Problem of collision with objects in motion.

Similar Questions

• hitTestObject collision with pattern checking

  I enter an event frame checking collisions between objects on the screen and the mouse cursor. The problem. Each object has a name, but I want to detect collisions between the cursor and the objects with a model name.

  For example, on the screen there are five objects called

  XObj1

  AObj2

  XObj3

  XObj4

  AObj5

  I want to check the collision only mouse cursor and all objects starting with X or has.

  The solution I had doesn't work the way I expected because it runs a loop and returns the array with an index of these objects. I wish I had a direct approach as

  MouseCursor.hitTestObject (stage.getChildByName (Pattern));

  But I don't know if it's possible.

  Thanks in advance

  you need several times to loop through each object that requires a hittest or put all these objects in a common parent that contains no other child and repeatedly check a hittest with the parent.

• Problems of network with 715W

  For months (seems like years?) I had to power cycle regularly my printer, the PC and the modem/router to restore network connectivity.  More recently (now) connectivity is dead, even until I can't connect using a USB cable.  If I try to print a page of test via a USB port, it goes through the motions, pulling a page from the paper tray, abruptly resets and get the blank page on the output tray.  I tried without success with several resets of the router, different channels, power levels, etc.

  Anyubody other similar problems?  Of course, I had also just replace my black and purchased 2 new black cartridge and a color cartridge to avoid missing (victimized by this one at Christmas while they were not in stock!)

  After spending over an hour on the phone with Dell, call of the Canada, getting bounced to half a dozen different representatives in the United States and then back to the Canada even once, he ended it would cost more than a little troubleshooting only so buy a new printer (not DELL).  I managed to get a RA number to be able to return the cartridges, that I just bought.

  Then I called my provider I had problems last week with my network which I think might be related.  After about 15 minutes with them, they found where a framework had been modified caused place ended my problems.  Even if they are not 'officially' supporting printers, he worked through the configuration with me and you have my printer works again 100%.

• Problem on Photoshop 3D objects. Help ~.

  I created on Photoshop 3D objects, but he battled all of a sudden. When I open the file recovered, my objects become without color or texture like the following picture and there is a layer in front of my stage? (like the picture below) Anyone know what to do exactly? Help please ~

  I turn my visible background,

  

  It seems that it is a problem that deals with the brightness? contrast?

  As I change the camera (from the left to the top of the corner), I found the camera of the left hand towards the high side always displays the color correctly as the following picture:

  

  

  So what's the problem here? Anyone know?

  NVM... I found that it is because of my opacity setting is 10%... It is fine when I tune back to 100%. Thank you for helping

• ID CC 2015 problem: Impossible to move objects

  I have recently updated CC to 2015 on my Macbook air and have a class project, I try to start but I have a problem with objects in a file. I am able to resize them, but NOT move them to a new location in the file with or without a frame.

  Initially, I guess with a lengthy absence from the application method to treat objects must be refreshed in my memory so I searched and found that this was not the case.

  I then tried to restart the application and open the same object in a different file, but the problem persists.

  I won't be able to complete this class project if this problem cannot be solved. Please tell me that something can be done.

  I read something about erasing the preferences but not received any results from the buttons that she supposed to hold. Playback refers to 6 CS but I thought that this particular method might not be exclusive. This is despite the fact that I have actually no custom preferences to erase.

  Cloud of published Creative recently updated software for InDesign, Illustrator and Photoshop. I installed them, and all the InDesign issues have been fixed just in time for my second class project.

• vRealize 7 - NSX Automation deployments fail due to problems of certificate with vRealize Orchestrator

  Hello community,

  After you have installed the latest version of vRA, vRO, and NSX I run questions when you apply components that use components of the NSX. First of all: details of the version:

  -vRA: 7.0.0 (build 3292778)

  -vRO: 7.0.0.16989 (build 331003)

  -NSX: 6.2.1 (build 3300239)

  vRO plugin versions are delivered with the vRO version listed above with the exception of the plugin NSX, which has been updated to the latest version (1.0.3 published on 17.12.15).

  In the configured tenant vRO is configured as endpoint. I can check the data collection is running and working. I can see the plugin NSX for vRO runs the workflow 'create endpoint NSX' from time to time using the configured user of vRA VRO.

