Problem of display setting back by default

Similar Questions

• The drop shadow layer style angle setting back to default when reloaded into the new file

  My question is how do to prevent the following occurs. I created a shadow layer style in a file .psd with the parameters below.

  

  I saved it in a file .asl I could use later. When I loaded it in a different .psd file later that day there, some parameters have remained the same, but the angle back to 30 degrees to 120 degrees all on its own, as shown below.

  

  I just want to know how to keep the layer style settings I recorded in a file .asl return parameters when loading in a new .psd file.

  My systems settings are as follows:

  Photoshop CS6 extended Version 13.0 x 64

  Mac OSX 10.8.2 with 705,44 Go off 749,3 GB available

  The only other software I am running is Safari web browser

  This is my first time trying to save a layer style and use it in a .psd file different than the one I created in.

  Kind regards

  Nikki Gutierrez

  First thing you should do is update photoshop help > updates in in photoshop cs6, as many bugs have been fixed and your always on 13.0

  (not that your description is a bug, but version 13.0 had a lot of glitches that will drive you crazy when you meet one)

  Also, overall lighting can be different from one document to the other as you use global light selected in the drop shadow dialog box

  Layer > layer Style > Global light > corner

  See if uncheck Use Global light makes all the difference

  

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• After updating to release 21.0, I'm more able to join a meeting by using Microsoft Lync 2010 online if Firefox is set as my default browser.

  After updating to release 21.0, I'm more able to join a meeting by using Microsoft Lync 2010 online if Firefox is set as my default browser. I am invited to "Join the meeting using your web browser" or "download and install Lync participating." None of these options work. Join using web browser results in a command prompt to install missing plugins, but then no appropriate plugins can be found. Try to install Lync Attendee fails because Lync 2010 is already installed.

  I also tried to install the beta version of Firefox 22.0, but the problem persists.

  Hello ScottRey, please try this: enter about: config in the firefox address bar (confirm the message information where it appears) and search for the preference named plugins.load_appdir_plugins. Double-click it and change its value to true (a restart of the browser may be needed later for the change to take effect). some information on the issue are explained in http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/

• Windows Firewall can be set as the default

  I am running Windows XP - SP3 and Windows Firewall need is running in order to install the latest version of Nero, but after trying all the things offered by Google one not able to make it work.  The result of Microsoft FixIt is the following - "firewall Windows cannot be set as the default firewall.  This problem can occur because of an existing group policy... »

  Can someone tell me how to fix this, please?

  the link worked fine and our web filter now works, this helped a lot thank you very much.

• After you run the fix it scan, get the message 'Windows Firewall may not be set as the default firewall service.

  I received the following message in the fix it running scan.  What should I do?

  "Windows Firewall cannot be set as the default firewall service. This may be because another firewall service is installed or because the Windows Firewall is disabled. »

  Hello

  · What fix it scan are you referring?

  · You have a third-party security software installed on the computer?

  · Who is the service pack installed?

  Run the troubleshooting utility from the link below and check if it helps: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

• How can I get back my default from Itunes to window media

  How can I get back my default from Itunes to window media

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Change the programs that Windows uses by default

  http://www.vista4beginners.com/set-your-default-programs

  Read the above info.

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• How to set a NEW default view in the Explorer of Windows 7?

  [Windows 7 Ultimate 64-bit]

  In Windows Explorer (NOT IE) > component >, how can I set a new default view Permanent, to be: 'Détails' AND 'size all columns to fit. "

  whenever I open Windows Explorer?  I want it to be a change that is automatic & Permanent for all folders, BOTH existing & all new folders I create, every time that Windows Explorer opens.

  Take a look at the following:

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

• Canon MG5450 cannot be set as the default printer, error 0 x 00000709, please help!

  Hello MS community.

  I'm lost, I tried several things to solve this problem, but could not succeed.
  My system is:
  Windows 7 Home Premium SP1, stable and works well with a score of 5.9
  My printer has been installed and deleted 3 times already and I tried both set up as a network printer or a USB connected. At the moment I installed it as a USB, but this will not let me install the default printer.
  First the printer is accessible and print successfully from Word, ACDSee and some other applications but is not recognized by Adobe such as Photoshop & Acrobat products and does not Excel print. I know that this error has been discussed in several other threads, but yet I could not find a solution that worked.
  I tried to repair the registry as following the instructions here about something else:

  (a) click Start.
  (b) type regedit in start search and press enter.
  (c) access the site mentioned below.

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
  
  (d) in the right column, you will find key device, change the value of your printer name.
  (e) it is for example in the format: "HP LaserJet 4250 PCL6, winspool, Ne03:

  (f) right click on the value and click Rename, replace with the name of your printer.

  When I try to change the key it doesn't let me, even if I ran regedit as an administrator. It is said:

  Cannot change the device: error writing to the new content value. I wanted to put: series of Canon MG5450 printer, winspool, draw:

  even if in the example, she said winspool, Ne03. I thought I could leave I had in default.

  i also see another key which is:

  Load REG_SZ C:\Users\-(my user name here)-\LOCALS~1\Temp\mshikra.bat

  This also I do not know what because if I go to this folder this .bat file is not present.

