Problem of interface design

Hello

I want to check the box for one of the column key target in my interface.

But in the Targte column properties it shows now as people with reduced mobility. It does not activate or check for a particular column.

What I have to do.

This is because you have a key to update selected on your table.

Click on the name of the target, you'll see a listbox with your updated key. If you need to change (or you want another) will add to your model-> datastore click more, constraint, constraint, secondary key and fill it. Save, close interface, reopen and, after clicking on the name, select your new of the United Kingdom.

Second option (deprecated in my opinion) is to deselect your key to updating in the drop-down list and a flag of any field you need.

Tags: Business Intelligence

Similar Questions

  • VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

    I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

    This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

    Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

    There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

    Please help me ASAP!

    Thank you

    Ivan

    I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

    It's important to create the system DSN if you want your VI of web service to communicate with the database.

    PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

  • Confused about the bar mentioned in user interface designs

    I was reviewing the instructions for user interface design, and he mentions a menu bar:

    "Use a menu bar to move user interface components off the screen.
    The application menu can include primary or secondary
    The menu when you drag from the top of the screen.

    The menu bar is built in? Or it simply means, I can create an and show it when the 'swipe_start' event fires?

    What does primary and secondary? This means main and submenus?

    If there is a menu built in, how I add to it? If I created one, what would be the best approach to design? I saw a QNX class for menus. How the menu disappear? Would it not as simple as when something is clicked?

    If the best way to get the menu bar to slide downwards to activate it? It is implying that the menu bar is the Menu bar main application and dialog boxes in the frame actions app to be managed by popups, buttons etc and do not use a menu bar always visible because it uses valuable screen realestate.

    I understand that these are guidelines, there are always exceptions to the rule. I just want an idea on best practices.

    Keith

    Hey kmitchell,.

    You basically answered most of your questions, but not confirm them

    The menu bar from what I've seen so far in the docs is not built in, and you will need to create one on your own by using the SWIPE_START event. Primary and secondary actually seems to be what you call main and submenus. What I thought of him, it was maybe a menu that looks the same every time by sweeping u down and has basic functions or if something happens in the application and slide you down the menu reflects the events of what is happening. in regards to how it should look like, there is a video of a demo that was presented at the adobe max Conference where he shows a demo of the camera app to help slip it in the menu dropdown. Here is the link. go to the last 13:45 video to see the demo:

    http://2010.Max.Adobe.com/online/2010/MAX260_1288217641375UQJD

    the menu design would be that it would disappear as soon as you click an option. its really what you want it to be. I don't think that there is no specificity.

    and Internet broadcasting its been said that they do not like to see sort of a title from the menu bar. now, I agree and disagree with this statement, but maybe im just not used to slide down menu type event. so ill see where this goes.

    also, here is a code harrydodgson and I worked on regarding the menu and the SWIPE_START event:

    SwipeDownTest.as (main Application file)

    package
{
    import caurina.transitions.Tweener;

    import flash.display.Sprite;
    import flash.display.StageAlign;
    import flash.display.StageScaleMode;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import flash.ui.Mouse;

    import qnx.events.QNXApplicationEvent;
    import qnx.system.QNXApplication;

    // The following metadata specifies the size and properties of the canvas that
    // this application should occupy on the BlackBerry PlayBook screen.
    [SWF(width="1024", height="600", backgroundColor="#F4F4F4", frameRate="30")]
    public class SwipeDownTest extends Sprite
    {
        private var ui:UI;
        private var swiping:Boolean;

        public function SwipeDownTest()
        {
            stage.align = StageAlign.TOP_LEFT;
            stage.scaleMode = StageScaleMode.NO_SCALE;

            ui = new UI();

            addChild(ui);

