Problem of installing a drive of 3 TB in a 700 wanted

Similar Questions

• Problems when installing a driver for my scanner

  Hello!

  I have serious problems when you try to install a driver for my scanner - Epson Perfection V700 - on my desk. It was installed earlier, but after a reinstall of XP Pro (SP3), it seems impossible to install it again. Whenever I get an errormessage: "not able to copy the files. Make sure that the target disk is not dead. »

  I tried to install the driver when I had turned off almost all the programs, in "auto-start" - same problem. I run a scan of the disc and also done a defrag - same problem. I have installed many programs on my desktop, so until after I encountered the problem with the driver for the scanner and it was no problem to install the driver on my laptop (also XP Pro).

  I ' v chatted with the support of Epson in England and they have suggested that the problem was in my PC. Because I'm taking care of family archives, I am more eager to get the scanner working again. Any advice/suggestions how to deal with the situation are so much appreciated.

  Hello

  Good to know that your problem is resolved and thanks for letting know us.

  ·        If the scanner works fine then, why do you want to update the driver?

  You may need to consult the manufacturer of the scanner (Epson) to check if they have released an update of the driver for your scanner. To update the drivers on which are present on the system, follow the steps mentioned in the article below.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problem to install the driver for the AMDA00 interface

  I have problem to install the driver for the interface of AMDA00 under the system of the device. I am using ASUS motherboard H87 - more.

  When I update the driver it is a prompt window found driver software, but has encountered an error trying to install it, 'access denied '.

  Get the drivers on the site of Asus, specific support to your me board

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• having problems to install a driver

  Hi I have a windows netbook eepc 7, I have problems to install a driver can help you please? XX

  Your only other option is to go to a computer to work with a Player DVD copy the contents of the disc to a folder and copy this folder on a USB and install from it on the target computer.

• Envy of HP dv7-7332ea: having problems to install the driver of HP wireless button

  Hi all

  I would really appreciate some help here. Recently, I did a factory rest on my laptop dv7 HP Envy but can't reinstall Windows 10.

  Before doing this, I was told that I need updates of Windows 8 to 8.1, and then to Windows 10.

  However, I am unable to Al of Windows 8 to 8.1 Windows I'm not all the drivers installed.

  For some reason, I am unable to install the driver of HP wireless button. Whenever I try to download through Windows Update in Control Panel, it downloads and after installation displays an error code 80070436.

  I am unable to get this driver installed and therefore cannot be updated to Windows 8.1. I tried to update to 8.1 without the driver, but my laptop is restarted it got stuck at 82%.

  I would be grateful if someone could give me some advice or help get this sort I seem to keep hitting a brick wall.

  Thank you very much

  Ian :-)

  You are the very welcome.

  You will be able to install W10 directly without the need to spend any other OS.

  I did it several times already, so I know it works.

  Twice on nine discs in a solid state on laptops that had previously been W10 on the old mechanical hard disks.

• problem when installing bluetooth driver and software for windows 8

  I have a Samsung np355v5c-s05IN Laptop.I have windows 8 on my laptop pre-installed. Recently I reset my laptop then the Bluetooth driver and graphics software have been uninstalled. I got the software from Samsung which has helped me to install all the drivers and software is but he could not install the following Bluetooth and the driver. I have the software and the driver I tried to install manually but it was not original. I am enclosing pictures of errors. Please provide the solution for the same thing. I have a built-in Bluetooth of qualcomm atheros ar3012

  
  

  I found the solution. I uninstalled the unknown device in Device Manager. Then I deleted the bthport using cmd (Administrator). Then using the device manager that I scanned Bluetooth for windows and hardware changes automatically detected and installed the driver itself. But I want to know what was the main issue.

• Problems to install the driver for printer HP Photosmart C4580 point Windows 8.1

  I bought a new laptop (Asus i7 with Win 8.1) and I'am trying to install the current driver for my HP Photosmart C4580 printer. I downloaded the driver full HP website: size 233 Kb, but when I try to install it I get the same message: ' Impossibile find it file specificato: c:\Users\Appdata\Local\Temp\7zs08EC\Setup\hpzpnp.ic...» »

  Please help me. TXS a lot.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• problem of installing a drive mSata

  Hello

  just recently bought a X220tablet and very happy with it. Did not work much on it because I was planning to install a player mSata with windows 8 on it and then really start using it.

  So, I bought a disc crucial msata and made the instalation of psycical in the cell, which went well. It was not difficult.

  But now the software. What I've done so far:

  -makes a backup of the HARD drive (with windows 7 on it) and make it bootable on USB HDD

  -removed HARD drive

  -start the laptop and started the rescue and recovery program.

  -tried to restore the system, but this one went with difficulties: the show told me that the backup has been big for the size of the SSD. She had an abortion.

