problem of machine virtual 64-bit

Similar Questions

• Longmode required to run the machine virtual 64-bit - ESXi5

  I have a PC with processor i3 intel VT and Intel 64-bit enable in the BIOS. In addition to this, I installed windows 7 64-bit ultimate and then installed Vmware workstation 7.

  On this woekstation, I installed ESXi5 without any problems and when I connect to VI cline tof ESXi5 and when I tried to create 64 bit VM, it gives me an error like below, when you start the virtual machine.

  This virtual computer is configured for 64-bit guest operating system. However, 64-bit performance is not possible. Longmode is disable for this virtual machine.

  Please find attached snapshot of the configuration of the virtual machine and error.

  I'm 100% sure that Intel VT is enabled in the BIOS.

  Please help on this.

  Kind regards

  Selim Desai

  VCP410

  If you are wanting to run nested 64 bit guests then the basic hypervisor has to ESXi 5 / 8 Workstation or Fusion 4.  For nested 32-bit clients is not the case.

• Machine virtual 32-bit on 64-bit host

  I moved a windows 2003 32-bit computer to a 64-bit host. I would like to upgrade the virtual machine to Windows 2008 R2, is anyway that I can do the virtual machine 64-bit?

  The host is running ESXi 5.

  Hello

  Not a limitation of vmware as such in this case, rather a cross-microsoft architecture upgrades are not supported

  See - http://technet.microsoft.com/en-us/library/dd979563(v=ws.10).aspx

  This would be the case with any hypervisor

• Run a machine virtual 64-bit on ESX4i with an Intel Core2Quad Q9450

  I try to install Windows Server 2008 R2 which only runs on 64-bit processor.

  I managed to install on a Core i7 CPU but even if I updated the OS setting in

  Windows Server 2008 R2 64-bit, the installion CD tell me that I can't install it

  on a 32-bit CPU...

  The Q9450 is not compatible with 64-bit virtualization?

  I won't be able to install 2 WS2008 R2 DCs on 2 different ESX4i host.

  belangermtl wrote:

  I restarted the ESX4i host and the BIOS has active VT - d.  All the other options are enabled.

  VT - d is not relevant.  However, if all other options are enabled, this could be your problem.  Note that "the execution of confidence" must be disabled.

  Maybe I have to start with the ISO talking about VMware Knowledge Base article.

  After that, I could use the special parameter in ESX4i workaround with some CPUS where

  some core are not active VT...

  ESXi does not workaround for a buggy BIOS.  The privileged setting, that you reference is available in hosted only products.

• where can I report a problem with a virtual machine died, which I can't save now?

  It looks like a lot of places, but it is not clear where I should take this problem to.

  where can I report a problem with a virtual machine died, which I can't save now?

  He is buried in the VMware Community Infrastructure - here is the link to this forum - http://communities.vmware.com/community/vmtn/server/vi/esx3.5

• With the help of gsoap/C++ web SDK problem reconfiguring the Virtual Machine

  Hi all, I m using gsoap/C++ with web service sdk to monitor virtual machines.

  I m able to enumerate the current list of virtual machines, total number of vm. Now I m trying to reconfigure the virtual machine. My Code snippet is as below.

  The virtual machine is running and I m trying to change the ram, I did it using java api and it doesn't butfor c ++ it is in error.

  ns1__VirualMachineConfigSpec vmSpec;

  ival long 64;

  vmSpec - & gt; memoryMB = & ival;

  ns1__ReconfigVMRequestType reconfigVMRequestType;

  reconfigVMRequestType.spc = & vmSpec;

  reconfigVMRequestType._USCOREthis = vmObject - & gt; obj; managed object - virtual machine

  NS1_ReconfigVM_USCORETaskResponse reconfigVMResponse;

  ns1__ManagedObjectReference * morResult = 0;

  If (vim - & gt; __ns1__ReconfigVM_USCORETask (reconfigVMRequestType, & reconfigVMResponse) == SOAP_OK) {}

  morResult = reconfigVMResponse.returnval;

  } else cost & lt; & lt; "Unable to machine virtual reconfig." & lt; & lt; ENDL;

  Now in vSphere Client it show me error like.

  The operation is not supported on the object.

  And on server esxi in file /var/log/vmware/hostd.log it not show gives following error.

  The task was created: haTask-32 - vim.VirtualMachine.reconfigure - 1422

  2009-08-26 20:54:17.669 verbose 149A5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure: (vim.vm.ConfigSpec) {}

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  2009-08-26 20:54:18.122 149A5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_ON - & gt; VM_STATE_RECONFIGURING)

  2009-08-26 20:54:18.125 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Memory hot asked.

