Similar Questions

• RV082 v4.0.0.07 individuals and access rules NAT problem

  Hello

  I just bought two RV082 to run a 20 computer and office web server 4. I use special NAT to public IPs are mapped on different servers and our monitoring system and it seems to work very well. For each address of individuals using a NAT, I created the following access rules:

  Allow HTTP WAN1 everything [PA]

  Allow SSH WAN1 everything [PA]

  Refuse all WAN1 everything [PA]

  Allow rules are of a higher priority so my experience with other firewalls suggests that they should be applied first blocks access to all ports and ports HTTP and SSH then would be open. What seems to be the case is very disconcerting, with any rules applied Allow refusal rules are removed completely open all ports. If I move the priority of rule Deny it blocks all ports, as expected.

  My question is how can I prevent access to all ports except ports HTTP and SSH with the router in NAT mode specific.

  When an access rule is set on a NAT 1 rule at 1, you want to change the public ip address to the private IP which is mapped to the public ip address.

  Allow to use HTTP WAN1 everything [private address]

  Allow SSH WAN1 everything [private address]

  Refuse all WAN1 everything [private address]

• Problems to make the access rule for a NAT device work

  I am new to Cisco routers so light easy on me.

  Our company has just purchased a RV042G so that we can start using VPN for some of our sales representatives.  There is always a need to access the RDC to configure our WAN1 port access rule to the internal server.  However, it does not work.

  I have install this type of rule on Sonicwalls before, but I don't have much experience with Cisco.  I'm a bit confused as to why it doesn't work anymore.  Any advice would be great.

  Service = DRC (3389)

  Source port = WAN1

  Source IP = our static IP address

  Destination IP = 192.168.0.250.

  What I am doing wrong?

  Hello Eric,

  Looks like you got the first step made so fare. How access lists works on this devices is actually just control/allow certain traffic but does not in fact of NAT/port forwarding. What you need to do is then go into the setup and go under transfer. Next, you will create your port forwarding it. You click on service management again to set up which port you must sent (it may be already there for when you have configured your access list). Some of them should be similar on how you implemented in the access list, but if you want more information let me know and I can give more details.

  Hope that helps out.

  Thank you
  Clayton Sill

• LRT224 not getting firewall access rules do not honored

  Hello

  I use LRT224 with firmware version v1.0.5.03 (February 22, 2016 10:12:17). After that I had the camera that I have updated to this version, done a factor reset and started the same configuration.

  I have defined four VLANS, connected my WAN link, everything is configured. Each port is assigned a VLAN which are connected to different switches. When connect us computers to each of these VLANs, we become appropriate network DHCP address and are able to surf the internet properly without any problem.

  I have two or three machines in VLAN2 whereby, I want to install the virtual host configuration by using Port Forwarding.

  I'm trying to map the port 8801 to port 22 on a server in the VLAN2, and so I can SSH to the server from the outside.

  In the Port Forwarding, I created a new service for 8801 and using this service, I defined a redirection rule to this server in the VLAN2. I've also set trigger Port 8801 to 22. Also open the port 8801 by adding an access rule to the firewall configuration.

  Despite all this, I can't access this internal server from outside.

  I had a similar configuration before with a Dlink WiFi router and there it worked perfectly fine. Thus, there is no problem on the server.

  I also tried Port Address Translation instead of triggering Port, still unable to connect.

  When I do a port-scanning of my external IP address for port 8801, it looks like below:

  For print.blrhq.public (xxx.xxx.xxx.xxx) nmap scan report
  Host is (0.0031 s latency).
  SERVICE OF THE PORT STATE
  8801/tcp filtered unknown

  Not sure if the firewall is contributing to the show or the configuration of port forwarding.

  In this regard, any help is appreciated.

  You only need the translation rule addresses port. Remove port forwarding rule.

• RV042 access rules

  I have a port forward for a port (say 3299). I also have a Wan access rule allowing all traffic from several IP ranges to access the local network.  Other wan access is refused by the built-in firewall rule.  However, I can still access the port forward despite this.  What I have to do a rule specifically for the port to allow access to the range of IP addresses and blocking everything else.  I thought that the integrated Wan rule deny it, everything, everything, always treat that...

  Thoughts?

  Hi, I thought the same as you before, but I had the same problem with my FTP rules.

  Because you did a redirect rule, you create also allows some first IP you want access to this transfer and later, you must do a deny rule for this redirection service that rejects everything after tent.

• Help! RV042 access rule

  Good day to all...

  I have set up my purchase new RV042 router, in the access rule, I deny all the services of the source is Lan and WAN are. My concern is that I want to allow LAN to access the internet, so i ' ved create another rule allowing http, https. but my problem is that I can't access the internet. Please help me what other services associated with http, https to access the internet.

  Thank you.

  The denial of access rules is the latest rules?

  • Better plug the screen to check.

• Problem with access policies (create several resources)

  I'm having a problem with access policies:
  
  The first policy must create a resource.
  And the following policies should create childs on the resource.
  
  The problem here is that when the policies will add the childs, the resource is not configured yet.
  And then each will create a resource but I want just a single resource of the childs.
  
  
  When the resource is already deployed, policies to update this resource correctly.
  
  How can I fix?
  
  TKS

  Ricardo,

  I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
  The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
  The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

  I hope this helps.

  See you soon

• I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

  I downloaded Safari 10 and now every page that uses Java asks me to activate or not. How to avoid this new feature? I have problems to access my bank account.