            QNXApplication.qnxApplication.addEventListener(QNXApplicationEvent.SWIPE_START, onSwipeStart);
        }

        private function onSwipeStart( e:QNXApplicationEvent ):void
        {
            swiping = true;
            addEventListener( Event.ENTER_FRAME, trackMouse );
            stage.addEventListener( MouseEvent.MOUSE_UP, mouseUp );
        }

        private function trackMouse( e:Event ):void
        {
            var pos:int = stage.mouseY;

            if (pos > 123) pos = 123;
            if (pos < 0) pos = 0;

            ui.y = pos;
        }

        private function mouseUp( e:MouseEvent ):void
        {
            if (!swiping)
            {
                Tweener.addTween(ui, {y: 0, time: .3, transition: "linear"});
            }

            removeEventListener( Event.ENTER_FRAME, trackMouse );
 
            swiping = !swiping;
        }
    }
}

    UI.as (File menu)

    package
{
    import flash.display.Shape;
    import flash.display.Sprite;

    public class UI extends Sprite
    {
        private var sectionOne:Shape;
        private var sectionTwo:Shape;

        public function UI()
        {
            //set it up with two sections

            sectionOne = new Shape();
            sectionOne.graphics.beginFill(0x333333, 1);
            sectionOne.graphics.drawRect(0,-123,1024,123);
            sectionOne.graphics.endFill();

            sectionTwo = new Shape();
            sectionTwo.graphics.beginFill(0x666666, 1);
            sectionTwo.graphics.drawRect(0,0,1024,600);
            sectionTwo.graphics.endFill();

            addChild(sectionOne);
            addChild(sectionTwo);

        }
    }
}

    hope that answered most of your questions. Good luck!

  • A problem with the design of the

    Hi all

    Im a beginner with Adobe musejuste a few days ago, but actually I have my own experience with the design of Web sites!

    Today, I am facing a big problem with a Web site under creation!

    When I finished the first home page, home page, I saw that I missed something, wish is receptivity. in fact, I have not now what to do, there are a lot of rectangles and shapes and paragraphs!

    There is this white areas when I pull the horizontal bar on the left, even if I apply my rectangles stretching mode and mode fluid forms!

    and here's an example!

    When full screen mode:

    1.png

    reagent:

    4.png

    and this comes, even the green bar is under the stretch the width of the browser!

    3.png

    I have more problems with delicate design, such as duplication of paragraphs and the inability to convert the navigation bar, like a menu of stationary box etc...

    Please if you can help me, because this is sort of a first job for me!

    I'll wait for your help please!

    Thanks in advance,

    Success,

    Rabi.

    ArnoDHeros wrote:

    Well, thank you very much for your answer!

    I don't know, I ask just 3 days for the homepage, I don't think that I could delete it and stard frm zero!

    but tell me, if I skip this part, empty spaces, it will be a problem for phone users, when I converted to phone available?

    not a phone copy only the page names... you would be rebuild your site for phone (whichassumes that you're going to this option) in responive layout, the rules change

    ArnoDHeros wrote:

    on the navigation bar, how can I convert it responsve box like this:

    Reactive demonstration of Navigation or menu full screen! Note that the navigation is created by a button widget!

    This demonstration of navigation is made to the office and will not work on many phones, my nokia 520 running 8.1 does not open a part of this page in ie, but I use a mini web browser application that can open most of the page without it hambuger image

    When you design for the web don't just test your site on office or you will make common mistakes that other office users do... phones are different devices and they do not behave like a chewed down desktop screen.

  • INTERFACE design - what is the best way to allow the user to define a kind of infusion at various times (non-periodic)?

    I want to allow the user to specify a curve like this:

    Such as some under - VI shows the A2 value when a variable of time is between R1, A1 when the time variable is between A2 and A3 when time is in the range A3.

    My design looks like this:

    With the error checking that looks like this:

    My question is, is the approach of the table according to optimal? Otherwise, how could combat this?

    I think I can summarize the conversation on this point as a response to the original question (what is the best way...) -to start writing code, to think about what you want to accomplish and write it down (otherwise known as 'Write the first Documentation').  One of the points of a good User Interface is that it is not allow users to "stupid mistakes" - it leads the user "by hand", limiting the entries to the "legal values" and demanding that the entries be made logically.

