Similar Questions

• banner "ID of attachment has a bad format.".

  When I try to send an email from my Hotmail.com account I also get the banner "ID of attachment has a bad format.". I don't have an AutoSignature. Please you are able to help me solve this problem? I was wondering if my email account has been compromised? I use a Mac.

  Thanks in advance

  Hello, Neil

  To better may help you with this question I suggest that you post your question in the help Windows Live forum. Link is below. Thank you.

  http://windowslivehelp.com/

• How can I reapply style to data in a data table Spry HTML CSS?

  Hello.  I have Adobe CS6 installed on my computer and am new to the use of Adobe.  This is my first post.  To learn Dreamweaver, I read the book Adobe Dreamweaver CS6 Classroom in a Book.  I now do the Lesson 13 and will have trouble to do the part up to step 21 on page 342.  I have a Spry data table in two ranks, but he lost the CSS style applied in Lesson 7.  I can't reapply.  For example, the title was drawn on pages 194 and 195 using the legend of table content section.  To try to apply a new style, I chose the title, but did not see the style in the drop of class in the property inspector.  Otherwise, I control-click on the style in the CSS Styles Panel, apply in the context menu has been grayed out.  The following two sections of the Lesson 13, HTML data update and work with XML data seem to work very well however.  The second data table Spry to two rows, using XML data, has all the CSS styles.  The first table used in HTML, the file calendar.html (XHTML)data.  I couldn't find a table called calendar.html in the folder of resources 07 lesson (step 1 on page 184).  There is another difference between HTML and XML tables.  When the XML table has been transformed into a Spry data set, it lost the ID created in Lesson 9.  By following the instructions in step 11, page 343, it was added to the XML table.  The table using HTML data kept his ID when he became a Spry data set.

  Here is a screenshot showing the HTML above and XML tables downstairs.

  I hope someone can explain why the table HTML lost its style CSS and how it can be reapplied.  I tried to carefully follow all of the steps in the book.  Thank you.

  

  Look at the CSS file and, for example, see the following resources

  . Happy section table {}

  do-size: 90%;

  Width: 740px;

  margin left: 15px;

  border-bottom-width: 3px;

  border-bottom-style: solid;

  border-bottom-color: #060;

  border-collapse: collapse;

  }

  He translated means that you apply a style to an array element inside a section element that is inside an element with a class of content.

  Now, take a look at the markup and see

  Classes and green events

  Here we see a table inside an element with a class of content. Compared to the style rule, the section element is missing.

  Add

  and don't forget the closing (
  ) tag. The markup becomes

  Classes and green events

• How to include banner_edge.js in banner.html?

  Hi, my question is simple.

  How to include banner_edge.js in banner.html?

  Our server may not have this file separately for specific reasons.

  But we can give the file to an absolute address.

  edge_includes\edge.5.0.1.min guess a banner_edge.js

  
  

  Thanks for the quick replies

  Without doubt, I've solved my problem...

  change in html file

• Purchase subscription banner HTML charging process in the Library tab.

  Hello!

  Finally, I finished my first banner HTML of the Library tab.

  I have a collection of banners with different types:

  s ' subscribe

  Purchase/download issue

  -itunes link

  -go to another tab

  -Watch the video full screen

  etc.

  Everything works fine. Only one problem - in the process of buying my banner subscription charge four times:

  -After 'Sign In' dialogue > use existing Apple ID

  -before the dialog box 'confirm your subscription.

  -After confirmation (or cancellation)

  - and after the 'Share Your Information' dialog box, I finally got adobeDPS.receiptService.newReceiptsAvailableSignal.

  Is this a normal behavior?

  Thank you!

  The behavior you describe is compatible with other softs DPS.

• Business cards printing Avery: «the WANDERING MARGIN PROBLEM-upper margin question»

  Does anyone have an idea if HP has an idea on how to charge someone to solve this problem of card perforated business stock do not print correctly?  This problem is now all over the internet.

  I intend to consumerist on-site validation in the hope that they would return to the problem.

  And look at all the other posts for business card printing problems that I looked into this forum and no there are no solutions.  And no huge thick shouldn't matter since everyone here has probably seen a HP catch upwards of more than 3 or more sheets of paper and print on the top, okay...

  I suffer from this PROBLEM of MARGIN WANDERING too.  I have

  have the printer of HP all-in-one Officejet Pro L7680, Windows XP, Office 2007, Microsoft Publisher, model Avery 8873.  I did everything correctly.  Always my business cards print perfectly on regular paper and they print directly from the upper part on the expensive card stock.  It's very frustrating.

