Gradient of 'problem' in groups

Similar Questions

• Problem of Skype calls groups calls problem/video group

  Hello

  I use Skype on Samsung Galaxy A5 (A500FU) and I can not start a group call / or call groups like the button 'call' in the upper right corner is missing. Same problem with group video calls (call button is missing).

  I use the latest version of Skype for Android - 6.33.0.575

  Any ideas?
  
  Thanks in advance

  Skype has solved the problem in version 7.01.0.669 of 31.05.2016. After the update the Group calls (video & audio) work correctly.

  I must say that I am really impressed with their customer service. I explained the problem in detail and in the next update, the problem has been resolved. All people using Skype on Samsung Galaxy A5 will be very happy

  Thank you

• How to resize pin tabs / deal with problems of Group tab in Firefox 22?

  With the automatic update of Firefox 22, my pinned tabs have swelled in size; not only this horrible aspect, but it reduces the real estate available for the other tabs. While NoSquint has solved the problem with websites randomly resizing themselves, everything else (menu add-on, toolbar icons) has also increased in size, which affects what can be displayed.

  Another problem with 22, this is my tab groups are there is more normally: I click a group and another group moves around the screen, usually jump behind the original group I clicked on. Suggestions to improve these problems are very popular.

  Hello, firefox 22 is now about the density of pixels you have upgraded to system in Control Panel > appearance > display. more information on this topic is available at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller

  If you want to set the text size/pixel density in firefox is different that your system settings as it has been addressed in previous versions, enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named layout.css.devPixelsPerPx. Double-click it and change its value to 1.0 (or any zoom factor that fits your purpose; 0.8 is equal to 80%, 1.15 is 115% and so on...,-1.0 is the default and will comply with the configuration of the system).

• HP ProLiant DL380e Gen8 instaled ESXi 5.5.0 Build 2068190 on the problems of GROUP internal 8GB SD card

  I have the new server, new instalation.

  Inside I have 2 EG0600FCSPL drive in RAID 1

  There are currently running VM 3. 2 R2 server 2012 and a VM of Windows 8.1.

  First of all, I got there are GROUP 14 days and it poped up during the instalation. I've updated firmwere diretly from the server.

  Now that the server is rdy to start runing (field's UP, computer in the area etc.) I got the GROUP yesterday again. After reading some forums, may be problem with HP in terms of energy savings. I set everything on high preformance. Night GROUP again, ares yesterda GROUP setting and this night.  All spoke of "no heartbeat".

  I also notice when I connect to the server in the morning, it takes like 30 sec to get connect. After the first connection takes like 5 seconds, much faster. What I'm noticing from the beginning until today. Which is perhaps related to something.

  No idea what can be wrong?

  TNX

  Mathjaz.

  About power management.

  Ive had never no success with activated power management.

  Power management means GROUP...

  In the bios, you must set to high performance power management, disable all States 'C' and the maximum cooling.

  We have suffered before CMTF due to power management and now ALWAYS disable it.

• Show and hide the problem of groups (topics) of Param

  My plugin brought fairly complex has quite a few settings, I've grouped using topics to keep things neat. The user can choose which limits to start or stop using a checkbox for each. Turn on a checkbox displays the settings group; turn off, cover the group settings. I use the following code in a function called from PF_Cmd_USER_CHANGED_PARAM and PF_Cmd_UPDATE_PARAMS_UI:

  AEGP_StreamRefH wfm_streamH = NULL;

  A_Boolean hide_wfmB =! params [QPGA_SCOPE_OPTION_WFM]->u. bd. value ;     The value hide_wfmB to the inverse of the value of the checkbox

  AEGP_EffectRefH                    meH                                                  = NULL;

  AEGP_SuiteHandler suites (in_data->pica_basicP);

  ERR (suites. PFInterfaceSuite1 ()->AEGP_GetNewEffectForEffect(NULL, ->effect_ref, & meH in_data));

  Example - waveform monitor only, but in the code for real there is one of these for each of the groups of five range

  ERR (suites. StreamSuite2 ()->AEGP_GetNewEffectStreamByIndex(NULL, meH, QPGA_WFM_TOPIC_START, & wfm_streamH));

  etc...

