Problem of date and time! Please notify.

Similar Questions

• Facing problem with date and time.

  * - Original title - BIOS

  Mr President.

  I have Compaq CQ2100IL Desktop pc for awhile I was faced with the problem of the date and time, so I posted this question to Microsoft, so they gave me a solution change my CMOS battery, so I did it, but despite this I get this error again then I tried and got answer to update my BIOS , I tried to find a version update on the HP site but did not find, so please help me in this matter.

  Hi Vikas,

  You can contact HP here: http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&dlc=en&lc=en&os=4062&product=3890751&sw_lang=

  Warning in the BIOS: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Problem with date and time

  HP Elite m9498d, Windows Vista 32-bit. Battery change, but the time and date again goes back to January 2002?

  Then, it might be a problem with the BIOS itself. Try to update the BIOS which for sure should solve the problem.

• Satellite M100-JG2 HotKey and date and time problem

  Hi all

  I'm not very good with computers, and I've had some problems for a while now. My laptop is almost three years, I don't know why I'm writing this after so long but anyway. I think they are called "keys" or "launchkeys", hopeyfully, you know what I mean, but anyway they do no more work. They worked for a while, but they do not work now. I went into the control panel and went into the 'Toshiba' orders and tried to change what does each control, but it still does not work. No one knows how to fix?

  Also, another problem that I had since I first laptop is my date and time are screwed up. If I put my 15:30 time, it works perfectly, until around 16:15, that when he goes back to 15:30 and go all the way up to 16:15 and continues in this cycle until I manually change the time. I had a few friends (no professional) to look at, but can not understand. When I start my laptop I go to settings in the start screen, try to change it was from there, but it keeps going during the cycle. If I click on the time and click on the tab "internet time" and say "update now", it updates, and then only time will work normally, but only until I turn off my laptop. Once I turn it on then next turn, it passes through this new cycle of 45 minutes. If anyone has had this problem or knows how to fix?

  I'm not very good at explaining, but I hope you guys can help! I appreciate it really :) Show!

  > I think they are called "keys" or "launchkeys", hopeyfully, you know what I mean, but anyway they do no more work. They worked for a while, but they do not work now. I went into the control panel and went into the 'Toshiba' orders and tried to change what does each control, but it still does not work. No one knows how to fix?

  The Toshiba Satellite M100. M100-JG2 seems to be a Canadian series laptop. I recommend you to visit the driver Toshiba Canada page and to download and reinstall the tool called controls, Toshiba HotKey Utility, touch and launch.

  http://support.Toshiba.ca/support/download/ln_byModel.asp

  > Also, another problem that I had since I first laptop is my date and time are screwed up. If I put my 15:30 time, it works perfectly, until around 16:15, that when he goes back to 15:30 and go all the way up to 16:15 and continues in this cycle until I manually change the time. I had a few friends (no professional) to look at, but can not understand. When I start my laptop I go to settings in the start screen, try to change it was from there, but it keeps going during the cycle. If I click on the time and click on the tab "internet time" and say "update now", it updates, and then only time will work normally, but only until I turn off my laptop. Once I turn it on then next turn, it passes through this new cycle of 45 minutes. If anyone has had this problem or knows how to fix?

  I think that you have changed the date and time in the BIOS. Is this good?
  If not, change it and don t forget to save the changes.

  In Control Panel--> Date and time--> time tab Internet, please uncheck the auto sync with the internet time server.
  In the other, called tab time zone please choose the right time zone and activate the tick to the option called automatically adjust the clock for an advance of changes

  See you soon

• My problem is setting in my office date and time.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! every time I have to connect to my laptop, an error message will appear. I need to check my date and time. and when I check, it does not. I tried manually reseting but it did not work when I restart my computer. Also in my date & time zone there is no specific place which may work for me. Theres no philippines listed. And I tried the update at the time of the internet and the answer is successful. but when I re start my computer is the same problem I met.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Chances are good that the CMOS battery that powers the clock when the computer is shut down has not or it is so low, that it is working properly.  Try to replace the battery and see if that solves the problem with the clock not the hold time (and this willl happen if you use the time synchronization because when the power is off, the clock needs the battery to keep read time).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• problem in windows 7 homebasic for date and time

  Hello in my windows 7 homebasic version every time when I start the PC, I have to set the date and time. its very painful for me, so please say if any suggetion is there.

