Problem of lag DAQmx in LabVIEW

Similar Questions

• Need to find installers DAQmx and LabVIEW. Lost installation CD.

  I have LabVIEW full edition and the Application Builder.  I am trying to build a stand-alone application with the application builder and I need the following additional installers:

  OR LabVIEW Run-Time Engine 2010

  NOR-DAQmx Base Runtime 9.1.5

  I lost my CD to install LabVIEW 2010.  These installers are available on the Web?  I tried without success.  Thank you for your help.

  RogerK wrote:

  I have LabVIEW full edition and the Application Builder.  I am trying to build a stand-alone application with the application builder and I need the following additional installers:

  OR LabVIEW Run-Time Engine 2010

  NOR-DAQmx Base Runtime 9.1.5

  I lost my CD to install LabVIEW 2010.  These installers are available on the Web?  I tried without success.  Thank you for your help.

  Hello

  You can download the run time of the website NOR, as also the DAQmx

  LabVIEW:

  2010SP1

  http://Joule.NI.com/nidu/CDs/view/p/ID/2292/lang/en

  2010 min 32 bits

  http://Joule.NI.com/nidu/CDs/view/p/ID/2088/lang/en

  2010 standard

  http://Joule.NI.com/nidu/CDs/view/p/ID/2087/lang/en

  DAQmx Base:

  9.5.1

  http://Joule.NI.com/nidu/CDs/view/p/ID/2934/lang/en

  9.1.7

  http://Joule.NI.com/nidu/CDs/view/p/ID/2206/lang/en

  Just search in blogs or any time of the performance you need.

  You can even download drivers daqmx if needed

  http://Joule.NI.com/nidu/CDs/view/p/ID/2934/lang/en

• No screws daqmx in labview 2014 64 bit

  Hello

  I have daqmx 14.0 installed on my Win 64 bit PC and LabVIEW 2014 SP1 32 bit. Today I installed LV 2014 64-bit on my PC and I don't see any DaqMX screws under the section i/o measure. And when I opened my project compiled in 32-bit LV 2014 then computing begins looking for screws DaqMX and I point it to "C:\Program Files (x 86) \National 2014\vi.lib\DAQmx" but the daqmx vis are broken.

  When I click on the run button broken, the error list displays 2 errors:

  (1) VI couldn't carpule

  (2) external component or missing driver

  It seems that I need to install special drivers for daqmx, so I downloaded daqmx 14.5 of the or site and during installation when it asks the path is by default "C:\Program Files (x 86) \National" but I changed it to "C:\Program File\National Instruments\" and the installation program gave an error message that I can't install the 32-bit files in 64-bit folder.

  How to solve this error?

  Thank you

  Ritesh

  LVCoder wrote:

  So should I just uninstall daqmx from my PC and re-install again. or do I uninstall labview and daqmx together and then install daqmx and labview?

  Reinstall everything DAQmx.  It will install only the parts you need, in this case, it should just be support for LabVIEW.

• I don't have a Vi DAQmx in LabVIEW

  Hi all

  I recently downloaded Labview 8.5 on my computer (free student version). I also installed the Driver nor-DAQmx hardware to the computer and the acquisition card (BNC-2120).

  Everything works fine. Only, I would use DAQmx Labview Vis and I can't find them.

  Is there a reason? How can I find/download them?

  Thanks for your help.

  Alexandra

  Do you have what DAQmx version installed?  It seems that the latest DAQmx version that will work with LabVIEW 8.5 is DAQmx 9.3.  If you have installed something more recent, it will not work with LabVIEW 8.5.

  DAQmx and LabVIEW version compatibility

• NOR-DAQmx for LabView 2010 SP1

  I am looking for the installation of NOR-DAQmx for LabView 2010 64 bit SP1 package?

  Yes.  Do not change the destination directory.  The drivers will be add support for any version of LabVIEW, you installed from LabVIEW 2010.  This includes 32-bit and 64-bit versions.

• Erase a hard drive because of problems with lag/rotation of the Apple balls, but my CC apps have disappeared.

  Hello

  I had to wipe my hard drive due to problems of lag/spinning apple apps balls/does not respond.  Now my second download of CC on this computer have disappeared and when I go in the CC Manager, I can only download an evaluation version or buy.  I pay every year for my CC apps.  What can I do to get back them on this computer again?