  In the configured tenant vRO is thus configured as server default for ASD vRO. Connection test is successful. When you save the config I'm prompted to approve the vRO certificate, which I confirm. Note that the thumbprint specified matches the footprint of the vRO certificate that I get during the visit of the vRO system on https://vro:8281. I am able to navigate the vRO vRA designer workflows, therefore: connection seems established.

  Within vRO the vRA COFFEE and plug-ins IAAS have been saved successfully. I am able to browse the inventory of plugin for both plugins.

  To solve the problem, I created a new unified plan within the design section of vRA with the following configuration:

  -Transport box: my area of transport configured NSX (checked: manual creation on this area using NSX works very well)

  -Routed res pol. Bridge: my reference for the dash cluster to use Pol

  -The only component dragged to canvas is a 'network and safety'-> 'On-Demand NAT Network' that uses a profile preset 1-to-many network as is "Parent network profile" without manual modification.

  -Note that, although there is a plan very simple example to illustrate the problem, it happens with any model that I have set up if any component is confgured requiring the NSX plugin for vRO.

  "Whenever I ask this plan, the request fails with the error message:" ","application [fa1e0689-0d06-4308-a914-e498c0d1fd99]: 404 not found "

  Looking in vCenter, NSX and vRO I can check that nothing is really trigged when you ask for the action plan.

  Consider the vRA /storage/log/vmware/vcac/catalina.log becomes very visible:

  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.isEndpointAlive:88 -
  vRealize Orchestrator endpoint with url [https://s00-vro.my.domain:8281/vco] is not alive. 
  Exception message:> [Host name 's00-vro.my.domain' does not match the certificate subject provided by the peer (CN=s00-vro.my.domain, OU=VMware, O=My Company, C=DE)]
  
  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.getFirstAliveEndpointByPriority:200
  - vRealize Orchestrator endpoint [https://s00-vro.my.domain:8281/vco] with priority 1 is not alive. Skipping.
  
  org.springframework.web.servlet.mvc.method.annotation.ExceptionHandlerExceptionResolv
  er.logException:189 - Handler execution resulted in exception: Endpoint not found. There are no vRealize Orchestrator endpoints that are alive.
  
  com.vmware.vcac.platform.service.rest.resolver.ApplicationExceptionHandler.handleHttpStatusCodeException:673 - 404 Not Found
  org.springframework.web.client.HttpClientErrorException: 404 Not Found
  ...
  ...
  ...
  
  

  Please note that I double checked the certificate. This is a self-signed certificate created using the 7.0 vRO new control panel, the one I get when you go to https://vro:8281. It is valid and the object (issed to CN) matches perfectly the hostname entered the ASD and endpoint configuration in the vRA. It is separable and time on all components of the server is in sync with the use NTP.

  Now, I even re-generated certificate and re-registered and rebooted all the components, but while I can see that the certificate has been updated all components I always get the same question.

  Never had this problem with the previous version of the NSX / vRA / vRO. I checked the documentation if nothing has changed here, but did not find what I'm doing wrong. Anythimg I'm missing here? Any bug?

  OK, this seems to be the issue. So put atleast to previous day since version ofvRO (cannot check if it's true for charges vRO 7 installs as well but it is probably) vRO 'control center' will generate certificates based SHA1 vRA love not for actions that use the endpoint in the vRA vRO. ASD seems to work without these problems.

  Sidenote: VRO upgraded installs will also come with SHA1 based CERT if they use a self-signed cert created by vRO. However: you would think that it is sufficient to recreate the cert using the control center. But it turns out it isn't, because it will generate a (new) based SHA1 cert.

  What I did to solve the problem:

  1. create a vRO SSH2 based certificate without the cert extensions, similar to the one that ships with built-in vRA vRO. I tend to use xCA for these jobs, but openSSL will do as well. The exact format required for the certificate of vRO is not documented, but I can make sure you need it like this: PEM certificate in key private and public including format PKCS #1, formatted as follows:

  -----BEGIN RSA PRIVATE KEY-----
  (Your private Key: your_vro_server.key)
  -----END RSA PRIVATE KEY-----
  -----BEGIN CERTIFICATE-----
  (Your primary certificate: your_vro_server.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your intermediate certificate: intermed.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your root certificate: root.crt)
  -----END CERTIFICATE-----
  

  I had problems when I used the key extensions so I would say you don't use and don't create a very basic cert without extensions V3, as indicated on the right of the image to my last post (ideally, you want to have a cert with the same properties as the cert is used by the device of integrated vRO vRA unless of course different CN) etc.).

