problem of task - perfect spot in the world is not working properly

Similar Questions

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Hello on the program is not working properly, please return the money to buy other best program and thank you

  Hello on the program is not working properly, please return the money to buy other best program and thank you

  A faulty program that has not been purchased Mali returned from four days

• the trackpad is not working properly after the update to 10.11.4

  Hello

  I've updated my mac pro to the latest OS. However, the trackpad does not work correctly. Sometimes he strives to move the arrow but double click, drag, and all other actions do not work properly.

  Can someone help me out here? Is there a way to reactivate the trackpad or update driver for the trackpad.

  The trackpad is build-in bluetooth no one.

  Thank you

  There are two main troubleshooting steps I suggest to complete to start troubleshooting your touchpad is not responding. These steps are reset of memory NVRAM and the SMC on your Mac and the instructions for each can be found in the articles below.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

• I'm a student of lightroom version 4 and it's on the laptop is not working properly. How can I download on my new laptop?

  The screen on my old laptop is not working properly, so I need to transfer my this laptop to my new lightroom, but I don't know how to do it. Why do I need the CD? Can I just upload it to my account in lightroom? Help, please!

  before you uninstall, disable (help > deactivate) it, if you can.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• What is the problem with new OS El Capitan? First does not work properly

  I just installed the new OS El Capitan, but first gives me a lot of problems. Preview works when I play timeline shape, but when I stop the video preview becomes kind of red with a lot of scratches. Another project does not recognize the clips on the timeline

  I'm in a deep deep deep Sxxx I need to work

  Here, the solution solved the problem for me, that sounds like the same problem I had.

  Re: Premiere Pro graphic problem?

  Best,

  Joel

• Automatic maintenance in the center of the action is not working properly

  Original title: WIN X 64 8.1 maintenance program.

  I've scheduled maintenance program to run every day. If I check if it was done he confirms that he has - BUT usually it is supposed to be run a few minutes, or up to 20 minutes earlier than my check - BUT if I manually start the program lasts only for an hour or more? How can it be? -J' launched a full implementation earlier and she is always being 2 hours later (while I type this see-Manager tasks indicates use of the processor to 57% used by the executable of the service antimalwear - att.) Something is wrong or my idea of system maintenance is far from beam? Answers please.

  

  Hello Anthony,.

  Thanks for your quick response.

  I suggest you to try the two steps.

  Let me explain what is the start-up in minimal mode and what he would do to your computer.

  Clean boot is mainly a technical troubleshooting used to identify and resolve performance issues in the start-up process, including conflicts of software, error messages and more. The usual features, appearance, device support and other optional features may be restricted generally to a clean boot. This is done to help the system administrator to diagnose and identify the problem within each component. When the problem is resolved, the computer can be restarted again to restore all the features and the functionality of a normal operating environment.

  For example, as you described here that you use registry cleaner which is a third-party program and clean boot allows to check if the cleaner registry or any other third-party program is not in conflict.

  In addition, during the execution of boot you will lose any applications or data.

  I would ask you to please post back with the results so that we can help you further.

  Thank you

• View 5.0 unable to communicate 5.0 U1a vCenter - "the service does not work properly.

  This view instance has 4 brokers of the connection running on Windows Server 2008 R2:

  The environment has been upgraded 2 years of view 4.6 see 5.0.  When view 4.6 was used there were 2 additional 32-bit Windows connection brokers in the mix as well, but they were all disabled both in the from view 5.0 5.0 update requires Windows 64-bit. They have been disabled but NOT completely removed from the view.  As part of my troubleshooting this problem, I decided to delete these two brokers disabled connection of the system since it seemed as if they were causing errors in synchronization between brokers.

  Here are my steps, I took this day and in this order as far as I remember the:

  1.) restart vCenterServer services, including the management of VMware webservices

  2.) full restart the server vCenter

  3) Started digging through logs of connection broker to see if something stood in there - found that there was a warning message not being able to connect to https://< vcenterserver >: 443/sdk.  Found a number of articles and posts on the service account no longer works.  Verify that the service account was not locked and that he worked in logging on to the server vCenter via RDP successfully.

