Problem is SharedWhiteBoard to work on tablets

Similar Questions

• A problem to stop windows work properly. This message appears after sudden auto restart.

  A problem to stop windows work properly. This message appears after the restart and sudden auto off.

  Computer: dell inspiron 1520, 32 bits, windows vista with SP1 & SP2, CPU 2 GHz, 1 GB of RAM.

  Concerning

  Firoz Martin

  Hello

  1 did you change on your computer?

  2. this problem occur only while playing games?

  3. what game do you play?

  Method 1:

  I suggest you to control in safe mode and run clean boot.

  Step 1:

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Try disable auto restart on system failure and check if you get an error

  Try last good configuration in safe mode and check.

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  I recently installed an Epson L555 instead of my Epson L355, which worked well with my software windows 7 and my BACK program based. However, whenever the L555 turned the printer just keeps ejecting the hopper pages until it is empty. On the menu screen, it says "printing", but there is nothing in the print queue and I didn't send anything to be printed. Sometimes it reads "Fax set auto answer. By pressing the Stop/Reset button stops the ejection pages and "Cancel" is displayed on the screen. This continues for about 2-3 minutes, then the pages start ejected again. Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  Thanks for posting your query in the Microsoft community.

  I understand that print jobs are getting cancelled and I will be happy to answer your query. There could be several reasons for this cause and to diagnose the problem, initially, I ask you to refer to the suggestions in the article below and check.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

  I've had my palm tx for 3 years now and I have had some problems with it. (because I bought it on the web, there was the guarantee) the first problem is the "power" does not work anymore? and the second, the scan goes blank (white) when I press one funds 4 (calendar or at home...). What could be the case of this defect?

  I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

  The warranty on a TX is only 1 year from the date of purchase.  Yours is way past the period covered.

  The switch was a small part of the TX.  Pressing any other button will turn on the unit, and it will turn off let it expire.

  There is a wire on the switch repair yourself, if you're a DO-IT-YOURSELF person here type:

  http://Forum.Brighthand.com/showthread.php?t=255871

  Have you tried a Soft Reset?  A warm reboot?  A Hard Reset?    Resets are explained here:

  http://KB.Palm.com and enter 887 'ID of Solution '.

  WyreNut

  Message relates to: Centro (AT & T)

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• I changed from a PC to a MAC and have reformatted my external hard drive with my photos.  Originally LR pointing the reader as reader J but now I can not use a letter.  Y at - it anyway to solve this problem.  My catalogue works fine?

  I changed from a PC to a MAC and have reformatted my external hard drive with my photos.  Originally LR pointing the reader as reader J but now I can not use a letter.  Y at - it anyway to solve this problem.  My catalogue works fine?

  In the library, go to the folders Panel, right-click on each folder of upper level and "updated to the folder location".

• Purchased by Lenovo App Shop app no longer works after Tablet factory data reset

  While exploring the Tablet do I tried the full device encryption and although I like the idea and safety, that is there are a few small enough reasons (not a subject of this thread) why I decided to go back to an unencrypted configuration. Interpreted data factory reset on the Tablet, just as it was before, re-installed applications that I had, and everything worked without any problem, for the most part. The a time-killer app, that I bought for those long hours on flights was the Angry Birds HD (free publicity) and once the reset Tablet app no longer works. When you try to start it I get is this message pop up:

  "We are sorry; It seems that you are not allowed to run this application. Please make sure that connect you to App Shop Lenovo to validate the app purchase"

  Well, it appears in 'My applications' Sub 'All' and 'Uninstalled' (which is weird, because it is really installed) tabs, I can download and re-install all this I want but I ever get is the pop-up message above when I try to run it. Not received any feedback from Lenovo App Shop for people in of the problem report, I sent, nor anything useful to MobiHand (at least they replied but with nothing more than a download link).

  Kinda stuck on this one at this point... There not so much the $4.99 ($5.99 CAD for a reason any), I paid for it, but it would be nice to have a running application or a refund, but if it is the standard of the apps purchased how to behave after a reset Tablet then we have a real problem...

  Still not sure, MobiHand people but what is the problem has been corrected and everything is good. At soon guys

• Problems of latitude 10 with Wacom tablet PC drivers

  I am the owner of a Dell Latitude 10 and last Friday, by mistake, instead of installing the driver with v720-10 recently published by Wacom, I installed the Asus with v720-9. As a result, the active pen no longer works correctly: when moving from the tip of the stylus on the screen, the cursor appears and disappears at random and never close to the tip. The stylus is now absolutely unnecessary and, because of his erratic behavior, it is completely impossible to calibrate it.

  To remedy, I restored it first my tablet to an earlier point in time and it does not solve the problem. Then I am in contact with the Dell Customer Service Spanish and they first had me install the latest versions of the pen drivers and, seeing that it does not solve the problem, they end by sent me a new digitizer in case it was a hardware problem, but this does not solve the problem.

  Then I refreshed the system without affecting my files, and because the problem persisted, I finally removed everything and reinstalled Windows 8 completely erase the data, but the pen still does not work. The rest of the Tablet is OK, even the touchscreen works well.

