Satellite 1950 801, flashing display
Hello!
If I work for a long time with my laptop, the screen starts to Flash.
When I move the swing display cover, the fault disappears.
Does anyone have any idea what wrong with my camera?
Card display, connection problems?
Thank you
Hi Toto,
I think that it s a connection problem. My Satellite 1900 series
had similar problems.
Terence bye
Tags: Toshiba
Similar Questions
-
Display driver Satellite 1950 801
When did go be a upgrade for my nvidea display driver?
I can't play collin mcray rally 4.0 due to the fact that my display driver is not upgraded.can you help me thnx
send me an e-mail: [email protected]Hello
After awhile the driverupdate for a laptop will be reduced to a minimum. Righteous updates resolve the big problems that will come out.
This procedure is every time the same thing. If you buy a computer, Notebook, PDA for example.
But you can look for other cell phones ("most recent") with your graphics card in it.
The Satellite 1950 801 has a nVidea Geforce4 Go 460 aboard.
I have this graphics card sought and found that Toshiba had made another series called Satellite 5200 (701,-801,-901).
Of course, you can watch if this driver is more recent.
But attention! I Don t give no guarantee that all series of perfect with this 'the driver update procedure '. We can dispense with the craziest things!
I know what I'm talking about, I have the also a Satellite 1950-801.
Good bye
-
Satellite 1950 801 does support WLan?
Is Toshiba 1950-801 charge wireless network? And how do I install the driver for it.
Note: I have the on/off switch for the wireless in the front of the laptop
According to some information in the net, the WLan on the Satellite 1950 801 is optional.
This means that some laptops have been delivered with the WLan and others not.In your case if you are not sure 100% if your laptop has built in wireless minPCI network card then I recommend to check the Device Manager. The WLan card network adapters should be registered if it was already installed on your laptop.
-
Drive cdrw/dvd satellite 1950 801
Where can I find a list of compatible cdrw/dvd player for
My Satellite 1950 801?Thank you
Hello
Visit the following site and check what type of drive you have. You can then choose a fitting replace drive!
http://www.Toshiba-Europe.com/storage/index.asp?nav=Hom&page=Hom&frame=home -
Problem of DVD on a Satellite 1950 801
Hello
DVD player (Mat * a UJ - 810) of my Toshiba Satellite 1950 801 recently stopped recognizing any DVD inserted media (rewritable, registered or manufactured). However, it seems to work correctly with the CD, CD - r and CD - RWs. everything also seems normal in the control panel (I'm under Win XP Home, btw).
I wonder if it's probably a software problem (a driver or a program that must be running) or a hardware store. I need to replace the DVD drive?
Thank you very much in advance for your answers.
Hello
Optical drive needs to change the phase of laser reading/writing DVD from the one he uses for CDs. It is possible that he can no longer do this properly.
Before you replace it, attempt to remove the optical drive from Device Manager, and then restart your system. The optical drive should be detected and re-installed with drivers, etc.. If she is still unable to properly read the DVD then it's a pretty safe bet that the unit should be replaced.
Kind regards
-
Question about VGA PCMCIA satellite 1950 801
Anyone know if it is the PCMCIA VGA card with chipset market later than nvidia geforce 460 go to upgrade my satellite 1950 801 (with nvidia geforce 460go)?
Thanks in advance
The best unfortuantely adapter Pcmcia you get for PCMCIA is 4 MB of video memory. This is because the size and heat all became issues and could not get into a PCMCIA card.
Sorry, it's not that you can do.
-
Satellite 1950 801, my laptop does not work
Sorry for my bad English...
When I start my laptop (push the botton) the screen is black!
I do not see the TOSHIBA logo... and nothing else!
The laptop is turned on (the green light is on) but the disk does not work.it similar to a sleep state.
No BIOS, no windows...
SO I switch off the power sector and battery to turn off the cell phone!
Hel me!