  4.) published at the entrance of the vCenter Server View Manager and re-entered the account password and ensure he was still able to connect successfully and that it can.

  5.) other searches on the site of VMware KB and communities find an article indicating that the time on connection brokers can be out of sync.  Double and connected on each of the brokers control the weather was everything in harmony and it is.

  6.) checked to make sure that all LDAP databases are synchronization correctly - this is where I decided to remove former brokers not used environmental and force a replication successful each of the neighbors brokers by using the repadmin utility.

  7.) after forcing replication, I went in a restarted the Mangment vCenter web services again.  -At this point, the connection between the broker and vCenter server came back, but the pool that has a removal pending task has not continued and seemed stuck.

  8.) about 5 to 10 minutes the communication error with the vCenter exploded back up again.

  Also of note, this environment is connected to a different vCenter and working well with no error or stuck tasks.

  Someone at - he of the additional things I should try?

  Thank you

  Jason D.

  Has worked with VMware Support on this and it appeared that the brokers were not quite in sync, even after forced synchronization, I ran previously.  Finish restarting brokers (a both of course) to make things synchronized back to the top.

• A key on the keyboard does not work properly

  Hello

  I have a problem with my keyboard:
  One button of the keyboard doesnâ? t working properly: I want to write a vowel with an accent (as in French and Spanisha? ¦), but if I press the button obtained, then the vowel, the vowel, and TWO dashes (a´a´) appear: a´a´i. normally, it should automatically be a focus on the top of the.

  I tried another keyboard, but Ca? s the same problem when I connect it to my laptop. I also tried to choose another language as the French and Spanish, where they have accents, but it still doesnâ? t work.

  It would be great if someone could help me.

  Thank you very much
  Hanna

  I agree with Weezle. In any case, I have no much experience with it, but I think that some symbols do not appear automatically if you close button only once. There must be something.

  Try to find some information on the pages of Microsoft. This question is not associated with Toshiba.

• Mute the Audio does not work properly

  When the inhibition of the audio in the timeline panel, the audio tracks becomes red and there is no audio while playing the current clip.

  But if I insert a new clip, the audio is played event if the audio tracks are still red. To remove the sound I have to reactivate and mute again.

  The only way I found to get rid of the sound, are to send it to a device airplay with powered speakers, or stop to listen to music while working as a prelude and speakers to a minimum.

  HI zubrick,.

  Thanks for trying to prelude and highlighting the problem.

  I just checked and confirmed that this problem exists is prelude. After the audio muting and a new clip of loading, he keeps silent position tracks but the behavior changes.

  Ideally, prelude does not hold the position of muted after the opening of a new video.

  I'll probably discuss the issue in my team and try to solve it.

  Customer feedback is important to us. continue to write in the case of any confusion.

  Thank you

  Mayjain

• My event actionlistener on the keyboard does not work properly

  Hello world

  In my app iam generating the output so the user types data into the text input field, so iam adding actionlistener to the keyboard,

  the problem is that I did nt get data while typing, I need to wait for a while or need to press on enter or esp keys

  WTS can prbelm someone tell me. Here is my code

  searchInput.prompt = "Search...";      searchInput.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
  
  private function keyDownHandler(event : KeyboardEvent) : void{
  dao.getDatabyKeyword(searchInput.text,onSuccessfullyRetrived);
  }
  //here getdatabykeyword is my database method and on succesfullyretrived is display data method
  no problems with these two methods i tested those.
  

  Try to listen for Event.CHANGE, instead of the keyboard event for the text input control. Standard TextInput meets the text changes. This assumes that the TextInput QNX has been implemented this way and that you use this control.

  If you add a trace (...) to your callback, you say that it is not triggered with the button down events?

• Effects of the copy does not work properly

  Hi all! I use Photoshop CC on my iMac running OS 10.10.5. I have something weird is going on that...... did not occur. When I work with layers and I have an effect (drop shadow and outer glow, for example)... I want to copy this effect exactly as it is to another layer. I was able to do this for years. But now, all of a sudden, when I copy the effect (hold down the option key and do drag the effect to one layer to another), it copies... but the size increases significantly. For example, I put an outer glow on a photo (size 49). I wanted this glow even on another image. I held down option and dragged the glow on the second photo effect. All the other settings copied correctly, but the size is 204... not 49. Is something new that I don't know? Or is it a setting somehow, I screwed up? Thank you.