  I tried the ideas here.  I tried thick paper, map of Photo greeting, best quality and normal quality.  I tried holding my finger on the map slightly as it feeds in.  I tried folding the sides of the card upward slightly.  I get a print one out of every five success.  I'm so freakin disappointed I could scream.  I've been laid off and I put in network and interviews to attend to and I need my business cards!

  Avery people are useless.  They wanted me to call Microsoft!  I kept saying 'Meg' alignment was very good for ordinary and incorrect paper with a stock of cards Avery.  I asked her if she knew thick HP for card stock printer settings.  She told me to call Microsoft.  I wonder if she was in fact an automaton that accepts no responsibility.

  I thought I bought the best brand printer.  I tried the Brother brand.  They are really lousy.  I really expect HP to be better.

  In the end, I got a few cards that are acceptable.  But I've lost 80%!  If you compare them they are not all aligned the same.  With capacities of shit like that I could just my printer scrap and the contract of employment at Office Depot.  Who needs this aggravation?

  Joe

• HP Officejet 4630 e-all-in-one: problem of margin Officejet 4630

  I need to have a few very small margins on a document.  Even if I set the margin to 0, when I print it is always about a 1/2 inch margin and cutting off content that shows well on the page mode.  I use a Mac with os x Yosemite.

  Help please!

  Hello @lauriekeys,

  Thanks for getting back to me about this issue. I'm sorry to hear that the setting without borders could not solve your problem. Now, I'm going to make sure that your driver is properly installed on your Mac OS X 10.10 Operating System. On Mac OS X 10.10 sometimes a generic driver from Apple AirPrint will load on your printer and gives you only the basic printing functionality. To ensure that this is not the case, can I please have you perform the following steps:

  How to check the driver:

  1. click on the menu Apple and then click on System Preferences.

  2. click on Print & Scan

  3. click the name of your printer on the left side, click the sign minus (), then remove the printer.

  4. click the sign plus (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer in the context menu

  

  6. click Add to add the printer to the list.

  7. close Print & Scan

  Once the correct HP Officejet 4630 e-all-in-one printer driver is checked during loading, please try printing your document again.

  If the issue persists, please should I tell you:

  1. what type of program you are using to print the document with the small borders of?

  2. What size is the page that you print with small borders (letter, legal, 4 X 6, etc.)?

  Please let me know if the steps I have provided resolve your problem of margins. I look forward to hear from you!

• Calc problem with fact table measure used in the bridge table model

  Hi all
  
  I have problems with the calculation of a measure of table done since I used it as part of a calculation in a bridge table relation.
  
  A table of facts, PROJECT_FACT, I had a column (PROJECT_COST) whose default aggregate is SUM. Whenever PROJECT_COST was used with any dimension, the appropriate aggregation was made at appropriate levels. But, no more. One of the relationships that project_fact is a dimension, called PROJECT.
  
  PROJECT_FACT contains details of employees, and every day they worked on a project. So for one day, employee, Joe, could have a PROJECT_COST $ 80 to 123 project, the next day, Joe might have $40 PROJECT_COST for the same project.
  
  Dimension table, PROJECT, contains details of the project.
  
  A new feature has been added to the software - several customers can now be charged to a PROJECT, where as before, that a single client has been charged.
  This fresh percentage collapse is in a new table - PROJECT_BRIDGE. PROJECT_BRIDGE has the project, CUSTOMER_ID, will BILL_PCT. BILL_PCT always add up to 1.
  
  Thus, the bridge table might look like...
  CUSTOMER_ID BILL_PCT PROJECT
  123 100.20
  123 200.30
  123 300.50
  456 400 1.00
  678 400 1.00
  
  Where to project 123, is a breakdown for multiple clients (. 20,.30.50.)
  
  Let's say in PROJECT_FACT, if you had to sum up all the PROJECT_COST for project = 123, you get $1000.
  
  
  Here are the steps I followed:
  
  -In the physical layer, PROJECT_FACT has a 1:M with PROJECT_BRIDGE and PROJECT_BRIDGE (a 1:M) PROJECT.
  PROJECT_FACT = > PROJECT_BRIDGE < = PROJECT
  
  -In the logical layer, PROJECT has a 1:M with PROJECT_FACT.
  PROJECT = > PROJECT_FACT
  
  -Logical fact table source is mapped to the bridge table, PROJECT_BRIDGE, so now he has several tables, it is mapped (PROJECT_FACT & PROJECT_BRIDGE). They are defined for an INTERNAL join.
  -J' created a measure of calculation, MULT_CUST_COST, using physical columns, which calculates the sum of the PROJECT_COST X the amount of the percentage in the bridge table. It looks like: $ (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT)
  -J' put MULT_CUST_COST in the presentation layer.
  
