Problem LED

Similar Questions

• Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  On the desktop, you can open the Action Center under the taskbar > maintenance > view reliability history > view all reported issues

  You can right click on some of the mistakes "Stopped working" "Internet Explorer" > view technical details

  What are the details of the errors?

  There is a 'Copy to Clipboard' link at the bottom.

  Paste the information first in Notepad and then copy the Notepad information to post here.

• Problem led to keep

  Hello

  I'm on it, I'm like 2 months when I started learning on my own account, by now, I create a software in Labview to move 3 engines, just that I had a problem, I tried using 2 round LEDs for each axis (a when the engine is moving in the positive direction) and the other on the negative.

  So I have like 6 LEDs, now, the real problem started when I need to keep the LEDs on, I mean for example I push on the positive X the light and in a few milliseconds, it turns off. But what I need, is that if I press a button the corresponding LED should keep on until I pushed the other.

  I added the part of the game when I try to add this feature, can hope someone can explain to me a little or even help me to what I do.

  Thanks for any help

  Your query is really a matter of LabVIEW and would get more response if validated for the jury of LabVIEW. It is not a matter of circuit design and this advice gets much less activity than the LV Board.

  The key is the shift register to keep the values of one iteration to another.

  You will need a change of register for each LED. If you don't want 6 registers at offset, you could combine the data in a table or a cluster so that a shift register would be sufficient. Since you are a beginner with LabVIEW, I suggest that the separate passage records until you are more comfortable with LV

  Since the two entries (buttons) and outputs (LEDs) are boolean, it makes sense to keep the data as boolean overall.

  The labels on the block diagram display makes it much easier to keep track of what terminal is connected to what button or LED.

  Connecting to the switch case structure you should use integer data types rather than floats. In your VI it does not matter, but if you were to calculate the result with a division or other functions round forced to integers internally in the structure of the case could cause problems.

  Consider the use of the Structure of the event to meet the changes in the buttons. According to me, which was introduced to LV before your version 7.1.

  Here's a way to do what I think you want. I post a picture because I can't save in version 7.1. Note that I suggest do a Subvi repeated code. By making a Subvi, you just change it one place if you find a bug, or changing requirements. The code has 6 copies, which would need to be changed.  I did not remove your code so that I can compare the results.

  Lynn

  

• How to use the COM (RS-232) port to control the problem LED Panel in LabVIEW

  Hi all

  In my new project, we need display text using the RS232 type LED panel.

  1. is this love order LabVIEW support standard RS-232 Telnet Windows?

  2. my LED Panel does not support VISA, LabVIEW supports another way to send a command to the COM port?

  Thank you.

  Kind regards

  Robert

  
  

• Problem led the TweenEvent event.target

  Hello

  The logic of the code is as follows (pseudo):

  function X {}

  switch

  (1) tween1-> tween finishing launch onTweenFinish();

  (2)-> finishing launch onTweenFinish() tween tween2;

  (3) tween3-> tween finishing launch onTweenFinish();

  ]

  and now AS3:

  int onTweenFinish(e:TweenEvent):void

  {

  trace ("Motion event triggered");

  trace (e.Target.Name);

  }

  results in: ReferenceError: Error #1069: the property name not found on fl.transitions.Tween and there is no default value.

  What I want is to treat all the interpolations of three in one function, but I need to know what tween it was. It is of course possible to make three separate functions, one for each tween, but it's just not good.

  Any suggestions?

  Thank you

  Maxim.

  You could test to see who it is...

  function onTweenFinish(e:TweenEvent):void

  {
  if(e.currentTarget == tween1) {}
  trace ("tween1 triggered event");
  } else if(e.currentTarget == tween2) {}
  trace ("tween2 triggered event");
  } etc...

  }

• Problem starting my desktop computer

  Hello

  I would appreciate if you could help me on this.

  A few days ago I took my uncle s old Acer Aspire T180 upgrade. It did come with a hard drive, but I got an old Toshiba hard drive which I plugged it in to see if it works.

  (Card: 512 MB of RAM, AMD Athlon)

  Problem 1) is where the problems began to occur. Startup Repair has not solved the problem. I tried to use the system repair and restore backup options, memory diagnose or Toshiba HDD repair and other options failed.

  I thought that it was the hard drive, so I ordered a new hard drive Toshiba from Dell.

  Problem 2) after installing the new hard drive, it says «verifying DMI pool...» Disk boot failure. "

  After searching online, he leads me to the next solution I need to reinstall Windows 7.

