Problem management and the memory of the LR catalog

Similar Questions

• x 1 problem management and the supply of the carbon battery

  Hi everyone I x 1 carbon 3448

  in these 3 days, I have 2 questions:

  1. There is a warning sign on the right side of my battery meter tells me mya battery capacity is less than 50% of its original capacity.
  2. I can't open the power manager at all. even after the update today, it solves nothing.

  Please help now my laptop cannot survive 30 minutes without load

  You run Windows 7?

  Reinstall the power manager, and then run a battery meter reset.

• How to get around the Startup Manager and the black scree at startup

  tried to deactivate the boot manager of arise to stat upward by going to advance settings and put the 'the operating system display list' to zero. However, the Boot Manager always appears at the star for a few seconds and then the screen goes black and possibly windows vista starts. What can I do to work around the Boot Manager and the black screen at the star to the top? I tried the system recovery option, but it didn't work. Can someone help me?

  Thank you

  Hello

  I suggest you to see link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-default-operating-system-for-startup-multiboot

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• Satellite L30: Watch DVD problem - slowly and the sound is distorted

  Hello!
  I have a Toshiba laptop Satellite L30-115. I use WinDVD preinstalled to watch DVD. everything was fine until yesterday. Since then, my DVD drive seems to have problems with playback of DVD movies (original).

  It's a little slower that should be, and the sound is a bit distorted. The same DVD my laptop no problems to play now, it seems impossible to play properly.

  I tried system recovery to date, everything was good, but that did not help.

  Everything's fine, when I play movies from my hard drive, but apparently my DVD Player cannot play fair.
  I tried various combinations (turn on/off digital playback in Device Manager), but nothing seems to work.

  No idea how to fix?

  First of all, give it a try with cleaning the lens of your DVD player. Several times a lens dirty or CD/DVD that makes impossible to correct read causing delays.
  Because the movies read from the HARD disk correctly, it does not seem to be a related problem of codec, but... you should still try to use other DVD player software to ensure that WinDVD is not the source.

  I suggest you also to keep longer, to install software of reduction of CD speed during normal use of all the days of the life of your drive. As you know, the disc spins a lot faster than actually required inside the car which complicates the procedure for reading (especially on the scratched CD) and consumes more energy, too.

  Reduce speed solves problems like the one you have several times. Here is a link to the Version of acoustic silencer of TOSHIBA 1.00.008 (from page of the pilot satellite L30), give it a try:

  http://support.toshiba-tro.de/tools/satellite/sl30psl33/XP/acoustic-silencer/acsil-PSL33-XP-100008-en.zip
  (This software runs independent you have European/American version of laptop L30, even on a different model as Satellite Pro 6100 a.s.o..)

  Kind regards
  chain

• WOW kept is disconnection on home premium Windows 7 problem! and the error on the map of Ndivia.

  I already deleted WTF, interference and file cache and still issue of disconnection and I read card window update ndivia had error on update because that's not 32 bits, it suppose to be 64-bit.   It remains a problem.  Please help me to solve this problem of disconnection on world of warcraft.

  I'm with window 7 home premium and using Ndivia Genforce 6158 THE.

  Hello

  Rather than update the Nvidia card drivers on the system, I suggest you to uninstall the drivers as well as software from the Device Manager and then download the drivers for Ndivia 6150 THE on the Nvidia site and install it on the system and check.

  a. Click Start and type device manager in the search box start and press to enter. This will open the Device Manager window.

  b. click on the graphics card, then right-click on the driver and then click on uninstall.

  Note: Place a checkmark near the uninstall software with the driver to remove the software.

  c. download the NVIDIA drivers from the link below and check.

  Windows 7 32 bit

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  Windows 7 64 bit

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

  Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

  Steve, run Bios secondary ck drive it passeds all tests.

  Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

  When I click on computer is not there? Why

  No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

  Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

  Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• I have download important problems, extraction and the implementation of the evaluation version of Acrobat 11.  I am very frustrated and annoyed about this, because I need this immediately.

  Someone help me please get this done.  I desperately need to get there.  Had a single file to come in error and the installation was blocked in the 'extraction' for more than two hours.  I realize the note said essentially Meanwhile please be patient, it will take some time.  I was working on this and my Mac Book Pro fully occupied with this total without the slightest trace of success more than 3 hours.  This is ridiculous.   Someone, somewhere please help.

