problem of cluster-in-a-box

Similar Questions

• Problem VMDK file large cluster in a box

  So I've been running a flavor of vmware server 2.x since its release with little or no problems. Not that it matters but my host server is a Dell Poweredge 1900 with 32 GB of RAM, running windows server 2003 x 64.  I have also 2 Windows VM that I run as a cluster in a box, and they worked very well in this way for more than 3-4 years at the time of vmware 1.x. Both virtual machines have been set up exactly as such:

  SCSI 0:0 16GB & lt; - c drive

  1:0 500 MB & lt; - quorum SCSI cluster

  SCSI 1:1 12GB & lt; - the app cluster disk

  1:2 950 GB SCSI & lt; - storage of cluster disk

  SCSI 1:3) 12 GB & lt;-the sql cluster disk

  1:4 250 GB & lt; - disk SCSI storage of additional cluster

  What I did recently to set up a new file 2 TB since vmware server 2.x vmdk will now allow you to make files vmdk bigger than the old limit of 950 GB. This new 2 TB file was supposed to replace my 2 readers of old SCSI 1:2 and 1:4 SCSI cluster storage. After making the swap and copy all data to a vmdk file again, I noticed a problem at any moment I'm going to and move the resource cluster VMDK new 2 TB to the other server. Basically the two servers stop responding and it seems that vmware server choke on the 2 TB for some reason vmdk file any. Here's what I see in my logs any time that this happens.

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.953 02 Dec: vmx | scsi0:0: READ command (10) took 23,142 seconds (ok)

  01:21:47.968 02 Dec: vmx | SCSI1:2: READ command (10) took 45,504 seconds (ok)

  01:22:46.062 02 Dec: vmx | SCSI1:2: RELEASE (6) command took 5,235 seconds (ok)

  01:22:46.093 02 Dec: vcpu-0 | DISC: Resync'ing disc scsi1:2.

  01:23:08.593 02 Dec: vcpu-0 | DISKLIB-DSCPTR: open : 'storage3.vmdk' (0x6a)

  01:23:08.593 02 Dec: vcpu-0 | DISKLIB-LINK: opened 'e:\virtual_machines\storage\storage3.vmdk' (0x6a): monolithicSparse, 4194304000 sectors / 2.0 TB.

  01:23:08.593 02 Dec: vcpu-0 | DISKLIB-LIB: open "e:\virtual_machines\storage\storage3.vmdk" (flags 0x6a).

  01:23:08.609 02 Dec: vmx | SCSI1:2: READ command (10) took 22,527 seconds (ok)

  01:24:15.640 02 Dec: 1 vcpu. DISC: Resync'ing disc scsi1:0.

  Has anyone ever ran across this or has anyone ever used a file vmdk of this size as a cluster resource? As I said before that I had 0 problems with my cluster before I added this new 2 TB vmdk file...

  I'm not at all surprised that you get this problems.

  You use monolithicSparse vmdk type!

  For cluster in a box, I highly recommend flat VMDK.

  I wonder that it worked for you all with the drive more sharing

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• small problem with the printer dialog box

  I recently added a Brother printer to my IMac and ran into a minor problem.  When I put in place using my WiFi and AirPrint, the dialog box has a convenient box for the black and white that I was able to check in one easy-to-replace step and just print in color.  However, the alarm time and the answer is a bit slow.  So, I then plugged a cable and add this version of the printer.  Now the box is missing and nothing I've been able to do, to delete and add new printer allowed me to bring that?  Any ideas on how I can get this feature practice appears in the dialog box with the printer connected to the cable?  Thank you.

  If I understand correctly, you have now two entries separated for this printer to Print & Scan? It's OK, although AirPrint is better for various reasons.

  I understand the printer takes an unacceptable amount of time to wake up to when choosing the AirPrint printer, and you want to avoid this.

  If you have added a separate entrance - one for the USB printer connected - how who you? Did you leave the print & Scan install this printer automatically on its own, or did you download and install a driver of brother separately?

• software interface problem with "Band in a box."

  s PG music "band in a box" software having problem with El Capitan 10.11.3 operation?