  I think they mean JavaScript.

  In your Safari menu bar, click Safari > Preferences and then select the Security tab, and then select: Enable JavaScript

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Increasing problems to access web pages in Safari or Chrome

  Hello. I have a Mac Mini 2.5 GHz, 4 GB RAM, 500 GB HD; running Mac OS x 10.11.2; Safari 9.0.2; Sophos AntiVirus Home Edition 9.4.1; Chrome 49.0.2593.0 dev (64-bit).

  Several months ago, I started to have problems of access to some web sites, namely OpinionWorld and your voice. I would get an email from them with a link, like http://dkr1.ssisurveys.com/projects/start?psid=s_LXqAJmxx3JVOk_yTSTvgBEHjCAUQLr>, and when I went to access I got error:

  400 bad request

  Your browser has sent an invalid request.

  so that I could access these sites from my mother did investigations using his computer and Windows 10 machine. I had the same problems in Safari or if I pasted the links in Chrome. After some time I also started having problems with other websites such as Amnesty International. I would like to click on a link such as al http://www.amnesty.org.au/action/action/41035/?utm_source=FBPAGE&utm_medium=soci & utm_content = 20151220043000 & utm_campai... > and he'd make the same error 400 Bad request. I took it to the Genius Bar for an appointment and after a long period it check and tries to connect to some of these sites from another Mac and my mom on my Mac Mini account, that the Apple employee said it was a problem with sites and not with my computer, but problems encounter on the other computer and even on my mother's account were different. On the other machine, it seemed that someone else had bought the areas OpinionWorld and your voice and I forgot what happened account of my mom, but it wasn't a 400 error. Also, it didn't explain why I was able to access it on a Windows 10 using Chrome for Windows machine. Also, it was just the links OpinionWorld and your voice, not links to Amnesty International etc.

  Sometimes, I would have similar problems with other sites. Sometimes I could open in Chrome but not Safari, or if I clicked on the link it won't work but if I pasted the link and press return it would work. More recently, I was not able to access the site with Safari iTunes feedback feedback/itunesapp.html >, he just said:

  Bad request

  Your browser has requested that this server could not understand.

  Reference #7.ebb7d117.1450593610.0

  I receive for several sites these last time. Also although when I accessed this site through Chrome, it worked, when I had finished my comments he tried to go to http://www.apple.com/feedback/itunesapp_thankyou.html> where he got another 400 error but when I went there now it worked.

  Also when I tried to access the first link in this post just recently I received:

  403 Forbidden

  Request prohibited by law.

  in Safari. Previously I would have uninstalled and re-installed Safari and Chrome, but apparently it is like an option with Safari.

  Can anyone suggest what should I do then? Thank you for your consideration.

  Can anyone suggest what should I do then?

  He doesn't know what is the problem but "Sophos" is capable of anything beneficial and his presence will only complicate troubleshooting. Remove it. Back up your Mac before making changes to its file system.

  Use the Remove Sophos Anti-virus program. It will be installed in the Applications folder on your Mac, unless you have moved or deleted. In this case, follow the instructions in uninstalling here: https://www.sophos.com/support/knowledgebase/122710.aspx. Ensure that its eradication is complete and irrevocable from your system. Do not reinstall, or something like that. Only then will you be able to solve the problems you are having.

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• I get a message that says that I do not have access and enter an administrators password

  I have a desktop HP running windows XP.  I get a message that says that I do not have access and enter an administrators password.  I am trying to download a virus software.  I noticed that the security of the window manager warned that no virus software has been found.  It doesn't let me do.  I own the computer how do?  Are there real ideas that will actually work so I can get control of my computer?

  * original title - cannot control my computer.  Don't know password * administrator

  Hello

  1. have you logged as administrator?

  2. how many user accounts you created on the system?

  Follow these steps and check if that helps:

  Method 1:
  I suggest you try to scan online antivirus in your computer and check if it helps:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  Method 3:
  Try creating a new user account and check:
  http://support.Microsoft.com/kb/279783

  It will be useful.

• Since an update to Adobe Flash Player (10.3?), I had many problems to access web sites and play 'videos' on them.

  Since an update to Adobe Flash Player (10.3?), who apparently is not 64-bit capable, I had many problems to access the websites and "videos" by playing on their. There is also a special site that charge but the screen displays a full blank page. What can or should I do? The adobe site indicates that the new application does not support 64-bit, but it doesn't seem to be a solution for it or the option of returning to the previous flash drive that was no problem.

  Hello

  Read this interesting information and use the 32-bit IE browser:

  'http://kb2.adobe.com/cps/191/tn_19166.html '.

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / unchecking the Google Toolbar download option there.

  http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

  The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?

  There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?

  This is the title of each and they run exe:

  Internet Explorer
  "C:\Program Files (x 86) \Internet.

  Internet Explorer (64-bit)
  "C:\Program may Explorer\iexplore.exe.

  One runs IE in the "Program Files (x 86)" folder, this is the 32-bit version. The second is the 64-bit version.

  http://kb2.Adobe.com/CPS/000/6b3af6c9.html

  Trial of Adobe flash 64-bit

  http://www.ehow.com/how_4670030_adobe-Flash-bit-browsers.html

  Read the above article on the 64-bit browsers

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/babaa5f8-FF06-4EA2-aef6-a9416d65f981

  Read the above information about Flash and 64-bit browser by PA bear MVP"

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.