  Send me an email to [email protected]

  You can try an alternative that does not involve the Download Manager.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  XI Pro/Standard of Adobe Acrobat and Reader: direct download links | ProDesignTools

• Problem area and the legend of zoom

  Hello
  
  I have a problem with the function of Adobe Captivate zoom area. I use the same slide a zoom area and some legends on the top of the zoom destination area. The problem is that the zoom destination area keeps appearing on the top of the legend, according to the configuration of the chronology, it should be behind them. Can anyone help?
  
  Cheers, Andrei

  Problem solved

  I just had to change the order of the legends, and now it's ok. I basically kept order as it was when the problem occurred: slide, layer of mouse, zoom area and legends.

  See you soon! Andrei

  Later edit... Thanks Rick for your comments... saw your post after I posted it.

• Difference between nio-file manager and nio-memory-manager

  Hello
  What is the difference between nio-file manager and memory manager Ian? The documentation is not really discuss the differences as far as I know. They all use two nio to store files mapped into memory Don't they? What are the advantages/disadvantages of both?
  
  When to choose the first and when the second during the storage of a large amount of data? Can be used to query data with the filter API? Are there any size limits on both?
  
  Best regards
  Jan

  Hi Jan,

  The difference is that one uses a memory-mapped file and used memory direct nio (as part of the memory allocated by the JVM process) to store data. Both allow data cached out-of-heap storage, which can store more data with a knot of unique cache (FMV) without long GC pauses.
  If you use a 32-bit JAVA virtual machine, JVM process will be limited to a total of ~ 3 on Windows and 4 GB on Linux/Solaris. This includes lots and out of the stack of memory allocation.

  Regarding the size of the limitations for the Manager of files-Ian, please see the doc the following for more information.
  With version 3.5, now is the idea of a Partitioned card support that allows to create more large (up to 8 GB of capacity) for storage of nio. Please refer to the following, doc.

  Both can be used to query the data, but it is worth noting that the index will be stored in the heap.

  HTH,
  -Dave

• Have recently reinstalled lightroom cc in 2015 and the lightroom catalog file which was in my pictures is not there

  Have reinstalled lightroom cc and the lightrrom folder that was in the pictures in my folder now isn't there?

  You must decompress the file compressed, as backup catalogs are in compressed Format.

  You should also check for the permissions on the images folder to read and write

• Windows vista cannot open network, the Task Manager and the windows system restore.

  I have problems with a computer, I'm trying to fix. It is a Dell Inspiron 1420 with windows vista. Whenever I try to open the networking or system restore, I get a window with a white screen. With this blank screen, it's like the computer is frozen, ctrl alt del, break the gel, but when I try to open the Task Manager, it would not come. Another problem is blocking down. Stop taking too long. (maybe 30 min)   I did research on the internet to find what could cause something like this and a way to solve these problems, but I came empty. Any information or suggestion would be useful.

  Hi Wiseman504,

  -How long have you had this problem?

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Step 1:

  Boot in safe mode with networking and see if the problem persists.

  See options (including safe mode) advanced boot for instructions on how to start in safe mode with network.

  Step 2: If the problem does not occur in safe mode, start your system in a State of clean boot (in normal mode) to solve the problem.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Optimize Windows Vista for better performance

  Ways to improve your computer's performance

  Method 2:

  Follow these steps:

  Step 1:

  Create a new user account and see if the problem is recurring in the account newly created.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  Follow the steps in the following article to repair the damaged user profile:

  Difficulty of a corrupted user profile

• Linksys WRT110 problems - Firmware and the blocking of Web sites

  First problem is that my Linksys WRT110 blocking some Web sites. I tried to get 1up.com and it times out. When I plugged my modem without the router I could access the site without problem. I checked www.downforeveryoneorjustme.com and it's on my end... I found a few solutions workaround, which eventually do not, such as:

  After you download the firmware, extract the files if its zipped.

  Connect to http://192.168.1.1 router.

  Leave the user name and password admin

  Click administration and then search for the file (.bin)

  Wait for the upgrade, then reset and reconfigure the router.

• I use the vista sp2.the Task Manager and the registry editor has mysteriously disabled. How can I activate them?

  I am running vista sp2 and my task manager has been disabled by the administrator. I checked help and he said that I had to enable it via the registry. When I tried to open the registry editor, he said it has been disabled by the administrator. Well, I am the administrator and I've never disabled anything and I don't know how. Can anyone help.thanks

  I also discovered that I can not use the command either line. It is also disabled.

  Hi Mark,
  I know that you said you have linked the virus scanners, but this looks like an attack on your registry... or at least the dll that open your registry database.
  Did you go back with the restore points?
  Sounds like it might be time for a complete wipe and load (format).
  B Eddie