Problem of backup recovery

Similar Questions

• Aspire switch 10 factory backup recovery

  Performed factory recovery backup on USB 32 GB, such as recommended by the Aspire manual switch of 10 who said "a minimum of 16 GB of space would be needed.  Instructions on the required 8 GB just says Backup screen. Backup actually resumed only 5.8 GB!  Back up again in another 32GB USB drive to check it & took only 5.8 GB.  Neither the manual nor the backup screen are seemingly correct as to the amount of space is required. Why this discrepancy?  I don't know if I have a good backup, or not since I'm only 5.8 GB on my USB on both of my attempts. Had a similar problem with backup drivers & Applications.  Manual says it may take several DVDs, but backup screen indicates that a single disc, or about 0.33 GB.  This backup twice and both times I got on my key USB was a shortcut for 1 KB for the 'resource centre', whatever either!  Has anyone else had similar results.  It would seem that two backups could be made on a 8 GB USB key if my results are correct.

  Yes, there are some differences on the recovery of the backup.

  I suggest you to use the windows built-in 8.1 instead of the Acer erecovery utility.

  You can make a complete image of the system, so you don't have to reinstall everything (programs, settings) on a USB key and create a support to boot from USB and re - load the image of the system and help you solve problems starting recovery.

  I suggest you do a system image when you have all your programs installed and tested the system is stable.

  Recovery drive:

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  complete picture of the system:

  To open System Image backup

• Deactivation of Dell Backup & Recovery Notifications

  We have a number of new PC (Win 7 Pro 64 bit) who all Dell Backup & Recovery installed. Now, I take that uninstall completely is not a good idea because of the way it is strongly linked to do system recovery / restore? So, how the to I turn of the annoying notifications! I don't want to hear/see anything about this piece of software! Especially since most of the notifications are 'NAGs' about 'try our cloud services' (I don't want them), or "upgrade to the pro version" (NOT a chance). They are opinions only in so much as they try to me I don't want to sell.

  Hi, due to problems in communicating with you, here I called Technical Support this morning (Dell case Ref: 895569609). They were able to confirm that, after you create a recovery on the USB media, had no reason why I couldn't just go ahead and uninstall Dell Backup & Recovery. They also confirmed that when you access Backup & Recovery via the Windows Start menu troubleshooting (accessed via F8 as Windows starts), it is run from the hidden restore partition and not affected by the uninstall of the Windows software itself. That's what I've went ahead and did to get rid of notifications. What about George

• How to make the backup recovery onboard cd - dvd burner drive

  How to make a backup recovery drive cd - dvd drive integrated with windows 7 Professional?

  How to make a backup recovery drive cd - dvd drive integrated with windows 7 Professional?

  You can do a repair disk or an image of the system - the two are below.

  Create the system repair disc

  1. Open backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.
  2. In the left pane, click on create a system repair disc and follow the steps. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Create a System Image in Windows 7

  After you install and activate Windows 7 create a system image as a backup of your current computer in case you need to reinstall it. This will restore your computer to its exact state when the image has been made - which will save you the trouble of having to reinstall Windows 7 and installed everything currently again, and it takes much less time to do.

  1. click on the Start Menu and type "Save", and then click Backup of your files.

  2. in the Control Panel window that appears, click the blue link to the image.

  3 create a system image window should pop up.  Select which hard disk, DVD, or network location, you'll save your image.  Click next to continue.

  4. on the next page, check disks in your system and your system for.  Once you have selected the drives, click next to continue. Note: You can select as many records as you want (if available), but you choose to include means to the greater will be the size of the image.

  5. the next window is just a review, make sure everything is correct, and then click Start backup to start the process.  It may take 10 minutes or more, so patience is needed.

  6. once the backup is complete, you will be asked with the option to create a system repair disc.  It's a good idea, just in case your system has problems in the future.  Click Yes.

  7 choose which drive to record the disc you use to burn the disc.  Insert a CD or a blank DVD for the physical disk, and then click on create disc.