I have a TOSHIBA 1950-801Help me!!
Hi Mauro,
your problem is very difficult because you do not see the Toshiba logo. When you push power button, watch closely to your LEDs. There is an opportunity of the NB emits a flashing code. The Toshiba Service partner could help interpret the Code and locate the problem.
Good bye
chris_cool -
Satellite 1950 801 - battery, wireless keyboard does not charge either
Toshiba Satellite S1950-801
The charge of wireless keyboard battery is no longer, the powerbutton doesn't work anymore, what can I do?
I know that the computer is old, but maby it is a solution for this problem.
> The battery to the charge of wireless keyboard is more, the power button doesn't work anymore, what can I do?
You are not able to turn on the laptop?
HM looks like a laptop computer s hardware problem and maybe that is the reason why external Wlan keyboard don't invoice not the laptop is dead and so the keyboard do not workWhy the laptop does not power upward?
Hmmm. issue of goo. Perhaps the AC adapter is dead and can not provide the power of portable and laptop battery is dead too.
This is possible, but in most cases it s not the reason why in most cases, the motherboard could be defectiveHowever, only the laptop technician can check the hardware parts and could provide more details
-
Trouble with Satellite 1950 801 (BIOS ver 1.7)
I've updated the bios. Old 1.3, latest version is 1.7
After bios udate - advance 97 device could not start and does'nt modem working :(
Where can I find the BIOS ver. 1.3
I don't want to use the most recent bios because there are problems... Help, please! My computer is my job!
Can u send me ver Bios 1.3 for 1950-801?Hello
How Miro said. It of not possible to downgrade the BIOS (ie. of 1.7 to 1.3)
Only the service partner can do with special software. But I m unaware of this procedure and tools :(
If you want to downgrade the BIOS that you have to say the technique. Just tell him that you want to have the old version of the BIOS.Good bye
-
New 120 GB HARD drive is recognized in Satellite 1950 801
Hello
I have a Toshiba Satellite S1950 801 and I want to spend my 60 GB HDD of origin with another 120 GB.
They have the same features, but when I install the new hard drive, I have the following message:Realtek RTL8139X pci fast ethernet controller
PXE - E61: media test check the cable failure
PXE - MOF: exit intel PXE ROMeven if the network startup is disabled...
Can you help me please?
Have you checked if the new HARD drive is seen in the BIOS?
From my own experience, this message appears because the BIOS does not recognize the new HARD drive and then the laptop trying to boot off the last option that is; LAN.
In my view, the size of new HARD drive is just too big.
Usually, the BIOS supports a limit on the size of HARD drive and so the biggest hard drives are not recognized properly.I recommend you test a HARD drive with a smaller size; Perhaps an 80 or 100 GB would be possible.
Best regards
-
Hello.
I have a Toshiba Satellite 1950 801.
Beyond the keyboard is a case that seems to be the place to insert the optional wireless network card.I have the button to enable and disable the wireless card, but without the card it doesn't do much.
What is the format of the wireless card? Where can I buy one?
Tanks
Hello
I found information on your device and it seems that you can upgrade the laptop with a wireless Mini PCi Card. Wireless on this unit standard is 802. 11B. In addition the PA3212U-4MPC is a 802. 11 b but I m not 100% sure if it s compatible.
I found other compatible cards:Wireless LAN Mini PCI Card (2, 4 GHz, 802. 11a / b) PA3273U-1MPC
Wireless LAN Mini PCI Card (2, 4 GHz, 802 11 b) PA3212U-3MPC
Wireless LAN Mini PCI Card (2, 4 GHz, 802 11 b) PA3212U-2MPC
Wireless LAN Mini PCI Card (2, 4 GHz, 802 11 b) PA3212U-1MPCHowever, you can ask the service partner for more detailed information.
