Problem of DVD on a Satellite 1950 801
Hello
DVD player (Mat * a UJ - 810) of my Toshiba Satellite 1950 801 recently stopped recognizing any DVD inserted media (rewritable, registered or manufactured). However, it seems to work correctly with the CD, CD - r and CD - RWs. everything also seems normal in the control panel (I'm under Win XP Home, btw).
I wonder if it's probably a software problem (a driver or a program that must be running) or a hardware store. I need to replace the DVD drive?
Thank you very much in advance for your answers.
Hello
Optical drive needs to change the phase of laser reading/writing DVD from the one he uses for CDs. It is possible that he can no longer do this properly.
Before you replace it, attempt to remove the optical drive from Device Manager, and then restart your system. The optical drive should be detected and re-installed with drivers, etc.. If she is still unable to properly read the DVD then it's a pretty safe bet that the unit should be replaced.
Kind regards
Tags: Toshiba
Similar Questions
-
Drive cdrw/dvd satellite 1950 801
Where can I find a list of compatible cdrw/dvd player for
My Satellite 1950 801?Thank you
Hello
Visit the following site and check what type of drive you have. You can then choose a fitting replace drive!
http://www.Toshiba-Europe.com/storage/index.asp?nav=Hom&page=Hom&frame=home -
Display driver Satellite 1950 801
When did go be a upgrade for my nvidea display driver?
I can't play collin mcray rally 4.0 due to the fact that my display driver is not upgraded.can you help me thnx
send me an e-mail: [email protected]Hello
After awhile the driverupdate for a laptop will be reduced to a minimum. Righteous updates resolve the big problems that will come out.
This procedure is every time the same thing. If you buy a computer, Notebook, PDA for example.
But you can look for other cell phones ("most recent") with your graphics card in it.
The Satellite 1950 801 has a nVidea Geforce4 Go 460 aboard.
I have this graphics card sought and found that Toshiba had made another series called Satellite 5200 (701,-801,-901).
Of course, you can watch if this driver is more recent.
But attention! I Don t give no guarantee that all series of perfect with this 'the driver update procedure '. We can dispense with the craziest things!
I know what I'm talking about, I have the also a Satellite 1950-801.
Good bye
-
Satellite 1950 801 does support WLan?
Is Toshiba 1950-801 charge wireless network? And how do I install the driver for it.
Note: I have the on/off switch for the wireless in the front of the laptop
According to some information in the net, the WLan on the Satellite 1950 801 is optional.
This means that some laptops have been delivered with the WLan and others not.In your case if you are not sure 100% if your laptop has built in wireless minPCI network card then I recommend to check the Device Manager. The WLan card network adapters should be registered if it was already installed on your laptop.
-
Question about VGA PCMCIA satellite 1950 801
Anyone know if it is the PCMCIA VGA card with chipset market later than nvidia geforce 460 go to upgrade my satellite 1950 801 (with nvidia geforce 460go)?
Thanks in advance
The best unfortuantely adapter Pcmcia you get for PCMCIA is 4 MB of video memory. This is because the size and heat all became issues and could not get into a PCMCIA card.
Sorry, it's not that you can do.
-
Satellite 1950 801 - battery, wireless keyboard does not charge either
Toshiba Satellite S1950-801
The charge of wireless keyboard battery is no longer, the powerbutton doesn't work anymore, what can I do?
I know that the computer is old, but maby it is a solution for this problem.
> The battery to the charge of wireless keyboard is more, the power button doesn't work anymore, what can I do?
You are not able to turn on the laptop?
HM looks like a laptop computer s hardware problem and maybe that is the reason why external Wlan keyboard don't invoice not the laptop is dead and so the keyboard do not workWhy the laptop does not power upward?
Hmmm. issue of goo. Perhaps the AC adapter is dead and can not provide the power of portable and laptop battery is dead too.
This is possible, but in most cases it s not the reason why in most cases, the motherboard could be defectiveHowever, only the laptop technician can check the hardware parts and could provide more details
-
Satellite 1950 801, my laptop does not work
Sorry for my bad English...
When I start my laptop (push the botton) the screen is black!
I do not see the TOSHIBA logo... and nothing else!