  Hello

  You don't tell us which is your time after reset for good.

  If after having set the time/Date and stop and restart your machine the time is to say the year 2007-2009 etc., you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  See you soon.

• Passport problems of blackBerry with date and time on the passport of Blackberry

  Hello!
  I have problems with my passport for Blackberry.
  For the couple in a day time, it changes itself. So my hub doesn't work, I get no new messages, I can't send messages! The last time I did correct settings did not help. If everything is correct or hub or messages do not work. I tried to make different adjustments, tried to restart the hub, tried to restart the phone. but it does not work. I really need your help because I can't use my phone and nobody can connect with me.
  I didn't drop the phone. I know that these problems are related to the date and time because since the first problem with hub and messages has occurred, I saw that the date and time were bad, changed to correct and everything went well. I don't understand why he doesn't now. Can you tell me what to do?
  OS 10.3.2.2836
  1 January, I received this phone and it worked allright until some of the OS updates, can't tell which exactly because I have auto update.

  For those who have the same problem: I deleted the contact of my mother on the phone. I deleted the messages displayed as January 27, then I added my mother to local contacts and new messages started coming

• Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Hi Anandsable,

  The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.

  Hope the helps of information.

• Problem with the registration date and time: only one date is recorded

  Hello community,

  I have the following problem:

  I automatically stores the datetime values in a date column "changed_on", whenever a user saves a form.

  Unfortunately, when I show this value in a form or report, only the correct date is shown. Still, the time is 00:00. There is no time in the database value, too.

  

  Whenever a user clicks the save button in my form, the value of "changed_on" is generated by a calculation that returns "sysdate" (see image below).

  I think I tried everything now, but I can't understand how to record the date and time correctly. I already tried the format for the changed_on field mask to my preferred format, but it does nothing (jj. MM YYYY HH24).

  How can I automatically record the date and time?

  You need two things.

  1. put the mask of the P3_CHANGED_ON element to JJ. MM YYYY HH24

  2. change your source of calculation to

  TO_CHAR (sysdate, ' DD.) MM YYYY HH24 ')

  In this way, what holds the element and implicit conversion happens when recording records will match.

  Thank you

  -Jorge

• Strange problem casting between the DATE and time STAMP

  Hello world
  
  I'm faced with a problem of strange casting between the DATE and time STAMP. Strange, because this happens in SQL-Developer and the Testdatabase, but not when called from inside SQL-Plus, even if all Session settings are set to the top completely equal.
  
  I work on the Oracle 11 g Enterprise Edition Release 11.2.0.1.0 Windows database and run the following script, taken from SQL-Developer script output:
  
  < pre >
  create table ts_test)
  time/date stamp,
  stamp_copy timestamp)
  table TS_TEST standing.
  
  create or replace view vw_test as
  Select cast (date stamp) buffer,
  Cast (stamp_copy as date) stamp_copy
  of ts_test
  view VW_TEST standing.
  
  insert into ts_test
  Select systimestamp, the double null
  1 eingefugt Zeilen.
  
  Commit
  festgeschrieben.
  
  create or replace trigger trg_ts_test_iu
  instead of update on vw_test
  Start
  Update ts_test
  Set stamp_copy =: new.stamp_copy;
  end;
  RELAXATION trg_ts_test_iu kompiliert
  
  Update vw_test
  Set stamp_copy = stamp
  1 Zeilen written on.
  
