Problem of Listener

Similar Questions

• Problem with Listen.vi Linux TCP

  I have a Linux machine that is configured with two IPS (192.168.0.X), with a physical ethernet taken.  When you run a program on it (using Listen.vi TCP) to connect ethernet to a remote computer, it works fine.  If the program is re-entrant, and I have two of the programs running simultaneously, each with unique IP address and a port number, it still works very well.  If I use the same IP address for both of them, but the unique port numbers, it still works very well.  However, if I use unique IP addresses but the same port number for each of them, I get error 60 (connection already in use).

  For example,.

  192.168.0.11:6000 and 192.168.0.12:6001--> OK

  192.168.0.11:6000 and 192.168.0.11:6001--> OK

  192.168.0.11:6000 and 192.168.0.12:6000--> error 60

  I tried the wiring to the specific IP address in the TCP Listen.vi, nothing helped.

  Any ideas on why this could be implemented?

  Thank you in advance.

  A fix for the problem, after discussing this with an engineer NOR is attached.

• Problems installing listener apex 2.0.5 in Tomcat 7.0.32

  Hi all, hope someone can help me with this problem.

  Oracle DB: 11gR 2

  Apex version: 4.2.0

  Tomcat version: 7.0.32 on linux

  I have problems to install listener apex 2.0.5 in Tomcat 7.0.32

  I followed the step by step installation instructions, I configured the Auditor in accordance with the instructions, once configured I deployed the listener in Tomcat as the manual says, a t access with the browser time (https://cyaprod03:8443 / apex) I get the following error: "this installation has not been configured yet"

  
  In the catalina.out file see this: DB No. found for connection: / apex /.

  SERIOUS: no pool not found for https://cyaprod03:8443 / apex /

  In this Tomcat, I installed the 1.1.4listener and access the same basis that I'll put up the 2.0.5 version and it works without any problem

  
  

  Default.Xml
  

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  <! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

  Properties of <>

  < comment > saved on Tue Feb 18 14:39:24 CST 2014 < / comment >

  < key "cache.caching entry" = > false < / entry >

  < key = "cache.directory entry" > / tmp/apex/cache < / entry >

  < key = "cache.duration entry" > days < / entry >

  < key = "enter cache.expiration" > 7 < / entry >

  < key = "enter cache.maxEntries" > 500 < / entry >

  < key = "enter cache.monitorInterval" 60 > < / entry >

  < key = "cache.procedureNameList" / entry >

  < key = "cache.type entry" > lru < / entry >

  < key = "db.hostname entry" > cyaprod01 < / entry >

  < key = "db.password entry" > @05AD590B48DE4DDAA1FF3B4CE431A7DADA546740A15C9F9232090DC2C5CF28AAF5 < / entry >

  < key = "enter db.port" > 1521 < / entry >

  < key = "db.sid entry" > ORCL < / entry >

  < key "debug.debugger entry" = > false < / entry >

  < key "debug.printDebugToScreen entry" = > false < / entry >

  < key "error.keepErrorMessages entry" = > true < / entry >

  < key = "enter error.maxEntries" > 50 < / entry >

  < enter key = "jdbc. DriverType"> thin < / entry >

  < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

  < enter key = "jdbc. InitialLimit' > 3 < / entry >

  < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

  < enter key = "jdbc. MaxLimit' 10 > < / entry >

  < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

  < enter key = "jdbc. MinLimit"> 1 < / entry >

  < key = "enter jdbc.statementTimeout" > 900 < / entry >

  < key "log.logging entry" = > false < / entry >

  < key = "enter log.maxEntries" > 50 < / entry >

  < key = "misc.compress" / entry >

  < key = "misc.defaultPage entry" > apex < / entry >

  < key "security.disableDefaultExclusionList entry" = > false < / entry >

  < key = "enter security.maxEntries" > 2000 < / entry >

  < / properties >

  Saludos

  I think the listener APEX for Tomcat, at least, installation instructions are pretty poor.

  What worked for me:

  1. decide where the listener must find the configuration files:

  java-jar ords.war "c:\My STUFF\conf APEX" configdir

  This changes the web.xml file in the ords.war file to get a reference to the expected configuration directory.

  2. perform the standard installation:

  java-jar ords.war of installation

  This creates a few xml configuration files, etc. in a place where he mentions at the start of the installation - it does not change the war itself file.

  3 deploy the ords.war in webapps

  This creates the ADR structure directories above webapps, including our modified web.xml. It also creates a directory structure starting with "ADR" in the location that we have specified for the configuration directory.