Best regards
-
Satellite 5200-801-indicator of battery flashes orange while dc is green
I have SATELLITE 5200-801, the battery light flashes orange while the domain controller is green and the laptop works
stop when it is off.
the battery is empty.I can't boot from external USB cdrom to install windows as its internal DVD does not work
Help, please
> Ok I fix the battery problem was feeding me to change.
Nice to hear that! :)> But I still can't start external USB cdrom
Have you checked if your laptop computer (BIOS) supports booting from an external USB drive? I doubt it would be possible on old Satellite 5200. If you exchange your CD-ROM drive. You can look on eBay for the part of second hand, they are a little cheaper. :) -
Satellite M30-801 - display will not work after hibernation
Hello everyone,
I hope that you will help me with this problem. I have a Toshiba Satellite M30-801 and my warranty is over.
A few days ago my computer was a few hours of standby. When I rebooted the system, the screen has continued on a black background. No images.
I am connected to an external monitor to check the video card and this test has been authorized. Now, I'm writing this letters using my laptop connected to the external monitor.
Also, I noticed that there is blacklight on the screen.I had checked the power management for the controllers of USB bus on the control panel.
I downloaded and installed the latest update of the bios.
But the screen remains black.
Could you help me? any ideas?
Thank you and best regards,Stalker99ES
When you start your laptop without external display can you see anything?
When you use external monitor that happen when you try to change the display mode by using the FN + F5 key combination? -
Satellite 5200-801-failure of graphics HW
Hello
Is it possible to change the graphics card to a Satellite 5200 801? Or it is part of the motherboard, means, I need to change the mothermoard? If it is possible, what is probable invest?
Question:
My graphics card appears to show a HW failure. After that turn on the screen of the laptop shows the thin vertical lines and it starts flashing after a few seconds.During the startup of Windows XP, the machine meets a bluescreen detection of problems with the nvidia device.
When I start the laptop mode safe, the notebook starts up and I'm able to evidence with the Manager of Windows hardware, Windows detects a HW problem with the graphics card.
So I'm sure it's the graphics card or the video RAM. Even playing with the video modes do not change or correct the problem. Also the video mode with the highest resolution is no longer available.
The LCD display is new. I changed it with a new 3 months ago.
Thanks in advance,
MacSobeckHello
The Satellite 5200 801 was delivered with an nVidia GeForce4 460Go 64 MB graphics card.
But as far as I know it of not possible to change the graphics chip. This small chip is attached to the motherboard.
I guess that it of necessary to replace the motherboard. -
Hello.
My DVD-RAM Satellite 1950 drive - 801 is having a few problems.
I wonder if I need to change it to one that is exactly the same... In other words... Can I change to a CD-RW/DVD drive instead?
Do I need to buy the Toshiba disk?
Thank you
Hello
Well, you can change the player to another, but make sure that your device is supported by the player. Some CD/DVD players have occupation different pins.
If you want to buy the car, I recommend to contact the service partner and ask them a compatible part.Good bye
Maybe you are looking for
-
I need to run an engine control (NEMA 17) for a number of steps with maximum possible speed controlled using myRIO. When I used Digital out to produce the wave square for the stepper, the maximum speed obtained was 500 meters per second when I used 1
-
How to get a file created by windows labview to work on a mac
I try to open a data acquisition simple vi which was written in Labview 2009 for Windows, using the USB 6211 material. I installed Labview 2010 for Mac OS X (full) with NIDAQMX-Basic for Mac. The problem is that none of the sub - vi DAQMX opens corre
-
problem with multiple trace files
Hey! I saved a text file with four columns and I want to replot two of all the required columns. I tried the logic below, but there seems to be a problem. The graph shows very few samples. Check if my logic is correct. Thank you
-
The glass is normal, telling me 'copy' and 'simple letter '. When I print, it comes out grey. I can't change the cartridge except tells me the glass.
-
I'm scanning my computer. I have Windows 10. Where are my scans?
Everything seems to work with the scanner. But I can not find my scans (Windows 10).