  Select the stamp, stamp_copy, dump (stamp_copy)
  of ts_test
  STAMP STAMP_COPY DUMP (STAMP_COPY)
  -----------------------------------------------------------------------------------------------------------------
  30.05.2012 19:08:49, 218000000 30.05.3192 20:09:50, 000000000 Typ = 180 Len = 7: 131,192,5,30,21,10,51
  
  Select *.
  of nls_session_parameters
  VALUE OF THE PARAMETER
  ----------------------------------------------------------------------
  NLS_LANGUAGE GERMAN
  NLS_TERRITORY GERMANY
  NLS_CURRENCY €
  NLS_ISO_CURRENCY GERMANY
  NLS_NUMERIC_CHARACTERS.
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT exact hh24:mi:ss
  NLS_DATE_LANGUAGE GERMAN
  NLS_SORT GERMAN
  NLS_TIME_FORMAT HH24:MI:SSXFF
  NLS_TIMESTAMP_FORMAT JJ. MM YYYY HH24:MI:SSXFF
  NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
  NLS_TIMESTAMP_TZ_FORMAT JJ. MM YYYY HH24:MI:SSXFF TZR
  NLS_DUAL_CURRENCY €
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  
  17 Zeilen offiziell
  
  Rollback
  Rollback abgeschlossen.
  < / pre >
  
  Look at the strange data that stamp_copy was after the update.
  
  When run from SQL over, everything is fine. But when I run this code in our application, the same phenomenon occurs. I've even seen a data dating back to the year 11907 (!), giving an exception by selecting from the table.
  
  Someone at - it an idea on how to work around this bug?
  
  Best regards
  
  Jürgen

  Did you check metalink for bugs?

  There are a few listed in this blog, that may be useful for you.

  http://hoopercharles.WordPress.com/2011/02/17/strange-timestamp-behavior/

• Date and time display problem

  Hello everyone,
  
  I'm having a little problem and I hope someone here can help me. I have a form and a report based on a table, let just say for simplicity that is the structure of the table:

  create table table1(
  id varchar2(5),
  date_added date)

  I have made a calculation, after submit, the form. If the end user has to put in the code. The code for the calculation is:

  select sysdate from dual

  Now, this is where I get my problem. I want to be able to display the date and time in the report. The code that I use for this is:

  select id, to_char(date_added,'DD-MON-YYYY HH24:MI:SS') from table1

  However, this produces the result on my APEX report:

  1 , 11-MAR-2009 00:00:00

  Really frustrating thing is that if I insert by using the command line, SQLPlus or APEX SQL commands I get the expected result.

  4 , 11-MAR-2009 10:32:35

  Anyone know what I'm doing wrong and how to fix my problem?
  
  Thanks in advance,
  -N.S.N.O.

  Hi NSNO,.

  I created a form as below and is entered a few entries to test the date column, which is not included in the form. It is filled by the trigger as follows:

  CREATE TRIGGER biud_events
  BEFORE the events of the INSERT or UPDATE or DELETE ON
  FOR EACH LINE
  BEGIN
  IF THE INSERTION
  Select nvl (max (id), 0) + 1 in: new.id of events;
  : NEW.event_date: = SYSDATE;
  END IF;
  IF THE UPDATE CAN
  : NEW.event_date: = SYSDATE;
  END IF;
  END;

  You can access the form and the report by clicking on the links below. Report gives the correct time.

  http://Apex.Oracle.com/pls/OTN/f?p=43368:63

  http://Apex.Oracle.com/pls/OTN/f?p=43368:64

  Kind regards
  Zahid

• date and time problem

  If I put the date and time in A cell and the time and date in the B cell that is two days later, how to calculate the total number of hours in the cell C.

  Here's one way:

  

  The C2 formula is:

  = DUR2HOURS (B2−A2)

  The result is in decimal hours.

  You can also just B2 - A2 and format to display hours and minutes if you wish;

  

  SG

• given the date and time not set when computer starts. also have a problem with typing

  by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

  on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

  You may have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• International date and time

  Last week, I was in the United States and took a lot of pictures.  Now that I'm back in Australia, Photos has automatically adjusted the time and date of the pictures to what was the time in Australia, not the time it was when I took the pictures.  It's incredibly annoying.  Does anyone know how to fix this please? Thank you very much.

  Hello! I had the same problem. I took photos in Asia, some on them without location data. I imported on my Mac at home in France. And then, something went wrong with the date and time. As I've learned here for photos without location data, Photos uses the time zone of the place where you perform the import. If had imported the photos in the same zone where I took them, everything would have been fine.

  The solution was to select all the photos and then manually set their time zone in Malaysia where I took them. You can do this with "setting date and time" to the 'Image' (or 'Photos' menu, or however, it is called in English).