  You must now copy the files in step 2 configuration in the configuration directory created by step 3 - you will spot the similarity in the directory structures and Appendix A of the installation guide explains what that is the structure and the files do.

  You should now be able to connect to APEX, the location of the "ADR" on Tomcat.

  Good luck!

• Problem of Listener question.

  Hi all
  
  I have two databases but both using a single listener, Oracle_Home is different for the two DB. I want to create a listener for each DB. So, if I want to stop the process of listening to a DB, which will not affect the other DB connection.
  
  Here's my original first DB files.
  
  TNSNAME.ora-
  
  WOT_BNE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOT_BNE)
  )
  )
  
  
  
  WOT_GS =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = syd2ora2) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOT_GS)
  )
  )
  
  
  
  WOT_GS2 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = syd2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOT_GS2)
  )
  )
  
  
  DW_BNE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = DW_BNE)
  )
  )
  
  
  -listener.ora
  LISTENER =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  )
  )
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = WOTIF_DW)
  (SID_NAME = WOTIF_DW)
  (ORACLE_HOME = u07/app/oracle/product/11.1.0/db_1)
  )
  )
  
  
  SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF
  INBOUND_CONNECT_TIMEOUT_LISTENER = 120
  
  
  
  
  
  -A single file here for my other db.
  
  -tnsname.ora
  
  WOTIF =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOTIF)
  )
  )
  
  WOTIF_DW =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOTIF_DW)
  )
  )
  
  
  
  There is no listener for this DB file because listener listener the first DB file entry.
  
  
  -Now what I did--
  
  I created separate listner and tnsfile for the two DB but I'm not able to start receiving separated.
  I stop and start original listner but who always shows my other DB connection.
  and if I want to start my new listener, then said that...
  
  AMT-01106: listener by using the name of the LISTENER listener has already begun
  
  -Here is my new files that I've updated...
  
  -First listener.ora DB
  LISTENER =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  )
  )
  
  SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF
  INBOUND_CONNECT_TIMEOUT_LISTENER = 120
  
  
  -First DB tnsname.ora
  
  WOT_BNE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOT_BNE)
  )
  )
  
  
  
  WOT_GS =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = syd2ora2) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOT_GS)
  )
  )
  
  
  
  WOT_GS2 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = syd2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOT_GS2)
  )
  )
  
  
  DW_BNE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = DW_BNE)
  )
  )
  
  # Added to the listener that separates WOTIF_DW and DB WOTIF.
  
  WOTIF =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOTIF)
  )
  )
  
  
  
  -The second DB listener.ora
  LISTENER_DW =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  )
  )
  
  SID_LIST_LISTENER_DW =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = WOTIF_DW)
  (SID_NAME = WOTIF_DW)
  (ORACLE_HOME = u07/app/oracle/product/11.1.0/db_1)
  )
  )
  
  
  SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF
  INBOUND_CONNECT_TIMEOUT_LISTENER = 120
  
  -The second DB tnsname.ora
  
  WOTIF_DW =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = bne2ora3) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = WOTIF_DW)
  )
  
  )
  
  
  
  I'm on a Linux machine
  and my first DB's
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  Is the second DB
  
  Connected to:
  Oracle Database 11 g Release 11.1.0.7.0 - 64 bit Production
  
  
  
  
  Please guide me where I am doing wrong.
  
  Thank you
  
  Published by: PK on August 10, 2011 20:01

  PK says:

  I want to create a listener for each DB.

  Why? What problem are you trying to solve? A single listener for multiple instances of database is the norm - not the exception.

  You realize that a listener of 2 will not be able to use the same port tcp as a listener of 1st? A tcp port cannot be shared as an endpoint listens. This means that your 2nd listener must use port 1522 and 1527 and not of 1521.

  This also means updating all the customers there and in ensuring that their TNS connection strings connect the correct for the required database instance tcp port.

  It all seems totally unnecessary and create a client-server Oracle more complex and less robust environment by introducing a second listener without obvious reason at all...

• Problem while listening to Radio FM

  Hello

  I can't listen to the radio while I work with it, but when I turn it on "stand by mode" begin to hear. I already read the settings and I can't change it.

  The radio worked well, I Don t know what is happening.

  Thanks for the help!

  Have you enabled 'ok google' of any screen?

  Goto: Settings > accounts > Google > Search > voice > 'ok google' detection.

  If the settings is active, try to disable the feature and see if that helps.

• Start / Paging file / TEMP / Drive problem fusion (listen to me)

  Hi everyone, expensive computer scholars.
  I am once again an urgent need of your help and knowledge.
  Get straight to the point, I have a newly purchased Lenovo with Windows 7 x 64 on this computer. I bought it in China.
  When I bought it, I noticed that he had four drives of 250 GB of space for each, so I decided to merge them using one of these programs, I think it was the partition Wizard.

