to help you resolve this problem. To learn how, refer to the Microsoft Web site at the following address:
       http://support.Microsoft.com/contactus

• Problems installing windows 7 32 or 64 XP 32

  Hello

  I decided it was time to upgrade to windows 7 xp 32. I'm on an IBM Thinkcentre. I did a lot of research but cannot circumvent this problem.
  When I insert the cd when the computer runs I get an error message saying that:

  "This installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). »

  I know that it is common, so when I restart the computer and start the disc I meet another problem. It starts to boot from the disk and say for windows to load as soon as the loading reaches the end of the bar of the computer just stops and I can't do anything. When you start the computer again then turns off after a few seconds.
  Advice please? Thank you in advance!

  Hello

  You must follow these steps before you try to install Windows 7:

  Go to your computer manufacturer's website and check if Windows 7 drivers are available for your make and model.

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=TCTR-matrix

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon

• Satellite U400 - 12 p PSU40E - cannot install Windows XP drivers

  Hello!
  I U400 - 12 p, PSU40E, chipset: T5750
  I couldn't find the XP drivers.

  I found some drivers on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp:
  Product type: notebook
  Family: Satellite
  Product series: Satellite series U
  Model: Satellite U 400
  Short model No.: PSU40E
  Operating system: Windows XP
  ...

  But these drivers are not for the chipset T5750!
  I have sound installation errors, display, and almost all of the other drivers.
  Where can I find the drivers for my laptop (for chipset: T5750)?

  Help, please!

  Are you kidding me?
  I have a U400-10N and it belongs to the series of PSU40E too.
  I installed all XP drivers with no problems!

  And your chipset it NOT T5750!
  You chipset is * chipset Intel GM965 * and the * CPU * is * T5750! * Big difference ;)

  So I recommend the update of Windows XP to the last State. Update and install all MS patches and hotfixes and then try to install drivers XP of the page.

  Sorry, but it s 100% not a driver issue!

• Satellite A300-1 OC - problem installing Windows XP

  Hi all!

  Faced with the need to install * Windows XP * on my * Satellite A300-1OC. *.

  Here's the problem:
  the * pilot integrated distribution OS for the SATA downloaded from the Intel site.
  When you install XP no problem, but * when you drive where to install the system all the drive letters got mixed up *.
  As it has already established a system, the * laptop starts sometimes hang on for 2-3 minutes, then again normally.* operating

  Help solve this problem and recommend the correct SATA driver for my computer.
  And I would like to hear the difference, * if I set BIOS compatibility mode or leave AHCI.*

  + Thanks in advance. +

  Hello

  Please, read here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52625&TSTART=30

  It may be useful for you. The topic starter had the same problem, it instaled windows, compatible mode, and then extract the driver of the exe files.

• Satellite A200-23W: problem installing Windows Vista

  Hello..

  I now that this topic is discussed several times before, but after trying many solutions of the forum and some of my only, I reached a level that it makes no sense...

  First off I would like to explain what I do for a living, it has to do with IT and that is what makes it even more tempting for me.

  2 days ago a friend bought a Toshiba A200-23W. The first thing I always do when I buy a new laptop is to format it and install a clean Windows operating system.
  After my first attempt, I realized that I have to install first the matrix storage driver.

  I downloaded the driver from toshiba place related to my model. (Intel Matrix Storage Manager - 7.5.0.1017).
  I created a usb key with the required driver files:

  iaAhci.inf,
  iaAhci.cat,
  iaStor.inf, iaStor.cat,
  iaStor.sys, and
  TxtSetup.oem

  in the folder (F6flpy) of the (Intel Matrix Storage Manager) you can copy them to the root of the USB stick.
  When the form "Where you want to install windows" windows Vista appear I select load the driver, and then by clicking (Browse), I select the USB drive as source for my drivers.
  The (Intel(r) 82801HEM/HBM SATA AHCI Controller) will automatically appear as a choice and by clicking on the (Next) the process of the pilot installation begins.
  So far so good..

  Here's where things get complicated...
  When Vista back to the form "Where you want to install windows", even my system has 2 x 200 GG HDD only 200 GB HARD drive appears in the list...

  Selections of 'New' Partition, or a Partition of 'Delete' are disabled.
  and even when I click 'Next' for selected HD a windows message:

  "Windows has no determine if this computer contains a valid system volume."

  I'd appreciate your help...

  Thank you in advance...
  George P.

  Hello

  You cannot format the HARD disk or delete the partition because this would remove the SATA driver too, and the HARD drive would not be recognized by Vista!

  Therefore, you need to install the OS on the HARD drive that is displayed in the installation program.

• Problem installing windows XP on the IdeaPad G550

  Last week, I bought lenovo G550. It came with Windows Vista. I want to install Windows XP on it. I found that lenovo has driver for windows XP, which will make my life easy :-) But when I try to install windows XP last night, I got blue screen several times. I get a blue screen after Windows XP loads all drivers (status winidow in installing windows XP displays "Starting windows xp setup") and he pours (blue screen). I ran chkdsk and diagnosis of memory and both went really well (not reported no error).

  Is someone else has encountered the same problem? I have a stupid mistake? Please help me

  Your response is much appreciated.

  Thank you

  Noémie

  Welcome to the forums

  You should maybe spend in compatible mode ACHI sata in bios yout and check again