  2. use the vRO control center located at https://your-externa-vro:8283 / vco-controlcenter / #/ and move to--> Orchestrator Server SSL certificate certificates. Use the action to import to import your PEM cert. It should tell you that you need to restart your device vRO. Then RESTART the device (for not just restart the service, this seems not be sufficient).

  3 al ' vRA remove the Endpoint vRO everywhere wherever it has been configured. Also, I removed the vRO to the ASD config just to make sure that nothings left.

  4 reboot the vRA power (IAAS can be left as what). I needed to do this because I have seen that the keystore at some point would keep beeing crushed by CERT vRA (?), I deleted it (AND I checked that they are deleted) reappears in the keystore after a while. After a reboot, the problem was gone, the keystore was clean.

  5. Add the configuration of endpoint and ASD vRO. Accept the certificate.

  6. the works.

  Therefore, while I have no more time to solve the problems more than I guess the problem is the SHA1 function certificate generated by the device of vRO. The internal unit is equipped with a SHA2 based cert that works and after that change the external device SHA1 cert in a basic cert SHA2 all works.

• Management of multiple detection of collisions between objects (not necessarily circles)

  Hello.

  I´d would like to know if any good West tutorial, or if anyone knows, a way to manage a detection of multiple collision with detection of pixel level, objects, not necessarily circles, irregular objects.

  Any help?

  Try: flash 3 physical collision

• Flex 4: problems of Module with the mx AdvancedDataGrid

  Hello

  I have a modular application. SDK is 4.5 Hero.

  The main application loads a module and receives interface components user thereof, which are displayed thereafter.

  In general, the component, returned from the module displays OK with mx components and spark.

  However, if I add AdvancedDataGrid I get the exception:

  --------------------------------------------------

  TypeError: Error #1007: instantiation attempted on a non-constructeur.

  at mx.controls::AdvancedDataGridBaseEx/getSeparator() [E:\dev\hero_private_beta\frameworks\pr ojects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4619]

  at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators() [E:\dev\hero_private_beta\fra meworks\projects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4661]

  at mx.controls::AdvancedDataGrid/createHeaderSeparators() [E:\dev\hero_private_beta\framework s\projects\datavisualization\src\mx\controls\AdvancedDataGrid.as:2428]

  at mx.controls::AdvancedDataGridBaseEx/drawSeparators() [E:\dev\hero_private_beta\frameworks\ projects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4575]

  at mx.controls::AdvancedDataGridBaseEx/updateDisplayList() [E:\dev\hero_private_beta\framewor ks\projects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:2120]

  at mx.controls::AdvancedDataGrid/updateDisplayList() [E:\dev\hero_private_beta\frameworks\pro jects\datavisualization\src\mx\controls\AdvancedDataGrid.as:2899]

  at mx.controls.listClasses::AdvancedListBase/validateDisplayList() [E:\dev\hero_private_beta\ frameworks\projects\datavisualization\src\mx\controls\listClasses\AdvancedListBase.as:3472]

  at mx.managers::LayoutManager/validateDisplayList() [E:\dev\hero_private_beta\frameworks\proj ects\framework\src\mx\managers\LayoutManager.as:719]

  at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\hero_private_beta\frameworks\pr ojects\framework\src\mx\managers\LayoutManager.as:778]

  at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\hero_private_beta\frame works\projects\framework\src\mx\managers\LayoutManager.as:1157]

  ---------------------------------

  The compiler option is - keep-all-type-selectors. It works very well with the mx:DataGrid and all other components for example, but not with AdvancedDataGrid.

  My application has the following structure:
  TestLibrary - a library application containing a single interface:
  test. IModuleComponent
  Code:

  test package

  {

  Import mx.core.UIComponent;

  public interface IModuleComponent

  {

  function getComponent(): UIComponent;

  }

  }

  TestModule - an application of module, using TestLibrary as an EPIRB.

