problem installing Windows xp 64-bit OS of LabVIEW 2009

Similar Questions

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Satellite U500 - problem installing Windows 7 64 bit

  Hello

  I just bought a U500 laptop and am trying to install the 64 bit version of windows 7.
  It is obtained in the section "Installation program starts Services" and comes with a Setup error saying that the laptop needs to be restarted.
  When it is restarted it comes up once again with the error and keeps looping through.

  7 the window was on the HARD drive when I bought and was the first option to install when the laptop started upward. There is a recovery disk, but it degrades to XP, something, I'm not keen. I tried to reboot in safe mode, all three options, nothing helps.

  Any help would be much appreciated.

  > the window 7 was on the HARD drive when I bought and was the first option to install when the laptop started upward. There is a recovery disk, but it degrades to XP, something, I'm not keen

  I put t understand that said you the Win 7 64 bit was preinstalled, but the recovery disc contains Win XP?

  As far as I know, the most recent series of laptop is preinstalled with Win 7 64 bit and the recovery disk contains the Win 7 32 bit there is also a preinstalled Toshiba Recovery Disk Creator that allows you to create the own recovery with Win 7 64 bit OS disk

  However, if the laptop was preloaded with Win 7 then a HARD drive recovery option should be available also. Turn on the device, press F8, select Repair computer mu then Toshiba HDD recovery
  This should start again Installing Win 7 64 bit

• Problem installing Windows 7 64 bit

  Bought a Windows 7 home premium 64-bit, the laptop does not allow installation needs, 32-bit, how can I fix this with out having to go buy another package with 32-bit?

  Laptop is a HP Pavillion DV6 notebook currently loaded with vista.

  I have an another complete windows 7 64-bit office cd that is loaded on my other laptop I install using this cd and just put in the new serial number for the package first home?

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• HP Compaq 6005 Pro small format: error installing Windows 7 64 bit

  I install windows 7 64 bit, an error message, please guide me how to solve this problem

  

  thainguyenvl

  Hello;
  
  Let me welcome you on the HP forums!
  
  Unfortunately, the image you posted does not in the forum - then please provide the error text.

  We can proceed once you provide the information.
  
  Thank you

• Can satellite A100-011 - I install Windows 7 64 bit?

  Can you please tell me if I install Windows 7 64 bit where can I find the drivers, because they are not listed on the Toshiba site.

  Thanx.

  Akis

  Hi Akis,

  > where I can find the drivers, because they are not listed on the Toshiba site.
  That of the point because the drivers provided for this model, you can find on the official website of Toshiba. There's no other place where you can download the pre-tested and official drivers for Toshiba laptops.

  Theoretically, there s no problem to install Windows 7, but you don't have to search the drivers yourself on other sites like:
  [www.intel.com]
  [www.realtek.com]
  [www.atheros.com]
  Etc.

  An alternative you can try 64 bit Vista drivers. Usually they should work on Windows 7 too.

• Can satellite A100-003 - I install Windows 7 32-bit or 64-bit?

  Hello everyone,

  I have the Satellite A100-003 and I've been running it with Windows XP since I it (triple). Now I want to install Windows 7 on it, however, I'm confused about what can I install on it.

  I have a few places on the Toshiba site, I found that I can install Windows 7 (32 and 64 bit), but I can met some problems with the BIOS, in other places, I tried but could not find the drivers for Windows 7 64 bit.

  So what is the case? My first goal is to install windows 7 64 bit, because I have 4 GB of RAM on my laptop, but even the 32 bit would be a better choice than XP right now.
  So I can install Windows 7 64 bit on my laptop?

  Thanks in advance for any answer!

  Hello

  Important before installing another OS, you check the Toshiba driver download page. Satellite A100-003 belongs to the PSAARE series and is therefore not available for Windows 7 drivers. You can only get the drivers for Windows XP and Vista 32 bit.

  This means that you can try to install Windows 7 because Vista drivers most also work on Windows 7.
  If this isn't the case you find newer drivers yourself, maybe you can find something.

• Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

  Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

  And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

  Can someone suggest me the right version of the bootcamp software please?

  Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

• Installed Windows 7 64 bit but it lacks applications Toshiba

  Last Weeek I had installed Windows 7 64 Bit Version and I cannot find the following programs from Toshiba:

  (1) acoustic silencer
  (2) Toshiba Easy Media program for DVD
  TEMPRO 3)
  (4) SD utilities
  (5) utility password super visor.

  Please can someone help me on this problem and if possible could someone send me the full list of portable programs Toshiba just came out with.

  Thank you

  It will be nice if you can put this in your previous thread under http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=189703
  And we can continue the discussion here.

• Satellite A200-1YO - problems installing Windows XP Home edition

  Hi guys,.

  First of all I'm new here so Hello to everyone here and I hope you can help me with my problems of software.

  I recently bought a laptop model Toshiba Satellite A200-1YO provided with windows vista (which must be frank, pants and IMO too demanding for the machine) and I have a problem with vista, because some of its features do not seem to work, for example, I'm having a lot of trouble getting some of the webpages to open now, they simply hang out.

  now, I didn't install windows xp but I don't have an external floppy drive. This is not a problem but because I can use Nlite to integrate the drivers in a new ISO of Windows XP.

  The problem is that I have 4 sets of drivers: ICH7M_32bit, ICH7M_64bit, ICH8M_32bit and ICH8M_64bit. As I install Windows XP 32-bit while I'm more or less some that I have not need 64-bit drivers but when I install Windows XP by using the modified version of windows xp slipstreamed, what I get at startup is a BSD error telling me that something has crashed on my hard drive , however I can't say which crashed as the screen disappears after 15 seconds if that so I guess there is something wrong with the drivers I use (though I must admit that I'm not sure the drivers 32-bit to use)

  advice and assistance regarding being able to install windows xp would be welcome, as I said above, however, I can only use Nlite since I do not have a usb floppy drive.

  Satellite A200-1YO has a chip with the ICH8M southbridge Intel GM965.

  So you need the driver for SATA ICH8M_32bit.

• EFI system error related to... Cannot install windows 7 64-bit on lenovo g580...

  Hello

  I have Lenovo g580 which had pre-installed BACK inside {i5, 500 GB, 4 GB} and initially I had installed Win 7 32 bit on it. At that time, there was some problems while rebooting the 1st time, but I ran windows repair option and everything went well.

  But the problem came when I tried to install windows 7 64 bit on the laptop with a DVD, no matter which drive to choose, it only allows me to move forward. When I checked the details, I got the error message which is attached here.

  Link to image

  There is no option of disk controller in the BIOS, or anything whatsoever the UEFI systems tto.

  I did the r & d on uefi systems, but I want to be sure of everything until I get ahead of what it is.

  Any help would be appreciated.

  Moderator comment: images > 50 KB converted for programming. Community rules.

  Thanks for no help guyz!

  but I found a way... so for anyone else out there... Here is the solution...

  1. When installing to the partition screen, press SHIFT + F10.
  2. At the prompt, type diskpart and press ENTER.
  3. Type list disk (not the number of the disk to be used)
  4. Type select disk X, where X is the number of the disk to use.
  5. Clean type. This erases all data on your system.
  6. Type convert gpt
  7. Now reboot the system with the DVD/USB, and you will see only the unallocated space. Use to install the new windows.

  Be warned however, this clears the partition table on the disk; Make sure that you have a backup before attempting this, if you have important data

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Install Windows 7 64 bit and Vista 32 bit on the same drive

  I have Vista 32 bit installed on my laptop. Media recovery is on a recovery partition, I have no recovery DVD such as $85 for something that should be included with my expensive laptop anyway, it is a bit much

  I have a drive to upgrade Windows 7 from my laptop manufacturer that allows me to each upgrade or to start from scratch.