  I merged the so: C and D in C and E and F in D
  Now he was never the same, as if one could say that the Fire Nation attacked.
  Sometimes, I would get a blue start-up screen, even if it does not disappear with a reboot. I can't update Windows, which is more annoying, but could be due to the fact that the computer has a Windows English with a Chinese BIOS on this matter, I do not know (I digress from the topic here, but BTW if this is also something, I can't update my BIOS, even from lenovo page)
  But it's the biggest problem I have this message that occur whenever I have start and open my session.

  "Windows will create a temporary swap file on your computer because of a problem that occurred with your paging file configuration when you started your computer. File size of total paging for all disk drives may be a little larger than the size you specified.

  I know it's a pretty classic, or classic problem, but I've never seen such results. And I went through a few forums, without answers. As a result, I can't install anything, really, I have an antivirus at the moment and that makes me nervous. Also, I can't create a hotspot for daughter mah, so, you know, it's basically *.
  Oh dear users, please help! I would be happy to send you a form you need and follow all your instructions to the letter.

  Thanks for reading and good luck. On the contrary, this computer is very important to me, I need to work, and now that I bought it, I'm broke.
  In any case, thanks for reading and thanks for the responses.

  Hello

  We are here to help.

  It seems that your virtual memory settings are lower than usual. Virtual memory is a combination of RAM and disk space that is used during the process execution. To change the virtual memory settings, please follow the steps below:

  1. Log in as administrator
  2. Open virtual memory settings by clicking the Start button
  3. Click on Control Panel
  4. Click on system and Maintenance
  5. Click system of
     
  6. Click on Properties
  7. Click Advanced system settings
     
  8. Click the Advanced tab
  9. Under performance, click settings
  10. Click the Advanced tab
  11. In accordance with article virtual memory , click the change button
  12. Uncheck the automatically manages the size of pagefile for all drives checkbox.
  13. And then, click System managed size if you want that your system will be one that will put the necessary memory.
  14. Otherwise, you can put on your own by choosing Customize size and enter the initial size and maximum size.
  15. Click OK

  Let us know how it goes.

• Problem of Listener after changing the host name &amp; ip address of a node

  Environment - Oracle 11g R2 is installed in the OEL 5 (node Oracle VirtualBox). Voluntarily, I changed the IP address and the host name of the node for use as a node pending. What are the changes that are needed to make in listener.ora and tnsnames.ora file?
  
  Thanks in advance.
  
  Kind regards
  Sandy
  
  Published by: 918868 on October 26, 2012 20:21

  issue following commands OS below

  lsnrctl stop
  CD /home/oracle/app/oracle/product/11.2.0/dbhome_2/network/admin/
  MV listener.ora listener.ora.sav
  lsnrctl start
  lsnrctl status
  # now wait 65 seconds before continuing as below
  lsnrctl service

  COPY orders & results from above, then PASTE it back here

• Problem of Listener Net SQL

  I just installed a new instance Oracle 11.1.0 on RHEL 4 x 86-64. I used dbca to create the database and when I tried to connect, I couldn't. I used netca to configure a listener.ora and I received a message stating that "the information provided was used by another auditor. I don't see another auditor running.
  
  When I try to tnsping from the server, I get:
  
  tnsping CARDTEST
  
  AMT Ping utility for Linux: Version 11.1.0.6.0 - Production on October 21, 2009 11:37:57
  
  Copyright (c) 1997, 2007, Oracle. All rights reserved.
  
  Use settings files:
  /U01/app/Oracle/product/11.1.0/CARDTEST/network/admin/SQLNET.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.200.16.23)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = CARDTEST)))
  AMT-12541: TNS:no listener
  
  
  
  I get the following errors when I try to connect:
  
  Error listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (PORT = 1521)))
  TNS-12545: Connect failed because target host or object does not exist
  AMT-12560: TNS:protocol adapter error
  TNS-00515: Connect failed because target host or object does not exist
  
  MY INTERLOCUTOR. NEWSPAPER:
  