    If you were going to have a list of Infusions to enter, it is therefore logical to decide or not to enter into time intervals (which are always > 0) or order the times (which, logically) are still growing.  You can (and should) decide that you (or you may have a control that allows the user decide, but maybe it's too flexible) and then apply your "rules".

    Let's say you've decided on "Intervals" (which seems to me to be more User Friendly).  After the user has entered the intervals (and you've provided a nice plot of perfusion vs. time), pouvez allow you the user to an interval of 'split', 'Delete' an interval, or "Edit the Infusion" interval, or you can decide to have a choice more simple "accept or start again" - If you have only a few intervals, the last would be the simplest (and therefore best) design choice.

    Spend more time thinking before coding usually pays Big dividends!

    (Speaking of sad experience) Bob Schor

  • BlackBerry user interface design tool

    Hi all

    What kind of tool is recommended in the design of the interface of BlackBerry user?
    I would like to express and the resource PNG and the class as a screen or a Manager or a field on the layout of the screen.

    There are tutorials... Here are a few links.

    http://devsushi.com/2007/12/02/BlackBerry-JDE-API-user-interface-field-reference/

    http://www.Scribd.com/doc/4759794/developing-custom-Java-applications-BlackBerry

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/CustomView.html?func=...

    Good luck.

    D

  • VPN Tunnel problem. external interface has private IP

    Hi all

    I don't know if it is wired or not!

    When our ISP provide us an Internet connection our real IP is configured on the ethernet interface, while the serial interfaces have a private IP address.

    The problem here is when I'm trying to configure a VPN tunnel to another router.

    Anything in the configuration is smooth, except for the part where I put the serial interface is my outside.

    The tunnel is still low coz the IP address will be my private (serial interface) during the configuration on the router counterpart is my public IP address.

    So I am woundering is there a way I can force the VPN tunnel to take the IP address configured on the side LAN? Or any other work around?

    Building configuration...

    Current configuration: 2372 bytes

    !

    version 12.4

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    no password encryption service

    !

    boot-start-marker

    start the flash c1841-advsecurityk9 - mz.124 - 23.bin system

    boot-end-marker

    !

    property intellectual auth-proxy max-nodata-& 3

    property intellectual admission max-nodata-& 3

    !

    crypto ISAKMP policy 1

    BA 3des

    preshared authentication

    Group 2

    !

    crypto ISAKMP policy 2

    BA 3des

    md5 hash

    preshared authentication

    Group 2

    isakmp encryption key * address 144.254.x.y

    !

    !

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    !

    map SDM_CMAP_1 1 ipsec-isakmp crypto

    Description Tunnel to144.254.x.y

    the value of 144.254.x.y peer

    game of transformation-ESP-3DES-SHA

    match address VPN_Traffic

    !

    !

    !

    interface FastEthernet0/0

    address IP 10.55.218.1 255.255.255.0 secondary (My internal subnet)

    IP address 196.219.a.b 255.255.255.224 (my public IP)

    IP nat inside

    IP virtual-reassembly

    automatic duplex

    automatic speed

    No keepalive

    !

    interface FastEthernet0/1

    no ip address

    automatic duplex

    automatic speed

    !

    interface Serial0/0/0

    no ip address

    frame relay IETF encapsulation

    frame-relay lmi-type q933a

    !

    point-to-point interface Serial0/0/0.16

    IP 172.16.133.2 255.255.255.252

    NAT outside IP

    IP virtual-reassembly

    SNMP trap-the link status

    dlci 16 frame relay interface

    map SDM_CMAP_1 crypto

    !

    interface Serial0/0/1

    no ip address

    frame relay IETF encapsulation

    ignore the dcd

    frame-relay lmi-type q933a

    !

    point-to-point interface Serial0/0/1.16

    IP 172.16.134.2 255.255.255.252

    NAT outside IP

    IP virtual-reassembly

    SNMP trap-the link status

    dlci 16 frame relay interface

    map SDM_CMAP_1 crypto

    !