  Visibility Toggle of the parameters

  ERR (suites. DynamicStreamSuite2 ()->AEGP_SetDynamicStreamFlag(wfm_streamH, AEGP_DynStreamFlag_HIDDEN, FALSE, hide_wfmB));

  etc...

  if (meH) {

  Err2 (suites. EffectSuite2 ()->AEGP_DisposeEffect(meH));

  }

  if (wfm_streamH) {

  Err2 (suites. StreamSuite2 ()->AEGP_DisposeStream(wfm_streamH));

  }

  etc...

  It works fine when the check box is selected, but the problem is if I save my instance effect as a preset of effects. When I apply the preset to a new layer, I get for example, all parameters in the hidden groups appear less their group themes, when they should be hidden. These two images show what controls should look like, and what they look like:

  Expected result:

  

  Actual result if the application via an effect preset:

  

  Settings between the red lines are those of the four other groups that should not be displayed.

  I hope this makes sense. My hunch is that I have to disable sur-ou * every * parameter within a group. This will require a lot of flow Ref handles well and seems a little inelegant/inefficient!

  One thing I do not use sequence data - I tried this because he was part of the sample project (master of work, I think), but it did not affect the result. I thought that the sequences were a red herring here anyway.

  Thanks in advance!

  Christian

  Unfortunately, you can't hide/show each param within a group, or such bugs happen. (for example, which appears in the timeline panel is touch-ups)

  However, as the coding of the problems come, is not a problem. only a nuisance.

  (and you're right, the sequences have nothing to do with this problem)

• Problem with grouping and SUM

  .

  Hello

  Whenever you have a problem, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) for all the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.

  Looks like you have a fan trap , where exist one-to-many relationships between tables, so that you are adding contains multiple copies of the same row of a table. If this is what is happening, then perform the GROUP BY and the AMOUNT on the table before joining. Without seeing some examples of data and the results desired from this data, I can't be sure if this is the problem, or any more tell you in detail how to fix it.

• Problem of groups Adobe Illustrator CS5.

  I work under windows xp using Adobe Illustrator CS5, and the problem is that when I have a some objects in an illustration of the Group and save this picture as a file * .ai, then send it to a customer who uses the MAC, the groups are getting involved. The customer has even sent me a screen captures, and the groups are REALLY involved.

  Some items that I initially gathered are not in the same group any more, some objects of a certain group who somehow became part of another group.

  I build my images on a single layer with multiple sublayers.

  Can the building illustrations with every single group on a separate layer to fix this? Am I missing something? This is the first time I encounter this kind of problem. Help, please.

  I remember never to happen, but it sounds like corruption to me. But I don't know if it is on your end or your customers.

  I use a mac and am will open your file and send you screenshots so that you can compare, if I open it fine then the problem is probably with your customer?

  But they might not like this.

  You can also try to send a pdf or a .ps file they can open the file directly .ps AI without distillation it.

• Gradient mesh problem

  I'm doing the gradient line up on the curve, if I get a linear gradient even along it. I have created the mesh, adjusted the anchor points, so that they match the shape, I tried to recreate. Then I adjusted the handles of bexier (the "horizontal", not those of the cross-sections/columns) so that the shape is almost perfectly aligned with the original shape. Then, I chose a color for each anchor point, black for the those high and white for down those. Since I want the cuts straight or linear, I did drag the Bezier handles in cuts to their respective anchor points.

  The result is the following: http://imgur.com/eDE5V

  The gradient is linear to the places, mainly between the sections. But if you look at the low anchor points, you can see that the slope is very linear. In fact, the gradient is as a white sphere around each low anchor point. In addition, the area around the anchor, third from the left and the fifth from the right, is gray rather than black for some reason any. I put all the anchor points in their planned colours - black or white.

  Any ideas?

  Thanks in advance!

