Problem of FaceTime with a specific person

Similar Questions

• Problem downloading file with the specific file name

  I have built a graphical interface that allows the user to enter a (using IRite for editing) press release and have it upload to the server. It needs to be uploaded to the server using a specific name that the user selects from a drop down list. It is not working and I don't know why. Can someone take a look at my code and see if they can spot something? Thank you.

  assuming that, as in your original post, you use a component textarea with
  NAME = "commonality" for text entry, all you need is:

  If your drop-down list box file name contains only the part name and number
  extension (i.e. "mynews" instead of "mynews.cfm"), then add & ".cfm".
  After form.filename in the destination tag cffile above attribute.

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com/

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Problems of reproduction with Windows Media files Format AVCHD.

  reproducing can´t audio track on videos recorded in AVCHD format. The computer has windows 7 starter edition and windows media 12. We see only the video tracks.

  The same file (AVCHD format) have been reproduced without any problem, halfway another portable computer with the same version of Windows Media and Windows 7 Professional (12).

  Is there something that can I do.

  Hi Ulises,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you can't play as AVCHD file format in Windows 7.

  It seems that the AVCHD file format is not supported by Windows media player.

  You can determine which codec was used with a specific file; read the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the Audio codec and Video codec sections.

  Then you can uninstall any installed codec and install that you need to do the job file.

  If you have several codec for the single file to work they can clash and cause problems.

  You can check the link for assistance on the issue - below

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Hi, I just upgraded from 6.1 to 6.4 LR LR. When importing new files LR6.4 cannot rename my files with a specific date format (import uses only the original name).

  Hello

  No problem with the LR 6.1, but now (LR6.4), it seems impossible to rename my files with a specific format (yyyy-dd-hhmmss and a suffix) importing memory cards. LR imports only files with names of origin. And I have a lot of files to rename...

  I hope that someone knows what's going on.

  Jean

  Jean,

  We found a similar question which is being implemented. If you shoot images at once in the first and jpg format and then import them using the option of renaming, the question is in place.

  Could you please check if you use the option "make a second copy? If so, please it deselect. It should solve the problem.

  The issue is addressed in Lightroom.

  Thank you

  Sunil

• How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  Hello

  My son has Adobe Photoshop CS6 when he attended a school for dyslexia and disorders on the autism spectrum with software for students in the United Kingdom.

  He has used with success of this edition.

  I have the codes on the box but didn't post here not sure of what?

  He moved to one-sixth of the Collyers in Horsham college and had to buy a new laptop. The College being all Apple we brought a pro IMac.

  He studied art, graphics and media education.

  It is a challenge for a person with an age of 7 years in reading! Spell checking in the Photoshop really helped his presentation work. The IMac has the recognition voice very good text.

  It will be if everything's going to be all right on to art College to study graphics.

  The problem is that he must now get his Photoshop on his new laptop computer and the version that he only works on Windows.

  It is possible to send a new code for the CS6 works on his laptop?

  In the future it will need to Photoshop and Illustrator professionally, but at this level, we cannot justify paying a monthly fee for the latest version.

  Hope you can help.

  Regarding the contact with a real person who can help, which will be necessary for you to follow through with what you want so be prepared to have your exercised patience and hope that it is not.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• There is a problem of storage with the data path [path to hard] store

  I have two sites connected by using a VPN connection over a WAN link. In each site, I have an esxi with several VMS host and operation of replication device of vSphere (v 5.1.1.0 Build 1079383) in each site. In each site, these is also a vCenter server with the device of RVS registered and logged with the other site. All the virtual machines are configured to replicate to the other site.

  In my initial configuration of the RV (first install) site remote had 2 vNIC used for the management and I figured it was my problem with replication (see kb2040302). So I have changed since my host configuration from the remote site to have that single vnic management (does not solve the problem). I then registered, removed and reinstalled the VR device without change to the problem.

  What is going on:

  1. I am able to configure replication between sites without a problem.

  2. first replication occurs between sites and reports a success.

  3. the remote VM replication to the main site continue to work properly and all is well for the days and continue to work.

  4. the main site of VM replication to the remote site fails on the second and all attempts to reproduce the error. There is a problem of storage with datastore path '[datastorename] '.

  

  I followed the advice of kb2040302 better as I can. But I must confess that I could use some of the more detailed instructions on how and what site should I check the logs. and how to check my configuration management vnic.

  I'm looking for someone provide additional troubleshooting steps with good detail.

  Thank you

  
  

  Resolution:

  The problem was caused by a security setting on the NFS Server data store. VRA could not delete the (hard).

