Windows 7 will not active but valid as authentic

Similar Questions

• Windows 7 will not activate, but Genuine Advantage confirms the valid installation

  I built my own PC for years. Once a year, or as needed, I backup all my data and reinstall my OS.  This weekend I did the same thing with the copy of Windows 7 Ultimate, I bought at the University that I attended. Installation goes smoothly, however, I get a message that windows cannot activate.  When I click to see the details of the error, it indicates the following information was found about this error:

  Code: 0xC004C003

  Description: The activation server determined that the specified product key has been blocked.

  I have installed since my original disc by using the same key that I used.  I tried to download MGADIAG. EXE and running it. He says the following:

  Diagnostic report (1.5.0540.0):
  -----------------------------------------
  Given WGA-->
  Genuine Validation status: unsupported OS
  Windows product key: *-* - 6HB8B - QGG4R-JGQ97
  The Windows Product Key hash: 8 x + piG9RogYbG0K1bQVzwO0LGvE =
  Windows product ID: 00426-437-1303412-85833
  Windows product ID type: 0
  Windows license type: unknown
  The Windows OS version: 6.1.7600.2.00010100.0.0.000
  Download Center code: LGL54G7
  ID: 63d65159-5776-4269-af48-513fd7aa54e9
  Admin: Yes
  Automatic numbering:
  Registry: 0x0
  WGA version: Failed to retireve file version. -0 x 80070006
  Signature type: unknown.
  Validation of diagnosis:

  Analysis of system data-->
  Scan: complete
  Cryptography: complete

  Notifications of data-->
  Caching the result: n/a
  Refresh of the cache interval: N/A
  Extended notification delay(non-genuine): N/A
  Extended notification delay(un-activated): N/A
  All disabled people: N/A
  Reminder reduced: N/A
  File: No.
  Version: n/a
  Signature Type: n/a

  OGA data-->
  Office status: 111
  Office Diagnostics:

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: 63d65159-5776-4269-af48-513fd7aa54e91.5.0540.06.1.7600.2.00010100.0.0.000*-*-*-*-JGQ9700426-437-1303412-858330S-1-5-21-2689397080-402331528-3160992895power O.E.M. power O.E.M. American Megatrends Inc.. P1.80 20090708000000.000000 + 00068B93607018400F804090409US Mountain Standard Time(GMT-07:00)111    

  I went to the site of Genuine Advantage and downloaded the advantage genunie validation tool, and once executed, it takes me to a page that says welcome in Windows. Because it is installed on your Windows PC is genuine, enjoy the security, the reliability and the protection it offers.

  Someone at - it a preview?

  Have you tried to activate by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Also, try the following:

  Credit Noel Paton:

  1) click the Start button.
  (2) type: CMD.exe in the field "search programs and files".
  (3) right click on CMD.exe and select run as administrator
  (4) type: net stop sppsvc (it may ask you if you're sure, select Yes)
  Note: the Software Protection service may not be running, that's ok.
  (5) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
  (6) type: Rename tokens.bar tokens.dat
  (7) type: cd %windir%\system32
  (8) type: net start sppsvc
  (9) type: slui.exe
  (10) after a few seconds of activating Windows dialog box will appear. You may need to reactivate and/or re - enter your product key or Activation can occur automatically.
   
  Run the MGADiag again and post the report

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows Update will not be update__

  Windows Update will not update
  but all other internet activities are very well

  This isn't the firewall

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058
  http://support.Microsoft.com/kb/883825

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• Windows 7 will not be activated. With the help of a legitimate license key.

  Windows 7 will not activate... With the help of a legitimate license key.

  Have you tried to activate by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Hello

  ·         Is that what the problem is with a specific file extension?

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the steps below to solve the problem:

  Method 1:

  If you have problems of location of the files, folders, or other items on your computer, try using the search and indexing of troubleshooting to solve the problem. It ensures that the Windows Search service is running and checks if you have the correct permissions to search all the directories on your computer.

  See the article below for additional information and steps.

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2:

  Also I ask you to re - index files and then check. Follow the artticle below for the procedure.

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  See also:

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helps.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite P850 - Windows 8 will not restart properly

  Does anyone know why Windows 8 will not restart correctly on the laptop Satellite P850?

  It seems that whenever I have to restart, especially after the installation of an update, it crashes right on the screen of "Reboot" and I usually find myself having to hold the power button down to completely stop and then turn upwards again. Sometimes, I still have to do to make it stop.

  I would be very grateful for any help that anyone can give me please.

  I have no idea why the Windows 8 will not restart correctly, but this document should help you to repair or restore the system of Windows 8 on your Satellite P850

  + Windows 8 recovery & Repair +.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Please post comments if this helped and how you can solve this problem!

