Satellite Pro L10 will feed no, no LED display

Similar Questions

• Satellite Pro L10 will not start - the LED blinks

  I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

  It sounds bad
  Generally, the laptop LED flashes as there might be a hardware malfunction.
  The LED provide a microcode and the technician can read this code.
  A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
  That is why it s a good idea to contact the technician in your country

  But as a first step, try this:
  Remove the battery and unplug the AC adapter.
  Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Satellite Pro L10 will not start

  Hi guys,.

  I have a Sat Pro L10 and I have a few problems with it. When I load up, I can enter the BIOS and everything seems fine, however, the date and time does not. I can't ge start beyond that point, it crashes just with a cursor flashing at the top left. The same goes for when I try and boot from CD. When I go out and put the battery back, I get a message saying WARNING CMOS Checksum failed - using the old configuration, F1 to resume or F2 to enter setup. I press F1 and the same again, just a flashing crusor.

  If anyone can help me diagnose this problem and fix it, it would be much more appreciated.

  Best regards
  James

  Hello

  At first read s manual, page 100 as well as page 104. You will find explanations on CMOS Checksum failed.

  To have fully loaded CMOS laptop battery must be powered ON 24 hours.

• Satellite Pro L10 will not start - green turns off after 3 seconds

  Hello

  Having a L10 (PSL15E-01J018EN) and when you press the button, the led ON / STANDBY on the front lights up green for about 3 seconds and then past off the coast. It accomplishes this task for the sector or on battery and there is no other life. Anyone know what may be the problem?

  Thank you

  Melv

  Hello Melv

  Remove the battery, connect your laptop to the power adapter only and try to turn on the L10. If this lets wait a few minutes and put the battery in place and watch if the laptop works as usual.

  Please let us know exactly what is happening.

• Satellite Pro L10 and Windows 7 drivers

  Hi guys,.

  I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
  XP drivers do not work.
  If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

  I look forward to your responses.

  Thanks in advance for your responces
  Panos

  Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
  According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• IRQ conflict on satellite pro L10

  I had problems using a capture card to PCMCIA data with a new satellite pro L10. I used the same card on other laptops with no problems. I think the problem is to do with the conflict on the IRQ channel, because both the card and the controller cardbus use the same channel. I tried to change the IRQ channel manually with the Device Manager, but it does not accept the change. Someone has suggestions how to change the IRQ channel or anything else that might help?

  Hello

  Unfortunately I'm not familiar with this, but please check this article http://kadaitcha.cx/irq_conflicts.html maybe you will find the solution to your problem.

  Good luck!

• Can not get my Satellite Pro L10

  I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

  Hi James,

  Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

  Kind regards

• Upgrade memory for Satellite Pro L10

  Can I add 512 MB to 256 MB of memory already on my laptop? And also what is the name of the memory supported by Satellite Pro L10.

  Thanx
  Femi

  Hi Fernando,

  Your L10 has two available memory slots and will support up to 2 GB of RAM (2 X 1 GB modules).

  Check the following URL for details of compatible modules for your laptop: -.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11979&ft=m&St=3

  HTH

• Satellite Pro L10: Question about saving the files on a CD

  Please can someone tell me how I can save a typed document (produced in Word or similar) on the CD? I don't have a floppy drive on my satellite pro L10 portable. Have 'saved' music using the immediate recording before, but now need to record your actual work on the hard disk for transport to a pc with access to a printer.

  When I tried it told me incorrect function, contact administrator (that's me!) I tried CD - R and CD - RW discs and neither would not let me save the file on it. would be grateful for any advice regarding this.

  Thank you

  Hi Roy,

  First of all, you will ned to ensure that you have enabled logging on oprical drive you. For this a right-click on the CD-ROM in my computer icon and then selecting "properties-> recording. Make sure that "Enable CD writing on this drive" is checked.

  Once you have done the above, you can simply drag the documents that you want to copy on the CD-ROM icon in my computer.

  Note that the burning process does not happen immediately. Windows caches the files to be placed on your hard drive first and then you can burn all documents cached only once.

  Alternatively, you may find that some third-party software has been bundled with your portable computer, which performs a similar function the standard Windows CD burn software.

  Kind regards

• Replacing the screen for Satellite Pro L10

  The screen is cracked badly on my Satellite Pro L10. About how much can I expect to pay for a replacement within the United Kingdom. Is this something that I can wait to replace me with a screwdiver and some care?

  How much would a complete hull and the screen?

  Where can get me a - Toshiba service center my best bet?

  Hello

  The fact is that the screen of the laptop is one of the most expensive neighborhoods that are installed on the laptop.
  But unfortunately, I do not know what will cost repletion.
  This information you won't get form the Toshiba service partner in your country.
  I recommend you ask the service partner.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• FAN of buzz on my Satellite Pro L10

  After 30 to 60 minutes of work to the fan on my Satellite PRO L10-PSL15E hum early, or else close to her. The buzz stops when I press on the body of the laptop, but only for a short time and then starts again. Need help for sorting!

  Hi Ruslan,

  You can access options from Control Panel-> Performance Toshiba power management and management. Normally, this will show both the Microsoft Options, but also the Toshiba ones.

  Kind regards

• Satellite Pro L10 cut just randomly

  New satellite Pro L10, with XP Pro and Linux dual boot.

  Randomly, sometimes once a week, sometimes several times on, it will just cut. Just Litrally disable itself (as there is no power?). Occurs in Windows and Linux.

  Subsequently, I constantly press the power button so he can go back on. Yes, fully charged. Occurs when it is connected as well.

  Any suggestions?

  Thank you

  Hello

  For me it's s like an overheating problem.
  If the temperature drops to the critical limit the operating system the device automatically stops.
  The cooling fans simply cleaning with a vacuum cleaner to solve these issues.

• Intermittent WiFi on Satellite Pro L10 D WAP - Link

  Equipment: new Satellite Pro L10 with Centrino & integrated Intel Pro 2200BG wifi and D-Link DWL2100Ap wireless access point. The new laptop works on the neighbor's wireless network (all day), and my Sony notebook working on our D-Link network based. However the new Toshiba works for awhile the first thing in the day (maybe 2 hours) and then stops working at an increasing rate. The afternoon he will not work for more than about one second.

  For most, however, the icon says that it is connected and free config says that it is connected; See her ranges from wireless networks - different bits of the system are in disagreement on the status of the connection, but no data flow.

  The D - link WAP has always said he has the Toshiba as a customer. Select 'repair' normally runs for a second or two.

  He always seems to have a number allocated IP, IPCONFIG - however, if I try to connect later in the day and is already having an IP address, it may not stay connected for long enough to get a.

  Very frustrating. Any help appreciated.

  Hello

  Well it s very strange.
  You said that the work of laptop on the neighbouring s wireless very well.
  In this case I n t think that it s a problem with wireless network card.
  Try to check your router settings.
  Maybe you can compare your settings with the neighbors.

  Good bye