  Load: Existing file loading: /etc/vmware/license.cfg

  2009-08-26 20:54:18.139 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Verified hot license

  CloseSession called for the session id = 52f7f6aa-3ef8-c52a - 815 a - 75B 421405075

  Event 714: Root user is disconnected

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: version 32 overflow name aggregation

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: aggregate the version 32 overflow triggeredAlarmState

  2009-08-26 20:54:18.979 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Current state of the VM management: disabled

  2009-08-26 20:54:19.071 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Implementation State of follow-up to the virtual computer for people with reduced mobility.

  Ability to root pool has changed to 1104 MHz / 521MB in 1104 MHz / 520MB

  2009-08-26 20:54:21.108 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Remove hot memory not supported: newMemory: 64, curMemory: 128

  2009-08-26 20:54:21.110 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Batch hot failed during the application of the individual changes.

  2009-08-26 20:54:21.113 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure is not

  2009-08-26 20:54:21.114 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Exception that is thrown when the statement reconfigures: {(vim.vm.ConfigSpec)

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  vmodl.fault.NotSupported

  2009-08-26 20:54:21.177 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_RECONFIGURING - & gt; VM_STATE_ON)

  2009-08-26 20:54:21.180 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Authentication data that are not available during activation

  Event 715: Reconfigured Win Vista on kudosiesxi118 ha-data center

  Change of State received for VM ' 32 "

  2009-08-26 20:54:21.598 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Time to pick up some config: 415 (MS)

  Task completed: error status haTask-32 - vim.VirtualMachine.reconfigure - 1422

  Add vm 32 to poweredOnVms list

  2009-08-26 20:54:21.694 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure the worker thread failed

  Problem in the virtual machine is in the power on State or I m doing something wrong?

  Can any body tell me where I m wrong?

  Rather than use a C string, try using the String object.  In my C++ sources generated the WSDL, the expected properties are string objects and references to string objects, not strings C.

• How to make the virtual machine in 64-bit with VMware6.5

  My CPU: AMD Turion 64 * 2

  Operating system: Windows xp 32

  Question:

  I want to run Open solaris 2008 which is 64 bit, I did a virtual machine but it is 32-bit. You tell me how to make the virtual machine in 64 bits in VMware6.5, I really appreciate.

  Yes.  Power off the virtual computer.  Change the settings.  Change the guest OS to Solaris 10 to Solaris 10 64-bit.

• Problem with internet connection 64-bit Windows Vista, unexplained intermittent failure.

  original title: PROBLEM CONNECTING WINDOWS VISTA 64 BIT INTERNET - UNEXPLAINED INTERMITTENT OUTAGES

  On HP a6542p PC with factory installed Windows Vista (64-bit), Vista operating system program does not take account of Internet broadband, which, in reality, a good connection.  for the first 2 years of operation, the PC internet connection worked well, but a year ago, he started this OFF intermittent / WE internet problem.  SOMETIMES, I can manage to temporarily restore the internet after running randomly across the machine diagnostic & installation programs available to the home screen, OR SOMETIMES also after running REGEDIT in the start (search) bar and watching the TCP/IP settings (do not change them, just watch), but the internet connection drops again after the machine is idle for a few minutes.  I get very tired of the exercise Dog & Pony to run through the different random procedures & hoping that something will work.  I tried the fix from Microsoft using a flashdrive D/L from the Windows site to my XP machine and tried a few manual corrections proposed on various websites, but nothing seems to work.  I have no HP manufacturer disk to reload the Vista operating system.  The connection is good, the cable is good, but Vista gives me contradictory information about the diagnosis, such as ERROR 815, and he tells me also a cable is disconnected (not true, the cable is plugged & good & works very well when the Vista connection is restored), while another diagnostic message indicates the internet connection is good, at the same time other messages say is not.   What can I do to fix this problem in Vista?  Personal e-mail is: * address email is removed from the privacy * -I will check that URL of Web site for the possible answer.    Thanks in advance.

  Imrand - Thanks for the tip, I tried it & it didn't work.  However, I found an update of the HP driver for the network card Realtek in my machine, & after d/l this new driver, the problem seems to be fixed.  The Web connection is still good after several cycles of closing & reboot.  I'm not sure, because with this HP Vista PC, I can never be sure of anything, but I think the problem might be due to the rotating system off the NETWORK adapter in sleep mode, & so not put on when waking up.  Diagnostics messages confused and contradictory pages of different screen Windows were of NO use, it looks like the internet connection was good (which it was), while the other would be at the same time say there is no connection due to the disconnection of the cable, while the other at the same time say that the DNS server broadband couldn't recognize my internet query.  Total BS of Vista, which has compounded the problem than he was.  I only am not surprised Microsoft abandoned the Vista operating system so fast, so many other users of Vista have similar internet connection problems.  The user friendly and very stable XP operating system I have on an old PC of Insignia is my favorite.  Microsoft had to quit with it, IMO.