• Windows Update will not download, just stays at 0%

  Hi, past the month or so my windows update will not download at all. I never had no problems until now. Im running on windows 7 64. I'll start, click windows update and download hit. Once I have click on windows update, it just sits there with the bar running, showing me his 0%. Please if someone might know a solution, that would help a lot.

  Yes.  I had the same problem, I installed the update when my power went out, so I couldn't download it, but managed to get the update that I needed the microsoft Web page and we smooth sailing since then.

• Windows Update will not install, I get message 0.800700005.

  Windows Update will not install, I get message 0.800700005.  I'm not available updates when I shut down my computer and cannot access Internet Options in the Tools menu of WE.  Computer works well but no updates or the Option settings. Help

  Hello

  1 update you are trying to install?
  2. don't you make changes on the computer before the show?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the supplied knowledge base article and check.
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Method 3:
  You can try the steps and check if you are able to install the update.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Windows XP will not validate

  my windows xp will not validate .am already registered under Ben Torrez not sure wats past .in moving my copy of xp with key code came missing

  To validate, the system must first be enabled.

  You may need to use the phone activation...

  To activate by phone: -.
  Activation by phone, click on the Start button and type:
  slui 4
  in the search box and then press the Enter"" key.
  This will bring up the activation of the phone dialog window.
  Follow the steps indicated by the window.
   
  If need phone normal activation fails, recompose the number, and this time do NOT respond when the ansafone asks that maintain you - this should oblige the operator to pick up that can solve your problem.

• Unable to use wireless internet. In addition, my windows update will not be installed.

  Original title: extended error code = Oxfof4

  I have a couple of different symptoms. My laptop acts like it doesn't even have wireless capabilities although the exact model the same sitting next to her was a strong wireless signal (I still had internet capability on this laptop also). In addition, my windows update will not be installed.  I checked "Event Viewer" in system tools and have all sorts of errors. Error service Control Manager, "Warning b57w2k", code error Windows Update Agent and more. Still, the laptop doesn't move and accesses files, but no internet. I scanned with AVG and Malwarebytes 0 infection. Uugh!  Any suggestions?

  Many laptops have a switch that turns on or off the wireless radio.  This can be a physical switch somewhere on the laptop or a combination of the Fn key and one of the F keys.  Read the user manual for the laptop for more details.

  The warning includes "b57w2k" seems to be linked to a Broadcom NetXtreme 57xx Gigabit Controller (not wireless, wired).  You can click the copy (just below the up/down arrows) on the property sheet for the event and paste the content in your next post here.

  In general, the report that you have 'all kinds of errors' in Event Viewer is not very useful.  We do not understand what you're watching.

• Pavillion23: Windows 7 will not be updated. I get error code 800706F7.

  Windows 7 will not be updated. I get error code 800706F7. I removed the update painful KB304394, which of course still blocking updates, earlier. Since then, I find in the history of the update that almost most of the windows update attempt failed.  (A couple for Windows Defender succeeded). Now, when I try to install an update manually, I get the 800706F error code.

  This is what Windows Update tells me on the article that I tried to install:

  Update for Internet Explorer 11 for Windows 7 for x 64-based systems (KB3025390)

  Download size: 190 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to resolve problems in Windows. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/3025390

  Help and Support:
  http://support.Microsoft.com

  Yes, I have same problem of yours, I've finally updated all those win updates, now that I started some bloggers advice what to do to solve these problems. I actually had a problem with a crash suddenly and blackout of screen and other unusual tracks on this desk, until the February MS cannot install updates. what I've done, I've tried the [FSC.exe] System File Checker, see him through YouTube "how to use FSC,"... Solved problems of 100%, but it depends on the number of files that can not be repaired, my results are minor just repair corrupt files... Try it...

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• Windows Update will not update. Get codes 641, 80070641 and 8004FF01. Fix on Microsoft won't fix it. He said that the Windows Installer is not installed correctly. How can I solve this problem?

  Since May 8, 2012, I have not been able to get updates of thje automatically updated.  It worked fine before the 8th.  I open Windows update and click the update and I have 3 different errors.  The error codes are 641, 80070641 and 804FF01.  I downloaded several times the Microsoft Fix It and it fixed 1 thing ad so I ran it again and he said "No problems need Attention."  But he is not always up to date.  I have 18 important updates and they all failed.  Difficulty he installation of Microsoft Center, I had "an unexpected error has occurred.  Setup cannot continue.  Close, and then try again.  Error: installation of window Service could not be accessed.  This can happen if Windows install is not properly installed.  Contact your support staff. »

  What can I do to fix this problem and make the update of Windows to operate?

  Gwen,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-will-not-work-getting-errors-641/dfd4c17e-72c6-47F5-b3fa-6ab64803bbc0>

  UTC/GMT is 23:02 Sunday, July 22, 2012