  Components:

  -test.module.TestModule.mxml

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:Module ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  " xmlns:s = 'library://ns.adobe.com/flex/spark"" "

  "" xmlns:MX ="library://ns.adobe.com/flex/mx" width ="100%" height = "100%"

  implements ="test. IModuleComponent"xmlns:module =". test.module *">" "

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.core.Application;

  Import mx.core.UIComponent;

  Import spark.components.Application;

  test import . IInstanceFactory;

  public function getComponent(): {UIComponent

  return new TestComponent();

  }

  []] >

  < / fx:Script >

  " < s:VGroup width ="100%"height ="100%">

  " < s:Label text = 'Module of Test" / > "

  " < module: TestComponent width ="100%"height ="100%" / >

  < / s:VGroup >

  < / mx:Module >

  -test.module.TestComponent.mxml

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:VGroup ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  "xmlns:s ="library://ns.adobe.com/flex/spark"

  "xmlns:MX ="library://ns.adobe.com/flex/mx"

  width ="100%" height ="100%">

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.collections.ArrayCollection;

  [Bindable]

  private var dpADG:ArrayCollection = new ArrayCollection([)

  {Artist:'Ground', Album:'Slanted and enchanted', price: 11.99},.

  {Artist:'Ground', Album:'Brighten the corners', price: 11.99},.

  {Artist:'Healthier', Album:'A child once', price: 11.99},.

  {Artist:'Healthier', Album:'Helium wings', price: 12.99},.

  {Artist:'The doors', Album:'The doors', price: 10.99},.

  {Artist:'The doors', Album:"Morrison hôtel", price: 12.99},.

  {Artist:' Grateful Dead ', Album:' American Beauty ', price: 11.99},.

  {Artist:' Grateful Dead ', Album:'In the Dark', price: 11.99},.

  {Artist:' Grateful Dead ', Album:' Shakedown Street ', price: 11.99},.

  {Artist:'The doors', Album:' Strange Days ', price: 12.99},.

  {Artist:'The doors', Album:'The best of the doors', price: 10.99}

  ]);

  []] >

  < / fx:Script >

  " < s:Label text = ' Test data grid" / > "

  < mx:AdvancedDataGrid

  width ="100%" height ="100%"

  "sortExpertMode ="true"

  dataProvider ="dpADG{}">

  < mx:columns >

  " < mx:AdvancedDataGridColumn dataField ="artist" / > "

  " < mx:AdvancedDataGridColumn dataField ="Album" / > "

  " < mx:AdvancedDataGridColumn dataField ="price" / > "

  < / mx:columns >

  < / mx:AdvancedDataGrid >

  < / s:VGroup >

  -----------------------------------------
  TestComponent is used twice:
  (1) in the module itself
  (2) in function getComponent(), who comes from the IModuleComponent interface.
  TestWebApp - the main web application.
  TestWebApp.mxml:

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:Application ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  " xmlns:s = 'library://ns.adobe.com/flex/spark"" "

  " xmlns:mx = 'library://ns.adobe.com/flex/mx"" "

  minWidth ="955" minHeight ="600">

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.charts.chartClasses.InstanceCache;

  Import mx.core.UIComponent;

  test import . IModuleComponent;

  private onButtonClick() function : void {}

  var app: IModuleComponent = testModule.child as IModuleComponent;

  var testComponent: UIComponent = app.getComponent ();

  group.addElement (testComponent);

  }

  public function createInstance (instanceClass: class): object {}

  return new instanceClass();

  }

  []] >

  < / fx:Script >

  "" < s:VGroup width = "100%" height ="100%" id = "Group">

  " < mx:ModuleLoader id ="testModule"url ="... /.. " /TestModule/bin-debug/test/module/TestModule.swf"" "" "

  height ="100" width ="100%"

  {applicationDomain ="{} }ApplicationDomain.currentDomain"/ > "

  " < s:Button label = 'click me!"click = "onButtonClick ()" / >

  < / s:VGroup >

  < / s:Application >

  ---------------------------------------
  Initially when the web application is started the an AdvancedDataGrid (coming from the ModuleLoader tag that loads TestModule, which contains TestComponent) appears correctly.
  When the button ' Click me ' is clicked - TestComponent another instance should be added in the VGroup.
  Instead the exception above appears.
  IF TestComponent contains mx:DataGrid or any other spark or component MX - everything works fine - the 2nd instance of TestComponent is added.
  This problem only occurs with AdvancedDataGrid.
  I activated - keep-all-type-selectors in TestWebApp, I have tried all combinations of RLS, merged outside of libraries, etc. - no chance.
  The problem with preview of flex 4.1 and 4.5 burrito.
  I know it's a very specific question... but...
  We are trying to create a modular application in our company... and we want to use AdvancedDataGrid (spark DataGrid is not ready yet) so... Please help
  Thanks in advance,
  Deyan

  Create a string with the fully qualified name of the class.