  -Now, when I try to start the laptop, I get the windows Boot Manager screen. He told me to get windows 7 cd, and performing.

  This is how it is now. Put the HARD return drive, does not. I think that the SSDS was simply not installed right and now gives this problem.

  I wonder what to do now. Note that I don't have an external DVD drive.

  Should I buy one? Buy windows 8 cd, run that and everything will be fine? Or are there other ways to solve my problem?

  thnx in advance for any toughts.

  Hi timpel,.

  While I don't know if it's directly (or even indirectly) cause you have to go, there are a number of reports that the latest firmware in the m4 mSATA can cause the drive not to be recognized by the BIOS, including several users with ThinkPads.

  http://forums.crucial.com/T5/solid-state-drives-SSD/crucial-M4-MSata-01MG-firmware-issues/m-p/110572...

  I recently bought a Crucial m4 mSATA and tried to install Windows 8 for her on my x220T. He was initially successful, recognized and installed, and stopped then recognized by the BIOS, with the warning "2101: Drive error detection on hdd2 (SATA mini).

  You can check the firmware of your player by clicking Start > computer > right-click on the SSD drive, choose Properties > Hardware tab > in the list of all disk drives, select your SSD and click Properties > Details tab > in the title drop-down list, select the material ID. If you see ' 01 MG "to the right of the entry for your mSATA, you are on the latest firmware where problems may arise.

  There were no announcements of new packages of Crucial yet... If you are within RMA for your mSATA, you might want to consider this option.

• Problem after installing the driver VGA for HP Pavilion 1212TX g4

  Hello. I just bought a new HP Pavilion 1212TX g4.

  I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

  The error occurring on the screen is something like this: Access Violation (0xc0000005).

  Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

  I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

  Please someone help me. I can't use my new laptop

  Thanks in advance

  Herry

  If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• Problem in installing modem driver XP on Satellite M115-S3094

  Hello

  I installed a clean XP Pro on my laptop and then tried to install drivers that are available from the Toshiba site.
  Everything worked except the Modem and its reader. They have both a PCI DEVICE with exclamation on the other devices in the Device Manager section.

  I tried to download several drivers but none worked so far.

  Thanks in advance.

  EDIT:

  I don't have access to my restore disk because I moved here for work for one month.

  Hello

  It is a Toshiba laptop model we! Did you use the drivers from the Toshiba driver page we?
  Please do and more, you must ensure that your Windows XP contains SP2 and the latest MS patches before installation of the modem and its pilot!

  Good bye

• Problem to install the driver NVIDIA on E5 - 571G

  I recently bought an Acer E5 - 571G. It was sold as being without an operating system-, but it was Linux. I finally managed to install windows 7 Home Premium 64-bit. I've updated drivers, including Intel Hd graphics.

  I can't install the nvidia driver for the graphics card of 840 M. Drivers on the resource DVD or on the acer website do not work. I tried different versions, including windows drivers 8.

  I get a compatibility error message:

  NVIDIA Setup cannot continue
  The NVIDIA graphics driver is not compatible with this version of windows.
  This graphics driver could not find compatible graphics hardware.

  Can anyone help?

  Thank you

  Steve

  Can you please help? Thank you.
  Steve

  Have you tried on the nvidia site?
  http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?URL=/Windows/337.88/337.88-n...

• [SOLVED] Problem - cannot install Windows XP on C dive - only option is the D drive.

  Hello

  I'm doing a clean install of windows xp pro on a hard disk with unallocated space at the front of the drive and a primary partition containing the data at the end of the training.

  I want to install windows xp pro on a primary partition on the front of the disk on drive C.

  Here's my problem:

  When I was installing windows xp pro, I noticed that when I created a partition in the unallocated space at the front of the car where I wanted to install windows xp pro, that I couldn't C as a drive letter for the installation drive - d only.

  I ran the installation at the end and Yes, windows xp pro did install on drive D - this isn't what I want - I want it on the C drive.

  Can someone tell me how I can solve this installation problem.

  Should I run a partition boot CD and set up a primary partition on the front of the drive before installing windows xp pro?

  Thank you very much.

  I solved this problem by following these steps:

  1. I installed a second hard drive (old sata drive).

  2. I installed windows xp on the second hard drive.

  3. I photographed the windows xp install from the second disc on the first hard drive.

  4. I deleted the second disc.

  5. I've rehearsed with my other computers.

  Everything works fine - just takes a little longer than expected.

• Cannot install the driver for the wifi adapter

  Hi, I have a problem with installing adapter driver WiFi on hp pavilion dv6-3225dx, any driver that I use, I get an error that the driver was not installed correctly.  The wifi on the keyboard light does not turn off, light is a steady orange.  Help, please

  I decided to open the new laptop just to be sure and low and here is the wlan was a bit out of place, I set in and now its recognized, I'm going to have a drink now, thanks for your help