  Now, I do not know what more I can do in order to get the digitizer repaired. In another forum, I have been informed that the version of Wacom Tablet PC with v720-9 ruins of the pen on the Tablet sensor (Latitude 10 is one of those who may be affected) and that the only solution would be an update of the firmware from Dell. Can anyone confirm that this is right? Is it possible to fix it?

  Hi @HBEN,

  The update of the firmware is available for you at the following address:

  https://dl.dropboxusercontent.com/u/4818467/Wacom%20Soluci%C3%B3%20-%20WTW%20FW%20update%20FW0233.exe

  Here are the installation steps:

  -Uninstall any driver from Wacom
  -Run the update tool
  -If the update tool indicates 'No response' then update, do not close the tool, it works in the background.

  I was told it would auto close when it's over. In my case, it appeared an error message. I waited for two or three minutes, and after restarting the tablet pen came miraculously alive again.

  Good luck

• Strange problem of displays Web Works SDK (SDK detected Incorrect)

  I have no problem installing the sdk on another computer but at home on my XP machine after installing the AIR sdk, and then try to point to him when to install the web works package she complains an Incorrect SDK.

  I got the SDK in the same place as before http://www.adobe.com/products/air/sdk/

  and got the web works package to the: https://www.blackberry.com/Downloads/contactFormPreload.do?code=DC727151E5D55DDE1E950767CF861CA5&dl=...

  Anyone got any ideas as to whats going on?

  Ah... That's the problem...

  Adobe has changed its web page so that the AIR SDK 2.6 at this link.  If you follow the links on the page to donwload WebWorks SDK updated, you should get the link for the SDK 2.5

  http://us.BlackBerry.com/developers/Tablet/WebWorks.jsp

• problems with diashow-widget on my Tablet

  The widget for my photos on my site of Tablet works great in preview. online on the page under the picture, there is a big white gap and I only see the visuals in half. When I scroll the photos become full. So what's happening? Please can someone help? I have almost everything tried yet...

  thnx liz

  Thanks Peter to answer it quickly, but finally I have solved the problem. I've "pinned" the visuals of slide show on the HOME page.

  BTW, it's quite strange because exactly the same Tablet site (but an earlier version), which is now online: www.larive-almere.nl does not need to be "pinned" and I can use the exact browser fill. So don't know what is happening at the moment to MUSE?

• Problem with navigation on the desktop, Tablet and phone menu

  I created the website www.yorensa.nl to desktop, Tablet and phone. In the overview of the site, the navigation menu does not work properly.

  Office: When I choose the "news" button, I can't navigate any further.

  Tablet and phone: Navigation does not work.

  I published the site by ftp, so you can take a look.

  Please help me solve this problem.

  Hello Lena,.

  This has been answered here: http://forums.adobe.com/message/5802805#5802805

  See you soon

  Parikshit

• Pop-up - interactive PDF does not work on Tablet

  Hello

  I make an interactive PDF with pop-up functions. When I export the PDF file, it works fine

  on mac and windows. Only when I open the PDF file on a Tablet the pop up buttons refuse to work

  for the rest, the PDF works fine

  someone knows how to solve this problem, or what may be the problem?

  GR,

  Rick Smink

  'Mac' and 'windows', and 'on the shelf' doesn't mean anything at all. It's PDF viewing software that makes the difference.

  Support for advanced features of PDF on tablets is notoriously bad. Read http://indesignsecrets.com/finding-the-best-tablet-pdf-reader.php and related links that are there, it lists a few readers with different abilities...

• Problem installation file test on Android Tablet

  I'm having difficulty to visualize a folio on a Nexus 7 tablet. I created a .apk file and installed on the device. When I run the application splash screen appears, but then just a gray screen follows. A few details:

  • When I created the .apk I double fact that the ID of the application/product was the same in the Folio producer and what I entered in the App generator. (I had a similar problem when I was testing on the iPad. The product ID of dual control solved the problem.)
  • The device has wireless access.
  • I use InDesign CS6 and the last set of desktop tools.
  • I use the latest version of the App Builder (2.4.0) DPS.
  • I tried specifying the version of the viewer 23 and 24. None worked.
  • I tried specifying a strict interpretation for Android 7 "devices. He has not made a difference.
  • I use an ID from Adobe that is unique to this Android folio Builder. I used this ID ID title.
  • The folio was published in private and free.
  • The folio downloads and works as expected when viewing through the content viewer application.

  Thank you.

  For the folio to appear in your application, you must publish in the form of 'Public', so publish as 'Public' and 'free '.

• I would be able to remove Firefox and come back to my original browser if there is no problem with it on my RCA Tablet?

  I just got a very stripped down Android tablet, which is all that I need. The browser is not exactly feature rich, but I don't want to lose if the Firefox browser does not work on the tablet.

  sl215 Hello, of course - install firefox on android will happen besides the default browser that is already on the device and will not affect it. If this does not work for you, you can easily uninstall the application again through google game store.

  Getting started with Firefox for the Android Tablet browser