The laptop is turned on (the green light is on) but the disk does not work.it similar to a sleep state.
No BIOS, no windows...
SO I switch off the power sector and battery to turn off the cell phone!
Hel me!
I have a TOSHIBA 1950-801Help me!!
Hi Mauro,
your problem is very difficult because you do not see the Toshiba logo. When you push power button, watch closely to your LEDs. There is an opportunity of the NB emits a flashing code. The Toshiba Service partner could help interpret the Code and locate the problem.
Good bye
chris_cool -
Trouble with Satellite 1950 801 (BIOS ver 1.7)
I've updated the bios. Old 1.3, latest version is 1.7
After bios udate - advance 97 device could not start and does'nt modem working :(
Where can I find the BIOS ver. 1.3
I don't want to use the most recent bios because there are problems... Help, please! My computer is my job!
Can u send me ver Bios 1.3 for 1950-801?Hello
How Miro said. It of not possible to downgrade the BIOS (ie. of 1.7 to 1.3)
Only the service partner can do with special software. But I m unaware of this procedure and tools :(
If you want to downgrade the BIOS that you have to say the technique. Just tell him that you want to have the old version of the BIOS.Good bye
-
New 120 GB HARD drive is recognized in Satellite 1950 801
Hello
I have a Toshiba Satellite S1950 801 and I want to spend my 60 GB HDD of origin with another 120 GB.
They have the same features, but when I install the new hard drive, I have the following message:Realtek RTL8139X pci fast ethernet controller
PXE - E61: media test check the cable failure
PXE - MOF: exit intel PXE ROMeven if the network startup is disabled...
Can you help me please?
Have you checked if the new HARD drive is seen in the BIOS?
From my own experience, this message appears because the BIOS does not recognize the new HARD drive and then the laptop trying to boot off the last option that is; LAN.
In my view, the size of new HARD drive is just too big.
Usually, the BIOS supports a limit on the size of HARD drive and so the biggest hard drives are not recognized properly.I recommend you test a HARD drive with a smaller size; Perhaps an 80 or 100 GB would be possible.
Best regards
-
Change the drive DVD on a Satellite 1410 801
Hi all
I want to change my dvd player for dvd writer 'toshiba SD-R6472U' on my toshiba 1410-801!
I opened the laptop and the drive! right now the problem ;) beging
I can see in the bios option "already changed" HARD and the DVD drive, but once past the toshiba screen seems to say "IDE 1 #error" error message. and the dvd player appears not in the "my computer" I tried to put a jumper to put the HARD drive in salve, master mode and cable select anyway even problem!
Greetings to all and waiting for your help!
Hello
It seems that you bought the disc is not compatible!
It is not recommended to connect any pin on the new drive code!
I would like to invite your dealer where you bought the player and ask a new compatible.
The fact is that if you destroy the drive, you lose the drive, warranty and money! -
Problems burning DVD with my Satellite L350D disc - 20 d
Hello
I have problems with burning DVDs on my dvd recorder in computer laptop satellite L350D-20 d
> Drive 1 - Info: TSSTcorp CDDVDW TS - L633A TO03 (f) (ATA)
I'm trying to update my firmware from here:
http://www.x-drivers.com/catalog/bios_firmware/optical_drives/companies/Samsung/models/TS-L633A/index.htmlBut even the TO03 version does not...
I only see message saying drive Cant find Suisable or Drive not suported ect ect...I've been try loking for simple drvier but it looks like there is not no lol
Hello
Don't you know that the use of the incorrect firmware or not is not compatible would be detrimental to your CD/DVD drive?
You should only use the firmware provided by Toshiba.I checked the page European driver of Toshiba and found 6 different firmware updates.
There are updates for the reader:
TS-L633P, TS-L633A DVRTD08A, DVRTD08L, TS-L632P TS-L632HYou got the message because it seems that you used the wrong firmware or is not compatible!
So if you want to Flash the firmware using the Toshiba files European page:
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jspby the way: some disc can cause some problems if different test types of disks from different manufacturers.
-
Satellite 1950 801, flashing display
Hello!
If I work for a long time with my laptop, the screen starts to Flash.When I move the swing display cover, the fault disappears.