  You're a little too complicate it. You don't need so many MeshPatches and so tedious twidling for this object.

  The door to a collaboration with MeshGrads (especially when first familiarize yourself with them) is: keep it simple.

  'Simple' is a balance. One thing is 'Simple' in terms of use . 'Simple' in real terms construct that results is another. The two often come into conflict.

  Says otherwise; TIHE attempt to provide it too much thinking is 'intuitive' use (click on instant-gratification & drag 'ease') often prevents intuitive knowledge of what is happening and gives ugly results.

  Understand: The meshes are rectangular arrays of patches. This is why the MeshGrad dialog box asking you to specify rows and columns. Just like in a spreadsheet, each line has the same number of columns. When you draw a shape, then convert to a MeshGrad, you often lose sight of this and end up confused, because the visual appearance of the columns and lines generated automatically does not match your knowledge of the shape.

  The same problem occurs when users think auto tracing is a sort of automagic 'conversion '. He have to remember about all these features: the program is not didly your intention and understanding of the form.

  Each Patch has four corners. When you leave the program automatically create your mesh, you must try to reconcile your form to what is equivalent to an arrangement of lines and columns. The MeshPoints (corner of MeshPatches) which generate the grad do not necessarily match your anchorPoints of path that define the form. You just think they often do, because the MeshPatches are deformed by an envelope that is trying to match the shape of your path.

  So when possible (that it is definitely in your example), start with a mesh object and set then its shape, instead of starting with a shape and trying to force - fit his grad:

  

  See how much simpler (elegant) is in terms of construction? Note that the patch on the left has still four corners. Just looks like he has three.

  Note, however, the ugly triangular facets of the grads. I can't do anything about those. And this brings me to my second main point: why do you feel compelled to create this specific object with a MeshGrad anyway? Just because the MeshGrads are all the buzz, because they are relatively new, it follows necessarily that they are a panacea for everything.

  Maybe you're just experimenting to the knowledge of the MeshGrads. If so, it's a good thing. But if this for real actual work, for the specific kind of thing represent you, I got buld probably an Artbrush and end up with something much easier to use, much more versatile, and that more reliable returns from the level "to across-the-form" you want:

  

  Once the brush is built, using it is a simple matter to draw a path only thorn of any shape, instead of having to draw the contours. On any path to which you apply the brush, color and thinckness is controlled as if it were suddenly ordinary; Simply to apply a different color or weight to Stroke the object.

  IE7

• Problem of grouping - Siebel

  Hi all
  
  Am facing a problem in one of the reports. Here's the scenario.
  
  I need my report of Contact list on the "Country" field that is not a direct field in the Contacts in the group. This comes from another business component in Siebel, which is "home address".
  
  It does not work. But when I try to group the report based on a field that is a direct field Contacts, it works very well. (Ex: person)
  
  Am not able to do this. Kindly help me with this.
  
  
  Thanks in advance,
  Imtiaz.

  Since the details of your country are under contacts, use the correct path for the grouping.

• Problem with Group By

  Hello
  
  source table:
  prod_id - region - months - the sales amount
  10 USA - Jan - 1000
  11 UK - Jan - 2000
  12 - USA - February - 3000
  
  and I have to load 2 different tables
  
  Table 1 target: the amount of the sale must be grouped by region
  Table 2 target: the amount of the sale must be grouped by months
  
  How to get there?
  The keyword in the expression builder group gives the error:
  
  Bad request: keyword not found
  
  SQL emitted:
  Select IN_SALES. SALES_AMT
  GROUP OF IN_SALES. SALE_MONTH
  of SRC_DEMO. IN_SALES IN_SALES where (1 = 2)
  
  
  Problem here:
  The group by clause must be placed after the from clause
  
  ODI adds the 'of' after the ' group of.
  That is why the statement is marked as invalid
  
  Any suggestions?
  
