Problem of recovery Satellite L300D - 12L

Similar Questions

• Satellite L300D - 12L does not work

  Hi, my Satellite L300D - 12L does not work.

  I was on windows and it came with a blue screen with white writing on it. I didn't see what he said.
  It turned off my laptop. Then it restarted. He got to the screen saying: start the system restart and start windows normally.

  I did the repair of launch option. He said windows loads the files then pulls up to the Microsoft loading bar then the screen turns white for centuries, just with the arrow cursor. I tried to leave two repair a normal but get the same.

  What can I do? Any ideas?

  Looks like Windows is damaged. I would run Recovery by pressing zero during power on. Backup your data first, because the rags for HARD drive recovery.

  Also check the RAM. www.memtest.org is a bootable CD or a FD

• Re: Cannot find Win8.1 drivers for my Satellite L300D - 12L

  I tried to find a pilot outreach toshiba firmware for my windows by Satellite L300D - 12 L 8.1 Pro running. Anyone can find on for me. The toshiba website has not one as my laptop is not officially compatible with windows 8.

  Thanks in advance

  Hello

  I assume that your old laptop Satellite is not supported for Win8 or Win8.1.
  More info on what you can read on http://www.toshiba.eu/innovation/generic/windows8_1-message/
  Please check the compatibility of Toshiba matrix. Here you can find out whether your model is supported.

• Satellite L300D - 12L: Error: MISSING BOOTMGR + HDD partition 2 corrupted

  Hello

  I recently bought my L300D - 12 laptop computer in a store Staples close to me (for use at the University). After about 4 months of use, the system seems slow, and yesterday, my laptop started giving me the BSOD messages whenever I tried to boot up the laptop and have to restart.
  I tried to use the safe mode to move all my files on a desktop computer and that seemed to work well sometimes even safemode could not start with a BSOD with [memory management error] coming and sometimes IQRL_Less or equal...
  I can also have accidentally deleted partition HDD 2... but I thought that it would be OK, because I had created a recovery disk already in the days following the purchase, and it works.

  So my problem is this, my laptop is now free of my files as I have carefully their saved with the storage devices removable mass via a defective safe mode; I have used the disk recovery... but clarification, I think I should list step by step what happens when I use the disk...

  (1) "Windows is loading files" (a black screen with a white bar at the bottom)
  Microsoft green loading bar 2)
  (3) utility recovery gray and white décor with "Recovery Utility" box telling me to choose a language (I choose English)
  (4)' Please select the item you want to install and click on [{Next >}.] Current recovery drive size is: 76GB (I choose then with "English (Windows Vista)" highlighted)
  (5)' WARNING: your hard drive will be completely erased. Do you want to continue?' (I click 'OK')
  (6) command prompt appears with the following...

  Verification of the HDD1
  HDD1 not found!
  Try to remove all possible partitions on the HARD disk letters 0...
  Try to remove all the possible partitions on 1 HARD drive letters...
  Microsoft DiskPark_Version 6.0.6001
  Copyright 1999-2007 Microsoft Corporation.
  On computer: MINWINPC

  Disk 0 is now the selected disk.
  DiskPart succeeded in erasing the disc.
  DiskPart succeeded in creating the specified partition.

  Partition 1 is now the selected partition.
  DiskPart successfully assigned the point of letter or get in the car.
  100% complete
  DiskPart successfully formatted the volume.
  DiskPart succeeded in creating the specified partition.

  Partition 2 is now the selected partition.
  DiskPart successfully assigned the point of letter or get in the car.
  100% complete
  DiskPart successfully formatted the volume.
  DiskPart succeeded in creating the specified partition.

  Partition 3 is now the selected partition.
  DiskPart successfully assigned the point of letter or get in the car.
  100% complete
  DiskPart successfully formatted the volume.
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Copy the files of database recovery
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  HTMPREP...
  Boot...
  EFI...
  HDDPREP...
  sources...
  Tools...
  Bootmgr...
  1 file (s) copied.
  Original setenv.ini...
  1 file (s) copied.
  Warn the HTML...
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Unzip the operating system and WinRE
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Set RECO_info_GUID = A5CD0EA6 - 2 = 4E10-8C6B-4902928583FB 02c
  Set RECO_info_imagecount = 2
  Set RECO_info_partnumber = 1
  Set RECO_info_numsplit = 5
  Set RECO_info_bootindex = 0

  Copy of F:\06738XSP.swm to V:\HDDRecovery.SWImg [1/5]
  1 file (s) copied.
  Copy of the CRC files
  1 file (s) copied.
  1 file (s) copied.
  Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [2/5]
  1 file (s) copied.
  Copy of F:\06738XSP3.swm to V:\HDDRecovery.SWImg [3/5]
  1 file (s) copied.
  Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [4/5]
  1 file (s) copied.
  Copy of F:\06738XSP2.swm to V:\HDDRecovery.SWImg [5/5]
  1 file (s) copied.
  Setting permissions access to 'V:\HDDRecovery '...
  Unpack the WinRE...