Does anyone have any idea what wrong with my camera?
Card display, connection problems?
Thank you
Hi Toto,
I think that it s a connection problem. My Satellite 1900 series
had similar problems.Terence bye
-
Carpet * a DVD-Rom [Toshiba Satellite 1950 S902] drive
Hi all
My DVD Drive Does not read the DVD + R and therefore does not write on them. I wonder if there is no frameware or something, or maybe my drive supports DVD + R. It supports DVD-R only.Thank you...
Hi Hossam Aldin,
Sorry, I have to tell you that your DVD burner only supports the following features
Read:
CD-ROM, CD - R 24xMax
CD - RW 12xMax
DVD-ROM 8xMax
DVD - R, DVD - RW 8xMax
DVD-RAM 2xMax
To write:
CD - R 16xMax
CD - RW 4xMax
DVD-R 1xMax
DVD - RW 1xMax
DVD-RAM 2xMaxIf you could see there is no /AR DVD + R support to read and write!
Bob77 Bye
-
DVD player has stopped writing DVD on my Satellite 5200 801
Quick question that I hope someone knows the answer to. My DVD player stopped earlier for DVD writing (several relocations of system have proved that it is the reader and not a pilot/conflict error) so I put the hand on another drive. Fitting was easy, however, it seems that there is something funny with the ide channel configuration in this laptop. The old drive was put on CSEL, however, the new drive is set as slave. because of this the HD or the DVD player are available.
Does anyone know how to pass to CSEL dvd players to make them work (I tried to put the jumpers on the hard drive to change between a master and a slave, but with no joy.)
Thanks in advance
John Walker
Hi John,.
Normally, the readers of CD/DVD design slim are preset by the manufacturer, but it is apparently possible to change the setting, if you really want to. Please check the following post: -.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5946&MessageID=20727#20727
HTH
-
Hello.
I have a Toshiba Satellite 1950 801.
Beyond the keyboard is a case that seems to be the place to insert the optional wireless network card.I have the button to enable and disable the wireless card, but without the card it doesn't do much.
What is the format of the wireless card? Where can I buy one?
Tanks
Hello
I found information on your device and it seems that you can upgrade the laptop with a wireless Mini PCi Card. Wireless on this unit standard is 802. 11B. In addition the PA3212U-4MPC is a 802. 11 b but I m not 100% sure if it s compatible.
I found other compatible cards:Wireless LAN Mini PCI Card (2, 4 GHz, 802. 11a / b) PA3273U-1MPC
Wireless LAN Mini PCI Card (2, 4 GHz, 802 11 b) PA3212U-3MPC
Wireless LAN Mini PCI Card (2, 4 GHz, 802 11 b) PA3212U-2MPC
Wireless LAN Mini PCI Card (2, 4 GHz, 802 11 b) PA3212U-1MPCHowever, you can ask the service partner for more detailed information.
Best regards
Maybe you are looking for
-
I need the Hp Laserjet M2727nf Hp scanning software
Need a Hp Laserjet M2727nf Hp scanning software
-
On the new printer HP PageWide, if I don't have that infrequent use, ink clog or dry as it does on inkjet?
-
G2 HP 255: drivers for the proper functioning of the network
Hello I could not find the following hardware ID VEN_168C & 217f103c & rev_01 subsys dev_0036 VEN_10EC & 2192103c & rev_01 subsys dev_5229 ACPI\VEN_HPQ & DEV_6001 ACPI\VEN_ASD & DEV_0001 Thanks in advance Bests Nikoloz
-
How to activate the STD 4 K on discreet NVidia card with XPS 15
I have a laptop Dell XPS 15 (9530) with both the discrete Nvidia GeForce 750 M (2 GB) & integrated 4600 Intel graphics cards. I also have a Dell UP2414Q external connected via a cable DisplayPort 1.2 (1.2 is enabled on the screen). It is running Wind
-
My costs only 79 battery life after I clicked on something other than the spose to extend life
OK, so I was just on my Samsung laptop then something pops up saying you want to extend your life of the battery, or something in that sense and it is a program that has been in the computer from the beginning. I found the autonomy to extend it and i