Problem of control of the Dev 2.1.63.73 SQL syntax

Similar Questions

• Weird problem with control of the ring and foot

  So I have some sort of weird issue with a control of the ring and a chart. I'm with LabWindows/CVI on a Windows 7 computer. The part of the program I'm looking at is basically to navigate through data - there are several "transition" (rehearsals experience), and you can choose the one that you want to watch in the list.

  Normally, you would select transitional in the list, it plots the data, then it is done, basically. However, all of a sudden (don't know how long it spent for), when I select anything except 'Average', he made all the tracing and such, then it changes control of the ring to 'Average' (it is not plot the average data or generate all the reminders that I can tell).

  Now the thing the more bizarre as you can see below, it seems that the switch happens just when I draw something on the chart:

  

   

  So, it's just weird. The code in this section is here:

     if(uidc.polyon) {
              polynomial_subtraction(curr_data, np, uidc.polyord, 0); // 0 Skip for now
          }
  
          // Scale the curr_data for gains, then pre-scale the FFT data
          // to have no change in the power spectrum (multiply by (2/np)
          for(j = 0; j < np; j++) {
              fft_data[j] = curr_data[j]*2/np;
              curr_data[j] = curr_data[j]*uidc.fgain[i] + uidc.foff[i];
          }
  
          uidc.fplotids[i] = PlotY(dc.fid, dc.fgraph, curr_data, np, VAL_DOUBLE, VAL_THIN_LINE, VAL_NO_POINT, VAL_SOLID, 1, uidc.fchans[i]?uidc.fcol[i]:VAL_TRANSPARENT);
  
          // Prepare the data.
          FFTEx(fft_data, np, npfft, NULL, FALSE, curr_fft);  // Do the fourier transform
  

  DC is a structure that I use to better organize some UI controls and uidc is for display RAM variables, then dc.fid is the Panel that is embedded in the tab "FID", dc.fgraph = FID_Graph and corresponds to the chart control. Control of the ring is actually in a child Panel, dc.cloc [0]. FID_Graph has a point, it can produce, but the reminder is empty (no not coded something there yet).

  I have also considered that perhaps something in another thread (I don't think there is, but whatever) I see is the cause, however, this behavior still happens on that line. I tried to break in different locations, on hold, then continues, as well by adding a loop containing Delay (0.01), a loop of 100 times. Always happens after the conspiracy.

  Does anyone have any idea why this might be happening?

  Hi Paul,.

  I don't have a solution, but I wanted to point out that, even if you see the ring to change its value only when you call the function of tracing, that doesn't say what this function call that really changes the value of the ring. In CVI, some drawing operations are batched, for performance reasons, and the Panel updates only visually at certain times. One of those moments when you draw a chart data. Yes, the ring changes visually at this time there, but it is probably just 'catch up' a change earlier.

  As you are looking through the code, when the value of the ring, you can use the term > command update UI to force the update panel, so that you don't have to wait for the tracing function and see if all goes well this change happening earlier.

  Luis

• Problem take screenshots on the Dev Alpha A

  Hello

  To add screenshots of my application to BlackBerry World, I need to take some of them on my Dev Alpha running my application. As far as I know that I could take screenshots by pressing Volume Up + Volume down at the same time for a few seconds or more, however, I realized that this is not possible more gold SDK.

  You have no work around I can take some screenshots on the Dev Alpha?

  Thank you

  Pressing Volume Up and Down still works on the Dev Alpha. Turn on your sound to check if something happens.

• My iPhone is stuck in headset mode.  It's the THIRD phone that has had this problem.  Why Apple won't be a manual control of the headphone plug in the software?

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  doctortroyp wrote:

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  It is not common in the vast majority of users.

  If you wish to have a such feature manual control available, http://www.apple.com/feedback/ will be a good resource for this comments.

  Otherwise, try to restore your iPhone as new and not a backup test to see if the problem is back by restoring your backup on each of these phones.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to

  Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to another folder. All known solutions?

  This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Double digital precision control using the D:H:M format has problem increment/decrement

  I have a VI that allows users to define the range of dates in a control, and it does not work as it should.  Specifically, the control is the standard digital control of the modern palette, this is the data type is Double, and it is in the format % <%D:%H:%M> t.  The problem is that when I have the cursor in the hours (two digits highlighted), when I use the keyboard keys arrow up and down or buttons increase/decrease control, instead of the increment or decrement, the minutes.  When I have the cursor over the days, the inc/dec intervenes on the hours.  Has no way to increase/decrease the days in the control either.  In addition, if the cursor the cursor in the line rather than a selection, changing values are the values to the right of the cursor on the line - even the opposite of the features of LabVIEW with other digital formats.