  L ' ImageX for Windows tool
  Copyright Microsoft Corp. All rights reserved.

  100% step
  The image is applied successfully.

  Unzip the Vista operating system...
  Image x tool for Windows
  Copyright Microsoft Corp. All rights reserved.

  Progress: 0% audit of the Splitloader...
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  Configuration of Split charger
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  ERROR: No BCD on two or a partition!
  Press any key to continue

  (7) an error box comes up with

  "imagex.exe - Application error.
  The instruction at 0x776359c3 referenced memory at 0x527d838c. The memory could not be read.
  Click OK to terminate the program ' (I click OK)

  (8) at the command prompt, I press a key to continue. The cmdprmt stops and everything is empty...

  (9) I restart the computer
  (10) this happens on a black screan

  "BOOTMGR is missing".
  Press Ctrl + Alt + Delete to restart

  (11) the repetitions of cycle no matter how many times I run the recovery disk

  SO! I read a few issues with the recovery discs and most of the time the answers are buy one out of the toshiba site... my question is this...
  Based on my case above... do you think that the error is by damage or internal memory corruption?
  Is the recovery disk I can buy different from the one I created?

  WHAT ON EARTH IS GOING ON WITH MY LAPTOP AND HOW DO I FIX THIS!

  Post edited by: ArthurTYL

  Hello

  This error is interesting:
  > ERROR: no BCD on two or a partition!
  > Press any key to continue

  The BCd is the Vista bootloader which is necessary to load and start the Vista operating system.
  It seems that it is not found and so Vista will not start.

  The next error message saying: BOOTMGR is missing, press Ctrl + Alt + Del to restart would confirm my hypothesis.

  You said that your system slows down considerably.

  Possibly the HARD drive is faulty. I have only this one explanation.
  In your case, the warranty is valid, and I think you should ask the ASP in your country for assistance guys could check the HARD disk and other parts and could replace it.

  Good bye

• Satellite L300D - 12L does not start from CD/DVD drive

  Hello.

  I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
  I also have this problem with my daughter satellite.

  It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

  I tried several discs with similar results.
  Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

  Any ideas greatly appreciated.

  Hello

  Have you tried to boot from the recovery disk Toshiba?

  Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

  That's why check first before you would contact any ASP guy to replace the STRANGE.

  See you soon

• A few problems with the Satellite L300D-243

  Hello

  would be very grateful for help as soon as possible with my laptop. IM of the problems a little with it including:

  -All keys work intermittently and are rarely and when they do they print about 5 or more at the same time or just Don't stop.
  -Constantly locking me (so with the key to deliver its impossible to get in half the time)
  -Seems randomly reboot without doing anything
  -Regularly crashes
  -Uninstalls programs for example. Google chrome and itunes.

  As soon as you turn it on, it does not work and comes up with the black screen with white writing to tell you if you're lucky, it will allow you to click it and system repair

  However, most of the time it used to let keys work and so not let you do anything.

  Any help would be greatly appreciated
  I have so many courses and for studies but can't without my cell phone.

  Thanks in advance :)

  Hello

  How old is your laptop or how much time does the system work on this unit?
  You has never updated the OS?

  I guess that the laptop has not been restored since the purchase. Right?
  Probably the OS is simple confused upward.

  Before you begin the recovery process I recommend to test workarounds bit.
  -Try to clean the system using the software CCLeaner. The CCLeaner is a freeware program that allows you to remove all temporal files and to repair the registry.
  -As a next, you should check the background processes that are running in the background. This can be checked-> the Startup tab in msconfig (in run type msconfig)
  In many cases, the system may be slowed down due to the high amount of processes that are running in the background. But be careful and don t turn off the process that are not known to you.