  Thank you.

  Hello

  I don't see any subscription on your email address associated to your Forum ID. However, if you have a subscription with any other email address please use to download creative cloud desktop application using the following link https://creative.adobe.com/products/creative-cloud

  If you have already downloaded the desktop application and deal with the issue of the trial error please follow the steps mentioned on the following links

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Resolve error messages and issues (disconnect) deactivation and activation Adobe Creative Cloud (login)

• Problem after update DAQmx 15.5.1

  Just updated DAQmx 15.5.1 on the host computer. Try to use MAX to update the DAQmx software on the PXI system at 15.5.1 as well, but I received the following error message:

  

  I would appreciate any suggestion to determine this.  I'm using LabVIEW 2015 SP1.

  I use the OTR (pharlap) on the PXI system.

  I think that MAX has some issues to resolve dependencies. I actually fixed this problem manually set these 4 packs of resettlement in MAX and the update of DAQmx. MAX will become meaningless and crash if I was not choosing these packages in a certain order, so it took me some trial and error. In the end, when I select all packages associated update DAQmx together these 4 packages to reinstall, the installation process would go through.

  I suppose that if I format and reinstall the system on PXI system, it can also work, but I wasn't looking at it.

• DAQmx for Labview 8.0 support

  I'm having a problem with the current drivers of DAQmx

  The system used to run perfectly when you use labview 8.0, however, after the installation of labview 2009

  The library of data acquisition in labview 8.0 folder is missing.

  I tried to install the old version of the DAQmx (inheritance), but I still can't get the library in labview 8.0 folder.

  Would it be possible to get these files?

  Thank you

  Ahmad Aladdasi

  Mechatronics Engineer

  This, unfortunately, happened to a number of people before. See, for example: http://forums.ni.com/t5/Multifunction-DAQ/How-to-downgrade-from-NI-DAQmx-9-0-2-to-8-7-1/td-p/1016683

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Problems of lag with Safari/Youtube

  Hey guys, I had this problem for a while:

  When I close the Youtube tab (normally with a video) to get to the next tab, tab Youtube sometimes freezes for a few seconds before closing completely.

  Then Safari starts getting lag, "restless" and slow, even when I'm on Facebook or other websites in general. I noticed that my Mac starts to slow down too.

  The only way I have temporarily resolve this problem is to remove the story and the datas of Safari and start over. Or what Mac is becoming seriously lag is to restart (it happened seldom).

  This problem has occurred before the update to OS X El Capitan 10.11.3 (I thought that it improved...)

  Clues or suggestions on what to do?

  • I have never installed readers flash, adobe etc...
  • I don't have a plugins, web extensions installed.
  • I décliqués Plugin Internet on Safari, thought preference that he touched it...
  • This Youtube problem never happens with Chrome
  • I have a Macbook Pro OS X El Capitan 10.11.3, retina

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

• problem with MAX after installing LABVIEW 10

  Hello everyone, I have a serious problem I installed labview 10 yesterday on 2 laptops, one of them works perfectly, however, the other gave me a two erros

  1.http://digital.ni.com/public.nsf/allkb/6CA56E2DDBCCA06086257591006141EE

  2. http://digital.ni.com/public.nsf/allkb/F24AA9FB6A3A0E9D86257539006141BE

  I tried the solutions above in the link, but it was all futile. can someone please suggest me what would be the problem? I had already LV8.0 on the laptop which is the cause of the problem. I tried to re - install the disk driver given

  for me by NEITHER, but no luck.

  When I started the laptop for the 1st time, there was a mistake in saying DOS command prompt: DATABASE ERROR and I cancelled the error!

  In addition, Labview works fine, its only MAX who has problems. is there a way I can only MAX to uninstall and reinstall? Please help me...

  Thank you

  Sorry CrackJack

  Try this one http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument    

• Problem installing module time real LabVIEW 2011 SP1

  Hi, I'm new here. I have a problem when I tried to install LabVIEW Real - Time 2011 SP1. Whenever the part of initialization, this message appears: "NEITHER Labview 2011 SP1 32-nit must be installed before installing the OR labview 2011 SP1 real-time Module.» I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well. I use a Windows7 OS and also have Labview 2010 and an older version of Labview 2010 RT module installed. I didn't remove the old version of the software, and I don't know if it is related to this problem.