  I also tried this tool:

  http://support.Microsoft.com/mats/printing_problems/

  and when he said will analyze it: series of Canon MG5400 printer is not the default printer, and then I clicked on fix it and id not said, not successful.

  Now I don't know what else to do.

  The only true left to try perhaps would be to reset all the settings of the printer (the printer connects to the home network with the wifi password) may disable the wifi wireless option, if possible. Switch it off and remove all the entries of the printer and try again to install it, but then perhaps on the administrator account.

  ideas? suggestions?

  Hello

  If I understand correctly you are facing problems with the configuration of the default printer. Do not worry, I'm here to help you with this question.

  I would like to know how you're trying to it set the default printer, so that we can help you better.

  Let us try the following methods and check if it works for you.

  Method 1:

  Run the printer troubleshooter.

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Try the steps in the Microsoft Help article and check if it works for you.

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:

  Turn on the Windows Firewall temporarily turned off and then try to print.

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: Disable Antivirus\Firewall temporarily, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  For more information, see the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  Please answer if the steps not help, so that we can better help you.

• Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks

  Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).

  There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.

  It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".

  System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.

  Kind regards

  Lorin Boyack

  Hello Lorin,

  There are several reasons why the built-in Defragmenter may not work correctly:

  Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3: The disc is damaged and must be repaired. Solution:

  a. open "Computer" and right-click on the drive that you want to disable frag.

  b. Select 'Properties' and click on 'tools '.

  c. Select "Check now" to check the drive for errors.

  d. Select the two options and click on 'start '.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

   

  Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I am one of my apps Android AIR of CS5.5 to animate the portage. I can't download on devices running < 4 Android. The problem seems to be that the default Android SDK of AIR conditioning with Animate is version 20, but < 4 Android devices seems to b

  I am one of my apps Android AIR of CS5.5 to animate the portage.

  I can't download it to devices that run Android 2.3.x versions. The problem seems to be that by default what android SDK of AIR conditioning with Animate is version 20, but the devices running Android 2.3.x seem to be stuck on the AIR 19 runtime. I downloaded Android SDK of AIR 19, but when I tried to switch to it using 'manage AIR SDK... "I get an error message saying that I can't upgrade to a version of AIR lower than the preinstalled version. Still, I have many users using devices that run Android < 4 versions and won't leave stranded. What can I do to fix this?

  Yet can the old way to overlay a term I used in CS5.5, be used? I never tried to superimpose an OLDER version of the SDK on CS5.5, then perhaps it would not have worked either.

  In the part of the descriptor XML app Android, you can set the minimum level of SDK, like this:

  This has been very convenient for the times where I wanted to make sure someone is on Android 4.0 or later. But it may be worth trying as a way to override the default used by AIR. You can try to use the 9 or 10, depending on whether you think that your users would have at least to 2.3.4.

  Or, do not worry them, they always take advantage of your old version.

• How to set the field "default" of a quick dashboard to yesterday?

  Hello world
  
  I have a dashboard the guest on a date (full name Date.Date and type Date).
  I also have a simple report with two columns: Date.Date and a measure (whatever the name).
  
  I've managed to filter the day before the current date in the report by adding an advanced SQL filter:
  Date.Date = Cast (TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
  
  Now, I would like to invite him to select the day before the current date by default.
  The filter on Date.Date would be "invited" or more.
  
  How to set the field "Default" from the command prompt?
  
  Thanks in advance

  Hello

  go to the command prompt...
  Select SQL results of as default: drop-down list.
  here... you have to write your SQL logic...
  who uses by default the previous date
  something like that...

  * Select case when 1 = 0 then anydate column of another timestampadd (sql_tsi_day-1, CURRENT_DATE) of the end SubjectArea name*.

  write like this... and report back...

  Thank you & best regards
  Kishore Guggilla

• I have problems to display the Korean characters.

  My Mozilla will display the Korean characters until last week, but now it displays them in the form of the squares with a very small number. I tried all sorts of encodings, but they are not always shown. I am sure that my computers has the support of the East for languages, it properly displays files Korean but in all my browsers (Mozilla, Explorer and Chrome), suddenly, Korean characters are displayed as squares.

  I will be grateful to those who can solve my problem, ' cuz display of Korean language is really important to me.

  I have Mozilla 20 Beta.

  The sounds that you have a problem with the font that is used to display Korean characters if this is the case in all browsers.
  
  You may need to reinstall this font.

  Other East Asian as the Chinese and Japanese languages do still work?

  • http://en.Wikipedia.org/wiki/Help:Multilingual_support_ % 28East_Asian % 29
  • http://www.alanwood.NET/Unicode/unicode_samples.html
  • http://www.Typetester.org/

• Safari doesn't let me set it as default browser in el capitan.

  Safari doesn't let me set it as default browser in el capitan in the Preferences menu. There used to be a button to set it as the default value which is not three more in el capitan osx.

  System Preferences > general > default web browser:

  Click inside the box next to "default web browser:" and choose Safari.

  

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro