Problem installing Windows Vista Service Pack 1 (KB936330)

Similar Questions

• Problem installing Windows Vista Service Pack 1

  Greetings,
  I've been running Windows Vista for a while now. In general, I have no problem. I tried to install Service Pack 1 with a bit of luck.

  My first attempt was to install using Windows Update. When it installs it gives me error 0 x 80070490

  My second attempt was to install it as a Sandalone by Windows.com. He also gave me an error
  0 x 80070490

  I followed the instructions at http://support.microsoft.com/kb/947366.
  I tried all resolutions and nothing will work.

  Both times when I try to install it, the bar fills up all the way and then fails (no reboot or anything else) with in a few minutes. It restarts what only it either just fails or not. I tried using safe mode and normal Mode.

  I tried to repair Windows to solve the problem. While the repair done, the computer has restarted and gave me the 'blue screen of death', the only way he could properly load was to load mode without failure. I had to wrap the last know configuration to start normally.

  I'm running out of good ideas please help

  Desperate, try: http://support.microsoft.com/kb/947821
  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system

  Usually, the tool is available to computers that could benefit from these tools, but you can manually download the same and see if it helps.

  Unfortunately with your error code, it is usually a necessary repair install, but the damage may be too much even for a repair installation.

  BTW - back up your important files just in case where you don't have to start over.

  TaurArian [MVP] 2005-2010 - Update Services

• Impossible to install "windows Vista Service Pack 1 (KB936330) - Code error 800F081F & put to several other issues

  Kept having the same error code while performing updates 'window '.

  Similar error problems when updating: -.

  (1) Internet Explorer 8 for windows Vista - error 8007071B
  (2) KB973923 - 643 error code
  (3) KB973688 - 643 error code
  (4) KB954430 - 643 error code
  (5) KB973525 - 8007371B error code
  (6) KB951847 - code error 80073712

  Thank you.

  Hi, Jessie

  My dose in your other thread (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/26f384b4-c937-415c-bc08-19db6f46d38f) solve this problem, too, or...? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Guard of the Important Windows Vista Service Pack 1 (SP1) Windows Vista Service Pack 1 (KB936330) asks me to install after several successful installations

  Whenever I start my computer, the Windows Update icon is asking to update "Windows Vista Service Pack 1 (KB936330) Important Windows Vista Pack 1 (SP1).

  After several successful installations, the icon appears again with the same 'application for installation.
  Under the "updates installed", he said several times that the update was successful.
  Any remmedies or recommendations or is this normal?
  It all started after I reformat my computer.

  Hello

  Check to make sure that it is installed by using this method, there are Service Packs for other different applications that must also be installed >

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not installed, then choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And as appropriate >

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  See you soon.

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• My Windows Vista Service Pack 1 (KB936330) will download but not install it on my PC.

  My Windows Vista Service Pack 1 (KB936330) will download but not install it on my PC.  Clues on how to install?  In addition, SP2 is eventuallu\y installation.  Should I still SP1 so had installed SP2?

  Hello

  1. what anti-virus software do you use?

  2. What is the exact error message that you receive?

  Service Pack 1 is a prerequisite for installing Service Pack 2. It could be the Service Pack 2 for some other day.

  Reference:

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• Windows Vista Service Pack 1 (KB936330) fails to install error code 80073712

  Windows Vista Service Pack 1 (KB936330) fails to install, get the error code 80073712. What can I do to reslove it? Have tried everything help section offers any avile.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366>

  UTC/GMT is 03:21 Tuesday, January 10, 2012

• I installed windows vista service pack 1 and now problems

  I installed windows vista service pack 1, and now it will not connect to the printer and I have no sound! I've updated the drivers of the two, and they work both according to their status of device but no sounds or printer connection. Help, please.

  Once solve you the problems with SP1, you can then start of SP2.

  How to resolve problems that you experience after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948187

  Important: things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  and - how to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

• Windows Vista Service Pack 1 (KB936330)

  I have a toshiba laptop with windows vista. I am trying to install the update: Windows Vista Service Pack 1 (KB936330) and I get an error code 80070002. Help, please. Thank you

  Hi jaded13

  Thanks for posting on Microsoft Answers.

  Please take a look at the link below regarding the error code you get
  http://windowshelp.Microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx

  If please post back and let us know if it helped to solve the problem - thank you
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Service Pack 1 (KB936330) continues to be offered in Windows Update

  Original title: Windows Vista Service Pack 1 (KB936330) has installed 15 times during 2-3 days, and I still get notice to install again. Why?

  I recently used recovery disks to replace my system as before he was not stable and often froze. Since then, I get updates, all installed correctly, but I have problem with Vista Service Pack 1 (KB936330). Do not know what is the problem with the installation, and how can I overcome even? Would you be so kind and help me? Thank you.