  Thanks in advance
  
  Published by: user9546555 on April 14, 2009 04:38

  Hello

  When you load the target 1 table, mapping should be like this

  Sum (SalesAmount)

  don't map prod_id and months

  loading taget table 2, mapping should be like this

  Sum (SalesAmount)

  don't map prod_id and region

  Barro

  Published by: Balaji.tk on April 14, 2009 06:09

• Problem: Creating groups on a set of points in 2D space based on their relative proximity

  Hello

  I'm new to LabVIEW and I tried to do this several times, but I can not just solve.

  Problem:

  I have a set of points in 2D space(x,y), and I want to calculate the average of the sets of points very close together.

  Example:

  Consider the 5 points, A (1,2); B (2.3); C (100,200); D (120,220); E (110,210); F (500,600)

  I'm trying to get the result one set of points

  P [(1 + 2) / 2, (2 + 3) / 2]

  Q [(100 + 120 + 110) / 3, (200 + 210 + 220) / 3]

  S [500, 600]

  Where the outputs are the means of the points taken in sets that consist of points "closely" to the rhythm of the participant (within limits).

  C., (A, B) are nearby; (C, D, E) are close, while E is separated from the rest, in a small limit (say 30).

  This caused a lot of problems for me recently and I have to solve. Included image.

  Any ideas/suggestions are welcome.

  Thanks in advance.

  
  

• NDG and problems of Group of users

  I have two sets of NDG

  1 Routers_Switches

  2 UPS_PDU (power supplies)

  I have two sets of user groups

  1. network administrators

  2 UPS personal support

  I want only network administrators to access the Routers_Switch group and UPS support personnel to access the NDG UPS_PDU. I have users of network Admin user group access to the set of instruments of UPS. Is it possible to have only the Admin network access only the ndg routers_switch and not the ndg UPS_PDU group?

  Simply select

  1. group configuration

  2. Select the Group of Routers_Switches

  3. ten scroll down to the "by a defined group of network access restrictions" activate with a check mark.

  4. Select reject call/point

  5 customer AAA = UPS

  6 ports = *.

  7. address = *.

  8. press enter and the new rule will be added to the window above.

  9. click on submit (not present and restart until you create the other NAR for the other group)

  Go back and select the UPS_PDU group and do the same steps but,.

  1. customer AAA = routers_switches

  2 port = *.

  3. address = *.

  4. enter

  Click on send and restart, but remember that this will stop the authentication of users at the same time it restarts.

  I hope this helps.

  Craig

  Pls rate useful messages.

• Melted transitional gradient button problem?

  Hello

  When I use the color of gradient for melted transition is not a work, it only works with solid colors :/

  and I hope that you add the transition of transformation in the next versions of Muse

  Wow, that is a bad thing indeed! The Transitions option should either stay unavailable (grayed out) or settings should work. But it's really not nice. Bug alert! With gradients is crucial to the smooth design of buttons...

• Gradient ellipse problem

  Hello!

  I followed this tutorial-> https://www.youtube.com/watch?v=ldsTXjQ3rn0

  but with my illustrator

  and when I got to the step minute 10:27 I block.

  Because he built an ellipse with the Red gradient, but I can't make the gradient!

  I followed all the steps, but my gradient is red/white!  It's not the slope of the video tutorial!

  Help me!

  Thank you all!

  It's my gradient:

  

  It is in RGB mode, you are in CMYK mode

• Problem with Group concat

  Hello
  
  I want my data to group concat:
  
  instead of having:
  
  Here's my output data:
  ID | Brand
  55. Xcel
  55. DCS
  
  I would like:
  
  ID | Brand
  55. XCEL, DCS
  
  but when I use the function concat wm_concat or a group that I have an error message. My Oracle version is:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi.
  
  Here's my query:
  

  select
    RES."ID",
    wm_concat((select NAME from BRAND where ID=RES.BRAND_ID)) as "BRAND"
    
  from
    HCQ_RESOURCE RES

  Do you have any idea how to group concat?
  
  Kind regards
  Jarod.

  Hello

  After the complete script that you ran, and the exact error message that you have.
  Always tell what version of Oracle you are using.