  But if you are not experienced in these system settings, you should ask someone for assistance or as suggested by Timox, recover the laptop back to factory settings.

  But beware: back up the data before you start the restore!

• Re: Question of memory Satellite L300D - 12L

  Hello

  I bought today the laptop above with 1 GB of memory installed, as a single unit of 1 GB. I already have 2 X 1 GB of the same variety as this laptop takes home, went up to install another unit, which gives 2 GB memory total.

  The laptop does not recognize the additional memory installed unit, it does not matter which slot I put it, what unit I use, is the one that came with the machine or ones I had previously. Crucial.com scanner says that one of the slots is empty, while the system is not recognizing the extra memory.

  They are the same as stated in the manual of instructions, and all have been tested on another machine, so I know they are ok, so what could be the problem?

  Thanks in advance

  Hello

  Please don t get me wrong, but these modules of memory are obviously not one that suits. If I remembered little of people here on this forum reported on the same issue. There must be a compatibility problem.

  Try to get the Toshiba or Kingston modules and they will work well. In your case, you should get the 2 GB module and improve it up to 3 GB.

• Satellite L300D - can't watch movies using a Toshiba DVD player

  Hello

  I have a laptop Toshiba Satellite L300D - 12L and the toshiba dvd player has stopped working.

  The laptop is always able to recognize the dvd as the 'AutoPlay' box appears when a DVD is inserted and says ' DVD RW drive (e :)) "at the top of the follow-up to the title of the film.
  I then click on 'play the DVD using a DVD TOSHIBE movie'... and nothing happens.

  I tried several different DVD, which I know work in other laptops or DVD players.
  I tried by following this link...

  http://www.TechSpot.com/VB/topic27616.html

  and deleted the lowerfilters and upperfilters but that cause problems and I had to perform a system restore.
  I'm running out of ideas and I would like to be able to watch DVD on my laptop again because I don't have a TV or a DVD player.

  Any help would be appreciated.

  Thank you.

  Hello

  It seems that the CD-DVD drive can read the disc, but it seems that the Toshiba DVD Player cannot play video files

  Then maybe you should try to play the DVD using other software like Windows Media Player or VLC player download VLC player this small software and install it
  Then try to play the movie

  I recommend also to install the tool called DVD Player Update Check Tool that you find on the European driver Toshiba page.

  With this tool, you can check your laptop, if your DVD player needs an upgrade and if so, it gives you the download link for version upgrade needed.

• Can I replace the GPU on Satellite L300D?

  Hi, I have a problem with my Satellite L300D.

  From the start after about 15-20 seconds it stops not to reach any screen. I took it to a real PC repair company and after a few days that they be taught me the graphics card had packed and needed replacement for the sum of £ 70. Tell him what I kind a second opinion and spoke to a friend I.T. from my friends who said that we can not just replace the GPU as it is part of the motherboard and it would cost more than £150.

  Could someone advise / tell me who is right, the laptop is about 4 years old. Any help is greatly appreciated

  Thank you very much
  Paul

  In General, your friend IT is right. On mobile laptops graphics card is attached to the motherboard and cannot be replaced or upgraded.

  In such cases service order new mainboard and replace it. Problem is that this new mainboard is quite expensive.

• Satellite L300D - necessary recovery image

  Hello

  I'm trying to restore my laptop to factory settings. It's a Toshiba Satellite L300D and recently it has been infected by the virus of security 2011 windows vista.
  It still works in SafeMode with networking, and safe mode but I n t want to run the risk of more. I tried years ago to make a recovery DVD, but it never worked.

  Now, I tried to retrieve from the hard drive, but he said, he cannot locate HDD 1 and recommended to try to remove the partition numbers which is something that I put t really understand.
  Anyway that I can't get back to factory settings.

  Is this what can I do to get my hands on a recovery image or address this issue. Any help welcome. Thank you

  Recovery image is designed for the specific cell phone model.
  Recovery image contains the operating system, all the drivers needed for some hardware platform and all the other extra stuff like tools and utilities.
  You can try to install this image of recovery of your brother, but I can't say for sure it will work 100%. It can happen that OS load and after a few seconds the blue screen.

  Look, if you like your laptop and you want to use some time, pay the 30 euro for the original recovery disc and problem is solved.
  Otherwise, I must say that this old L300D works well with Windows 7 then maybe it would be a good solution for install you Win7 and have much better OS than Vista old. It is, of course, the most expensive option.