  Elizabeth Nedeczky
  E-mail address is removed from the privacy *.

  My problem has been resolved, turns out I tried to download the wrong version. My PC is an autonomous one, and for reasons unknown to me, I chose the Service Pack1 for 5 languages. Had a discussion with a friend, maybe something he said... in any case I went back to the site download and tried Service Pack1 for 1 language! Has worked as a

  Charm. After the installation of Service Pack 1, all the others were easy.

  My sincere apologies. And thanks a lot to the Team of Microsoft and and al.

  Elizabeth

• Error Windows Vista Service Pack 1 (KB936330)

  I have Windows Vista and I tried to download Windows Vista Service Pack 1 (KB936330), but when I do I get an error message, "WindowsUpdate_80071A91" "WindowsUpdate_dt000"

  Hi Isaac,.

  Please contact the Microsoft Community Forums. I understand that when you try to download Windows Vista Service Pack 1, you get an error message indicating "WindowsUpdate_80071A91".

  Follow the steps for troubleshooting steps.

  Method 1:

  I suggest that you run repair.

  Check out the link to run repair.

  The problem with Microsoft Windows Update is not working.

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  I suggest you link and perform the steps of troubleshooting from the link.

  How to troubleshoot the installation of the service pack, Windows Vista and Windows Server 2008 issues.

  http://support.Microsoft.com/kb/947366

  WARNING:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  I suggest you link and perform the steps of troubleshooting from the link.

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the issue still persists after completing the steps of troubleshooting from the links and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• Unable to update the Code of error - Windows Vista Service Pack 1 (KB936330) -: 80070017

  original title: could not update - Windows Vista Service Pack 1 (KB936330)

  Impossible to update - Windows Vista Service Pack 1 (KB936330)

  Installation status: failure.

  Error details: Code 80070017

  Hello

  Please follow the steps mentioned below to help resolve the problem with the installation of the service pack.

  Method 1

  Start your computer in a clean boot

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you follow step 7 of the article mentioned above to set the Normal upward Start computer after troubleshooting is completed.

  Try to install the service pack.

  Method 2

  Run a System File Checker tool

  http://support.Microsoft.com/kb/929833

  Method 3

  Reset the contents of Catroot2 folder / rename the software distribution folder

  Step 1

  Reset the contents of the Catroot2 folder

  a. type the following commands and press ENTER after each command:

  ·         net stop cryptsvc

  ·         MD %systemroot%\system32\catroot2.old

  ·         xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

  b. remove all content of the catroot2 folder, but do not delete the catroot2 folder.

  c. type the following command and press ENTER:

  net start cryptsvc

  d. close the window command prompt

  Step 2

  Rename the folder C:\Windows\SoftwareDistribution

  a. open a window prompt administration commands.

  b. run the following commands and press ENTER after each command:

  ·         Net stop wuauserv

  ·         CD %SystemRoot%\System32

  ·         Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  ·         Net start wuauserv

  Try to install updates again.

  Important When you use this method, the following problems occur:

  ·  Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·  When you remove the Software Distribution folder, your download history is deleted.

  ·  If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  Restart the computer and verify if you are able to install the Service pack.

  Method 3

  You can also run as the automated fix this program to reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Method 4

  Alternatively, you can try to install the stand-alone version of the Service pack and check if it installs fine

  https://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  Hope this information helps.

• Windows Vista Service Pack 1 (KB936330) Error Details: Code C0000005

  Hello

  It has been moving my mind for days, and for this reason, I have to reinstall Windows 3 times in the past week.

  All I want to do is to install updates to SP2. This making, so made my computer crash due to updates do not.

  I have 32 Failed updates in my journal.

  I have this error when you try to install Service Pack 1

  Windows Vista Service Pack 1 (KB936330) Error Details: Code C0000005

  I have googled this error with no luck and few answers on how to repair this error. It is a necessity for me to install Service Pack 2

  on my work related and personal computer use. and I can't seem to find it.

  If anyone has answers as in why this error occurs, PLEASE let me know.

  NOTE *.

  I do not check my hotmail account. If you want to send me an email with the help, my email address is * address email is removed from the privacy *.

  Thank you in advance for the answer or resolution

  I do not have anti virus on my computer programs...

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my laptop is messed up after installing Windows Vista Service Pack 2

  My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
  Help!

  Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

• Windows Update installed Windows Vista Service Pack 1 KB (936330) three times

  Although three times, Windows Vista Service Pack 1 has been installed, Windows Update still says it's an available update.  Information system does not indicate that it has been.

  What must I do to solve this problem?

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366