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.361 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt > system settings file is /u01/app/oracle/product/11.1.0/CARDTEST/network/admin/listener.ora
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.361 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt > log messages written to /u01/app/oracle/diag/tnslsnr/cardtest/listener/alert/log.xml
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.361 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt > trace information written to /u01/app/oracle/diag/tnslsnr/cardtest/listener/trace/ora_6564_182937849664.trc
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.361 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt > Trace level is currently 0
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.361 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt >
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.362 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt > Started with pid = 6564
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.363 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt > error listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (PORT = 1521)))
  < / txt >
  < / msg >
  < time msg =' 2009-10-21 T 10: 42:28.363 - 05:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
  type = 'UNKNOWN' level = '16' = 'cardtest' host_id
  host_addr = "UNKNOWN" >
  < txt > TNS-12545: Connect failed because target host or object does not exist
  AMT-12560: TNS:protocol adapter error
  TNS-00515: Connect failed because target host or object does not exist
  
  < / txt >
  < / msg >
  
  
  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.1.0/CARDTEST/network/admin/tns
  Names.ora
  # Generated by Oracle configuration tools.
  
  CARDTEST =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.200.16.23)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = CARDTEST)
  )
  )
  
  
  Thanks for your help.

  Hello

  There is no listener running as in the following.

  ps - ef | grep lsnr
  root 7060 7037-0 12:28 pts/7 00:00:00 grep lsnr

  Also, it seems that you are working on the system as root. Please login to the server as the oracle software owner. Then start the listener as

  Starting from $ORACLE_HOME/bin/lsnrctl

  Then you should be able to tnsping to the database.

  Concerning

• Problem of Listener in Oracle

  Hello
  
  Whenever I start my computer I had to start the listener and the database.
  
  is there any mechnaism whnever, I start the machine I have never started the receiver and the database, it will be automatically started.
  
  Any help will be necessary for me

  "Linux" is a generic term. It would be more useful to specify a version and a special distribution.

  A quick search on Google 'Oracle linux' at startup returns thousands of hits. Tim Hall has a good [overview of Autostart | http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php]. You may prefer a set of specific distribution of installation instructions, however.

  Justin

• Problem of Listener while improving the 10g 9i

  Hello
  
  We are underprocess R12 upgrade, in the frame or R12 upgrade right now we are doing the upgrade from 9.2.0.6 to 10.2.0.4 DB
  
  for DB Upgrade:
  Installing Oracle Database 10g. (Software only).
  d > install the accompanying CD.
  e > game patches to install 10.2.0.3
  f > create the directory nls/data/9idata
  g > install 10 g Listener_
  
  to install new 10g listener, I stop 9i earpiece and using netca I created the new listening port, but I am not able to make it appear the oracle 10 g Home development banks
  
  ==========================================================
  [oracle@upg PROD_upg] $ lsnrctl start PROD_10G
  
  LSNRCTL for Linux: release 9.2.0.6.0 - Production on March 19, 2009 06:40:04
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  Start/u01/10204 / / bin/tnslsnr: Please wait...
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production
  System settings file is /u01/10204/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1521)))
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=upg.oracle.com) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Linux error: 111: connection refused
  ======================================================================
  
  Here is the information from the log file
  ==========================
  Cat /u01/10204/network/log/prod_10g.log
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:02:39
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/proddb/9.2.0/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 19904
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1523)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:03:07
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/proddb/9.2.0/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 19910
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1523)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:39:17
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/10204/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 20362
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1521)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
  
  TNSLSNR for Linux: release 10.2.0.4.0 - Production on March 19, 2009 06:40:04
  
  Copyright (c) 1991, 2007, Oracle. All rights reserved.
  
  System settings file is /u01/10204/network/admin/PROD_upg/listener.ora
  Log messages written to /u01/10204/network/log/prod_10g.log
  Trace information written to /u01/10204/network/trace/prod_10g.trc
  Trace level is currently 0
  
  Started with pid = 20373
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=upg.oracle.com) (PORT = 1521)))
  Listener completed notification to the CRS start
  
  TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE

  Hello

  You try to start the listener PROD or UPG?

  What is returns 'lsnrct start PROD "?

  Please make sure you set ORACLE_HOME and ORACLE_SID manually to 10g ORACLE_HOME before starting the listener. Also, make sure that the env 9i database file is not defined in the oracle user profile.

  Kind regards
  Hussein

• Problem with the listening Service: Long delay beginning listener, intermittent connections

  I have problems to connect to my Oracle database.  I don't know what was the cause, but now when I connect to a database that has been working well for the past two years, I usually get an ORA-12541 error.