    IP forward-Protocol ND

    IP route 0.0.0.0 0.0.0.0 Serial0/0/1.16

    IP route 0.0.0.0 0.0.0.0 Serial0/0/0.16

    !

    VPN_Traffic extended IP access list

    Note Protect traffic Local to any Destination subnet

    Remark SDM_ACL = 4 category

    IP 10.55.218.0 allow 0.0.0.255 any

    !

    Scheduler allocate 20000 1000

    end

    This should do the trick.

    map SDM_CMAP_1 crypto local-address FastEthernet0/0

    See you soon

  • Problem of layout design to publish-overview

    Hi everyone, I'm using muse adobe for a week.

    I use both the trial and the full version on the offices of my co-worker.

    The software is really good and offers a powerful set of tools, but I have a big problem...

    Whenever I try to compile a page I have problems wih the provision that is different from the design to the preview.

    I will post some pictures to make you better understand

    Design view

    http://I58.Tinypic.com/2ni71a0.jpg

    Overview

    http://I60.Tinypic.com/dvj906.jpg

    The header image seems to have 100% width, due to which it was expanded to cover the width of the browser.

    However, the other elements are still in position and not expanding.

  • Any solution for the problem of license Design suite CS5?

    I installed the Design suite CS5. When I run the app, PSD, ID and AI do not work. error message: problem 213:5 of license. I entered the right app #. You have a solution to this issue?

    Thank you for your help. jfmb

    Error: "License has stopped working". Windows

  • Problems with the Designer of paragraph in 2015 FM

    I tried to put in place new paragraph styles using the paragraph Designer. I have all my input parameters and click APPLY. When the dialog box appears, I said to add the new style to the catalog and apply it to the document. All well with t he world. However, when I click on the new name of paragraph in the paragraph catalog, subsection reverts to a default setting. Now I'm hating life. Someone else had this problem? Know a fix?

    By clicking on apply applies changes (overrides) at the present time

    ONLY selected paragraph. If you want to change the style at all times

    wherever it is used, click on the button update all instead.

    "When the dialog box appears, I said to add the new style to the.

    Catalog and apply it to the document. I'm not sure what you mean by

    This. I've never seen a dialogue window appears when you click either apply or

    Update in the page designer.

  • Problems with sensitive design

    So essentially the responsive design layout for mobile work with my site except for the menu and a title. They don't seem to be setting when you change the size of the screen. Take a look on your phone at the www.btccs.co.uk and you will see the problem. I'll put the code below. Thanks in advance.

    Header html:

    div class = "fluid header" id = "header" >

    < div class = "menu fluid" >

    < ul >

    " < li > < a class ="menu_ul_li_a_href"href =" http://www.btccs.co.uk/contact.php "> contact < /a > < /li > .

    " < li > < a class ="menu_ul_li_a_href"href =" http://www.btccs.co.uk/blog.php "> Blog < /a > < /li > .

    " < li > < a class ="menu_ul_li_a_href"href =" http://www.btccs.co.uk/services.php "> services < /a > < /li > .

    " < li > < a class ="menu_ul_li_a_href"href =" http://www.btccs.co.uk/about.php "> on < /a > < /li > .

    " < li > < a class ="menu_ul_li_a_href"href =" http://www.btccs.co.UK "> Home < /a > < /li > .

    < /ul >

    < / div >

    "< div class ="fluid logo"> < img src="morris_construction/images/logo.png "width ="100% "height ="100% "> < / div >

    < / div > <!--end of header-->

    CSS header:

    . Header {}

    height: 100%;

    Width: 100%;

    background-color: #FFFFFF;

    z-index: 1000;

    top of the margin: auto;

    margin-right: auto;

    position: relative;

    Max-width: 480px;

    Max-height: 81px;

    padding-left: 0px;

    }

    .logo {}

    height: 100%;

    Width: 100%;

    float: left;

    margin-top:-55px;

    Max-height: 85px;

    Max-width: 180px;

    }

    .menu {}

    height: 100%;