  How to restore Windows 7 from a System Image

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

• Backup & Recovery in virtual environment

  Hello

  I need help to establish a good Backup & Recovery Strategy for VM-Ware with Oracle databases.

  Currently we use veeam backup the entire Virtual Machine during the night maintannce-window. On the virtual machine, we use RMAN to back up the databases, archivelogs fall under the machine.

  My problem:

  -If the virtual machine failure during the day, for example 16:00, cause of lost storage / instant failure that blocks the machine - I lose changes all day.

  So, where is the best place to save the logs to check-in during the day and how do I recover after an accident mentioned above? First step would be to recover the virtual machine with veeam, but subsequently? The database do not know what archivelogs were written, cause it contained last night?

  Thanks for your help.

  PS, we got the problem of the snapshot-crash on another machine, so it's really a thing that can happen.

  User106somethingorother,

  If you want to be able to recover in the case of the virtual machine / virtual disks are gone, you must ensure that your backups and archiving logs copied somewhere else.

  The users guide backup and restore (available at http://docs.oracle.com) would be the place to go to find out how to recover the database in many different scenarios, including one where you have lost direct control files and RMAN would therefore know about archiving logs is available.

  Kind regards

  John

• Using more of a VMWare backup recovery

  Hi all

  I'm sitting here und think next idea:

  We have 10 servers that must be saved. We use a VDR (VM Backup Recovery) for this. Thus, sometimes the catalog crashes and it takes neerly a day to fix it. While this time I can´t of backup or restore anything.

  These backups are on the same SAN as my ESX machines. So I have the big problem, if everything crashes (raid or more than 1 HDD) I have no chance to recover anything.

  Yes, I know that this is not 100% optimal. either way... we have no money to buy a second SAN!

  the idea was to develop an other VDR and connect it to a Terastation. Speed is absolutely secondary. This VDR would save computers same like the first VDR. (not at the same time, for example SQL Server is saved on VDR1 on VDR2 and 06:00 on 09:00)

  The biggest would be:

  -If VDR 1 catalog crashes, VDR2 works and I can fix the VDR1 without missing the backups or recoveryoptions

  -If my STI SAN crashing, I can use my Terastation to fix everything (the speed is secondary)

  What do you think of this idea?

  Good bye

  Andy

  You can define 2 different backup locations in a single device. So you can save on Monday for the first location and Tuesday for the second and so on. When an integrity check runs more than 24 hours, you have the second location-data store to restore on the same device operations. If you have enough backup-time, you can also save each VM twice in one day in two places at different times. In the event of a disaster you will be lucky and maybe lose only a location of data store and have all your backups without waitiing for the completion of the audit of integrity or something as a recataloguer. Up to now this works very well in my environment with 5 appliances and 180 VM. I use no more than 30 virtual machines for a single device, because integrity, check runs throughout.

• There is a problem of backup applications to iTunes to my new iPhone 6 s. apparently, there is an error that says that the applications could not be found. Why can't I make the backup?

  There is a problem of backup applications to i Tunes (previously synced from my iPhone 6) to my new iPhone 6 s. apparently, there is an error and the applications could not be found. How to solve this?

  Are the 6 and 6 times on the same iOS?

  ITunes is also the last version 12.3.3?

• Install the new hard drive, I have no os or backup recovery disks

  I have a HP G62-340US notebook pc-product # XH066UA #ABA, OS is windows 7 64 bit.   The hard drive does not work so I'm relpacing with a new.  I have no os disks and any backup recovery.  When I turn on the laptop there that peripheral black splash screen States 3FO hard drive not found.

  My question is that I don't know what drives I need to order at HP to reformat my laptop.  Again, I have no backup disk or any disks. I lost everything on the laptop. which is ok.  So it's like I'm starting with a blank slate.

  Should I order the kit Media Ststem recovery for consumer notebook, which is a set of 4 discs?   and that's all that I need to install to return to the State wherever it was when I bought it new.  Are there other discs that I need to order or just that?