  At the end is only your decision what to do.

• Satellite L300D - corrupted hard drive, no recovery media, no windows key

  I have a Satellite L300D-11V I'm looking for someone who would not go further that a screen blank after windows start logo, and also when you run Startup Repair he would get at this stage even too. Now pressed 0 while starting would not bring to the top of recovery, only an option for Windows Vista.

  With the help of some high end diagnostic software I have diagnosed that the hard drive has several physical defects that could well be the reason for this purpose the reader is better off being replaced. However, because of the mistakes, I am unable to create images of the player via Acronis or similar.

  Buying a new drive no problem, but the person never did no recovery media so it appears I have to buy a Toshiba recovery.

  There is no Windows key on the case anywhere either.

  If I had to buy a Toshiba Recovery, it would be important that I have no Windows key on the presumption that the recovery would be an already activated installation of Vista for laptop?

  Thank you

  > If I buy a Toshiba Recovery, it would be important to have no Windows key on the presumption that the recovery would be an already activated installation of Vista for laptop?
  In this situation best way to solve this is to swap HARD drive, restore disk original order of Toshiba and install Recovery designed for this model laptop image.
  Recovery image should not be enabled. After the installation, it will be activated automatically if you n t need product key of Microsoft for activation.

  Original recovery disk can be ordered on https://backupmedia.toshiba.eu/landing.aspx

  By the way: Win7 32 bit works quite well on this laptop model then perhaps you should install has the version of Win7. Of course if you do this, you need legal product key.
  Anyway it has nothing to do with Microsoft sticker placed on Toshiba laptops. This key cannot be used for activation anyway.

• Need a new disc of recovery for Satellite L300D

  My grandson got a Satellite L300D for Christmas and lost the recovery disk that came with it... He now has a problem where the laptop does not start and the drive needs.

  Anyone know where I can download one or get a new one. I would try to repair the Vista before going down to any other route. Mind you, I'm only a novice myself and not very technical. Thank you

  Hello

  Recovery image can not be downloaded, but you can order the new recovery media.
  You can do so under the https://backupmedia.toshiba.eu/landing.aspx

  Bye and good luck

• Recovery Disc Creator Error - Satellite L300D

  Hello

  First of all, sorry for my English, but it is not my mother tongue. About my technical problem is very simple: I use Toshiba Satellite L300D-13 b with Vista 32 bit. I tried to create a recovery using Toshiba Recovery Disc Creator disc, but when I start the program (Toshiba Recovery Disc Creator) gives me this error:
  "Cannot find the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer.

  How can I create my recovery disk?

  Thank you.

  Hello

  New Toshiba laptops are delivered without recovery CD/DVDs and using Toshiba Recovery creator tool, you must create one. Toshiba has delivered laptop with factory settings. that means recovery image is recorded on the second partition in the file called HDDRecovery.

  When you start the creator Toshiba Recovery tool it contains the data of this file and burn it to support empty. If this file is removed or deleted the application clearly says the file / data that is / are missing.
  I don't know what you've done in the past, but now, you will not be able to create this recovery DVDs.

  You can order the new copy under https://backupmedia.toshiba.eu/landing.aspx
  Of course it is not for free and you pay for it.

  Good bye

• Satellite L300D - error recovery disc creator

  I have a Satellite L300D and you must return to the original settings. But the recovery disk didn't work (C:\Program Toshiba Toshiba Recovery Disc Creator\TRORDCLauncher.exe the specified path does not exist). Now I dind't know what to do.

  you have burned a disc before recovery? I ask because it's not possible to make it more - the specified path does not exist

• Re: Satellite L300D - HARD drive with unknown password recovery?

  I recently bought a Toshiba Satellite L300D of second hand to a colleague and went on to restore its framework Moose per HARD drive recovery according to the guide of Toshiba
  Link: [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm]

  I get to part 3 and find a current user name, to which the previous owner has no knowledge of, or a password in order to continue the process. Does this mean that the previous owner has locked the recovery process or there at - it a way to recover the system without the password?

  Any help would be greatly appreciated

  Hey,.

  Theoretically, you could ask the colleague to the password ;)
  HARD drive recovery is possible if you know the password, otherwise everyone could perform HARD drive recovery and would not be without danger.

  Alternative, you can use the Toshiba recovery disc. It will be the same as the drive HARD recovery, factory settings will be restored too.