  FWIF it there a number of Mac Audio products who do not appear as 10.11.x and normally I would say that the developers have months to understand, but there is only tools 10.11 maybe the question that companies like Line 6 the whispers have blogs of developer who said they worked with Apple but do not have a satisfactory solution. In the meantime, see if your product needs an update and that you are running a compatible version, otherwise consider do backward to a previous state of the BONE where the software worked properly if you have a backup Time Machine to restore from available for you.

  Use Time Machine to back up or restore your Mac - Apple Support

• Problem with the file dialog box

  Hello erveryone,.

  My problem is quite easy... I try to use the file of dialogue vi of NOR and its work properly, but when I select a file using the double click, the second click is detected as a click on my Panel of...

  Example, if the file I select in the local file dialog box is justa button on my Panel (under the pop - up), the action for this button is run...

  I tried to disable my front panel when you use the dialog box, but it doesn't change anything.

  Someone there had the same problem? Anyone find a solution to this problem?

  Thanks for the help,

  Fabrice

  Hmm... What's not here? When the file in the dialog selected with double-click, and then disappeared with the mouse down, so dialogue, your dialogue control receives the mouse upward:

  Double click: mouse-> mouse-> mouse downwards upwards downwards (here missing dialogue)-> the mouse upwards (you got it). Nothing wrong. Can be inconvenient in some cases.

  Andrey.

• Problem with FAX Setup dialog box

  When I start, a box dialog indicates that WIndows is trying to install a fax MACHINE and I have to go to the Manager end tasks now.  I don't want that, I didn't ask for it, I don't have the disc for it.  How can I get rid of him.  Microsoft doesn't make it easy to communicate with them.

  Hi Babs336,

  1. Did you the latest changes on the computer?
  2. Have you recently tried to install the Fax on the computer?
  3. When was the last time it was working fine?

  Method 1

  If you want to remove the computer's fax services, then try the steps mentioned.

  (a) click Startand then click run.

  (b) copy and paste or type the following command in the Open box, and then click OK:

  appwiz.cpl

  (c) it may take several seconds for your computer to compile a list of programs. The dialog box Add / Remove Programs opens.

  (d) click on Add/Remove Windows components on the left of the list of programs to start the Windows Components Wizard. This only lasts several seconds.

  (e) in the components list, clear the Fax Services check box, and then click Next. The installation program uninstalls the computer's fax services.

  How to enable and configure the fax service in Windows XP

  http://support.Microsoft.com/kb/306550

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Problem with dismissing the dialog box

  Hello world

  This is my first post here. Sorry if the question is very simple...

  I need to download an image on server. I display a dialog box to confirm if the file should be downloaded.

  Everything works well except that the dialog box is dismissed after that the whole process is over. I know I'm missing something-related threads. pls help me to understand.

  Here is my code:

  public void fieldChanged(Field f, int context) {
      if (f == addButton) {
                      FileSelectorPopupScreen fps = new   FileSelectorPopupScreen();
          fps.pickFile();
          theFile = fps.getFile();
  
          if (theFile == null) {
              Dialog.alert("Screen was dismissed.  No file was selected.");
          }
          else {
              UiApplication.getUiApplication().invokeAndWait (new  Runnable(){
              public void run(){
                  int confirmationResult = Dialog.ask(Dialog.D_YES_NO, "Do you                    want to upload?", Dialog.YES);
                  if (confirmationResult==Dialog.YES) {
                           status=1;
                  } else {
                           status=0;
                  }
              }
            });
  
          }
  
          if(status==1){
              Thread t= new Thread(){
                  public void run(){
                      //MY CALL TO WEBSERVICE                     }
              }};
  
              try{
                  t.start();
                  t.join();                                           refreshData(); //call to method to post the image data to server                        //and refresh the screen with new image
              }
              catch(Exception e){
  
              }
  
              }
          }
  
      }
  

  My problem is that the I selected YES the dialog box only after the call to webservice licensees are completed and the image is published on the server and the screen is refreshed with the new image.

  Let me know what I'm missing.

  Welcome to the forum!