  I want to install Windows 7 64 bit on a separate partition for the installation of my 32-bit Vista, but when I boot on the DVD there is no option to select the 32 or 64 bit, it only allows me to install the 32-bit version. I have partitions installed correctly then they arnt the problem. If I try to boot from the recovery partition to install Vista 64 bit on a separate partition, to upgreade can leave, he simply don't say so, it doesn't allow the recovery or replacement of my existing Vista installation. Also, often when I boot to recovery mode, by organizing 0 start up, he simply waits some time and the Vista of boots in any case.

  How should I do to dual boot Windows 7 64 bit and Vista 32-bit, as all possible ways I have tried do not work, and I can't afford to buy the madmen of... Toshiba recovery media ?

  The 'disc Windows 7 from the manufacturer of your laptop upgrade' can be used to improve the qualification system of operating from 32-bit of Windows Vista that was originally installed on the laptop.  It cannot be used for any other configuration or purpose. Carey Frisch

  Actually, this isn't just a "upgrade drive" it's a full disc of Windows 7, I know that I can install full Windows 7 32 bit in a separate partition for Vista.

  The problem is solved in any case, I managed to hide my Vista (C) install with Acronis and boot to the WIndows 7 DVD. It then allowed me to install Windows 7 64 bit on the other Partition, because he did not think that 32-bit Windows Vista has been installed on the HARD drive. I managed to deceive it by showing the menu options of 32 bits or 64 bits in this way... I assumed it was a protection system put in place by Microsoft to stop upgrade problems if soemone tried upgrade Vista 32, Windows 7 64

  Now under Vista 32 and Widnws 7 64 on the same computer.

• I installed Windows 7 (64-bit) on my HP laptop. When I open a wizard, the point of the mouse frequently goes to the office.

  Hello

  I installed Windows 7 (64-bit) on my HP laptop. When I open a wizard, the point of the mouse frequently goes to the office.

  Example: If I type a URL in Internet Explorer the mouse point is for place in rear window (desktop) and I need to click on the URL bar to continue writing. It's frustrating to work.

  My first level of troubleshooting:

  Re-1 display drivers).

  (2) connected in safe mode and watched 5 minutes and has not seen the question. Seems the problem occurring in normal mode only.

  Thank you

  Vicky

  Hi Niranjan,

  Thanks for your reply. I tried some troubleshooting steps today morning and find the root cause of the problem.

  The problem with the driver for keyboard and mouse, so I uninsatlled form the machine. After the reboot, the problem disappeared, but my point of the mouse works slowly in any case I'm looking for the latest driver :)

  Thank you

  Vicky

• Installed Windows 7 64 bit - 4 GB / 3 GB usable, whereas with Windows Vista 64-bit - 4 GB usable

  Hello
  I have the Asus N70SV B1.

  Specifications: (http://www.asus.com/Notebooks/Multimedia_Entertainment/N70Sv/#specifications)

  No problems with Windows Vista 64 bit, recognizing the 4 GB of RAM. After the upgrade to Windows 7 64-bit 4 GB installed / usable RAM problem / 3 gb. I also checked the following.

  1. I am running windows 7 64 bit, NOT 32 bit, I wouldn't be able to run Adobe After Effects® CS5.5 and Adobe first® Pro CS5.5 elsewise.
  2. the unusable 1 GB of RAM is not used by the operating system, it's hardware reserved
  3. the video card Nvidia GT 130 m 1 GB, shouldn't need that RAM - it certainly didn't on the factory installed Windows he dedicated RAM.
  4. I tried disabling and enabling msconfig - boot - Max memory settings, no option solves the problem.
  5. He has no option of memory in the BIOS settings to disable the cache in memory / memory the occultation.

  * I had to use the 64-bit of Windows Vista sound drivers work correctly with Windows 7 64 bit. So I thought that the version of bios or Vista 64 bit can thus solve the problem usable 4 / 3 gb.

  * Yes, I have flashed the bios to Windows Vista 64-bit and that still does not solve the problem. Although the system seems faster, it still shows only 3 GB usable.

  There should not be a problem with this bios version seen only with the 64 bit Vista OS recognized all 4 GB.  I am confused and have no idea where to go from here.

  Please help.

  Hello

   
  I suggest you to contact the manufacturer of the computer for help.
   
  Thank you!