  We still want the old PROJECT_COST autour until it happened gradually, it is therefore in the presentation layer as well.
  
  
  Well, I had a request with only project, MULT_CUST_COST (the new calculation) and PROJECT_COST (the original). I expect:
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123. $1000 $1000
  
  I'm getting this for MULT_CUST_COST, however, for PROJECT_COST, it's triple the value (perhaps because there are quantities of 3 percent?)...
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123 $1000 (correct) $3000 (incorrect, it's been tripled)
  
  If I had to watch the SQL, you should:
  SELECT SUM (PROJECT_COST),
  SUM (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT),
  PROJECT
  Of...
  PROJECT GROUP
  
  
  PROJECT_COST used to work properly at a table of bridge of modeling.
  Any ideas on what I got wrong?
  
  Thank you!

  Hello

  Phew, what a long question!

  If I understand correctly, I think the problem is with your old measure of cost, or rather that combines with you a new one in the same request. If you think about it, your request as explained above will bring back 3 rows from the database, that's why your old measure of cost is multiplied. I think that if you took it out of the query, your bridge table would work properly for the only new measure?

  I would consider the migration of your historical data in the bridge table model so that you have one type of query. For historical data, each would have a single row in the bridge with a 1.0 BILL_PCT.

  Good luck

  Paul
  http://total-bi.com

• Problem with a table

  Hello

  Sorry for my bad English.

  I have a problem with a table. I made a table with a script, but when I add a new line, this script will not work in the new lines. I know that I have something wrong, but I do not know the solution. Anyboy help me? You can see the file in http://www.frmgm.jazztel.es/duda.pdf. I am new in programming.

  I thank you very much.

  OK, now I understand... each row that you add to the table changes the somExpression for objects (so that they are unique). The repeating subform Gets a case number, but the rest of the phrase remains the same. If you do not include a number of occurrence, then the 1st appearance is supposed to... that is why only the 1st row is affected. You can build expressions so that you can derive the correct number of occurrence. The click event code would look like this:

  If (xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]").) Casillaverificacion1.RawValue == '0') {}
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = 'hidden ';
  } else {}
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Boton1.presence = "visible";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion1.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion2.access = "open";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion3.access = "readOnly";
  xfa.resolveNode ("Tabla1.Fila1 [" + this.parent.index + "]"). Casillaverificacion4.access = "readOnly";
  }

  You can see that the xfa.resolveNode takes a string that represents the object we want to use. The string is then built and the number of occurrence of the Fila1 subform is derived by obtaining the index number of the subform parent of the object that we clicked (this.parent.index). Occurane numbers are wrapped in [] brackets.  The rest has not changed. You will need to update your code to use this technique.

  Hope that helps

  Paul

• Problem with create table as select (DEC)

  Hello
  
  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
  
  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
  
  Or any other solution to solve this problem?
  
  Thanks in advance

  Sweety wrote:
  Hello

  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.

  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).

  Or any other solution to solve this problem?

  Thanks in advance

  No, this is not possible. You need to get the manuscript of dependent object and create it manually.

• Problem adding new table.

  Hi guys,.
  
  I have problems, add a table to the following SQL statement.
  
  Here's my query work.
  
  SELECT I.SKU_ID,
  DESCRIPTION,
  To_char (I.EXPIRY_DSTAMP, ' DD/MONTH/YYYY') expiry_dt,.
  Sum (case when I.CONDITION_ID is not null Then QTY_ON_HAND else 0 end) AS unavailable,
  Sum (case when I.CONDITION_ID is null Then QTY_ON_HAND else 0 end) AS available
  INVENTORY I SKU S
  WHERE I.SKU_ID = S.SKU_ID
  AND DESCRIPTION = S.DESCRIPTION
  GROUP OF TO_CHAR (I.EXPIRY_DSTAMP, ' DD/MONTH/YYYY'), I.SKU_ID, DESCRIPTION
  ORDER BY I.SKU_ID
  
  Here's the query I'm trying to achieve
  
  SELECT I.SKU_ID,
  DESCRIPTION,
  To_char (I.EXPIRY_DSTAMP, ' DD/MONTH/YYYY') expiry_dt,.
  Sum (case when I.CONDITION_ID is not null Then QTY_ON_HAND else 0 end) AS unavailable,
  Sum (case when I.CONDITION_ID is null Then QTY_ON_HAND else 0 end) AS available,
  SUM (P.QTY_DUE)
  The INVENTORY I, S, PRE_ADVICE_LINE P SKU
  WHERE I.SKU_ID = S.SKU_ID
  AND DESCRIPTION = S.DESCRIPTION
  AND P.QTY_RECEIVED IS NULL
  GROUP OF TO_CHAR (I.EXPIRY_DSTAMP, ' DD/MONTH/YYYY'), I.SKU_ID, DESCRIPTION
  ORDER BY I.SKU_ID
  
  However, when I try to execute the statement I get this error message: Ora-01652: unable to extend temp of 128 segment in tablespace.
  