  In addition, the left-right arrow keys won't move the selection / cursor in the control, except to spend hours to days - no other movement is possible.

  Is this a known issue?  I'm the see in 2010 SP1 and LV LV 2012

  I have attached a VI composed solely of misconduct control.

  In addition, I tried digital controls system palettes, classic and Express and they do the same thing (or worse).

  I guess at this point, I'll need to use separate controls for each field, the event handlers for the arrows, etc., but the complexity which adds is almost painful.  If anyone has another idea, I'm all ears.

  Thank you,

  Erik

  took an hour and built a work around for the problem.  No was not as bad as I thought originally that are curious differences between the Terminal command, local variables and value - namely, the Value property is the value after the event, while others have the value of pre-event for the control.  This always works for my application.

  This version is in LV 2010 SP1, which is as far as I can go.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Parental control on the Admin account problems

  A few months ago, I created a new account on my computer for work only.  I set the parental controls on the new account and only the work account.  I got by without my computer for work then off the parental control.  Now, I'm unable to download games without him asking for a password.  I don't know what password I had used since I don't end up need it and none I've tried have worked.  So, how can I, as an administrator, disable this feature?  I have consulted the parental control and done everything I have seen/read that was recommended, but it won't allow me to change the settings on my own admin account without establishing a second admin account.  So, how can I remove this feature from the admin, only the admin?  It does not accept any next to the admin account, and even then it won't take my password.

  I work at it for a few weeks now and tried everything I can think of.  Today I spent most of the day trying to get this thing to work.

  More details on what is happening-
  -I'm going to download a game on the net while connected to my admin account
  -Everything works until the final stage when he usually asks for a general permission to my antivirus
  -A pop up appears which reads: you do not have the necessary permissions to use all the features of the program you are about to run.  You can run this program as a different user or continue to run the program as long as the current user.
  -Click on the current user and it closes, download fault.
  -Enter a password for the administrator and it says I have a user name or password invalid.
  -Enter my username and password and it closes, download fault.

  Can someone please help with this?

  Hello KS. GAL.86,

  Is the problem with the account of the work that you had created that has activated the Parental control? You can only configure Parental controls on a standard account and not an administrator account.

  If so, then create a new account that has not activated the parental control.

  Is the issue that you are experiencing that you can not download programs as an administrator?
  What is the exact error you get when you download a program?

  It cannot have anything to do with Parental control.

  Please answer back with more details and information.

  Thank you

• Problems with the parental control on the administrator account.

  Never use us the 'administrator' account as I have not configured any other account (it was unnecessary since there are no children in the House).  Whenever I try to download a game, I have problems.  It will finish the download, but as soon as I try to start the game, it gives me an error message saying 'parental controls have prevented this application to run.  I don't know why it gives this error and won't let me in the game, since I'm on the administrator account and it wont let me make changes to parental controls for the administrator account.  Anyone know what is the problem and how can I solve this problem?  Thank you!!!

  Try to create another administrator account, and then connect to that account and try to change or disable the parental control for the administrator account.  I don't know if it will work, but it's worth a try.

  I hope this helps.  If this isn't the case, after return and we will try something else.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  I would be out of system repair and safe boot mode:

  Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• character controlled with the mouse problem

  I would like to make a game in which the character is controlled with the mouse exactly like this game: http://flashdo.com/item/asteroid-wave-game/1053/full_screen_preview

  I guess that the author simply used the code snippet that changes the cursor to an object. However, this causes a game to break the question; If the user makes the cursor off the screen flash and then come back somewhere else, the spacecraft will Warp to that location. Full screen, because the user cannot make the cursor off the screen, this problem does not occur.

  The code snippet using drag-and - déposer, when cursor the user comes out of the screen, the object did follow the borders of the screen Flash. However, given that the user has to hold the left button of the mouse and the cursor does not disappear, it is not very useful.

  Is there a way to control the character exactly as the game above, but when the cursor leaves the screen, make the character well follow the borders of the screen Flash like the drag and drop code snippet don't?

  Also, is there a way to make the box where the character can move smaller than the scene?

  Thank you very much.

  If you check the startDrag function, you will see that it provides the inclusion of the two arguments.

  startDrag (lockCenter:Boolean = false, limit:Rectangle = null):void

  The first is to have the cursor centered on the object or not, and the second is where you can specify a rectangle which limits the area of traffic allowing drag.  What to do in smaller just step specify a rectangle for your needs.