  Specifically, my problem was with authorizations on the Synology NAS under the application of the "file Station.

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• Flex 4: problems of Module with the mx AdvancedDataGrid

  Hello

  I have a modular application. SDK is 4.5 Hero.

  The main application loads a module and receives interface components user thereof, which are displayed thereafter.

  In general, the component, returned from the module displays OK with mx components and spark.

  However, if I add AdvancedDataGrid I get the exception:

  --------------------------------------------------

  TypeError: Error #1007: instantiation attempted on a non-constructeur.

  at mx.controls::AdvancedDataGridBaseEx/getSeparator() [E:\dev\hero_private_beta\frameworks\pr ojects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4619]

  at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators() [E:\dev\hero_private_beta\fra meworks\projects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4661]

  at mx.controls::AdvancedDataGrid/createHeaderSeparators() [E:\dev\hero_private_beta\framework s\projects\datavisualization\src\mx\controls\AdvancedDataGrid.as:2428]

  at mx.controls::AdvancedDataGridBaseEx/drawSeparators() [E:\dev\hero_private_beta\frameworks\ projects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4575]

  at mx.controls::AdvancedDataGridBaseEx/updateDisplayList() [E:\dev\hero_private_beta\framewor ks\projects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:2120]

  at mx.controls::AdvancedDataGrid/updateDisplayList() [E:\dev\hero_private_beta\frameworks\pro jects\datavisualization\src\mx\controls\AdvancedDataGrid.as:2899]

  at mx.controls.listClasses::AdvancedListBase/validateDisplayList() [E:\dev\hero_private_beta\ frameworks\projects\datavisualization\src\mx\controls\listClasses\AdvancedListBase.as:3472]

  at mx.managers::LayoutManager/validateDisplayList() [E:\dev\hero_private_beta\frameworks\proj ects\framework\src\mx\managers\LayoutManager.as:719]

  at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\hero_private_beta\frameworks\pr ojects\framework\src\mx\managers\LayoutManager.as:778]

  at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\hero_private_beta\frame works\projects\framework\src\mx\managers\LayoutManager.as:1157]

  ---------------------------------

  The compiler option is - keep-all-type-selectors. It works very well with the mx:DataGrid and all other components for example, but not with AdvancedDataGrid.

  My application has the following structure:
  TestLibrary - a library application containing a single interface:
  test. IModuleComponent
  Code:

  test package

  {

  Import mx.core.UIComponent;

  public interface IModuleComponent

  {

  function getComponent(): UIComponent;

  }

  }

  TestModule - an application of module, using TestLibrary as an EPIRB.

  Components:

  -test.module.TestModule.mxml

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:Module ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  " xmlns:s = 'library://ns.adobe.com/flex/spark"" "

  "" xmlns:MX ="library://ns.adobe.com/flex/mx" width ="100%" height = "100%"

  implements ="test. IModuleComponent"xmlns:module =". test.module *">" "

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.core.Application;

  Import mx.core.UIComponent;

  Import spark.components.Application;

  test import . IInstanceFactory;

  public function getComponent(): {UIComponent

  return new TestComponent();

  }

  []] >

  < / fx:Script >

  " < s:VGroup width ="100%"height ="100%">

  " < s:Label text = 'Module of Test" / > "

  " < module: TestComponent width ="100%"height ="100%" / >

  < / s:VGroup >

  < / mx:Module >

  -test.module.TestComponent.mxml

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:VGroup ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  "xmlns:s ="library://ns.adobe.com/flex/spark"

  "xmlns:MX ="library://ns.adobe.com/flex/mx"

  width ="100%" height ="100%">

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.collections.ArrayCollection;

  [Bindable]

  private var dpADG:ArrayCollection = new ArrayCollection([)

  {Artist:'Ground', Album:'Slanted and enchanted', price: 11.99},.

  {Artist:'Ground', Album:'Brighten the corners', price: 11.99},.

  {Artist:'Healthier', Album:'A child once', price: 11.99},.

  {Artist:'Healthier', Album:'Helium wings', price: 12.99},.

  {Artist:'The doors', Album:'The doors', price: 10.99},.

  {Artist:'The doors', Album:"Morrison hôtel", price: 12.99},.

  {Artist:' Grateful Dead ', Album:' American Beauty ', price: 11.99},.

  {Artist:' Grateful Dead ', Album:'In the Dark', price: 11.99},.

  {Artist:' Grateful Dead ', Album:' Shakedown Street ', price: 11.99},.