    Width: 54%;

    float: right;

    color: #494949;

    background-color: #FFFFFF;

    z-index: 1000;

    Max-width: 45%;

    max height: 51%;

    }

    .menu ul {}

    make-style: normal;

    font-size: 240%.

    list-style: none;

    text-indent: 2%;

    Police-weight: 400;

    do-family: «Sansation regular»;

    Width: 221%;

    Max-width: 480px;

    margin left:-144%;

    }

    .menu ul li {}

    float: right;

    font size: 25%;

    top of the margin: 7%;

    do-family: «Sansation regular»;

    }

    .menu ul li a: hover {}

    color: #D93638;

    }

    {.menu_ul_li_a_href}

    Color: #000000;

    }

    The provision is too broad.  I see a horizontal scroll bar in all windows.   The whole point of RWD is optimization of layouts and never must scroll horizontally to view the content.  Click on the screenshot.

    You also have a CSS code in the menu that makes no sense. For example, z-index does nothing except on the components in position.  Width: 220%, is that all?  I propose to replace the menu, that you now by a reagent.

    Pop-Menu Magic3 of PVII (commercial extension of DW)

    http://www.Projectseven.com/products/menusystems/pmm3/index.htm

    Receptive iconic

    http://www.dynamicdrive.com/style/csslibrary/item/responsive_iconic_menu/

    Receptive hybrid

    http://www.dynamicdrive.com/dynamicindex1/responsivehybridmenu/index.html

    jQuery Superfish

    http://users.TPG.com.au/j_birch/plugins/SUPERFISH/

    jQuery (sensitive on mobile) MeanMenu

    http://www.meanthemes.com/plugins/meanmenu/

    Nancy O.

  • Problems with css-designer panel

    Cannot display properties selectors/CSS - just gives me a grey area empty. When I click in the grey, dreamweaver crashes.

    Does anyone have similar problems and can help?
    Thanks in advance!

    (OS X 10) 7 5. (/ macPro)

    I found a solution that worked for me.

    I removed all the fonts Adobe CC installed out of my library folder: fonts and just left in the base fonts Apple as Arial, Courier etc... Launched Dreamweaver CC and the designer CSS panel work. I don't know exactly what font it is, or creates the conflict. All I know is it works fine now.

  • Problem with CSS Designer in panels

    Hello

    I just joined creative Cloud, I downloaded the latest applications. In Dreamwever, I don't see the CSS designer in the panels. After a few bears of looking for a solution to this problem (throw everything Internet inclusive this Forum), I must ask you Dear assistants to help me

    Yes, where I can find the CSS Designer in the panels? It is not on the right side, it is nowhere.

    Thanks in advance

    aim, Slava

    CSS Designer comes to Dreamweaver CM³, due for release June 17.

  • No custom user interface design

    Hi all.

    My plugin requires some things from design to the model, including circles, lines, and (hopefully) text. However they are * not * part of a user interface custom - in other words, they can remain on the screen during a RAM Preview, for example.

    I tried using Drawbot, but I don't know that I can use for this purpose, the reason being how to make a drawing ref using suites. EffectCustomUISuite1()-> PF_GetDrawingReference() without a context (which looks like to the context is passed as part of a UI event, which I won't)?

    I already wrote a lot of code to draw pixels directly to the screen, which works very well so far, and I can go ahead and write functions to draw shapes using this method; I was just wondering if I'm supposed to use Drawbot for drawing UI no, or if "roll your own" is the way to go here.

    Thank you

    Christian

    Hey christian.

    It is not too complicated. Let's give it a go.

    Basically, AE doesn't know, or he care what how you fill the output buffer.

    especially is not a question of AE, but rather a BONE drawing tools question.

    the only part which concerns the AE API is the part where you copy your results into the output buffer. (we shall return), since you can use BONE on BONE contexts of drawing of drawing tools, it's exactly what we'll do.

    during the call to render, you start the process by creating a new bitmap drawing context (I'll demonstrate on quartz. you will get the general idea). You'll probably want to create the same output of the plug-in buffer size. It is up to you.

    allocation of memory for the graphics context using the suite of memory and use this handle memory with CGBitmapContextCreate(). (research of some code samples there periferial things to do)

    now that you have a buffer of graphics os, you can start to draw.