• Specific collisions with the mouse

  Hi all

  I am currently building a hidden object game, but finds it difficult to get accurate results to where the mouse is clicking. I thought using hitTestPoint to check if the mouse coordinates have been actually collide with the pixels of the form would work, but it produces exactly the same results by simply searching for a MouseEvent.CLICK event. It seems to be returning true even if the pixels that is clicked on are (i.e. just background/no part transparent form). Is there a way to check if the pixels that is clicked on actually contain the image of the object?

  Thanks in advance,

  Dinkyfish

  Edit: and Yes, I put the third function hitTestPoint property to 'true' whereas it should resemble the actual object shape rather than just the bounding box

  If forms that you test collision with have their property cacheAsBitmap set to true, or if they have been imported (not created using Flash's vector drawing tools) transparent areas in the rectangular bounds of the object contains transparent pixels that are the same as the non-transparent pixels for hit-testing.

  What you can do is intercept the CLICK event and check if it occurred on a transparent pixel before letting trigger your listener function. Here is an example:

  My_Button.addEventListener (MouseEvent.CLICK, check_for_transparency, true, 100, true);

  My_Button.addEventListener (MouseEvent.CLICK, button_click_handler, false, 0, true);

  function check_for_transparency(my_event:MouseEvent):void

  {
  var button = my_event.target;

  var my_pixel = button.bitmapData.getPixel32 (my_event.localX, my_event.localY);
  var pixel_alpha:uint = (my_pixel > 24) & 0xFF;

  If (pixel_alpha == 0)

  {
  my_event.stopImmediatePropagation ();
  }

  }

  function button_click_handler(my_event:MouseEvent):void

  {

  do things

  }

  The check_for_transparency listener will get the first event because its setting useCapture is set to true and its priority is higher (100). If the pixel is transparent, it stops at the event to spread the second listener ever calendar. If it is not transparent, it goes on its merry way.

  Note that this method requires that the target of the event is a Bitmap object. In addition, it checks for alpha == 0 but it could check against any level of transparency that you want.

  If you want to use buttonMode (hand cursor) with your buttons, or some sort of reversal / events you would need a listener ENTER_FRAME constantly looking for transparency under the cursor.

  On the other, simpler but less dynamic method is to create a mask for each of your buttons is the same shape as the non-transparent part of them. Depending on the amount of buttons that you have and how complex your forms are it could be a lot of work.

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• the site theme is problem with firefox, but not any problem of chrome with!

  the site theme is problem with firefox, but not any problem of chrome with!
  for ex: http://haftegy.ir
  How to fix?

  Wow sorry! IM update firefox to the latest version and my problem is solved.
  Thank you very much.

• I can not access to sites such as Youtube or truckcam.tv it seems that the problem may be with the most recent Adobe flash and firefox as browsers further

  Question
  I can't access to sites such as Youtube or truckcam.tv , seems, the problem may be with the last Adobe flash and firefox as other browsers work I reinstalled both, but without success, even on the two desktop using Vista and laptop on Windows 7

  See:

  • https://support.Mozilla.org/KB/Flash-113-crashes

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Problems of wireless with my Satellite A505

  Hello people,

  I have a Satellite A505 which uses a Realtek RTL8191SE wireless network card. Recently, I had connectivity problems with my home router. This configuration used to work perfectly, but recently, I had a problem where I won't be able to connect to my router wireless access point. Reset the adapter does not solve the problem, or don't restart.

  I found that my router reboot solves the problem, I am able to login after the reboot of the router. I have not had this problem on any of the other devices or laptops in my house and never had this problem until last month. I tried to do a factory reset on my router in order to ensure that some recent changes in our setup of the router were not to blame, but the problem persists even with a clean slate.

  Ideas for what to do?

  Thank you!

  Hello

  >... and never had this problem until the last month or more
  Do you use WLAN driver from Toshiba support page?
  I ask this question because I noticed that under Win7 driver for this wireless network card is offered as optional update. Maybe this update is installed, and now you have this problem.
  If possible, try to roll back OS a few weeks back and check if the problem persists.