  {Artist:'The doors', Album:' Strange Days ', price: 12.99},.

  {Artist:'The doors', Album:'The best of the doors', price: 10.99}

  ]);

  []] >

  < / fx:Script >

  " < s:Label text = ' Test data grid" / > "

  < mx:AdvancedDataGrid

  width ="100%" height ="100%"

  "sortExpertMode ="true"

  dataProvider ="dpADG{}">

  < mx:columns >

  " < mx:AdvancedDataGridColumn dataField ="artist" / > "

  " < mx:AdvancedDataGridColumn dataField ="Album" / > "

  " < mx:AdvancedDataGridColumn dataField ="price" / > "

  < / mx:columns >

  < / mx:AdvancedDataGrid >

  < / s:VGroup >

  -----------------------------------------
  TestComponent is used twice:
  (1) in the module itself
  (2) in function getComponent(), who comes from the IModuleComponent interface.
  TestWebApp - the main web application.
  TestWebApp.mxml:

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:Application ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  " xmlns:s = 'library://ns.adobe.com/flex/spark"" "

  " xmlns:mx = 'library://ns.adobe.com/flex/mx"" "

  minWidth ="955" minHeight ="600">

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.charts.chartClasses.InstanceCache;

  Import mx.core.UIComponent;

  test import . IModuleComponent;

  private onButtonClick() function : void {}

  var app: IModuleComponent = testModule.child as IModuleComponent;

  var testComponent: UIComponent = app.getComponent ();

  group.addElement (testComponent);

  }

  public function createInstance (instanceClass: class): object {}

  return new instanceClass();

  }

  []] >

  < / fx:Script >

  "" < s:VGroup width = "100%" height ="100%" id = "Group">

  " < mx:ModuleLoader id ="testModule"url ="... /.. " /TestModule/bin-debug/test/module/TestModule.swf"" "" "

  height ="100" width ="100%"

  {applicationDomain ="{} }ApplicationDomain.currentDomain"/ > "

  " < s:Button label = 'click me!"click = "onButtonClick ()" / >

  < / s:VGroup >

  < / s:Application >

  ---------------------------------------
  Initially when the web application is started the an AdvancedDataGrid (coming from the ModuleLoader tag that loads TestModule, which contains TestComponent) appears correctly.
  When the button ' Click me ' is clicked - TestComponent another instance should be added in the VGroup.
  Instead the exception above appears.
  IF TestComponent contains mx:DataGrid or any other spark or component MX - everything works fine - the 2nd instance of TestComponent is added.
  This problem only occurs with AdvancedDataGrid.
  I activated - keep-all-type-selectors in TestWebApp, I have tried all combinations of RLS, merged outside of libraries, etc. - no chance.
  The problem with preview of flex 4.1 and 4.5 burrito.
  I know it's a very specific question... but...
  We are trying to create a modular application in our company... and we want to use AdvancedDataGrid (spark DataGrid is not ready yet) so... Please help
  Thanks in advance,
  Deyan

  Create a string with the fully qualified name of the class.

• How to use FaceTime with Siri

  I you would Siri have been able to dial phone numbers using FaceTime, so my question is, is it possible? And if so, how?

  Hey MichaelnAvallone,

  Thank you for reaching out to help through Apple Support communities. Looks like you are wanting to make calls FaceTime with Siri. If so, I'd be happy to explain how to make this happen. First, you'll want to press on and hold the Home button or say "Hey Siri" to activate Siri. Then, for example, you can simply say, "make an audio call FaceTime to MOM" and Siri will only start a FaceTime call audio. If you say 'FaceTime Mom' Siri will begin a FaceTime call with video of this contact.

  The link below shows the ways to learn how to use Siri.

  Use Siri on your iPhone, iPad or iPod touch

  Kind regards.

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• the site theme is problem with firefox, but not any problem of chrome with!

  the site theme is problem with firefox, but not any problem of chrome with!
  for ex: http://haftegy.ir
  How to fix?

  Wow sorry! IM update firefox to the latest version and my problem is solved.
  Thank you very much.

• I can not access to sites such as Youtube or truckcam.tv it seems that the problem may be with the most recent Adobe flash and firefox as browsers further

  Question
  I can't access to sites such as Youtube or truckcam.tv , seems, the problem may be with the last Adobe flash and firefox as other browsers work I reinstalled both, but without success, even on the two desktop using Vista and laptop on Windows 7

  See:

  • https://support.Mozilla.org/KB/Flash-113-crashes

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.