  Correctly, you start the process of network on a separate Thread.  Then you attach the wire event for this Thread by using the following instructions:

  t.Start ();
  t.Join ();

  So you give up the thread of events not until your networking activity has finished.  It does not block your event feed so that your application will become unresponsive to the user and as you noted, activities requiring feed event, such as the removal of your dialog box, cannot occur.

  You must reprogram your treatment so that the activity of the network as a completely asynchronous operation.  You can't wait on this.  You should get to tell you when it has finished.  I suggest that looking at the observer model during the implementation of this process.

• Does anyone else have problems with tasks dashing ACS box

  This is the second time that I applied a patch ACS to one of our boxes of ACS SE 1113 only to happen in an unusable state. Today, I applied patch level 4.1.4.13.7 4.1.4.13.11. I used the GUI to apply the hotfix. Now most of the services will not start. Restore does not work. It seems that he will again have to be reconfigured.

  I was wondering if anyone else has had this problem. Maybe I should have used the command line to apply the patch?

  Randy

  You must apply CSUpdate first, then the patch for 4.1.4.13.7

  Kind regards

  Prem

  Please rate if this can help!

• Problem with the new text box - large size

  Hello

  I have a problem with InDesing and just can't understand why it's happening.

  When creating the text box (frame), I am selecting the text tool and want to drag a new text box, InDesing creates a new frame with size 1221, 058 x 1221, 058 mm (always, no matter what...). When I'm typing in it, the text is invisible, in the same way that it is out of reach of the size of the image (at the bottom right I see the Red Cross). It happenes even after hitting only one character and I can't make it visible (adjust to the right).

  Someone has any suggestions how to solve this problem?

  I will be grateful.

  System: Win 8.1

  InDesign worm. : output 2015.4 CC / 11.4.1.102 x 64 build

  Best regards

  Andrzej

  

  First try: 101 troubleshooting: replace, or 'trash' your InDesign preferences

• Problem of cluster Failover MS after physical RDM conversion to VMDK

  Hello

  Last week I had to migrate 7 x 2-nodes virtual MS Failover clusters to a new data center. All clusters have been configured with the configuration of the cabin and all shared disks were in physical RDM mode.

  The target data center does not RDM disks so I had to convert all RDM disks VMDK files and use config before the migration of the IPC.

  I used vmkfstools to convert VMDK eagdrzeroedthick RDM files.

  5 clusters have been migrated successfully, but two cluster got strange question even if the procedure for all groups was the same.

  So in two groups, I have a problem where the second node in the cluster can not put online some of the shared disks. The first nodes in the clusters have no problem with the disks/SSP.

  But when I try to failover of all services, the second node may not bring online disc 1 or 2 shared, even if she can put the other shared disks online.

  VMKernel.log is not errors or warnings. I checked the configuration of virtual machines and everything seems OK.

  Any ideas what I could check?

  Just in case anyone else is facing the same problem.

  I could not find the root cause of the problem, even if it's without a doubt the conversion that triggered the problem. However, we found quite a simple solution - added new shared VMDK files, copied the files over and replaced the defective discs.

• Report problems of cluster resource

  I'm doing a script to report on each folder in a vSphere as the amount of the capacity of the data center containing each file uses.

  It will be formatted in a csv file.

  I'm currently having a problem with "get-view viewtype - clusterComputeResource" I can't report on clusters within a specific data center. He blurts out every cluster in the environment!

  $server = Read-Host ' server:'

  SE connect-VIServer $server

  $report = @)

  $Datacenters = get-data center

  ForEach ($Datacenter to $Datacenters)

  {

  Write-Host $datacenter

  $DataCenterUsedCPU = 0

  $DataCenterUsedMEM = 0

  $DataCenterTotalCPU = 0

  $DataCenterTotalMEM = 0

  $row = "" | Select the Datacenter, totalcpu totalmem, totalstor, totalusedcpu, totalusedmem, totalusedstor

  $row. Datacenter = $Datacenter

  $clusters = get-view viewtype - clusterComputeResource

  #get - cluster - location $datacenter

  ForEach ($cluster in $Clusters)

  {

  #$clus = get-view viewtype - clusterComputeResource

  Write-Host $cluster

  $CpuCapacity = $cluster. Summary.EffectiveCpu

  $MemCapacity = $cluster. Summary.EffectiveMemory

  $CluCpuUsage = (get-view $cluster. ResourcePool). Summary.runtime.cpu.OverallUsage

  $CluMemUsage = (get-view $cluster. ResourcePool). Summary.runtime.memory.OverallUsage

  $CluMemUsage = $CluMemUsage/1 MB

  Write-Host "CPU...$CpuCapacity\\".