  Thank you very much for your help.

  Hello

  You just order a SET of recovery disks and this disc set will bring your machine to update 1 than why we call back to factory settings. Please check how to order from the following link:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• Creation of backup recovery disks

  Hello Forum,

  When you use the backup recovery disc creation program, is a copy of all the recovery disc (d created or are the files from the (c drive also copied?)) With this drive, I'll then be able to restart my laptop with a new hard drive.

  Thank you very much

  FM.

  Hello

  While the recovery discs are just a bootable copy of the recovery partition D, operating after replacing the HARD drive, it will reinstall all the original scores (Windows C, HP_TOOLS, recovery D etc.) on the new drive - the machine will be in the State it was at the time of purchase.

  Kind regards

  DP - K

• Problem creating a recovery on HP Ultrbook

  Hello

  I tried to create a collection set on my HP Ultrabook for months.

  The procedure works well until I need to insert media. This is the problem because the media is not able to reconginise even if the same media has been used to back up my file on the same lap all the time.

  The media have a lot of empty space (about 150 GB)

  I can assess the documents in the media

  Now, this problem could be critical because I might need to engage in the recovery, due to several errors that occur at this time.

  See you soon

  EUB

  Hello

  Looking at the free space you mention for this media, am I correct in assuming that this is an external HARD drive?

  If that is correct, then this is what is causing the problem as the recovery media creation application does not support creating a recovery on an external HARD drive media, you will need to use a (usually 32 GB) usb flash drive.

  Kind regards

  DP - K

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Create a backup recovery

  Is this possible on a drive hard laptop usb or should it be a flash drive?

  I thought to partition my drive hard portable 1 TB and dedicate it to the backup recovery.

  Thank you

  No, you need to save in a flash disk to bootable USB, you can back up an external HARD drive and retrieve the image with programs like daughters reflect.

• Using a USB flash drive for backup more driver and application backup recovery

  I have a 32 GB flash drive I used to create a recovery for my Aspire S7 backup using Windows 8.1. I understand that in creating this backup everything on the flash drive is deleted before creating backup. Can I now use this drive for other purposes, e.g., pilots and backup applications, pictures, documents, etc., or this flash drive now should he remain dedicated to the sole purpose of being a backup recovery?

  Hi zimmerbob

  I keep as a backup to dedicated recovery flash drive and use one for drivers & applications.

  It is always wise to keep the recovery discs, as well as the recovery disks. Flash memory is quite inexpensive for the moment!

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Netflix in WMC «there was a problem of data recovery...» »

  I installed the latest round of updates (Ultimate) of Windows Vista and it apparently burst Netflix in WMC.  Now, I get the error:

  "There was a problem of data recovery. Make sure your internet connection is working and try again. »

  Internet works on the machine.  I reinstalled Silverlight (v4) and Netflix for WIndows Media Center.

  How to diagnose and repair the problem?

  Thank you!

  Keith...

  Sorry for the delay, but I've been busy (in my free time) trying to get this to work.

  I gave up trying to resuscitate MCE and installed a brand new Windows Vista Ultimate Edition with Service Pack 2.  After apply all WIndows patches and installation of Silverlight, I have the "Netflix" element in MCE.  He invites me to install, what I'm doing.  However, every time I start MCE and go to Netflix, he tells me to do reinstall - no login screen.

  I tried all the "mcupdate" article and then supported your steps above, but no go.

  I did this twice, so it wasn't just a fluke.  Apparently, the part of Netflix to MCE is not detect the plug-in that it installed.

  Any thoughts on what to do then?

  Thank you again...

  Keith...

  Later: I ran "mcupdate" after the steps you suggested, and now Netflix is gone again!

  Later: same problem on my other computer running MCE and Vista.  I don't want to mess up this computer so I left as what.

  Later: opening of a new post on problems become Netflix to work with a clean install.