Problem of grouping - Siebel

Similar Questions

• Problem of Skype calls groups calls problem/video group

  Hello

  I use Skype on Samsung Galaxy A5 (A500FU) and I can not start a group call / or call groups like the button 'call' in the upper right corner is missing. Same problem with group video calls (call button is missing).

  I use the latest version of Skype for Android - 6.33.0.575

  Any ideas?
  
  Thanks in advance

  Skype has solved the problem in version 7.01.0.669 of 31.05.2016. After the update the Group calls (video & audio) work correctly.

  I must say that I am really impressed with their customer service. I explained the problem in detail and in the next update, the problem has been resolved. All people using Skype on Samsung Galaxy A5 will be very happy

  Thank you

• How to resize pin tabs / deal with problems of Group tab in Firefox 22?

  With the automatic update of Firefox 22, my pinned tabs have swelled in size; not only this horrible aspect, but it reduces the real estate available for the other tabs. While NoSquint has solved the problem with websites randomly resizing themselves, everything else (menu add-on, toolbar icons) has also increased in size, which affects what can be displayed.

  Another problem with 22, this is my tab groups are there is more normally: I click a group and another group moves around the screen, usually jump behind the original group I clicked on. Suggestions to improve these problems are very popular.

  Hello, firefox 22 is now about the density of pixels you have upgraded to system in Control Panel > appearance > display. more information on this topic is available at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller

  If you want to set the text size/pixel density in firefox is different that your system settings as it has been addressed in previous versions, enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named layout.css.devPixelsPerPx. Double-click it and change its value to 1.0 (or any zoom factor that fits your purpose; 0.8 is equal to 80%, 1.15 is 115% and so on...,-1.0 is the default and will comply with the configuration of the system).

• Gradient of 'problem' in groups

  Hello! We have a problem to apply the gradient effect to a group. It manages the entire group as a single object when it comes to gradient. All other effects is applied per / layer.

  Just to show here are the results:

  '

  This is what happens when adding the effect to a group:

  

  It works as it is designed to work. The layer in a group styles are still applied to the whole of the combined buffer and naturally a gradient will change his appearance because the bounding box is used to determine its spread.

  Mylenium

• HP ProLiant DL380e Gen8 instaled ESXi 5.5.0 Build 2068190 on the problems of GROUP internal 8GB SD card

  I have the new server, new instalation.

  Inside I have 2 EG0600FCSPL drive in RAID 1

  There are currently running VM 3. 2 R2 server 2012 and a VM of Windows 8.1.

  First of all, I got there are GROUP 14 days and it poped up during the instalation. I've updated firmwere diretly from the server.

  Now that the server is rdy to start runing (field's UP, computer in the area etc.) I got the GROUP yesterday again. After reading some forums, may be problem with HP in terms of energy savings. I set everything on high preformance. Night GROUP again, ares yesterda GROUP setting and this night.  All spoke of "no heartbeat".

  I also notice when I connect to the server in the morning, it takes like 30 sec to get connect. After the first connection takes like 5 seconds, much faster. What I'm noticing from the beginning until today. Which is perhaps related to something.

  No idea what can be wrong?

  TNX

  Mathjaz.

  About power management.

  Ive had never no success with activated power management.

  Power management means GROUP...

  In the bios, you must set to high performance power management, disable all States 'C' and the maximum cooling.

  We have suffered before CMTF due to power management and now ALWAYS disable it.

• Show and hide the problem of groups (topics) of Param

  My plugin brought fairly complex has quite a few settings, I've grouped using topics to keep things neat. The user can choose which limits to start or stop using a checkbox for each. Turn on a checkbox displays the settings group; turn off, cover the group settings. I use the following code in a function called from PF_Cmd_USER_CHANGED_PARAM and PF_Cmd_UPDATE_PARAMS_UI:

  AEGP_StreamRefH wfm_streamH = NULL;

  A_Boolean hide_wfmB =! params [QPGA_SCOPE_OPTION_WFM]->u. bd. value ;     The value hide_wfmB to the inverse of the value of the checkbox

  AEGP_EffectRefH                    meH                                                  = NULL;

  AEGP_SuiteHandler suites (in_data->pica_basicP);

  ERR (suites. PFInterfaceSuite1 ()->AEGP_GetNewEffectForEffect(NULL, ->effect_ref, & meH in_data));

  Example - waveform monitor only, but in the code for real there is one of these for each of the groups of five range

  ERR (suites. StreamSuite2 ()->AEGP_GetNewEffectStreamByIndex(NULL, meH, QPGA_WFM_TOPIC_START, & wfm_streamH));

  etc...