    CGContextShowTextAtPoint() draws a string

    CGContextDrawPath()'s going to draw a line, ect...

    so.

    Now you have a buffer of graphics os invisible filled with goodies that you want to copy into the output buffer.

    How do you do that?

    Well, remember this handle memory, that we mentioned earlier?

    It now contains the filled buffer, you have just drawn in. it's how to get the base address for the graphical operating system.

    osBufferBaseAddress = suites. HandleSuite1()-> host_lock_handle (osBufferMemHandle);

    Take a look at the example of CCU (in the function of rendering) to see how to access the output directly buffer in RAM and it is advisable.

    Just copy the value of each pixel of the context to the output during the pointer pixel buffer. (it's all there in the sample of CCU)

    Once the copy is complete, get rid of the context, to free memory, and you are finished.

    questions?

    None?

    good.

    :-)

  • Problem with the design view in Dreamweaver CS5

    Hi all

    I'm having a problem with my creation mode on a page I created in Dreamweaver CS5.

    The files can be found here as well as a jpeg file showing the issue I'm having.

    http://www.siltd.co.UK/PRB/

    Everything was fine until I added the three classes:

    {.crproductsrightpanelheading}

    Width: 186px;

    top of the margin: 25px;

    background-image: url (.. / images/crproductsrightpanelheadingbg.jpg);

    background-repeat: no-repeat;

    background-position: left;

    padding-left: 28px;

    do-family: Arial, Helvetica, without serif.

    color: #FFF;

    do-size: 14px;

    line-height: 27px;

    float: left;

    Clear: right;

    }

    {.crproductsrightpanellist}

    Width: 199px;

    top of the margin: 5px;

    padding-left: 5px;

    float: left;

    overflow: auto;

    }

    .crproductsrightpanellist li {}

    do-family: Arial, Helvetica, without serif.

    color: #FFF;

    do-size: 12px;

    list-style-image: url (.. / images/crdash.jpg);

    line-height: 18px;

    list-style-position: inside;

    }

    Now, I can hardly see what is happening.

    It's good in Live View mode and also when published, but design view is like having a steering wheel towards the bottom of my pants... It's driving me crazy!

    What it looks like when published can be seen here:

    http://www.siltd.co.UK/new%20SI%20Site/crproducts.html

    Any help telling me where I went so wrong would be appreciated.

    Thanks in advance.

    Andy

    Run your pages through this validator and clean up any errors...

    http://validator.w3.org/

    For now, you have a large number of errors that need to be addressed, about 90 altogether.

    While some browsers allow to better interpereting what you wanted to do than others (IE being the absolute worst), DW is a maniac, especially in Design view. It is still displayed incorrectly in DW after you fix all the problems, after return and we can take a closer look.

Maybe you are looking for

  • Skin allergy by Apple Watch

    I have a 42 minutes of Sport gold Rose with blue Sport Group and within 48 hours of warning had strong itching on the wrist to the area where the 'lock' metal touches the skin. This itch soon became a full eruption of rash and bleeding. After contact

  • How can I get rid of the floating bar to social media

    Whenever I select the text on a Web page a floating bar to social media (action FB, G +, Twitter and Gmail) appears above the text - it's a distraction and I want rid of it. Clues?

  • Satellite A300 - recovery to factory settings

    I have recently updated from vista to Windows 7 and now I press F8 during the restart of my pc and access the repair mode option configure initial Setup no longer, even if the files on the second partition of HARD drive for this purpose remain there

  • HP laptop: computer startup

    I turned on my laptop and it says no bootable device insert disk

  • failures of postmaster

    I get postmaster failures of same discount you I receive all messages. My friends get the opinion and I always get my emails. Now, when I send pictures on my laptop I get a Postal failure on my phone, but my photos are always delivered. Does anyone h