  Problem 3) I found the product key on the side of the desktop "Windows xp media Center 2005" and I tried to get on Microsoft, but it was rejected.

  Then I found a download link for "Windows xp media Center 2005" I thought was an OS like windows 7 and downloaded on a usb key.

  Problem 4) using the. ISO file, I tried to boot to the desktop through F12, however, the system is stuck on the message «verifying DMI pool...» »

  These are the problems I have encountered, and try to counteract the problems led me to the other issue.

  Please help me.

  Thank you

  Salman

  PS. I don't have the disc of windows 7 or any other disc that came with the desktop computer.

  And my product key does not work.

  Hello

  The most common cause of this error is an incorrect order of boot devices in BIOS. Or the HARD disk is damaged. A hard drive may become inaccessible due to read/write errors, failures or damage of virus attacks. What I can suggest is for you to follow the instructions given by Greg Carmack via this link.

  This should help get your query with «verifying DMI pool...» Disk boot failure"set.

  Let us know how it goes.

• Send an email to some non-visible personal folders {solution}

  A search for this problem led me to https://support.mozilla.org/en-US/questions/1002714 , but the solutions proposed in this thread do not work.

  An update of XP (outlook express) to 8.1 Win.

  On old machine imported Outlook Express with success in TB, moved profile new machine to win 8.1 where this problem occurs.

  (Redirected the .ini file, but only discovered a) of many files, while showing, containing no e-mail, and b) some files have no subfolders. Check using Explorer directly in the profile shows that all e-mails are in their correct place.

  The consistent factor is what folders that have any Japanese text in their names (TB is the English version) are those who do not show e-mail (or display all of the subfolders if they have). i.e. the folders display correct Japanese names, but they are empty. Any file written entirely in email fine English poster (also subfolders content display and fine).
  E-mail written in Japanese display well in these cases an English name, so it seems to be just the names of files that cause this problem.

  Moving files with Japanese characters in their 'Outlook Express Import' folder to subfolders of Inbox on TB on XP PC, then the new transfer profile has no effect.

  I don't know if it's a question of 8.1 to win but it seems that more than a bug in TB?

  First attempt at solution is to rename the Japanese records into English and see if it works. It will be tedious if anyone has other ideas, please advise.

  Thank you very much.

  As I suspected, change folder names to English (or enter on a single byte ascii?) has solved that problem.

  I'm marking as "solution" found as I always believe it's a bug any.

• Firefox crashing and stuttering during video playback

  It is clearly a problem of Firefox. I went through all the help screen and suggestion (usually for me to check things that worked perfectly the day before) I finally find something that worked for me - I've disabled 'FT Deep Dark 10' tab 'appearance' - video stutters is more - although the fact that I had this theme installed for about a year with no problems led me to where I started... It is clearly a problem of Firefox.

  wooddragon45.

  Thanks for the reply - doesn't look like I've found a cure then, but it may be instructive in narrowing the possibilities - it may well have been a crash, possibly a FT DD 10 update report... just too busy at the time to spend the time to beta test, just need my software to work...

  However, I'll post if I find something useful...

  wooddragon45

• After 3 attempts of my presario c700 gives me this no.85374984 with system disable

  Compaq Presario c700. Problems led me to problems even more. Started with 'DPS' won't start do not. Unsuccessful attempts, generalized to have to re install. But the PC doesn't let me do many things. Dependencies DPS, .eg; can not save, fire wall, no work, etc. now with win 7 on hard workout machine gives me. Bootmgr missing and I can not access bios to change the boot order. Admin wants P/W? After that 3 attempts .i have a clΘ; disable the 85374984 system.

  Try to enter 30052300

• DV7-4177nr: HP laptop dv7-4177nr Caps Lock flashing solid button wireless

  This HP laptop was not start correctly. After some research, I came up on top of the problem LED blink/beep codes and was hoping to use this page.

  The problem is, on my laptop, the Verr Maj light constantly blinks and doesn't stop, unlike on the problem page code where it says he should stop to give me an idea of what the problem is.

  In addition, the LED light on the wireless key is a solid red color. After several attempts, I can't find anything about a flashing infinite caps lock and a solid red light.

  I tried the hard reset, when I remove the battery and the AC adapter and press and hold the power button for a long period of time. I have also reinstalled the RAM sticks. I even took the CMOS battery and replaced.

  If possible, would be just a system board/motheboard failure? I heard that if I take on the RAM and try to turn on/off the unit, the unit should beep at me because it does not recognize the RAM, but in my case, it is not a sound signal.