  Visibility Toggle of the parameters

  ERR (suites. DynamicStreamSuite2 ()->AEGP_SetDynamicStreamFlag(wfm_streamH, AEGP_DynStreamFlag_HIDDEN, FALSE, hide_wfmB));

  etc...

  if (meH) {

  Err2 (suites. EffectSuite2 ()->AEGP_DisposeEffect(meH));

  }

  if (wfm_streamH) {

  Err2 (suites. StreamSuite2 ()->AEGP_DisposeStream(wfm_streamH));

  }

  etc...

  It works fine when the check box is selected, but the problem is if I save my instance effect as a preset of effects. When I apply the preset to a new layer, I get for example, all parameters in the hidden groups appear less their group themes, when they should be hidden. These two images show what controls should look like, and what they look like:

  Expected result:

  

  Actual result if the application via an effect preset:

  

  Settings between the red lines are those of the four other groups that should not be displayed.

  I hope this makes sense. My hunch is that I have to disable sur-ou * every * parameter within a group. This will require a lot of flow Ref handles well and seems a little inelegant/inefficient!

  One thing I do not use sequence data - I tried this because he was part of the sample project (master of work, I think), but it did not affect the result. I thought that the sequences were a red herring here anyway.

  Thanks in advance!

  Christian

  Unfortunately, you can't hide/show each param within a group, or such bugs happen. (for example, which appears in the timeline panel is touch-ups)

  However, as the coding of the problems come, is not a problem. only a nuisance.

  (and you're right, the sequences have nothing to do with this problem)

• Problem with grouping and SUM

  .

  Hello

  Whenever you have a problem, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) for all the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.

  Looks like you have a fan trap , where exist one-to-many relationships between tables, so that you are adding contains multiple copies of the same row of a table. If this is what is happening, then perform the GROUP BY and the AMOUNT on the table before joining. Without seeing some examples of data and the results desired from this data, I can't be sure if this is the problem, or any more tell you in detail how to fix it.

• Problem of groups Adobe Illustrator CS5.

  I work under windows xp using Adobe Illustrator CS5, and the problem is that when I have a some objects in an illustration of the Group and save this picture as a file * .ai, then send it to a customer who uses the MAC, the groups are getting involved. The customer has even sent me a screen captures, and the groups are REALLY involved.

  Some items that I initially gathered are not in the same group any more, some objects of a certain group who somehow became part of another group.

  I build my images on a single layer with multiple sublayers.

  Can the building illustrations with every single group on a separate layer to fix this? Am I missing something? This is the first time I encounter this kind of problem. Help, please.

  I remember never to happen, but it sounds like corruption to me. But I don't know if it is on your end or your customers.

  I use a mac and am will open your file and send you screenshots so that you can compare, if I open it fine then the problem is probably with your customer?

  But they might not like this.

  You can also try to send a pdf or a .ps file they can open the file directly .ps AI without distillation it.

• Problem with the Siebel (SBL-DAT-00565) tool

  Hello
  
  I installed the Siebel tool in Windows XP successfully, but when trying to connect to mark me the following error:
  
  An internall error appeared in the Siebel application authentication subsystem. Please contact your system administrator for assistance. (SBL-DAT-00565)
  
  Any idea, what the problem?
  
  Please, help me.