  Can anyone help? Thank you in advance!

  MrSun87 wrote:

  ... I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well...

  Can post you a screenshot of MAX where are installed Versions of LabVIEW?

  Christian

• Problem with the combination of LabVIEW (dynamic distribution) classes, statechart module and module FPGA

  LOCATION:

  -I am developing a software plugin based on plug-ins based on LabVIEW classes that are instantiated in running. Plugin real classes come from the plug in generic classes that define interfaces to the VI instantiation and can provide basic functionality. This means that many of the methods of the class are dynamic distribution and even methods of child classes can call the parent method.

  -Plugins top level (the ones directly accessible by the main VI) each have a run method that animates a plug-in specific state transitions.

  -Transitions of the plug-in data acquisition (DAQ class) class calls a method of the DAQ class that reads data from an FPGA card OR and transmits to another component via a queue.

  PROBLEM:

  -Higher sampling rate, a FPGA-to-host FIFO overflow occurs after some time. When I "weigh" the system just by moving a window of Firefox browser on the screen, the overflow is triggered immediately. I did not have this kind of problem in older software, where I was also reading a FIFO of FPGA, but made no use of LabVIEW classes or diagrams.

  SOLUTIONS I'VE TRIED (WITHOUT SUCCESS):

  -J' put the transitions in a timed (instead of a simple while loop) loop that I assigned specifically to an own kernel (I have a quad-core processor), while I left all the other loops of my app (there many of them) in any simple loops. FIFO overflow still occurs, however.

  QUESTION:

  -Does anyone have a tip how I could fix this problem? What could be the cause: dynamic distribution methods, the acquisition of data of state transitions or just the fact that I have a large number of loops? However, I cannot change the fact that I have dynamic distribution methods because it is the essence of my architecture...

  Tips are greatly appreciated!

  I've now changed the execution priority of all the screws involved in reading of the FPGA FIFO '(highest) priority critical time '. This seems to be improving the situation much: so far I have not a FIFO overflow, even when I move around the windows on the screen. I hope it stays like that...

• Problem with NOR-DAQmx Base on Scientific Linux 3.4

  Hello everyone.

  I'm trying to install the driver OR-DAQmx Base 3.4 on Scientific Linux 6.0, but I got these errors:

  

  On this text said that Scientific Linux 5.4 and 5.5 is supported.

  Can anyone help me or 6.0 is not supported?

  Hello decadence,

  Thank you for posting.  Your post, it seems that the problem occurred while trying to install NI VISA 5.0.  Unfortunately, the only versions of Linux that are officially supported by our pilots and implemented to date are those listed in the Readme of each product.  In the Readme for NEITHER VISA 5.0, Scientific Linux versions 5.x are supported, but Scientific Linux 6.0 is not in this list, nor in the Readme for DAQmx Base 3.4.  I hope this helps.

  Kind regards

  Joe S.

• Problems during execution of a LabVIEW VI in a new thread under TestStand sequence and execution of the MainSequence in step by step mode

  Hello

  We want to run a VI in LabVIEW (LV2011) at the same time to the execution of a sequence of test of TestStand (TS2010). The VI should view the condition of the equipment, while the test sequence is written in TestStand. It would be a nice feature of debugging the TestStand sequence while watching the State of the material in the LabVIEW Panel, too.

  This is where it's our problem. Imagine that you have a MainSequence calling a subsequence in a new thread, which runs the LabVIEW VI. After the call, the MainSequence continues its progression, as it is configured to do this. But if we want to execute the MainSequence in step parallel execution of VI mode, we can do that. The controls for "Step Out" etc. are grey.

  I tried to build a very simple example to explain what I mean. It's just a sequence and a LabVIEW VI, no real functionality, just take as an example for our problem.

  Any tips? What we're doing wrong? Is there something that needs to be changed in the LabVIEW VI?

  Best regards

  Manual

  You should use the monitor of the termination and the ExternallySuspended APIs for the EIS to running asynchronously. There are screws of wrapper around these APIs in the LabVIEW TestStand palette.

  For more details see using the API for the following:

  Thread.ExternallySuspended

  Execution.InitTerminationMonitor

  Execution.GetTerminationMonitorStatus

  Unless I am struggling to understand what you're asking, if you are using these APIs, you should be able to make it work as you are eager to do things.

  -Doug