• Problem creating DEV_PORTAL via the remote control

  Hello
  
  I would really appreciate your help to meet slot problem:
  
  in OBIE11g when creating patterns via the remote control, all the patterns, I chose to be created are working well except DEV_PORTAL, which throws the error
  
  SQL error when connecting with thin driver (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=HOST_NAME) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = SERVICE_NAME))): ORA-01017: invalid user name password login denied
  
  The problem is this role/user/password is correct, because:
  
  1 other patterns are created by using the same credentials (with SYSDBA rola)
  2. I can connect (via SQL developer) to database using the same settings and everything works
  
  I encountered a similar problem on the forum under
  
  Creating DEV_PORTAL schema for Oracle Forms
  
  but without any solution working :(
  
  Thanks in advance

  Why you install DEV_PORTAL scheme, for the installation of obiee 11g select Oracel Business Intelligence in the performance of the remote control. It will install only two MDS and BIPlatform patterns.

• Problems with EM Database Control after the application of 10.2.0.4 patches group

  Hi all
  
  Host: Linux x 86
  DB: One-time EM control the database. Originally 10.2.0.1 patched to 10.2.0.4
  
  Last night I upgraded database 10.2.0.1 to 10.2.0.4. Everything seemed to go well. I don't have any errors in the process, and when I logged in the database control, everything seemed fine. It was late at night, so I don't navigate around for very long, however. When I came this morning and did a few more extensive trials, after login I noticed first that, in the section general, version database has been listed as 10.2.0.1.0. I thought it was quite strange because I had just been connected to SQL * more and saw that the database was aware he was at version 10.2.0.4.0. I refreshed the page and saw
  
  "java.lang.Exception: IOException while reading the response: connection reset".
  
  top of the page. I have seen this problem before, and in the past, it has been resolved by restarting the dbconsole or ensuring that the analysis configuration is set up correctly. The first thing I did was question
  
  [Home] $ emctl stop dbconsole followed
  [Home] $ emctl start dbconsole
  
  to see if it would do the trick. When I saw that it didn't, I went in the Configuration of the analysis and that he was surprised to see that he said "no element not found." I refreshed the page and this error appeared:
  
  oracle.sysman.emSDK.emd.comm.CommException: IOException while reading the response: connection reset
  
  I tried to follow all the instructions in the Readme as closely as I could. I looked on the Internet and the Oracle Forums for most of the day trying to find the cause of this error. I see that people have these errors, but the circumstances are not the same as mine. Is this a common problem? Anyone know what I can do to solve it?
  
  Any help would be greatly appreciated.
  
  Thank you!
  John

  Try C.2 (Option 2. Recreate the DB control and repository Configuration files)

  HTH
  Srini

• Apple: Can allow you parents more control over the access of children iTunes?

  Parental restrictions on mini iPad 16 GB of my granddaughter running iOS 9.3.5 (original version) do not seem to allow parents to control properly the child access iTunes. We have music, news and Podcasts (iTunes), reserved for the 'Clean' as opposed to 'Explicit', but he is always happy that we find unacceptable.

  Apple or someone you suggest a way to further control access of the child to the iTunes app?

  If not, then... Apple - there must be a way to create a framework between Clean and Explicit. You please solve this problem?

  There are other parents who have the same problem?

  Thanks for your thoughts / feedback.

  Apple isn't here.

  This is a support forum user community product technique.

  Aside from Apple employees who are specialist community technical and support the community moderators, we are all users here, just like you.

  If you want to leave a comment on the ability of your iPad to have parental controls more complete, leave your comments here.

  http://www.Apple.com/feedback/iPad.html

  Good luck!

• Problem with keyboard on the Satellite Pro C660

  Hi all

  I am completely confused because my keyboard has gone haywire and am pretty annoyed, that I can't fix it

  Am running windows 7 on toshiba satellite laptop computer pro and I was wondering if this is a software or hardware problem.

  Here's what happens:

  -Caps lock light stays no more but it flashes when I press it. It always works well
  -Left SHIFT key still works, but when I press on it... it is also creates this symbol ~ at the same time within UK keyboard. If I change U.S. keyboard then it enters the vertical BAR.
  -The ~ key above the tab key doesn't do what ¬
  - And that the key to the pipe that is above the input Tape button this: #7

  I updated the BIOS earlier today, but nothing helps...

  Does anyone have an idea on how I can fix this as its quite frustrating! Thanks for all the ideas.

  see you soon

  Post edited by: asklink

  > Am running windows 7 on toshiba satellite laptop computer pro and I was wondering if this is a software or maybe hardware problem.

  Keyboard is controlled by a Microsoft driver that is part of the Window System.
  So the story is pretty simple either your internal keyboard has failed or the keyboard on the motherboard controller does not work.

  How do I know what part is affected?
  It is also quite simple, you connect an external USB keyboard.
  If you notice the same problems using the external keyboard, the problem is related to the keyboard controller. If you n notice any problems using the USB, the computer keyboard keyboard internal works poorly in this case has to be replaced.