  Thanks for your help, Cimarron

• Machine virtual Windows 7 - freezes\reverts of the screen when going from Windowed to full screen and vice versa.

  I use a Win7 box with a Machine virtual Win7 on it.  When I started using the VM, it should start and login and work very well.  Shortly after I started having the following problem.  It loads in windowed mode, so I me the welcome greenish\blueish after cutting inside.  If I wait for the Office to load, when I do the full VM screen, it goes full screen then the screen goes to the Welcome screen again, but it's just a static image.  It won't change until I have send a Ctrl-Alt-Del command.  Can I get the normal window with options for logging, start the Task Manager, etc..  If I press ESC or click Cancel, it will show the office and I can work on it without problem.

  If I leave full screen mode windowed after that, the same thing happens, except instead of the Welcome screen, I get the screen of Ctl-Alt-Del as a static picture.  Once again, if I send the Ctrl-Alt-Del command, then cancel, I get the office as usual and it will work until I have try to resize the screen again.

  Can someone help me understand what is happening?

  Thanks in advance,

  Joe

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  Hope this information helps.

• Problem with the virtual store to Windows 7 basic, home

  Hello, I have a problem with Windows 7 64-bit home basic e-store. What happened is that I have a program that I use to make small electronic circuits and it was working fine until a few days when I noticed that the design I was doing seemed to be locked - I can open it but I can't open the second tab of the main window, which I should be able to do. After much research I discovered that the problem was caused by the virtual store of Windows - system registers my designs. I need to disable this feature because it prevents me from doing my work. I tried many things including turning off virtual store in REGEDIT and it doesn't change anything. I have another computer with Windows 7 starter and I have no problem there at all. I searched the internet for ideas and found two to this site http://www.askvg.com/how-to-tweak-user-account-control-uac-options-in-windows-vista-home-basic-home-premium/

  In all no joy. Help, please. I would appreciate only the answers that have been tried and tested not something that is supposed to work.

  Thank you, Ed

  (Moved from Windows |) Windows 7 | Performance and Maintenance)

  I have a program that I use to make small electronic circuits and it was working fine until a few days ago.

  Given that things worked fine until a few days ago I would use system restore to set Windows back a week.

• Stretch machine virtual windows on two monitors

  Stretch the window machine virtual windows XP mode across two monitors.

  Windows 7, videocard, NVIDIA G Force 210, two ASUS 23 "monitors a VGA the other DVI

  I can stretch the other windows like adobe reader across two monitors, but the XP virtual machine window can be extended a bit bigger than a monitor. Virtual machine window can be passed a window to each other very well... just not expandable wide two monitors.

  It would be useful for a program of CAD drawing two pages visible at the same time.

  Thank you

  Hello

  The question you have posted is limited to Windows XP Mode and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

• TWO OS on a single machine virtual is possible or po?  (OS on a virtual machine of towing isn't possible tro?)  and thank you

  TWO OS on a single machine virtual is possible or po?  (OS on a virtual machine of towing isn't possible tro?)  and thank you

  Voila now I need to create a machine with a characteristic (two processor two NIC etc...) and the more important the two system c which will be disappointed the win XP and Win server 2003 I have a big prob to find how to do this (this is my problem)

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• 'No operating system found' when you create the new machine virtual de DVD

  Hi, I had problems with the creation of a new machine virtual (Server 2008 R2).  After the initial creation, I turn on - then starts immediately to the network.  I tried to change the boot order in the BIOS and even removed the NIC via Virtual Machine properties.  I built VMs repeatedly using this method.  I use an ISO DVD that I know, I created works.  I select "connect to E:\. "that is my DVD drive on my laptop and have restarted (loses connection every time the DVD player).  I even changed the type of E1000 VMXNET3 network adapter - makes no difference.

  I feel good and truiy perplexed!

  Any ideas?

  You can connect the ISO remote only when the virtual machine is running.

  I suggest you set a delay (or get into the BIOS), in the property of the VM, press ESC during POST to enter the Boot Menu, select CD but wait to confirm.

  Connect the ISO and now start to begin.

  André

• network to access the problem on a virtual computer

  Hello

  I have a server with esxi 4, and I created a new virtual machine. My problem is that I don't know how to configure the ethernet card in my VM.

  The server has a single adapter ethernet, with a public IP address. The network configuration is default of esxi: a physical card connected to a virtual switch. My problem is that I don't know what IP should I give the machine virtual eth0, and how I can tell that this public IP is connected to my virtual computer. Here is my network configuration:

  

  If anyone can help me, I realize that I'm very bad when it comes to networking

  Thank you

  It cannot be the same IP address as the host. Try one upwards or downwards to the IP address of the host. So that nothing else on the network has the same IP address. Make sure you have the right subnet mask and default gateway (the IP address of your router)