  Hello

  What database you are trying to connect,
  Check your ODBC sources,

  concerning
  Goud

• Problem with Group By

  Hello
  
  source table:
  prod_id - region - months - the sales amount
  10 USA - Jan - 1000
  11 UK - Jan - 2000
  12 - USA - February - 3000
  
  and I have to load 2 different tables
  
  Table 1 target: the amount of the sale must be grouped by region
  Table 2 target: the amount of the sale must be grouped by months
  
  How to get there?
  The keyword in the expression builder group gives the error:
  
  Bad request: keyword not found
  
  SQL emitted:
  Select IN_SALES. SALES_AMT
  GROUP OF IN_SALES. SALE_MONTH
  of SRC_DEMO. IN_SALES IN_SALES where (1 = 2)
  
  
  Problem here:
  The group by clause must be placed after the from clause
  
  ODI adds the 'of' after the ' group of.
  That is why the statement is marked as invalid
  
  Any suggestions?
  
  Thanks in advance
  
  Published by: user9546555 on April 14, 2009 04:38

  Hello

  When you load the target 1 table, mapping should be like this

  Sum (SalesAmount)

  don't map prod_id and months

  loading taget table 2, mapping should be like this

  Sum (SalesAmount)

  don't map prod_id and region

  Barro

  Published by: Balaji.tk on April 14, 2009 06:09

• Problem: Creating groups on a set of points in 2D space based on their relative proximity

  Hello

  I'm new to LabVIEW and I tried to do this several times, but I can not just solve.

  Problem:

  I have a set of points in 2D space(x,y), and I want to calculate the average of the sets of points very close together.

  Example:

  Consider the 5 points, A (1,2); B (2.3); C (100,200); D (120,220); E (110,210); F (500,600)

  I'm trying to get the result one set of points

  P [(1 + 2) / 2, (2 + 3) / 2]

  Q [(100 + 120 + 110) / 3, (200 + 210 + 220) / 3]

  S [500, 600]

  Where the outputs are the means of the points taken in sets that consist of points "closely" to the rhythm of the participant (within limits).

  C., (A, B) are nearby; (C, D, E) are close, while E is separated from the rest, in a small limit (say 30).

  This caused a lot of problems for me recently and I have to solve. Included image.

  Any ideas/suggestions are welcome.

  Thanks in advance.

  
  

• NDG and problems of Group of users

  I have two sets of NDG

  1 Routers_Switches

  2 UPS_PDU (power supplies)

  I have two sets of user groups

  1. network administrators

  2 UPS personal support

  I want only network administrators to access the Routers_Switch group and UPS support personnel to access the NDG UPS_PDU. I have users of network Admin user group access to the set of instruments of UPS. Is it possible to have only the Admin network access only the ndg routers_switch and not the ndg UPS_PDU group?

  Simply select

  1. group configuration

  2. Select the Group of Routers_Switches

  3. ten scroll down to the "by a defined group of network access restrictions" activate with a check mark.

  4. Select reject call/point

  5 customer AAA = UPS

  6 ports = *.

  7. address = *.

  8. press enter and the new rule will be added to the window above.

  9. click on submit (not present and restart until you create the other NAR for the other group)

  Go back and select the UPS_PDU group and do the same steps but,.

  1. customer AAA = routers_switches

  2 port = *.

  3. address = *.

  4. enter

  Click on send and restart, but remember that this will stop the authentication of users at the same time it restarts.

  I hope this helps.

  Craig

  Pls rate useful messages.

• Problem with Group concat

  Hello
  
  I want my data to group concat:
  
  instead of having:
  
  Here's my output data:
  ID | Brand
  55. Xcel
  55. DCS
  
  I would like:
  
  ID | Brand
  55. XCEL, DCS
  
  but when I use the function concat wm_concat or a group that I have an error message. My Oracle version is:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi.
  
  Here's my query:
  

  select
    RES."ID",
    wm_concat((select NAME from BRAND where ID=RES.BRAND_ID)) as "BRAND"
    
  from
    HCQ_RESOURCE RES

  Do you have any idea how to group concat?
  
  Kind regards
  Jarod.

  Hello

  After the complete script that you ran, and the exact error message that you have.
  Always tell what version of Oracle you are using.