  Write-Host "MEM...$MemCapacity\\".

  Write-Host "CPUU...$CluCpuUsage\\".

  Write-Host "MEMU...$CluMemUsage\\".

  $DataCenterUsedCPU = $DataCenterUsedCPU + $CluCpuUsage

  $DataCenterUsedMEM = $DataCenterUsedMEM + $CluMemUsage

  $DataCenterTotalCPU = $DataCenterTotalCPU + $CpuCapacity

  $DataCenterTotalMEM = $DataCenterTotalMEM + $MemCapacity

  $row.totalusedcpu = $DataCenterUsedCPU

  $row.totalusedmem = $DataCenterUsedMEM

  $row.totalcpu = $DataCenterTotalCPU

  $row.totalmem = $DataCenterTotalMEM

  $report += $row

  $Folders = get-file-Type VM - NoRecursion-location $cluster

  ForEach ($Folder in $Folders)

  {

  $folderVMMem = 0

  $FolderVMCpu = 0

  $totalstor = 0

  $usedstor = 0

  $UsedCpu = 0

  $UsedMem = 0

  $row2 = "" | Select the data center, folder, usedcpu, usedmem, usedstor, totalmemVM, totalNumCpu, totalstor, NumOfdrives

  $row2. Datacenter = $Datacenter

  $row2. File = $Folder

  $VMS = get-VM-location $Folder

  ForEach ($VM to $VMS)

  {

  $FolderVMMem += $vm.memorymb

  $FolderVMCpu += $vm.numcpu

  $UsedCpu += [math]: round ((($vm |)) Get-Stat - Stat cpu.usagemhz.average - Start (Get-Date). AddDays(-7)-IntervalMins 60 - MaxSamples (20) | Measure - Object - average value). (Average), 2)

  $UsedMem += [math]: round ((($vm |)) Get-Stat - Stat mem.usage.average - Start (Get-Date). AddDays(-7)-IntervalMins 60 - MaxSamples (20) | Measure - Object - average value). (Average), 2)

  $HDS = get-disk hard - vm $vm

  $count = 0

  Foreach ($HD in $HDS)

  {

  $count ++

  $totalstor += [math]: Tower ($HD. ProvisionedSpaceGB, 1).

  $usedstor += [math]: Tower ($HD. UsedSpaceGB, 1).

  }

  }

  $row2.usedcpu = $usedcpu

  $row2.usedmem = $usedmem

  $row2.usedstor = $usedstor

  $row2.totalmemvm = $FolderVMMem

  $row2.totalnumcpu = $FolderVMCpu

  $row2. Totalstor = $totalstor

  $row2. NumOfdrives = $count

  $report += $row2

  }

  }

  }

  $report | Export-csv-path c:\temp\StateOfTheSphereReport.csv - NoTypeInformation

  Disconnect-VIServer-Server "$server" - force - confirm: $false

  Help for this specific problem, tips advice or something to make it a better script is appreciated. Also if you know a script that does that already it's much too.

  Try something like this for the clusters in a specific data store.

  $tgtDC = "MyDC"
  
  $dc = Get-View -ViewType Datacenter -Property Name,HostFolder -Filter @{"Name"=$tgtDC}Get-View (Get-View  $dc.HostFolder -Property ChildEntity).ChildEntity |where {$_ -is [VMware.Vim.ClusterComputeResource]}
  

• Cluster MS with VMFS - why only Cluster in a box of decision-making support?

  Hi all

  Ive been reviewing the KB of Microsoft Clustering on Vmware here: -.

  http://KB.VMware.com/kb/1037959

  https://www.VMware.com/PDF/vSphere4/R41/vsp_41_mscs.PDF

  And noted that VMFS is taken in charge for shared storage, but only clustered in a box configuration, so that the two nodes of the cluster are on the same physical ESX host.  Anyone know why this limitation is in place?