  Julie

  If it used to work and now it back not. Try resetting all the Photoshop tools. If that does not solve your problems trying reset you the Photoshop preferences. ;

• The new 2 - up display to slide the trimming does not work properly, but cannot be disabled, it can?

  The new feature "composite is displayed instead of 2 a display edit point in the program monitor when removing drag in the timeline", which has been mentioned by Adobe staff in the post http://blogs.Adobe.com/PremierePro/2015/06/Premiere-Pro-CC-2015.html is slowing down the process of cutting EXTREMELY once the project has reached a certain length / size. As soon as I start dragging a handle of any object in the timeline, the 2 - up view is displayed, but needs in larger projects extremely long to load / refresh any changes.

  Note: I don't speak from the view of normal cut, I don't speak of the forced 2 display that appears as soon as I start by dragging a handle in the timeline!

  The BIG problem is, I can't turn it off. Or can I? Is there a way to fix this? Or at least a way to disable it?

  Premiere Pro on Windows 10 2015 CC (had the same problem before the update to Win 8.1.)

  GeForce GTX 780

  Thank you!

  A check the box of "Composite overview over Trim" in the timeline menu, the key near the chronology of the timecode.

• Calculation of the position of the slider is not working properly with a sensible step

  Hello

  I already wrote in another thread on this subject, but my problem is slightly different from the other discussion, so here's one more time:

  I want to display a symbol next to the slider. He should stay there as in this example here: http://sandbox.junglecrowd.org/static/publish/web/static.html

  When you use a sensible step (which is essential for my project, because I need width of 100% on all window sizes) ot the symbol placement is dependent on the window size and position on the screen. Here is an example of the problem:

  http://sandbox.junglecrowd.org/responsive/publish/Web/responsive.html

  Then, collecting the coordinates to the breast of EA seems not to be the right way... Or does anyone know a solution to compensate for the changes?

  My idea would be to get the coordinates outside the EA... would it be possible? And in what way?

  .. of course, other solutions are welcome!

  Here is my code... As you can see I am very new to EA and coding...

  Thank you!

  BTW: I read a lot of things in this forum before because of other problems, and I found many solutions: thank you all!

  CompositionReady

  SYM.createsym = function() {}

  var position = sym.$("box").show ();

  position2 var = sym.$("text").show ();

  position. CSS({)

  Top: sym.posY, left:sym.posX

  });

  position2. CSS({)

  Top: sym.posY, left:sym.posX

  });

  };

  Stage.MouseMove

  sym.posX = e.pageX + 30;

  sym.posY = e.pageY;

  SYM.createsym ();

  I discovered a solution now!

  I take the width of the window and make a report with the width of the stage variable... The stageratio then gets multiplied with the details... When resizing the window, variables are recalculated...  Here's a working example:

  http://sandbox.junglecrowd.org/responsive_works/publish/Web/responsive .html

  Here's the code... If anyone knows how to do to improve it please tell me

  CompositionReady

  SYM.xycompensation = function() {}

  var point = sym.$('Stage');

  var parent = sym.$('Stage').parent ();

  var parentWidth = stage.parent () .width ();

  var stageWidth = stage.width ();

  SYM.scaleratio = stageWidth/parentWidth;

  };

  SYM.xycompensation ();

  $(window) .one ("Resize", function() {}

  SYM.xycompensation ();

  });

  sym.infoLabel = function() {}

  var position = sym.$("box").show ();

  position2 var = sym.$("text").show ();

  position. CSS({)

  Top: sym.posY, left:sym.posX

  });

  position2. CSS({)

  Top: sym.posY, left:sym.posX

  });

  };

  Stage.MouseMove

  sym.posX = e.pageX * sym.scaleratio + 30;

  sym.posY = e.pageY * sym.scaleratio;

  sym.infoLabel ();