• Problem in OPM Siebel data model import

  I use OPM 10.2 and havaing a question to import the Siebel data model in to OPM. I also have 10.2 Siebel connector, installed on the desktop.
  
  In OPM, I don't see the Siebel-> Import Data Model option in the menu.
  
  Y at - it no configuration changes that need to occur in OPM for this?
  
  Edited by: SP1D3R MAN on 17/11/2011 18:02

  1. make sure you have the Siebel 10.2.1 Oracel software delivery Cloud connector (formerly E-Devliery), there was a bug with the earlier 10.2 where the policy modeling Plugin did not work.

  2. make sure that the files Oracle.Modeling.Siebel.Exchange.dll, Oracle.Modeling.Siebel.Plugin.dll , there is the subdirectory Plugins Policy Modeling (default location C:\Program Files\Oracle\Policy Modeling\plugins)

  3. make sure that you use Policy Modeling 10.2

  If you manually copy the dll, they can be found in the download connector for siebel in the program files\Oracle\Policy Modeling\plugins\

• problem of group cos of the requirement

  Hello all;
  
  I have the following SQL below
  

  create table t1 
  ( 
         id varchar2(200),
         t_qty number(30),
         v_qty number(30),
         c_date date
  );
  
  insert into t1
    (id, t_qty, v_qty, c_date)
  values
    ('A', 4, 20, sysdate);
  
  
  
  insert into t1
    (id, t_qty, v_qty, c_date)
  values
    ('A', 5, 15, sysdate);
    
  insert into t1
    (id, t_qty, v_qty, c_date)
  values
    ('A', 1, 6, to_date('18/04/2011','DD/MM/YYYY'));
  
  insert into t1
    (id, t_qty, v_qty, c_date)
  values
    ('A', 1, 7, to_date('18/04/2011','DD/MM/YYYY'));
  
  insert into t1
    (id, t_qty, v_qty, c_date)
  values
    ('A', 1, 1, to_date('11/04/2011','DD/MM/YYYY'));
  
  insert into t1
    (id, t_qty, v_qty, c_date)
  values
    ('A', 1, 1, to_date('11/04/2011','DD/MM/YYYY'));

  I want to do is essentially to determine the value of delta, which is v_qty - t_qty and if the value of delta for that particular day is a zero count status as success for this day so that in a given week, I'll know the total number of successes for this week. The total is a sum just to each delta value executed. For example, if you look at the week period on 18/04/2011-24/04/2011, according to the data of the sample
  We have the following information
  A 6 1
  A 7 1
  
  the delta is approximately (6 + 7) - (1 + 1) = 11, because the delta is not zero then it's a failure and therefore count as 1, and also as the summons within this week there is just 1, then total will be 1.
  
  
  It is the view I want below
  

  Week period                              Success       Failure     total
  2011/04/18 - 2011/04/24               0               1            1
  2011/04/25 - 2011/05/01               0               1            1
  2011/04/11 - 2011/04/17               1               0            1

  Any help is appreciated, thank you note examples of data. Thank you.
  
  Published by: user13328581 on April 28, 2011 12:23

  Try this,

  SELECT TO_CHAR(TRUNC ( c_date, 'IW'),'YYYY/MM/DD') || '-' ||
         TO_CHAR((TRUNC ( c_date, 'IW') + 6),'YYYY/MM/DD') st_date,
         SUM(DECODE (smv, 0, 1, 0)) success,
         SUM(DECODE (smv, 0, 0, 1)) failure,
         SUM(1) total
    FROM (SELECT ID,
                 TRUNC (c_date) c_date,
                 SUM (t_qty) - SUM (v_qty) smv
            FROM t1
          GROUP BY ID, TRUNC (c_date))
  GROUP BY TRUNC ( c_date, 'IW');
  
  OUTPUT
  ---------------
  ST_DATE                  SUCCESS    FAILURE      TOTAL
  --------------------- ---------- ---------- ----------
  2011/04/11-2011/04/17          1          0          1
  2011/04/18-2011/04/24          0          1          1
  2011/04/25-2011/05/01          0          1          1
  

  G.