  I run lsnrctl status on the server and get a prinout like this:

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dqaswn02) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 61: unknown error
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 2: no such file or directory

  I also tried to manually stop the service through services.msc, then by restarting via lsnrctl start, but when I do this I get a very long delay (10 + minutes) before he comes back with something like:

  TNS-01153: failed to process the string: 0i ≈ ♥
  

  I'm quite lost as to what is wrong.  I've been messing around with listener.ora, but I don't see anything difficult in there.  Here's a copy:

  listener.ora # Network Configuration file: E:\app\myc0714\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = E:\app\myc0714\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\myc0714\product\11.2.0\dbhome_1\BIN\OraClr11.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = dqaswn02) (PORT = 1521))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )

  # ADR_BASE_LISTENER = E:\app\myc0714
  LOG_FILE_LISTENER = LISTEN PORT
  TRACE_LEVEL_LISTENER = SUPPORT
  TRACE_FILE_LISTENER = LISTEN PORT

  A few times during that time, I was able to connect to the server, via sqlplus, however, it took 10 minutes before the connection is online.  Once I'm connected, I can ask my paintings as expected, but I need an application to connect.

  If anyone has any ideas on what could be the problem, please let me know.
  

  In fact, there was another thing, I changed when I finally got it works, although I don't know if it was related or not.  In my folder with my track logs, I had a huge (> 4 GB) listener.log file.  I deleted this file right before that I ran the command netsh command to reset and then restarted.  This file was also a bit special, because it had not been updated since around the time that I first encountered this problem.  It seems to be updated on a minute by minute basis, now that I've removed the old.  Is there a problem with this file becomes too big?  My drive was not out of space, but it is very curious that this stopped file update on the same day as when I started having the problem and now works properly again.  I wish I had noted the exact time until I deleted it.

  Link:

  Problem of Listener.log & #8211; large file | Obtained & #039; s Blog

• sound slows down and is truncated when listening to radio stations began to do this recently win xp system

  This issue has occurred only recently listening to my radio channels, the sound is very tinny bland and out finally quite so jump gun missing words, I do not understand what I did nothing else that I know that I use a windows xp system help would be very appreciated

  Hello

  If I understand the question, you have a problem with slow while listening to the radio. Please let me know if this is not correct. I understand that it must be frustrating, but don't worry, we are here to help solve your problem and guide you in the right direction.
  Faced with this problem while listening to radio channels?
  Method 1:
  You try to install the latest driver on the manufacturer's Web site and check if it helps.

  (a) click Start, click Control Panel, and then double-click System of .
  (b) click on the tab material.
  (c) expand sound, video and game controllers.
  (d) double click on the sound card, and then click the driver tab .
  (e) click the update driver .
  (f) follow the Hardware Update Wizard to update the sound card driver.

  
  Reference: How to update a sound card driver in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/166774
  Method 2:
  If the problem persists I suggest you try the procedure described in the article and see if it helps.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/NL
  Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.

• Impossible to listen to the two Internet radio stations

  Hello, I wonder if someone has posted before me on the problems of listening to two Internet radio stations: folkradio.ge and radiomarma.com. Since November 2010, I had this problem, and to folkradio.ge, I get an error message indicating that the server may be down for maintenance.  I wonder if the problem is only on the end of the server, or if I need some codecs, or both.  Regarding radiomarma.com, I don't know if it's playable in WMP.  All I see is a black box with no error message.  Is there someone out there who can help you?  Thank you!

  Hello

  ·        Were you able to listen to these channels of radio before on the system?

  ·        Are you able to listen to other channels of radio without any problem?

  With folkradio, it is a known issue and even the broadcast of Radio Marma servers are down:

  http://www.RADIOMARMA.com/listen.m3u

  I suggest you to contact radiomarma and folkradio for additional support. Check the links below.

  www.RADIOMARMA.com

  www.folkradio.GE

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of sound headphones Xperia Z5P with applications

  Basically I have a sound quality perfect with my new Z5P when you use the default music app

  It is the same with my other apps like youtube, shaking and video players

  But when I plug my headphones, there are problems

  I have no problem with listening to songs with the music app, but the sound quality is very poor with static noise when I play videos with other applications.

  Looking for a solution for this, thanks guys!

  Hi @Scyrus,

  Welcome to the community.

  Do you have any other headphones, you can test this?

• Listener is the addition of several times

  Hello

  My app account number of messages send by user for this I wrote to count the messages app. I did it using sms listener concept, but the problem is listener sms adding several times. Whenever I start the app it adds a listener most. Anyone has idea how to add sms listener only once?

  Please help me on this

  RuntimeStore runtimeStore = RuntimeStore.getRuntimeStore();
  if( runtimeStore.get(MYKEY) == null ) {
     MyListener myListener = new MyListener();
     runtimeStore.put(myListener,MYKEY);
  } else {
     MyListener myListener = (MyListener)runtimeStore.get(MYKEY);
  }