  Why can I not have a VM on different ESX host?

  See you soon

  Stewart

  It has to do with the fact that two ESX / / ESXi hosts cannot access a VMDK at the same time - that of why a Cluster across Boxes can use a VMFS fo the VMDK quorum data store and data shared VMDK.

• Problems to AutoFill a text box

  Hello

  I'm trying to fill in a text field with 'Yes' or 'No', based on the value placed in another text field. If the value [textfield 1] is greater than 0, I want a 'no' to appear in [text field 2] and if the value of [textfield 1] = 0, I want a 'yes' to appear in [text field 2]. If [textfield 1] is empty, I want [2 textfield] empty. I put the following code in the custom calculation area of [textfield 2]:

  var a = this.getField("textfield_1").value;

  if(a=="") event.value = "";

  of other if(a>0) event.value = "No";

  else if(a==0) event.value = "Yes";

  Currently if the value of [textfield 1] is greater than 0 'no' appears, but if empty field remains the value of [text 1 field] = 0. I don't know why that is. This code worked for me before when the conditions of value are different. Is this something to do with the value of 0?

  I would like also to other fields are visible when [2 textfield] is met with a "no" in the box and hidden when [text field 2] is filled with a 'yes '. This is the code I used in the custom validation script:

  If (event.value == 'Yes') {}

  this.getField("textfield_3").display = display.hidden;

  this.getField("checkbox1").display = display.hidden;

  } Else if (event.value == "No") {}

  this.getField("textfield_3").display = display.hidden;

  this.getField("checkbox1").display = display.hidden;

  }

  Once again this code worked for me for other fields. I think that it does not work now because I don't have the calculation Script still works?

  Any help would be greatly appreciated. Thank you!

  The problem is that when you convert an empty string to a number, it becomes zero... So I would use something like this:

  var a = this.getField("textfield_1").valueAsString;

  Si (a == » ») {}

  Event.Value = "";

  } else {}

  a Number (a) =;

  If (a == 0) event.value = "Yes";

  else if (a > 0) event.value = "No";

  }

• Problem with the click of boxes in Captivate 7

  Hi, I have a problem with boxes to click and how they advance to the next slide.

  I have a mixture of several buttons and different boxes click on a slide (one to open a pop - up, one to play some audio, one for closing the popup box, one to move to the next slide, etc..). I want you click the slide advance only when the "next" click on the box, but when the slide works it's duration, the boxes to click will advance to the next slide.

  I need all the boxes to click to be active and extend until the end of the slide. They have all of the selected actions, and none of them are set to "continue".

  I tried with only the box click pause button "Next" the blade until it is clicked and deleted property break the rest of them, but I always have the same question. I've attached a screenshot of the timeline. Any help would be greatly appreciated!

  

  Buttons to release the playhead as well, please check it out. He is not the type of interactive object that is important to free the read head, but the type of action: simple action will always come out the read head

  Try it: insert a text container with the cpInfoCurrentFrame system variable on a slide. Put a button, a form button and a click on this slide with the same action as easy as showing a previously hidden object. The slide will pause at the first point of suspension, but will be released when the user clicks on one of the interactive objects. I wanted to correct that information, for you and for other users.

  And regarding the grouping, watch this video: Advanced actions in CP6?

  Lilybiri

• Problem registering cluster in Hyperion Financial management.

  Hi all
  
  I have a sucessful 11.1.1.3 on another machine instance. I had installed the next component in my machine
  
  Financial management client
  Examples of financial management Applications
  Financial ADM management pilot
  
  When I try to register the cluster by providing the name of the server where the entire suite Hyperion has been installed, it is throwing error 'cannot save the cluster.
  
  Can someone help me solve this problem.
  
  Kind regards
  Richet

  Reading of:-http://john-goodwin.blogspot.com/2010/02/odi-series-will-real-odi-hfm-blog.html
  Just read the first half he crosses how configure the HFM client on a machine.

  See you soon

  John
  http://John-Goodwin.blogspot.com/