  Someone at - it means that I can add the data to the statement? Or a way to stop the error?
  
  Thank you, Sam.

  OK, ignore the COUNT_RECS for the minute, what gives you:

  SELECT I.SKU_ID,
      I.DESCRIPTION,
      TO_CHAR(I.EXPIRY_DSTAMP, 'DD/MON/YYYY') expiry_dt,
      SUM(CASE WHEN I.CONDITION_ID IS NOT NULL THEN QTY_ON_HAND ELSE 0 END) AS Unavailable,
      SUM(CASE WHEN I.CONDITION_ID IS NULL THEN QTY_ON_HAND ELSE 0 END) AS Available,
      P_ILV.SUM_QTY_DUE + (NVL(P_ILV.SUM_TL,0) * NVL(S.USER_DEF_NUM_3,0)) AS Sum_Qty_Due,
     P_ILV.SUM_QTY_DUE AS SUM_QTY,
    (NVL(P_ILV.SUM_TL,0) * NVL(S.USER_DEF_NUM_3,0)) SUM_SUPPLEMENT
   FROM INVENTORY I
    JOIN SKU S
    ON (I.SKU_ID = S.SKU_ID AND I.DESCRIPTION = S.DESCRIPTION)
   JOIN (SELECT P.SKU_ID, SUM (CASE WHEN P.TRACKING_LEVEL NOT LIKE 'C%' THEN P.QTY_DUE ELSE 0 END) AS SUM_QTY_DUE,
        SUM(CASE WHEN P.TRACKING_LEVEL LIKE 'C%' THEN P.QTY_DUE ELSE 0 END) SUM_TL
      FROM PRE_ADVICE_LINE P
     WHERE P.QTY_RECEIVED IS NULL
     GROUP BY P.SKU_ID) P_ILV
    ON (S.SKU_ID = P_ILV.SKU_ID)
  GROUP BY TO_CHAR(I.EXPIRY_DSTAMP, 'DD/MON/YYYY'), I.SKU_ID, I.DESCRIPTION, P_ILV.SUM_QTY_DUE, NVL(P_ILV.SUM_TL,0), NVL(S.USER_DEF_NUM_3,0)
  ORDER BY I.SKU_ID
  

• How do I password protect the document HTML library or individual files which are: IE: pictures etc?

  How do I password protect the document HTML library or individual files which are: IE: pictures etc?

  In Windows there is no password protection.

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• Problem updating a table of clusters that contain some gauges

  Hello

  I have problems when I write to an array of clusters that contain some gauges.

  I wrote an example program to illustrate the problem.

  [I create a digital, digital picture].

  I have complete 4 elements of the array with the data.

  If I shoot each element with a function Index Array and write the data in 4 indicator groups independently, I have no problem.

  If I have the wiring of the table of 4 elements in an array of clusters, the needles on the gauges redraw correctly.

  However, simply by moving the mouse on the element table causes the display to redraw this element.

  I played a bit with synchronous display and reporter Panel updates, but they do not seem to affect this behavior.

  Any thoughts?

  A picture of the problem and the VI are attached.

  When something like this pops up I usually try covering the incriminated with a transparent 2D image control.  Controls overlapping sometimes cause problems, sometimes they solve them.

• Problem inserting in table 2D

  Hello

  I am trying to add an item at the end of the rank 0 to a table 2D (5 times).

  Then, add an element at the end of row 1 of table 2D (5 times). etc...

  I get the line of interest with the Board index, then add my new item with picture of compilation and use replace subset of table to the line in the 2D array.

  However, I find myself with an array of 25 x 1 instead of 5 x 5.

  It seems that LV 2012 supports the replacement of a single element of wiring to the input line and col but I am running LV2010.

  The attached .jpg is an excerpt of the original code.

  The attached .vi is an example, I play with to try to understand what I am doing wrong.

  Any help is greatly appreciated.

  Hi eblohm,

  There are two fundamental problems with your VI:

  (1) a table will be always "rectangular". As soon as you add an element to a single line all other lines with also get an item (set to default values) added...

  (2) ReplaceArraySubset will replace existing items only! You try to replace the non-existing elements (aka get your table), it won't work.

  Have you even tried to debug your VI with highlighting to market?

  Possible solution:

  Set your table with the final size! Use ReplaceArraySubset to replace unique elements in your picture!