  Any other ideas?

  Hello @ToeKnee616,

  Welcome to the HP Forums!

  I understand that your HP Pavilion dv7-4177nr is not start properly and you have tried various troubleshooting steps to resolve the issue.

  Looks like you follow the proper document to solve the problems. Based on the consistent blinking, it is most likely a single wink indicating the failure of the CPU.

  Computers laptops HP - computer will not start and emits a LED or a beep Code

  Maintenance and Service Guide will have more information on the type of motherboard is your computer.

  HP Pavilion dv7 Entertainment PC Maintenance and Service of Guide

  Thank you very much, I hope this information has helped.

  If this post helped you, show your appreciation by selecting the thumbs up!

• Windows disabled remote access to my wireless printer

  My printer is connected wireless to the computer at home (so a 'network', I guess).  But the recent problems led me to authorize remote technicians, and apparently, as collateral damage, my printer does not print now.  At one time gave a convenience store, I found a statement that "Windows has denied access to distance", but I can't find out how to restore remote access.  Printer is now installed, and the work and watch as the default printer, with options for "start printing immediately.

  Anyone know how to force Windows to restore remote access to my computer to the printer?

  Thanks in advance

  Rich

  Hi rich,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Uninstall and reinstall the network drivers.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  For reference: printer in Windows problems

• FGV in packed lib cause leakage

  Since an update of a project of LV2009 in LV2011 it became a problem.

  This is the message we have received:

  

  With the conversion we also converted the LLB used to a LVLIBP.

  The problem led us to this LVLIBP and a dynamic call to a FGV in a VI belonged to the LVLIBP.

  The error is a bit misleading and strange and always occure around iterations 1.040.000 +

  We have stripped the project down for a demonstration project.

  
  

• Photosmart 5520: alignment went to pot

  After having unplugged and then plugged back, my photosmart 5520 is now completely out of alignment, when I go to print my labels Avery. I did the test print and recalibrated but it makes no difference - can anyone help?

  It wasn't the rollers, but a response prior to a similar problem led me to disable default "duplex printing" option and for some reason it fixed the problem and all my labels are now centered and looking fine.

  Thanks anyway.

• Window and the mouse crashes when you try to close the windows

  Original title: window crashes when you click on the red X

  I use Windows Vista Home Premium (64-bit platform).  Just recently, when I right click on the red X in the upper right to close a window, the window and the cursor freezing for about fifteen seconds.  The window then closes, and the slider works normally.

  This happens to my office, although my laptop (same operating system Vista, except for the 32-bit version) works normally.  I use CCleaner on a regular basis, and I have the latest version of AVG anti-virus and Microsoft Security Essentials installed.  This Setup has worked well for over a year.  This problem appeared only in the last 24 hours.

  Gordon

  Houston, Texas

  Hello, Mr. the President Y. K..

  First, as soon as the computer and then restarting it later in the day, the question has not repeated itself.  I had read on Google that people with this problem a couple of years, were not so lucky.

  I have not addded any software, except to perform Windows updates usual a week ago.  The suddenness of the appearance of my problem led me to believe that these patches were probably not at fault.  When I went to log on to this second time, I had planned to restore the system to a previous backup to see if that gave me work around the problem.  However, it was not necessary.

  No error message appears when the problem occurred, and the problem was if I was in the office or on the Internet.  Nevertheless, I intend to register your comments useful diagnosis for later use, and for your efforts, thank you very much!

  Kind regards

  Gordon

• 4632 HP Officejet printer: hp officejet 4632 printer stuck printing alignment page

  Help please.  My printer is stuck trying to print an alignment page.  I can't scan or copy anything to the printer.  I tried unplugging the printer with power, has waited more than a minute, reconnected and it did not help.

  I tried the scan doctor and she also did not help - Alternatively found printer was 'busy', or scan doctor tried to print an alignment first page and is stuck there. If I "jump" impression of the alighment with doctor to scan page, it prints a test page, it finds everything works "ok." "" "." Print alignment page"bypasses to jump the"print alignment page"printing, and yet the screen of the printer still says 'now printing alignment page', is stuck and I can't always copy or scan anything from the printer.

  I would greatly appreciate any suggestions I tried to solve this problem for several weeks.  Thank you.

  I think I've just fixed this problem after 3 weeks.  I actually tried the doctor print because it seemed to be a printing problem.  I just tried the scan doctor, he finds problems, led me through steps and printing and scanning seem to work now.  Phew!  That took much too long to fix, but glad it works again.